References
- Ahmadzadehtalatapeh, M., and H. R. Rashidi. 2020. Performance enhancement of gas turbine units by retrofitting with inlet air cooling technologies (IACTs): An hour‑by‑hour simulation study. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42 (139):1–29. doi:https://doi.org/10.1007/s40430-020-2216-7.
- Air Movement and Control Association International, INC. ANSI/AMCA Standard 205-19: Energy Efficiency Classification for Fans. https://www.amca.org/publish/standards/. 2014.
- Akhtari, M. R., I. Shayegh, and N. Karimi. 2019. Techno-economic assessment and optimization of a hybrid renewable earth - air heat exchanger coupled with electric boiler, hydrogen, wind and PV configurations. Renewable Energy 148:839–51. doi:https://doi.org/10.1016/j.renene.2019.10.169.
- Arabi, S. M., M. Aminy, H. Ghadamian, Ozgoli, H. A., Ahmadi, B. 2017. Thermo-economic analysis of implementing fog-based cooling system in GE-F5 gas turbines (case study). Journal of Heat and Mass Transfer Research 4:73–81. doi:https://doi.org/10.22075/jhmtr.2017.1503.1100.
- Arabi, S. M., H. Ghadamian, M. Aminy, Ozgoli, H. A., Ahmadi, B., Khodsiani, M. 2020. Simulation of a GEF5 gas turbine power plant using fog advanced cycle and a systematic approach to calculate critical relative humidity. International Journal of Engineering 33 (11):2356–64. doi:https://doi.org/10.5829/ije.2020.33.11b.26.
- Arabi, S. M., H. Ghadamian, M. Aminy, H. A. Ozgoli, B. Ahmadi, M. Khodsiani 2019a. Energy performance analysis of GE-F5 gas turbines at off-design conditions by applying an innovative convergent-divergent system for the inlet air cooling. Measurement and Control 52 (9–10):1508–16. doi:https://doi.org/10.1177/0020294019877504.
- Arabi, S. M., H. Ghadamian, M. Aminy, H. A. Ozgoli, B. Ahmadi, M. Khodsiani 2019b. The energy analysis of GE-F5 gas turbines inlet air–cooling systems by the off-design method. Measurement and Control 52 (9–10):1489–98. doi:https://doi.org/10.1177/0020294019877485.
- Arteconi, A., L. Del Zotto, R. Tascioni, L. Cioccolanti 2019. Modelling system integration of a micro solar Organic Rankine Cycle plant into a residential building. Applied Energy 251:113408. doi:https://doi.org/10.1016/j.apenergy.2019.113408.
- Average savings account interest rates for 2020: Compared across banks. Accessed August 3, 2021. https://www.valuepenguin.com
- Bayomy, A., S. Davies, and Z. Saghir. 2019. Domestic Hot Water Storage Tank Utilizing Phase Change Materials (PCMs): Numerical Approach. Energies 12 (11):2170. doi:https://doi.org/10.3390/en12112170.
- Belhamadia, Y., A. S. Kane, and A. Fortin. 2012. An enhancement mathematical model for phase change problems with natural convection. International Journal of Numerical Analysis Model; Series B 3:192–206.
- Castell, A., C. Solé, M. Medrano, J. Roca, L. F. Cabeza, D. García. 2008. Natural convection heat transfer coefficients in phase change material (PCM) modules with external vertical fins. Applied Thermal Engineering 28 (13):1676–86. doi:https://doi.org/10.1016/j.applthermaleng.2007.11.004.
- Deng, C., A. T. Al-Sammarraie, T. K. Ibrahim, E. Kosari, F. Basrawi, F. B. Ismail, A. N. Abdalla. 2020. Air cooling techniques and corresponding impacts on combined cycle power plant (CCPP) performance: A review. International Journal of Refrigeration 120:161–77. doi:https://doi.org/10.1016/j.ijrefrig.2020.08.008.
- Electricity prices. Accessed June 15, 2021. https://www.globalpetrolprices.com/electricity_prices
- Elminshawy, N. A. S., F. R. Siddiqui, Q. U. Farooq, M. F. Addas. 2017. Experimental investigation on the performance of earth-air pipe heat exchanger for different soil compaction levels. Applied Thermal Engineering 124:1319–27. doi:https://doi.org/10.1016/j.applthermaleng.2017.06.119.
- Guo, Y., H. Yang, W. Fu, L. Bai, J. Miao. 2021. Temperature control of star sensor baffle using 3D printing and PCM thermal energy storage technology. International Journal of Heat and Mass Transfer 165 (A):120644. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2020.120644.
- Khan, M. M. A., N. I. Ibrahim, I. M. Mahbubul, H. Muhammad. Ali, R. Saidur, F. A. Al-Sulaiman, et al. 2018. Evaluation of solar collector designs with integrated latent heat thermal energy storage: A review. Solar Energy 166:334–50. doi:https://doi.org/10.1016/j.solener.2018.03.014.
- King, M. L. 1992. Introduction to Durbin and Watson (1950 1951) testing for serial correlation in least squares regression. Springer: I, II, Breakthroughs in Statistics. doi:https://doi.org/10.1007/978-1-4612-4380-9_19.
- Korn, G. A. 2007. Advanced Dynamic-system Simulation: Model-replication Techniques and Monte Carlo Simulation. 1st. USA: John Wiley & Sons
- Ma, T., Z. Li, and J. Zhao. 2019. Photovoltaic panel integrated with phase change materials (PV-PCM): Technology overview and materials selection. Renewable and Sustainable Energy Reviews 116:109406. doi:https://doi.org/10.1016/j.rser.2019.109406.
- Mahmoud, M., M. Ramadan, K. Pullen, A.Abdelkareem, M. et al. 2021. Waste heat recovery applications incorporating phase change materials. In Elsevier Chapter book: Reference Module in Materials Science and Materials Engineering, Amsterdam, Netherland. https://doi.org/10.1016/B978-0-12-815732-9.00074-7
- Manfrida, G., R. Secchi, and K. Stańczyk. 2016. Modelling and simulation of phase change material latent heat storages applied to a solar-powered organic rankine cycle. Applied Energy 179:378–88. doi:https://doi.org/10.1016/j.apenergy.2016.06.135.
- Mofijur, M., T. M. Indra Mahlia, A. S. Silitonga, H. Ong, M. Silakhori, M. Hasan, N. Putra, S. M. Rahman, et al. 2019. Phase Change Materials (PCM) for solar energy usages and storage: An overview. Energies 12 (16):3167. doi:https://doi.org/10.3390/en12163167.
- Moghadasi, M., N. Izadyar, A. Moghadasi, and H. Ghadamian. 2021. Applying machine learning techniques to implement the technical requirements of energy management systems in accordance with ISO 50001: 2018, an industrial case study. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 1–18. doi:https://doi.org/10.1080/15567036.2021.2011989.
- Moghadasi, M., H. A. Ozgoli, and F. Farhani. 2021. Steam consumption prediction of a gas sweetening process with methyldiethanolamine solvent using machine learning approaches. International Journal of Energy Research 45 (1):879–93. https://doi.org/https://doi.org/10.1002/er.5979.
- Mohsenian, H., H. Ghadamian, A. A. Hamidi, Najafian, N., Baghban Yousefkhani, M. 2017. Energy waste reduction in central heating systems by new type of expansion tank. Journal of Energy Management and Technology (JEMT) 1 (3):13–20. doi:https://doi.org/10.22109/jemt.2017.89998.1021.
- Motte, F., G. Notton, C. Lamnatou, C. Cristofari, D. Chemisana . 2018. Numerical Study of PCM Integration Impact on Overall Performances of a Highly Building- Integrated Solar Collector. Renewable Energy 137 (C):10–19. doi:https://doi.org/10.1016/j.renene.2017.12.067.
- Ozgener, O., L. Ozgener, and D. Y. Goswami. 2011. Experimental prediction of total thermal resistance of a closed loop EAHE for greenhouse cooling system. International Communication in Heat and Mass Transfer 38 (6):711–16. doi:https://doi.org/10.1016/j.icheatmasstransfer.2011.03.009.
- Palacios, A., A. D. Gracia, L. Haurie, L. Cabeza, A. Fernández, C. Barreneche 2018. Study of the thermal properties and the fire performance of flame retardant-organic pcm in bulk form. Materials 11 (1):117. doi:https://doi.org/10.3390/ma11010117.
- Prieto, C., and L. F. Cabeza. 2019. Thermal energy storage (TES) with phase change materials (PCM) in solar power plants (CSP); Concept and plant performance. Applied Energy 254:113646. doi:https://doi.org/10.1016/j.apenergy.2019.113646.
- Purchasing Carbon Offsets FAQs. Accessed September 9, 2021. https://secondnature.org/climate-action-guidance/purchasing-carbon-offsets-faqs
- Rosa, N., N. Soaresa, J. J. Costa, P. Santos, H. Gervásio 2020. Assessment of an earth-air heat exchanger (EAHE) system for residential buildings in warm-summer Mediterranean climate. Sustainable Energy Technologies and Assessments 38:100649. doi:https://doi.org/10.1016/j.seta.2020.100649.
- Saunders, E. A. D. 1998. Heat exchangers, selection, design and constructions. 1st. Michigan, USA: Longman scientific and technical, Longman group UK limited
- Seidabadi, L., H. Ghadamian, and M. Aminy. 2019. A novel integration of pcm with wind-catcher skin material in order to increase heat transfer rate. Int. Journal of Renewable Energy Development 8 (1):1–6. doi:https://doi.org/10.14710/ijred.8.1.1-6.
- Singh Rathore, P. K., and K. Shukla. 2019. Potential of macro encapsulated PCM for thermal energy storage in buildings: A comprehensive review. Construction and Building Materials 225:723–44. doi:https://doi.org/10.1016/j.conbuildmat.2019.07.221.
- Technical data sheet of carbowax™ polyethylene glycol (PEG) 1000. Accessed November 15, 2017. www.carbowax.com
- UL 60335-2-40. 2019. standard for household and similar electrical appliances - safety - part 2-40: particular requirements for electrical heat pumps, air-conditioners and dehumidifiers, Ed. 3 rd. www.standardscatalog.ul.com. Accessed 15 Sep. 2021
- Vigneshkumar, N., M. Venkatasudhahar, P. Manoj Kumar, Ramesh, A. et al 2021. Investigation on indirect solar dryer for drying sliced potatoes using phase change materials (PCM). Materialstoday: Proceeding 47 (15):5233–38. doi:https://doi.org/10.1016/j.matpr.2021.05.562.