Experimental and numerical investigation on phase change material filled reinforced cement concrete roof slab for mitigating the heat transfer

References

• Al-Waeli, A. H. A., K. Sopian, H. A. Kazem, J. H. Yousif, M. T. Chaichan, A. Ibrahim, S. Mat, and M. H. Ruslan. 2018. “Comparison of prediction methods of PV/T nanofluid and nano-PCM system using a measured dataset and artificial neural network.” Sol. Energy 162: doi: 10.1016/j.solener.2018.01.026.
   Web of Science ®Google Scholar
• Alawadhi, E. M. 2008. “Thermal analysis of a building brick containing phase change material.” Energy and Buildings 40:351–57. doi:10.1016/j.enbuild.2007.03.001.
   Web of Science ®Google Scholar
• Alawadhi, E. M., and H. J. Alqallaf. 2011. “Building roof with conical holes containing PCM to reduce the cooling load: Numerical study.” Energy Conversion and Management 52 (8–9):2958–64. doi:10.1016/j.enconman.2011.04.004.
   Web of Science ®Google Scholar
• Ashok, V., N. B. Geetha, S. Rajkumar, and T. Pauline (2021).“experimental investigations for thermal energy management by encapsulation nano-enhanced bio phase change material in buildings.” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. Accessed 23 August 2021. doi: 10.1080/15567036.2021.1967517.
   Web of Science ®Google Scholar
• Dong, L., Y. Zheng, C. Liu, and U. GuozhongW. 2015. “Numerical analysis on the thermal performance of roof contained PCM of a single residential building.” Energy Conversion and Management 100:147–56. doi:10.1016/j.enconman.2015.05.014.
   Web of Science ®Google Scholar
• Evola, G., L. Marletta, and F. Sicurella. 2013. “A methodology for investigating the effectiveness of PCM wallboards for summer thermal comfort in buildings.” Building and Environment 59:517–27. doi:10.1016/j.buildenv.2012.09.021.
   Web of Science ®Google Scholar
• Gracia, A., C. Fernaandez, A. Castell, C. Mateu, and L. F. Cabeza. 2015. “Control of a PCM ventilated facade using reinforcement learning techniques.” Energy and Buildings 106:234–42. doi:10.1016/j.enbuild.2015.06.045.
   Web of Science ®Google Scholar
• Haider, M., C. Jae D, and A. Mohammed. 2015. “Effectiveness of high reflective roofs in minimizing energy consumption in residential buildings in Iraq.” Procedia Engineering 118:879–85. doi:10.1016/j.proeng.2015.08.526.
   Google Scholar
• Hashem J, A., and A. Esam M. 2013. “Concrete roof with cylindrical holes containing PCM to reduce the heat gain.” Energy and Buildings 61:73–80.
   Web of Science ®Google Scholar
• Iten, M., S. Liu, and A. Shukla. 2016. “A review on the air-PCM-TES application for free cooling and heating in the buildings.” Renew. Sustain. Energy Rev. 61:175–86. doi:10.1016/j.rser.2016.03.007.
   Web of Science ®Google Scholar
• Jin, X., S. Zhang, X. Xiaodong, and X. Zhang. 2014. “Effects of PCM state on its phase-change performance and the thermal performance of building walls.” Building and Environment 81:334–39. doi:10.1016/j.buildenv.2014.07.012.
   Web of Science ®Google Scholar
• Menga, E., J. Wanga, and H. Yub. 2019. “RuonanCaia, YizhongChena, Bo Zhou, “Experimental study of the thermal protection performance of the high reflectivity-phase change material (PCM) roof in summer.” Building and Environment 164:106381. doi:10.1016/j.buildenv.2019.106381.
   Web of Science ®Google Scholar
• Pasupathy, A., L. Athanasius, R. Velraj, and R. V. Seeniraj. 2008. “Experimental investigation and numerical simulation analysis on the thermal performance of a building roof incorporating phase change material (PCM) for thermal management.” Applied Thermal Engineering 28:556–65. doi:10.1016/j.applthermaleng.2007.04.016.
   Web of Science ®Google Scholar
• Pasupathy, A., and R. Velraj. 2008. “Effect of double-layer phase change material in building roof year-round thermal management.” Energy and Buildings 40:193–203. doi:10.1016/j.enbuild.2007.02.016.
   Web of Science ®Google Scholar
• PranaynilSaikia, A., S. Azad, and R. Dibakar. 2017. “Thermal Performance Evaluation of Building Roofs Embedded PCM for Multi-climatic Zones.” Sustainable Energy Technology and Policies, Green Energy and Technology. Accessed 22 December 2017. doi:10.1007/978-981-10-7188-1_18.
   Google Scholar
• Saffari, M., G. Alvaro de, F. Cèsar, and L. F. Cabeza. 2017. “Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings.” Applied Energy 202:420–34. doi:10.1016/j.apenergy.2017.05.107.
   Web of Science ®Google Scholar
• Sami, A. 2002. “Al-Sanea.” Thermal Performance of Building Roof Elements, Building and Environment 37:665–75.
   Google Scholar
• Sandra Raquel Leite da, C., and A. José Luís Barroso de. 2020. “Phase change materials and energy efficiency of buildings: A review of knowledge.” Journal of Energy Storage 27:101083. doi:10.1016/j.est.2019.101083.
   Web of Science ®Google Scholar
• Silva, T., R. Vicente, N. Soares, and V. Ferreira. 2012. “Experimental testing and numerical modelling of masonry wall solution with PCM incorporation: A passive construction solution.” Energy and Buildings 49:235–45. doi:10.1016/j.enbuild.2012.02.010.
   Web of Science ®Google Scholar
• Srinivasan, P. S. S., and M. Ravikumar. 2014. “Heat transfer analysis in PCM-filled RCC roof for thermal management.” Journal of Mechanical Science and Technology 28 (3):1073–78. doi:10.1007/s12206-013-1137-0.
   Web of Science ®Google Scholar
• Tyagi, V. V., D. Buddhi, R. Kothari, and S. K. Tyagi. 2012. “Phase change material (PCM) based thermal management system for cool energy storage application in the building: An experimental study.” Energy and Buildings 51:248–54. doi:10.1016/j.enbuild.2012.05.023.
   Web of Science ®Google Scholar
• Wang, X., Y. Hang, L. Lu, and M. Zhao. 2016. “Experimental assessment on the use of phase change materials (PCMs)-bricks in the exterior wall of a full-scale room.” Energy Conversion and Management 120:81–89. doi:10.1016/j.enconman.2016.04.065.
   Web of Science ®Google Scholar
• Yoon, S. G., Y. K. Yang, T. W. Kim, M. H. Chung, and J. Park. 2018. “Thermal performance test of a phase-change-material cool roof system by a scaled model.” Article ID 2646103. Advances in Civil Engineering Volume 2018:11/2646103.
   Google Scholar
• Yuekuan, Z., Z. Siqian, L. Zhengxuan, W. Tao, D. Zhixiong, Y. Jun, and Z. Guoqiang. 2020. “Passive and active phase change materials integrated building energy systems with advanced machine-learning-based climate-adaptive designs, intelligent operations, uncertainty-based analysis and optimisations: A state-of-the-art review.” Renewable and Sustainable Energy Reviews 130:109889. doi:10.1016/j.rser.2020.109889.
   Web of Science ®Google Scholar
• Zhou, Y., Z. S Iqian, Z. Guoqiang. 2020. “A review on cooling performance enhancement for phase change materials integrated systems—flexible design and smart control with machine learning applications.“ Buliding and Environment 174(2020):106786.
   Web of Science ®Google Scholar
• Zhou, Y., S. Zheng, and G. Zhang. 2019b. “Machine learning-based optimal design of a phase change material integrated renewable system with on-site PV, radiative cooling and hybrid ventilation—the study of modelling and application in five climatic regions.” Energy 192:116608. doi:10.1016/j.energy.2019.116608.
   Web of Science ®Google Scholar
• Zhou, Y., S. Zheng, and G. Zhang. “A state-of-the-art-review on phase change materials integrated cooling systems for deterministic parametrical analysis, stochastic uncertainty-based design.” single and multi-objective optimisations with machine learning applications Energy & Buildings. Accessed 19 April 2020. doi:10.1016/j.enbuild.2020.110013.
   Google Scholar