Numerical simulation on the erosion characteristics of dense particles in the annular channel of downhole fracture pipe

References

• Agrawal, M., S. Khanna, A. Kopliku, and T. Lockett. 2019. Prediction of sand erosion in CFD with dynamically deforming pipe geometry and implementing proper treatment of turbulence dispersion in particle tracking. Wear 426-427:596–604. doi:10.1016/j.wear.2019.01.018.
   Web of Science ®Google Scholar
• Cheng, J., Y. Dou, J. Zhang, N. Zhang, Z. Li, and Z. Wang. 2018. Experimental Study on Particle Erosion Failure of Abrupt Pipe Contraction in Hydraulic Fracturing. Journal of Failure Analysis and Prevention 18 (2):382–91. doi:10.1007/s11668-018-0409-5.
   Web of Science ®Google Scholar
• Chen, X., B. S. McLaury, and S. A. Shirazi. 2006. A comprehensive procedure to estimate erosion in elbows for gas/liquid/sand multiphase flow. Journal of Energy Resources Technology 128 (1):70. doi:10.1115/1.2131885.
   Web of Science ®Google Scholar
• Chen, C. X., and W. J. W. 2014. A comparison of two-fluid model, dense discrete particle model and CFD-DEM method for modeling impinging gas–solid flows. Powder Technology 254:94–102. doi:10.1016/j.powtec.2013.12.056.
   Web of Science ®Google Scholar
• Chen, J., Y. Wang, X. Li, R. He, S. Han, and Y. Chen. 2015. Reprint of “Erosion prediction of liquid-particle two-phase flow in pipeline elbows via CFD–DEM coupling method”. Powder Technology 282 (22):25–31. doi:10.1016/j.powtec.2015.05.037.
   Google Scholar
• El-Amin, M. F., S. Sun, W. Heidemann, and H. Muller-Steinhagen. 2010. Analysis of a turbulent buoyant confined jet modeled using realizable k–ɛ model. Bubbly Flows: Analysis, Modelling & Calculation 46 (8–9):943–60. doi:10.1007/s00231-010-0625-3.
   Google Scholar
• Elemuren, R., R. Evitts, I. Oguocha, G. Kennell, R. Gerspacher, and A. Odeshi. 2018. Slurry erosion-corrosion of 90° AISI 1018 steel elbow in saturated potash brine containing abrasive silica particles. Wear 410-411:149–55. doi:10.1016/j.wear.2018.06.010.
   Web of Science ®Google Scholar
• Farokhipour, A., Z. Mansoori, A. Rasteh, M. A. Rasoulian, M. Saffar-Avval, and G. Ahmadi. 2019. Study of Erosion Prediction of Turbulent Gas-Solid Flow in Plugged Tees via CFD-DEM. Powder Technology 352:136–50. doi:10.1016/j.powtec.2019.04.058.
   Web of Science ®Google Scholar
• Finnie, I. 1958. The mechanism of erosion of ductile metals: Proceeding of the 3rd US National Congress of Applied Mechanics[C], 76. New York: Wear.
   Google Scholar
• Forder, A., M. Thew, and D. Harrison. 1998. A numerical investigation of solid particle erosion experienced within oilfield control valves. Wear 216 (2):184–93. doi:10.1016/S0043-1648(97)00217-2.
   Web of Science ®Google Scholar
• Haider, G., H. Arabnejad, S. A. ShirazI, and B. S. Mclaury. 2017. A mechanistic model for stochastic rebound of solid particles with application to erosion predictions. Wear 376-377 (377):615–24. doi:10.1016/j.wear.2017.02.015.
   Google Scholar
• Hong, B., X. Li, Y. Li, Y. Li, Y. Yu, Y. Wang, J. Gong, and D. Ai. 2021. Numerical Simulation of Elbow Erosion in Shale Gas Fields under Gas-Solid Two-Phase Flow. Energies 14 (13):3804. doi:10.3390/en14133804.
   Web of Science ®Google Scholar
• Kosinska, A., B. V. Balakin, and P. Kosinski. 2020. Theoretical Analysis of Erosion in Elbows due to Flows with Nano- and Micro-Size Particles. Powder Technology 364:484–93. doi:10.1016/j.powtec.2020.02.002.
   Web of Science ®Google Scholar
• Li, B., M. Zeng, and Q. Qiu Wang. 2022. Numerical Simulation of Erosion Wear for Continuous Elbows in Different Directions. Energies 15 (5):1901. doi:10.3390/en15051901.
   Web of Science ®Google Scholar
• Lu, Y., and M. Agrawal. 2014. Computational-fluid-dynamics-based Eulerian-granular approach for characterization of sand erosion in multiphase-flow systems. SPE Journal 19 (04):586–97. doi:10.2118/159921-PA.
   Google Scholar
• Mamoo, M. S., A. S. Goharrizi, and B. Abolpour. 2020. CFD Simulation of Erosion by Particle Collision in U-Bend and Helical Type Pipes. Journal of the Serbian Society for Computational Mechanics 14 (2):1–13. doi:10.24874/jsscm.2020.14.02.01.
   Web of Science ®Google Scholar
• Mazumder, Q. 2012. Effect of Liquid and Gas Velocities on Magnitude and Location of Maximum Erosion in U-Bend. Open Journal of Fluid Dynamics 2 (2):29–34. doi:10.4236/ojfd.2012.22003.
   Google Scholar
• Nguyen, V. B., Q. B. Nguyen, Z. G. Liu, S. Wan, C. Y. H. Lim, and Y. W. Zhang. 2014. A combined numerical–experimental study on the effect of surface evolution on the water–sand multiphase flow characteristics and the material erosion behavior. Wear 319 (1–2):96–109. doi:10.1016/j.wear.2014.07.017.
   Web of Science ®Google Scholar
• Njobuenwu, D. O., and M. Fairweather. 2012. Modelling of pipe bend erosion by dilute particle suspensions. Computers and Chemical Engineering 42:235–47. doi:10.1016/j.compchemeng.2012.02.006.
   Web of Science ®Google Scholar
• Pei, J. L., A. Lui, Q. Zhang, T. Xiong, P. Jiang, and W. Wei. 2018. Numerical investigation of the maximum erosion zone in elbows for liquid-particle flow. Powder Technology 333:47–59. doi:10.1016/j.powtec.2018.04.001.
   Web of Science ®Google Scholar
• Pouraria, H., F. Darihaki, K. H. Park, S. A. Shirazi, and Y. Seo. 2020. CFD modelling of the influence of particle loading on erosion using dense discrete particle model. Wear 460-461:203450–61. doi:10.1016/j.wear.2020.203450.
   Web of Science ®Google Scholar
• Sedrez, T. A., S. A. Shirazi, Y. R. R, K. Sambath, and H. J. Subramani. 2019. Experiments and CFD simulations of erosion of a 90° elbow in liquid-dominated liquid-solid and dispersed-bubble-solid flows. Wear 426-427:570–80. doi:10.1016/j.wear.2019.01.015.
   Web of Science ®Google Scholar
• Singh, J., S. Kumar, J. P. Singh, P. Kumar, and S. K. Mohapatra. 2018. CFD modeling of erosion wear in pipe bend for the flow of bottom ash suspension. Particulate Science and Technology 37 (3):275–85. doi:10.1080/02726351.2017.1364816.
   Web of Science ®Google Scholar
• Solnordal, C. B., C. Y. Wong, and J. Boulanger. 2015. An experimental and numerical analysis of erosion caused by sand pneumatically conveyed through a standard pipe elbow. Wear 336-337:43–57. doi:10.1016/j.wear.2015.04.017.
   Web of Science ®Google Scholar
• Suzuki, M., I. K. Inaba, and M. Yamamoto. 2008. Numerical Simulation of Sand Erosion in a Square-Section 90-Degree Bend. Journal of Fluid Science and Technology 3 (7):868–80. doi:10.1299/jfst.3.868.
   Google Scholar
• Uzi, A., Y. B. Ami, and A. Levy. 2017. Erosion prediction of industrial conveying pipelines. Powder Technology 309:49–60. doi:10.1016/j.powtec.2016.12.087.
   Web of Science ®Google Scholar
• Xu, J., Z. Lian, J. Hu, and M. Luo. 2018. Prediction of the Maximum Erosion Rate of Gas–Solid Two-Phase Flow Pipelines. Energies 11 (10):2773. doi:10.3390/en11102773.
   Web of Science ®Google Scholar
• Zamani, M., S. Seddighi, and H. R. Nazif. 2017. Erosion of natural gas elbows due to rotating particles in turbulent gas-solid flow. Journal of Natural Gas Science & Engineering 40:91–113. doi:10.1016/j.jngse.2017.01.034.
   Web of Science ®Google Scholar
• Zeng, L., G. A. A, and X. P. Guo. 2014. Erosion–corrosion at different locations of X65 carbon steel elbow. Corrosion Science 85 (4):318–30. doi:10.1016/j.corsci.2014.04.045.
   Google Scholar
• Zhang, Y., B. S. McLaury, and S. A. Shirazi. 2009. Improvements of Particle Near-Wall Velocity and Erosion Predictions Using a Commercial CFD code. Journal of Fluids Engineering 131 (3):303–12. doi:10.1115/1.3077139.
   Web of Science ®Google Scholar
• Zhu, H., and Y. Qi. 2019. Numerical investigation of flow erosion of sand-laden oil flow in a U-bend. Process Safety and Environmental Protection 131:16–27. doi:10.1016/j.psep.2019.08.033.
   Web of Science ®Google Scholar