52
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Assessing the impact of sargassum algae biodiesel blends on energy conversion in a modified single-cylinder diesel engine with a silica-incorporated diamond-like coated piston

ORCID Icon, , ORCID Icon & ORCID Icon
Pages 6882-6897 | Received 16 Jan 2024, Accepted 08 Apr 2024, Published online: 24 May 2024

References

  • Abed, K. A., M. S. Gad, A. K. El Morsi, M. M. Sayed, and S. Abu Elyazeed. 2019. Effect of biodiesel fuels on diesel engine emissions. Egyptian Journal of Petroleum 28 (2):183–88. doi:10.1016/j.ejpe.2019.03.001.
  • Anand, R. 2017. Simultaneous control of oxides of nitrogen and soot in CRDI diesel engine using split injection and cool egr Fueled with Waste Frying Oil Biodiesel and Its Blends. Air Pollution and Control 11–44. doi:10.1007/978-981-10-7185-0_2.
  • Boomadevi, P., V. Paulson, S. Samlal, M. Varatharajan, M. Sekar, M. Alsehli, A. Elfasakhany, and S. Tola. 2021. Impact of microalgae biofuel on microgas turbine aviation engine: A combustion and emission study. Fuel 302:121155. doi:10.1016/j.fuel.2021.121155.
  • Das, P. K., and B. P. Das. 2020. Patitapaban Dash, 13 - Potentials of postharvest rice crop residues as a source of biofuel. In Refining biomass residues for sustainable energy and bioproducts, ed. R. P. Kumar, E. Gnansounou, J. K. Raman, and G. Baskar, 275–301. Academic Press. doi:10.1016/B978-0-12-818996-2.00013-2.
  • Devarajan, Y., B. Nagappan, G. Choubey, S. Vellaiyan, and K. Mehar. 2021. Renewable pathway and twin fueling approach on ignition analysis of a dual-fuelled compression ignition engine. Energy & Fuels 35 (12):9930–36. doi:10.1021/acs.energyfuels.0c04237.
  • Dey, S., and N. S. Mehta. 2020. Automobile pollution control using catalysis, Resources. Resources, Environment and Sustainability 2:100006. doi:10.1016/j.resenv.2020.100006.
  • Elkelawy, M., H. A.-E. Bastawissi, E. A. El Shenawy, M. Taha, H. Panchal, and K. K. Sadasivuni. 2021. Study of performance, combustion, and emissions parameters of DI-diesel engine fueled with algae biodiesel/diesel/n-pentane blends. Energy Conversion and Management 10:100058. doi:10.1016/j.ecmx.2020.100058.
  • Elumalai, P. V., K. Annamalai, and B. Dhinesh. 2019. Effects of thermal barrier coating on the performance, combustion and emission of DI diesel engine powered by biofuel oil–water emulsion. Journal of Thermal Analysis and Calorimetry 137 (2):593–605. doi:10.1007/s10973-018-7948-6.
  • Gakis, G. P., E. N. Skountzos, I. G. Aviziotis, and C. A. Charitidis. 2023. Multi-parametric analysis of the CVD of CNTs: Effect of reaction temperature, pressure and acetylene flow rate. Chemical Engineering Science 267:118374. doi:10.1016/j.ces.2022.118374.
  • Ghedini, E., S. Taghavi, F. Menegazzo, and M. Signoretto. 2021. A review on the efficient catalysts for algae transesterification to biodiesel. Sustainability 13 (18):10479. doi:10.3390/su131810479.
  • Kale, B. N., S. D. Patle, and S. R. Kalambe. 2021. Microalgae biodiesel and its various diesel blends as promising alternative fuel for diesel engine. Materials Today: Proceedings 44:2972–77. doi:10.1016/j.matpr.2021.02.122.
  • Kulanthaivel, V., A. Jayaraman, T. Rajamanickam, and S. Selvam. 2021. Impact of diesel – Algae biodiesel- Anhydrous ethanol blends on the performance of CI engines. Journal of Cleaner Production 295:126422. doi:10.1016/j.jclepro.2021.126422.
  • Kulkarni, P. S., G. Sharanappa, M. R. Ramesh, N. R. Banapurmath, and S. V. Khandal. 2019. Experimental investigations of a low heat rejection (LHR) engine powered with Mahua oil methyl ester (MOME) with exhaust gas recirculation (EGR). doi: 10.1080/17597269.2017.1345356.
  • Lakshminarayanan, P. A., and Y. V. Aghav. 2022. Heat release in direct injection engines. In Modelling diesel combustion. Mechanical Engineering Series. Singapore: Springer. doi:10.1007/978-981-16-6742-8_9.
  • Li, H., P. Sun, Y. Zhu, M. Wu, and Q. Wang. 2018. Influence of C2H2 Flows on microstructure and corrosion resistance of TiCN films doped with carbon atoms. Coatings 8 (12):458. MDPI AG. doi:10.3390/coatings8120458.
  • Mohammed Nibin, J. B. R., V. Edwin Geo, and V. E. Geo. 2021. Experimental studies to improve the performance, emission and combustion characteristics of wheat germ oil fuelled CI engine using bioethanol injection in PCCI mode. Fuel 285:119196. doi:10.1016/j.fuel.2020.119196.
  • Muharrem Ince. 2019. Olcay Kaplan Ince, Hydrocarbon Pollution and Its Effect on the Environment. United Kingdom: Intech Open.
  • Murugan, V. S., and S. Madhu. 2022. Analysis of mechanical and tribological properties of silicon incorporated diamond like carbon nanocomposite coating. Silicon 14 (11):6053–61. doi:10.1007/s12633-021-01375-y.
  • Pandey, K. K., and S. Murugan. 2022. A review of bio-fuelled LHR engines. International Journal of Ambient Energy 43 (1):2486–509. doi:10.1080/01430750.2020.1712254.
  • Pandey, K. K., J. Paparao, and S. Murugan. 2022. Experimental studies of an LHR mode DI diesel engine run on antioxidant doped biodiesel. Fuel 313:123028. doi:10.1016/j.fuel.2021.123028.
  • Panigrahi, N., M. K. Mohanty, S. R. Mishra, and R. C. Mohanty. 2014. Performance, emission, energy, and exergy analysis of a C.I. Engine using mahua biodiesel blends with diesel. International Scholarly Research Notices 2014:13. Article ID 207465. doi:10.1155/2014/207465.
  • Paparao, J., S. Bhopatrao, S. Murugan, and O. A. Kuti. 2023. Optimization of a low heat rejection engine run on oxy‑hydrogen gas with a biodiesel-diesel blend. Fuel Processing Technology 241:107625. doi:10.1016/j.fuproc.2022.107625
  • Pronobis, M. 2020. Chapter 4 - Reduction of nitrogen oxide emissions. In Environmentally oriented modernization of power boilers, ed. M. Pronobis, 79–133. Elsevier. doi:10.1016/B978-0-12-819921-3.00004-2.
  • Reşitoğlu, İ. A., K. Altinişik, and A. Keskin. 2015. The pollutant emissions from diesel-engine vehicles and exhaust aftertreatment systems. Clean Techn Environ Policy 17 (1):15–27. doi:10.1007/s10098-014-0793-9.
  • Saeed, M., Y. Alshammari, M. Sa, and E. Al-Nasrallah. 2020. Chemical vapour deposition of graphene-synthesis, characterisation, and applications: A review. Oxycedrus Needles and Berries Molecules 25 (17):3856. doi:10.3390/molecules25173856.
  • Saravanan, C. G., V. EdwinGeo, G. Fol, F. Aloui, S. Thiyagarajan, M. J. Stanley, A. Sonthalia, and K. Brindhadevi. 2021. Experimental analysis to reduce CO2 and other emissions of CRDI CI engine using low viscous biofuels. Fuel 283:118829. doi:10.1016/j.fuel.2020.118829.
  • Sarwer, A., S. M. Hamed, A. I. Osman, F. Jamil, A. H. Al-Muhtaseb, N. S. Alhajeri, and D. W. Rooney. 2022. Algal biomass valorization for biofuel production and carbon sequestration: A review. Environmental Chemistry Letters 20 (5):2797–851. doi:10.1007/s10311-022-01458-1.
  • Subramaniam, M., J. M. Solomon, V. Nadanakumar, S. Anaimuthu, and R. Sathyamurthy. 2020. Experimental investigation on performance, combustion and emission characteristics of DI diesel engine using algae as a biodiesel. Energy Reports 6:1382–92. doi:10.1016/j.egyr.2020.05.022.
  • Sun, J., C. Liu, and B. Bhushan. 2019. A review of beetle hindwings: Structure, mechanical properties, mechanism and bioinspiration. Journal of the Mechanical Behavior of Biomedical Materials 94:63–73. doi:10.1016/j.jmbbm.2019.02.031.
  • Tavakoli, S., M. V. Jensen, E. Pedersen, and J. Schramm. 2021. Unburned hydrocarbon formation in a natural gas engine undersea wave load conditions. Journal of Marine Science and Technology 26 (1):128–40. doi:10.1007/s00773-020-00726-5.
  • Thiyagarajan, S., V. Edwin Geo, L. J. Martin, and B. Nagalingam. 2018. Effect of electrochemical conversion of biofuels using ionization system on CO2 emission mitigation in CI engine along with post-combustion system. Fuel Processing Technology 173:21–29. doi:10.1016/j.fuproc.2018.01.004.
  • Venugopal, P., R. Kasimani, and S. Chinnasamy. 2018. Prediction and optimization of CI engine performance fuelled with Calophyllum inophyllum diesel blend using response surface methodology (RSM). Environmental Science and Pollution Research 25 (25):24829–44. doi:10.1007/s11356-018-2519-8.
  • Vinoth, I. S., S. Detwal, V. Umasankar, and A. Sarma. 2019. Tribological studies of automotive piston ring by diamond-like carbon coating. Tribology – Materials, Surfaces & Interfaces 13 (1):31–38. doi:10.1080/17515831.2019.1569852.
  • Zhang, P., J. Ni, X. Shi, S. Yin, and D. Zhang. 2021. Effects of ignition timing on combustion characteristics of a gasoline direct injection engine with added compressed natural gas under partial load conditions. Processes 9 (5):755. doi:10.3390/pr9050755.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.