43
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Design and analysis of soft-switching isolated step-up/down DC–DC converter for fuel cell vehicles and EV battery charging applications

ORCID Icon & ORCID Icon
Pages 17-38 | Received 31 Oct 2023, Accepted 06 Jun 2024, Published online: 26 Jun 2024

References

  • Alhurayyis, I., A. Elkhateb, and J. Morrow. 2020. Isolated and non-isolated DC-to-DC converters for medium-voltage DC networks: A review. IEEE Journal of Emerging and Selected Topics in Power Electronics 9 (6):7486–500.
  • Banaei, M. R., and H. A. F. Bonab. 2017. A novel structure for single-switch non-isolated transformerless buck –boost DC –DC converter. Transactions on Industrial Electronics 64 (1):198–205. doi:10.1109/TIE.2016.2608321.
  • Bharathidasan, M., and V. Indragandhi. 2020. Review of power factor correction (pfc) ac/dc-dc power electronic converters for electric vehicle applications. IOP Conference Series: Materials Science & Engineering 906 (1):012006. 10.1088/1757-899X/906/1/012006.
  • Chakraborty, S., H.-N. Vu, M. M. Hasan, D.-D. Tran, M. E. Baghdadi, and O. Hegazy. 2019. DC-DC converter topologies for electric vehicles, plug-in hybrid electric vehicles and fast charging stations: state of the art and future trends. Energies 12 (8):1569. doi:10.3390/en12081569.
  • Corti, F., A. Laudani, G. Maria Lozito, M. Palermo, M. Quercio, F. Pattini, and S. Rampino. 2023. Dynamic analysis of a supercapacitor DC-Link in photovoltaic conversion applications. Energies 16 (16):5864. doi:10.3390/en16165864.
  • Ersöz, B., and H. İ. Bülbül. 2022. A research on importance of using renewable energy sources by organizations within the scope of green deal preparations. 2022 11th International Conference on Renewable Energy Research and Application (ICRERA), 213–18, Istanbul, Turkey. doi:10.1109/ICRERA55966.2022.9922809.
  • García-Vite, P. M., C. A. Soriano-Rangel, J. C. Rosas-Caro, and F. Mancilla-David. 2017. A DC-DC converter with quadratic gain and input current ripple cancelation at a selectable duty cycle. Renewable Energy 101:431–36. doi:10.1016/j.renene.2016.09.010.
  • Gorji, S. A., M. Ektesabi, and J. Zheng. 2017. Isolated switched-boost push– pull DC–DC converter for step-up applications. IET Electronics Letters 53 (3):177–79. doi:10.1049/el.2016.4151.
  • Gu, B., C. Lin, B. Chen, J. Dominic, and J. Lai. 2013. Zero-voltage-switching PWM resonant full-bridge converter with minimized circulating losses and minimal voltage stresses of bridge rectifiers for electric vehicle battery chargers. IEEE Transactions on Power Electronics 28 (10):4657–67. doi:10.1109/TPEL.2012.2233762.
  • Gules, R., W. M. dos Santos, F. A. dos Reis, E. F. R. Romaneli, and A. A. Badin. 2014. A modified SEPIC converter with high static gain for renewable applications. IEEE Transactions on Power Electronics 29 (11):5860–71. doi:10.1109/TPEL.2013.2296053.
  • Haegel, N. M., and S. R. Kurtz. 2021. Global progress toward renewable electricity: Tracking the role of solar. IEEE Journal of Photovoltaics 11 (6):1335–42. doi:10.1109/JPHOTOV.2021.3104149.
  • Kanamarlapudi, V. R. K., B. Wang, N. K. Kandasamy, and P. L. So. 2018. A new ZVS full-bridge DC-DC converter for battery charging with reduced losses over full-load range. IEEE Transactions on Industry Applications 54 (1):571–77. doi:10.1109/TIA.2017.2756031.
  • Lameirinhas, M., A. Ricardo, and J. P. N. Torres. 2022. A photovoltaic technology review: History, fundamentals and applications. Energies 15 (5):1823. doi:10.3390/en15051823.
  • Lee, I. 2016. Hybrid PWM-resonant converter for electric vehicle on-board battery chargers. IEEE Transactions on Power Electronics 31 (5):3639–49. doi:10.1109/TPEL.2015.2456635.
  • Lee, I., and G. Moon. 2014. Half-Bridge integrated ZVS full-bridge converter with reduced conduction loss for electric vehicle battery chargers. Transactions on Industrial Electronics 61 (8):3978–88. doi:10.1109/TIE.2013.2282608.
  • Li, J., and J. Liu. 2019. A novel buck–boost converter with low electric stress on components. IEEE Transactions on Industrial Electronics 66 (4):2703–13. doi:10.1109/TIE.2018.2847646.
  • Liao, H., T. Liang, L. Yang, and J. Chen. 2012. Non-inverting buck–boost converter with interleaved technique for fuel-cell system. IET Power Electronics 5 (8):1379. doi:10.1049/iet-pel.2011.0102.
  • Miao, S., F. Wang, and X. Ma. 2016. A new transformerless buck–boost converter with positive output voltage. Transactions on Industrial Electronics 63 (5):2965–75. doi:10.1109/TIE.2016.2518118.
  • Mohammed, S. A. Q., and J. W. Jung. 2021. A Comprehensive State-of-the-art review of wired/wireless charging technologies for battery electric vehicles: Classification/common topologies/future research issues. IEEE Access, vol. 9, 19572–85. doi:10.1109/ACCESS.2021.3055027.
  • Naidu, M. S. H., R. L. Josephine, and R. B. Prakash. 2023. A novel single switched high gain isolated dc-dc converter for electrical vehicles and charging applications. 2023 11th National Power Electronics Conference (NPEC), 1–5, Guwahati, India. doi:10.1109/NPEC57805.2023.10384991.
  • Ogunrinde, O., E. Shittu, and K. K. Dhanda. 2018. Investing in renewable energy: Reconciling regional policy with renewable energy growth. IEEE Engineering Management Review 46 (4):103–11. Fourthquarter. 10.1109/EMR.2018.2880445.
  • Rafi, M. A. H., and J. Bauman. 2021. A comprehensive review of DC fast-charging stations with energy storage: Architectures, power converters, and analysis. IEEE Transactions on Transportation Electrification 7 (2):345–68. doi:10.1109/TTE.2020.3015743.
  • Samuel, V., G. Keerthi, and P. Mahalingam. 2020. Coupled inductor-based DC–DC converter with high voltage conversion ratio and smooth input current. IET Power Electronics 13 (4). doi:10.1049/iet-pel.2019.0933.
  • Selvam, S., M. Sannasy, and M. Sridharan. 2023. Analysis of improved gain switched inductor super lift cell-based modified SEPIC converter for DC microgrid. Electrical Engineering 105:2199–215. doi:10.1007/s00202-023-01775-w.
  • Son, H. S., J.-K. Kim, J.-B. Lee, S.-S. Moon, J.-H. Park, and S.-H. Lee. 2017. A new buck – boost converter with low-voltage stress and reduced conducting components. Transactions on Industrial Electronics 64 (9):7030–38. doi:10.1109/TIE.2017.2686300.
  • Suryoatmojo, H., I. Dilianto, R. Mardiyanto, E. Setijadi, and D. C. 2018. Riawan, and analysis of high gain modified SEPIC converter for photovoltaic applications. 2018 IEEE International Conference on Innovative Research and Development (ICIRD), 1–6, Bangkok, Thailand. doi:10.1109/ICIRD.2018.8376319.
  • Tan, K. M., T. Sudhakar Babu, V. K. Ramachandaramurthy, P. Kasinathan, S. G. Solanki, and S. K. Raveendran. 2021. Empowering smart grid: A comprehensive review of energy storage technology and application with renewable energy integration. Journal of Energy Storage 39:102591.
  • Trinko, D., N. Horesh, E. Porter, J. Dunckley, E. Miller, and T. Bradley. 2023. Transportation and electricity systems integration via electric vehicle charging-as-a-service: A review of techno-economic and societal benefits. Renewable and Sustainable Energy Reviews 175:113180.
  • Turksoy, A., A. Teke, and A. Alkaya. 2020. A comprehensive overview of the dc-dc converter-based battery charge balancing methods in electric vehicles. Renewable and Sustainable Energy Reviews 133:110274.
  • Wang, J., X. Wu, Z. Liu, X. Cui, and Z. Song. 2022. Modified SEPIC DC-DC converter with wide step-up/Step-down range for fuel cell vehicles. IEEE Transactions on Power Electronics. doi:10.1109/TPEL.2022.3203151.
  • Whitaker, B., A. Barkley, Z. Cole, B. Passmore, D. Martin, T. R. McNutt, A. B. Lostetter, J. S. Lee, and K. Shiozaki. 2014. A high-density, high-efficiency, isolated on-board vehicle battery charger utilizing silicon carbide power devices. IEEE Transactions on Power Electronics 29 (5):2606–17. doi:10.1109/TPEL.2013.2279950.
  • Xu, L., U. Reimer, J. Li, H. Huang, Z. Hu, H. Jiang, H. Janßen, M. Ouyang, and W. Lehnert. 2018. Design of durability test protocol for vehicular fuel cell systems operated in power-follow mode based on statistical results of on-road data. Journal of Power Sources 377:59–69. doi:10.1016/j.jpowsour.2017.11.075.
  • Zhang, N., G. Zhang, K. W. See, and B. Zhang. 2018. A single-switch quadratic buck–boost converter with continuous input port current and continuous output port current. IEEE Transactions on Power Electronics 33 (5):4157–66. doi:10.1109/TPEL.2017.2717462.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.