267
Views
2
CrossRef citations to date
0
Altmetric
Research Article

Experimental Investigation on the Effectiveness of Biodiesel Based Sulfur as an Additive in Ultra Low Sulfur Diesel on the Unmodified Engine

ORCID Icon, ORCID Icon & ORCID Icon
Pages 2697-2714 | Received 11 Oct 2021, Accepted 17 Mar 2022, Published online: 18 Apr 2022

References

  • Aydın, S. 2020. Comprehensive analysis of combustion, performance and emissions of power generator diesel engine fueled with different source of biodiesel blends. Energy 205:118074. doi:10.1016/j.energy.2020.118074.
  • Bari, S. 2014. Performance, combustion and emission tests of a metro-bus running on biodiesel-ULSD blended (B20) fuel. Applied Energy 124:35–43. doi:10.1016/j.apenergy.2014.03.007.
  • BP. 2020. Statistical review of world energy. Statistical Review of World Energy 69:1–56. bp.com/statisticalreview
  • Cao, D. N., A. T. Hoang, H. Q. Luu, V. G. Bui, and T. T. H. Tran. 2020. Effects of injection pressure on the NOx and PM emission control of diesel engine: A review under the aspect of PCCI combustion condition. Energy Sources, Part A: Recovery, Utilization and Environmental Effects 7036. doi:10.1080/15567036.2020.1754531.
  • Chan, C. H., S. W. Tang, N. K. Mohd, W. H. Lim, S. K. Yeong, and Z. Idris. 2018. Tribological behavior of biolubricant base stocks and additives. Renewable and Sustainable Energy Reviews 93 (May):145–57. doi:10.1016/j.rser.2018.05.024.
  • Chandra Srivastava, V. 2012. An evaluation of desulfurization technologies for sulfur removal from liquid fuels. RSC Advances 2 (3):759–83. doi:10.1039/c1ra00309g.
  • Gautam, R., and S. Kumar. 2020. Performance and combustion analysis of diesel and tallow biodiesel in CI engine. Energy Reports 6:2785–93. doi:10.1016/j.egyr.2020.09.039.
  • Gautam, R., N. Kumar, H. S. Pali, and P. Kumar. 2016. Experimental studies on the use of methyl and ethyl esters as an extender in a small capacity diesel engine. Biofuels 7 (6):637–46. doi:10.1080/17597269.2016.1187538.
  • Geo, V. E., A. Sonthalia, G. Nagarajan, and B. Nagalingam. 2017. Studies on performance, combustion and emission of a single cylinder diesel engine fuelled with rubber seed oil and its biodiesel along with ethanol as injected fuel. Fuel 209 (February):733–41. doi:10.1016/j.fuel.2017.08.036.
  • He, L., H. Li, W. Zhu, J. Guo, X. Jiang, J. Lu, and Y. Yan (2008). Deep oxidative desulfurization of fuels catalyzed by peroxophosphomolybdate compounds in ionic liquids. Catalysis and Reaction Engineering Division Conference, Presentations at the 2008 AIChE Spring National Meeting, New Orleans, LA, April 6-10, 2008, 19, 84–87.
  • Heywood, J. B. 2021. Internal combustion engine fundamentals. Angewandte Chemie International Edition 6 (11):951–52. 2013–2015.
  • Hoang, A. T. 2021. Combustion behavior, performance and emission characteristics of diesel engine fuelled with biodiesel containing cerium oxide nanoparticles: A review. Fuel Processing Technology 218 (April):106840. doi:10.1016/j.fuproc.2021.106840.
  • Hoang, A. T., and A. T. Le. 2019. Trilateral correlation of spray characteristics, combustion parameters, and deposit formation in the injector hole of a diesel engine running on preheated jatropha oil and fossil diesel fuel. Biofuel Research Journal 6 (1):909–19. doi:10.18331/BRJ2019.6.1.2.
  • Hoang, A. T., A. T. Le, and V. V. Pham. 2019. A core correlation of spray characteristics, deposit formation, and combustion of a high-speed diesel engine fueled with Jatropha oil and diesel fuel. Fuel 244 (January):159–75. doi:10.1016/j.fuel.2019.02.009.
  • Hoang, A. T., and V. V. Pham. 2019. Impact of jatropha oil on engine performance, emission characteristics, deposit formation, and lubricating oil degradation. Combustion Science and Technology 191 (3):504–19. doi:10.1080/00102202.2018.1504292.
  • Hoang, A. T., M. Tabatabaei, and M. Aghbashlo. 2020. A review of the effect of biodiesel on the corrosion behavior of metals/alloys in diesel engines. Energy Sources, Part A: Recovery, Utilization and Environmental Effects 42 (23):2923–43. doi:10.1080/15567036.2019.1623346.
  • Hoang, A. T., V. D. Tran, V. H. Dong, and A. T. Le. 2019. An experimental analysis on physical properties and spray characteristics of an ultrasound-assisted emulsion of ultra-low-sulphur diesel and jatropha-based biodiesel. Journal of Marine Engineering and Technology 4177. doi:10.1080/20464177.2019.1595355.
  • Hu, J., J. Liao, Y. Hu, J. Lei, M. Zhang, J. Zhong, F. Yan, and Z. Cai. 2021. Experimental investigation on emission characteristics of non-road diesel engine equipped with integrated DOC + CDPF + SCR aftertreatment. Fuel 305 (August 2021):121586. doi:10.1016/j.fuel.2021.121586.
  • Hu, Z., L. Zhang, and Y. Li. 2017. Investigation of tall oil fatty acid as antiwear agent to improve the lubricity of ultra-low sulfur diesels. Tribology International 114 (April):57–64. doi:10.1016/j.triboint.2017.04.016.
  • Kang, W., B. Choi, S. Jung, and S. Park. 2018. PM and NOx reduction characteristics of LNT/DPF+SCR/DPF hybrid system. Energy 143:439–47. doi:10.1016/j.energy.2017.10.133.
  • Khalife, E., M. Tabatabaei, B. Najafi, S. M. Mirsalim, A. Gharehghani, P. Mohammadi, M. Aghbashlo, A. Ghaffari, Z. Khounani, T. Roodbar Shojaei, et al. 2017. A novel emulsion fuel containing aqueous nano cerium oxide additive in diesel–biodiesel blends to improve diesel engines performance and reduce exhaust emissions: Part I – experimental analysis. Fuel 207:741–50. doi:10.1016/j.fuel.2017.06.033.
  • Konishi, T., E. E. Klaus, and J. L. Duda. 1996. Wear characteristics of aluminum-silicon alloy under lubricated sliding conditions. Tribology Transactions 39 (4):811–18. doi:10.1080/10402009608983599.
  • Kumar, N., A. Sonthalia, M. Tomar, and R. Koul. 2021. An experimental investigation on spray, performance and emission of hydrotreated waste cooking oil blends in an agricultural engine. International Journal of Engine Research 22 (7):2305–17. doi:10.1177/1468087420928734.
  • Nayak, S. K., A. T. Hoang, S. Nižetić, X. P. Nguyen, and T. H. Le. 2022. Effects of advanced injection timing and inducted gaseous fuel on performance, combustion and emission characteristics of a diesel engine operated in dual-fuel mode. Fuel 310:122232. doi:10.1016/J.FUEL.2021.122232.
  • Nicolau, C. L., A. N. V. Klein, C. A. A. Silva, A. R. Fiorucci, J. M. Stropa, E. O. Santos, K. C. S. Borges, R. C. L. Da Silva, L. C. S. De Oliveira, E. L. Simionatto, et al. 2018. Thermal properties of the blends of methyl and ethyl esters prepared from babassu and soybean oils. Journal of the Brazilian Chemical Society 29 (8):1672–79. doi:10.21577/0103-5053.20180040.
  • Panda, K., and A. Ramesh. 2021. Diesel injection strategies for reducing emissions and enhancing the performance of a methanol based dual fuel stationary engine. Fuel 289 November 2020:119809. doi:10.1016/j.fuel.2020.119809
  • Panigrahi, N., M. K. Mohanty, S. R. Mishra, and R. C. Mohanty. 2018. Energy and exergy analysis of a diesel engine fuelled with diesel and simarouba biodiesel blends. Journal of the Institution of Engineers (India): Series C 99 (1):9–17. doi:10.1007/s40032-016-0335-9.
  • Parrish, D. D., J. Xu, B. Croes, M. Shao, M. Xu, X. Fu, M. Danish, M. L. Brusseau, Z. Qiu, and Q. Sui. 2016. Diesel sulfur content impacts on Euro VI soot-free vehicles: Considerations for emerging markets. Frontiers of Environmental Science and Engineering 10 (5):502–12. doi:10.1007/s11783-016-0838-x.
  • Raheman, H., and S. V. Ghadge. 2007. Performance of compression ignition engine with mahua (Madhuca indica) biodiesel. Fuel 86 (16):2568–73. doi:10.1016/j.fuel.2007.02.019.
  • Rajesh Kumar, B., S. Saravanan, D. Rana, and A. Nagendran. 2016. Combined effect of injection timing and exhaust gas recirculation (EGR) on performance and emissions of a DI diesel engine fuelled with next-generation advanced biofuel – Diesel blends using response surface methodology. Energy Conversion and Management 123:470–86. doi:10.1016/j.enconman.2016.06.064.
  • Raman, R., and N. Kumar. 2020. Performance and emission characteristics of twin cylinder diesel engine fueled with mahua biodiesel and DEE. Transportation Engineering 2 (June):100024. doi:10.1016/j.treng.2020.100024.
  • Samuel, O. D., and M. Gulum. 2019. Mechanical and corrosion properties of brass exposed to waste sunflower oil biodiesel-diesel fuel blends. Chemical Engineering Communications 206 (5):682–94. doi:10.1080/00986445.2018.1519508.
  • Sundus, F., M. A. Fazal, and H. H. Masjuki. 2017. Tribology with biodiesel: A study on enhancing biodiesel stability and its fuel properties. Renewable and Sustainable Energy Reviews 70 September 2015:399–412. doi:10.1016/j.rser.2016.11.217
  • Tran, V. D., A. T. Le, and A. T. Hoang. 2020. An experimental study on the performance characteristics of a diesel engine fueled with ULSD-biodiesel blends. International Journal of Renewable Energy Development 10 (2):183–90. doi:10.14710/ijred.2021.34022.
  • Transportation, T. I. C. on clean. 2016. Technical background on India BS VI fuel specifications. The International Council on Clean Transportation 09 (119):9–12. doi:10.4271/2012-01-1274.4.
  • Wei, J., C. He, G. Lv, Y. Zhuang, Y. Qian, and S. Pan. 2021. The combustion, performance and emissions investigation of a dual-fuel diesel engine using silicon dioxide nanoparticle additives to methanol. Energy 230 (X):120734. doi:10.1016/j.energy.2021.120734.
  • Xiao, H., H. Zou, S. Liu, and C. Li. 2019. An investigation of the friction and wear behavior of soybean biodiesel. Tribology International 131 November 2018:377–85. doi:10.1016/j.triboint.2018.10.037
  • Xu, H. T., Z. Q. Luo, N. Wang, Z. G. Qu, J. Chen, and L. An. 2019. Experimental study of the selective catalytic reduction after-treatment for the exhaust emission of a diesel engine. Applied Thermal Engineering 147 October 2018:198–204. doi:10.1016/j.applthermaleng.2018.10.067
  • Zhang, J., H. Luo, X. Yin, Y. Shi, Y. Zhang, and L. Tan. 2021. Surface coating on aluminum substrate with polymeric guanidine derivative to protect jet fuel tanks from microbial contamination. Surface and Coatings Technology 422 (July):127521. doi:10.1016/j.surfcoat.2021.127521.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.