References
- Cailile. 2019. Study on dispersion and volatile diffusion characteristics of highly viscous fluid in high-speed disperser [D]. Beijing, China: Beijing University of chemical technology. doi:10.26939/d.cnki.gbhgu.2019.001796.
- Cao, G., Q. Cheng, Y. Liu, R. Bu, N. Zhang, P. Wang. 2022. Influencing factors of surfactant stripping crude oil and spontaneous imbibition mechanism of surfactants in a tight reservoir[J]. ACS OMEGA 7 (22):19010–20. doi:10.1021/acsomega.2c02190.
- Dinganyan, H., Q. min, F. M. Wangsongnian, and W. Huang. 2022. Study on hydrodynamics of enhanced sieve plate packing by pulse flow in gas-liquid co flow direction [J]. Journal of Chemical Engineering of Colleges and Universities 36 (2):176–83.
- Fu, M., and F. Xiong. 2009. Study on formation plugging mechanism of polymer flooding in Henan Oilfield[J]. Drilling and Production Process 32 (4):77–79 + 109 + 120–121.
- He, D., F. Chen, and W. Wang. 2001. Cold model experimental study on dispersion effect of throat disperser [J]. Journal of Ningbo College 04:105–08.
- Huxin, Y. 2021. Research on structural optimization of new pressure divider under low injection rate [d]. Daqing, China: Northeast Petroleum University. doi:10.26995/d.cnki.gdqsc.2021.000163.
- Jia, L. 2021. Analysis on dynamic characteristics of polymer flooding and influencing factors of flooding effect in Daqing Oilfield[J]. IOP Conference Series: Earth and Environmental Science 804 (2):1–4.
- Jing, X., M. Huang, and R. Yao. 2005. Effect of carrier gas on dry etching of silica [J]. Microelectronics 05:456–60.
- Lamas, L. F., V. E. Botechia, D. J. Schiozer, M. L. Rocha, and M. Delshad. 2021. Application of polymer flooding in the revitalization of a mature heavy oil field[J]. Journal of Petroleum Science and Engineering 204: 108695. https://doi.org/10.1007/s13369-021-06065-w
- Liu, S. 2017. Research progress of polymer flooding technology [J]. Chemical Management 244(10):62-68.
- Min, L., C. Xinping, N. Guifeng. 2010. Numerical simulation analysis and structure optimization of jet water mixer [J]. China Petroleum Machinery 38 (8):34–36.
- Nie, C., X. Wu, Z. Hou, J. Li, and H. Jiang. 2022. Evaluation of the factors influencing residual oil evolution after alkali/surfactant/polymer flooding in daqing oilfield[J]. Energies 15 (3):1048. doi:10.3390/en15031048.
- Ren, L., D. Zhang, Z. Chen, X. Meng, G. Wenge, and M. Chen. 2021. Study on basic properties of alkali‒surfactant‒polymer flooding water and influence of oil-displacing agent on oil–water settlement[J]. Arabian Journal for Science and Engineering 47:6941–6949. https://doi.org/10.1007/s13369-021-06065-w
- Shi, D. 2015. Numerical simulation of hydrodynamic characteristics in high speed disperser [D]. Beijing, China:Beijing University of chemical technology.
- Sun, X., M. Zhao, X. Fan, Y. Zhang, C. Xu, L. Wang, and G. Sang. 2022. Study on Micro Production Mechanism of Corner Residual Oil after Polymer Flooding. Polymers 14 (5). doi:10.3390/polym14050878.
- Tangli, W. 2014. Research on polymer dispersion and dissolution device with high concentration and large preparation amount [D]. Daqing, China: Northeast Petroleum University.
- Wang, B. 2019. Application of polymer dispersion technology in oilfield production [j]. Chemical Engineering and Equipment 08:110–11. doi:10.19566/j.cnki.cn35-1285/tq.2019.08.043.
- Wang, Q., and R. Jiang. 2021. Comprehensive effects of polymer flooding on oil-water relative permeabilities[J]. J. Energy Resour. Technol. 50(10):2695-2698.
- Wangfeifei, P. Z., and T. Shu. 2018. Numerical simulation of polymer dispersion and dissolution system[J]. Petroleum Machinery 46 (10):65–71. doi:10.16082/j.cnki.1001-4578.2018.10.013.
- Wangyan, H. 2020. Difficulties faced by oil production engineering and technical development direction [J]. Chemical Engineering and Equipment 03:94–95. doi:10.19566/j.cnki.cn35-1285/tq.2020.03.043.
- Wei, S. 1996. Mobile packing tank with liquid drops carried by purified gas flow [J]. Foreign Oilfield Engineering 02:30–31.
- Wei, N., Y. Meng, G. Li, L. Wan, Z. Xu, X. Xu, and Y. Zhang. 2010. Calculation of minimum gas injection volume of liquid carried by gas drilling[J]. Natural Gas Technology 4 (5):35–37 + 78–79.
- Xueying, C. 2021. Optimization design of polymer flooding scheme for class II reservoir in sazhong development zone[J]. IOP Conference Series: Earth and Environmental Science 781 (2):1–5.
- Zhanghuali, G., and Y. Zhou. 2014. Development and application of circulating automatic liquid distribution tank [J]. Neijiang Technology 35 (6):38 + 40.
- Zhong, C., X. Meng, and J. Huang. 2022. Effect of high reservoir pressure on rheological properties of branched xanthan gum and polymer flooding behavior in porous media[J]. Petroleum Science and Technology 40 (3):270–89. doi:10.1080/10916466.2021.1993254.
- Zhu, M. 2009. Establishment of the minimum gas velocity model for gas flow carrying droplets [J]. Examination Weekly 36:167–68.