Jet impingement in a V-rib roughened solar air heater: an experimental approach

References

• Aboghrara, A. M., B. T. H. T. Baharudin, M. A. Alghoul, N. M. Adam, A. A. Hairuddin, and H. A. Hasan. 2017. Performance analysis of solar air heater with jet impingement on corrugated absorber plate. Case Studies in Thermal Engineering 10:111–20. doi:10.1016/j.csite.2017.04.002.
   Web of Science ®Google Scholar
• Belusko, M., W. Saman, and F. Bruno. 2008. Performance of jet impingement in unglazed air collectors. Solar Energy 82:389–98. doi:10.1016/J.SOLENER.2007.10.005.
   Web of Science ®Google Scholar
• Chamoli, S., and N. S. Thakur. 2015. Effect of roughness height ratio in V down perforated baffle roughness on thermohydraulic performance of solar air heater: An experimental study. International Journal of Ambient Energy 36:242–47. doi:10.1080/01430750.2013.853206.
   Web of Science ®Google Scholar
• Chauhan, R., and N. S. Thakur. 2013. Heat transfer and friction factor correlations for impinging jet solar air heater. Experimental Thermal and Fluid Science 44:760–67. doi:10.1016/j.expthermflusci.2012.09.019.
   Web of Science ®Google Scholar
• Chauhan, R., and N. S. Thakur. 2014. Investigation of the thermohydraulic performance of impinging jet solar air heater. Energy 68:255–61. doi:10.1016/J.ENERGY.2014.02.059.
   Web of Science ®Google Scholar
• Chi, Z., R. Kan, J. Ren, and H. Jiang. 2013. Experimental and numerical study of the anti-crossflows impingement cooling structure. International Journal of Heat and Mass Transfer 64:567–80. doi:10.1016/j.ijheatmasstransfer.2013.04.052.
   Web of Science ®Google Scholar
• Choudhury, C., and H. P. Garg. 1991. Evaluation of a jet plate solar air heater. Solar Energy 46:199–209. doi:10.1016/0038-092X(91)90064-4.
   Web of Science ®Google Scholar
• Deo, N. S., S. Chander, and J. S. Saini. 2016. Performance analysis of solar air heater duct roughened with multigap V-down ribs combined with staggered ribs. Renewable Energy 91:484–500. doi:10.1016/j.renene.2016.01.067.
   Web of Science ®Google Scholar
• Ebrahim Momin, A. M., J. S. Saini, and S. C. Solanki. 2002. Heat transfer and friction in solar air heater duct with V-shaped rib roughness on absorber plate. International Journal of Heat and Mass Transfer 45:3383–96. doi:10.1016/S0017-9310(02)00046-7.
   Web of Science ®Google Scholar
• Fan, W., G. Kokogiannakis, and Z. Ma. 2018. A multi-objective design optimisation strategy for hybrid photovoltaic thermal collector (PVT)-solar air heater (SAH) systems with fins. Solar Energy 163:315–28. doi:10.1016/j.solener.2018.02.014.
   Web of Science ®Google Scholar
• Goel, A. K., and S. N. Singh. 2021. Experimental performance evaluation of an impinging jet with fins type solar air heater. Environmental Science and Pollution Research 28:19944–57. doi:10.1007/s11356-020-12193-x.
   PubMed Web of Science ®Google Scholar
• Jain, S. K., G. D. Agrawal, and R. Misra. 2019. Heat transfer augmentation using multiple gaps in arc-shaped ribs roughened solar air heater: An experimental study. Energy Sources, Part A Recover. Utillization Environment and Efficiency 1–12. doi:10.1080/15567036.2019.1607945.
   Google Scholar
• Kannan, C., M. Mohanraj, and P. Sathyabalan. 2021. Experimental investigations on jet impingement solar air collectors using pin-fin absorber. Proceedings of the Institution of Mechanical Engineers 235:134–46. doi:10.1177/0954408920935301.
   Google Scholar
• Kercher, D. M., and W. Tabakoff. 1970. Heat transfer by a square array of round air jets impinging perpendicular to a flat surface including the effect of spent air. Journal of Engineering for Gas Turbines and Power 92:73–82. doi:10.1115/1.3445306.
   Google Scholar
• Kline, S., and F. Mcclintock. 1953. Describing uncertainties in single-sample experiments. Mechanical Engineering 75:3–8.
   Google Scholar
• Kumar, A., S. Silswal, and P. Dhiman. 2021. Photovoltaic thermal solar air heater under external recycle: A performance study. Energy Sources, Part A Recover Utillization Environment and Efficiency 1–17. doi:10.1080/15567036.2021.1919793.
   Google Scholar
• Kumar, R., G. Bharadwaj, M. Kharub, V. Goel, and A. Kumar. 2022. Performance analysis of nanofluid based direct absorption solar collector of different configurations: A two-phase CFD modeling. Energy Sources, Part A Recover Utillization Environment and Efficiency 1–16. doi:10.1080/15567036.2022.2030439.
   Google Scholar
• Lewis, M. J. 1975. Optimising the thermohydraulic performance of rough surfaces. International Journal of Heat and Mass Transfer 18:1243–48. doi:10.1016/0017-9310(75)90232-X.
   Web of Science ®Google Scholar
• Maithani, R., A. Kumar, G. Raghav, M. Nagpal, and B. Kumar. 2021. Thermal analysis of jet impingement on hemispherical protrusion on heated surface. Experimental Heat Transfer 34:662–77. doi:10.1080/08916152.2020.1808117.
   Web of Science ®Google Scholar
• Matheswaran, M. M., T. V. Arjunan, and D. Somasundaram. 2018. Analytical investigation of solar air heater with jet impingement using energy and exergy analysis. Solar Energy 161:25–37. doi:10.1016/J.SOLENER.2017.12.036.
   Web of Science ®Google Scholar
• Nadda R, Kumar A and Maithani R. (2017). Developing heat transfer and friction loss in an impingement jets solar air heater with multiple arc protrusion obstacles. Solar Energy, 158 117–131. 10.1016/j.solener.2017.09.042
   Web of Science ®Google Scholar
• Ozgen, F., M. Esen, and H. Esen. 2009. Experimental investigation of thermal performance of a double-flow solar air heater having aluminium cans. Renewable Energy 34:2391–98. doi:10.1016/J.RENENE.2009.03.029.
   Web of Science ®Google Scholar
• Prasad, K., and S. C. Mullick. 1983. Heat transfer characteristics of a solar air heater used for drying purposes. Applied Energy 13:83–93. doi:10.1016/0306-2619(83)90001-6.
   Web of Science ®Google Scholar
• Shukla, A. K., and A. Dewan. 2017. Flow and thermal characteristics of jet impingement: comprehensive review. International Journal of Heat and Technology 35:153–66. doi:10.18280/ijht.350121.
   Google Scholar
• Tepe, A. Ü., Ü. Uysal, Y. Yetişken, and K. Arslan. 2020. Jet impingement cooling on a rib-roughened surface using extended jet holes. Applied Thermal Engineering 178:115601. doi:10.1016/j.applthermaleng.2020.115601.
   Web of Science ®Google Scholar
• Thakur, S., and N. S. Thakur. 2020. Impact of multi-staggered rib parameters of the ‘W’ shaped roughness on the performance of a solar air heater channel. Energy Sources, Part A Recover Utillization Environment and Efficiency 1–20. doi:10.1080/15567036.2020.1764672.
   Google Scholar
• Yadav, S., and R. P. Saini. 2020. Numerical investigation on the performance of a solar air heater using jet impingement with absorber plate. Solar Energy 208:236–48. doi:10.1016/j.solener.2020.07.088.
   Web of Science ®Google Scholar
• Yu, P., K. Zhu, Q. Shi, N. Yuan, and J. Ding. 2017. Transient heat transfer characteristics of small jet impingement on high-temperature flat plate. International Journal of Heat and Mass Transfer 114:981–91. doi:10.1016/j.ijheatmasstransfer.2017.06.112.
   Web of Science ®Google Scholar