Energy and cost analysis of composite-insulated rooftops for sustainable buildings in Indian climatic conditions

References

• Aktemur, C., F. Bilgin, and S. Tunçkol. 2021. Optimisation on the thermal insulation layer thickness in buildings with environmental analysis: An updated comprehensive study for Turkey’s all provinces. Journal of Thermal Engineering 7 (5):1239–27. doi:10.18186/thermal.978057.
   Web of Science ®Google Scholar
• Al-Sallal, K. A. 2003. Comparison between polystyrene and fiberglass roof insulation in warm and cold climates. Renewable Energy 28 (4):603–11. doi:10.1016/S0960-1481(02)00065-4.
   Web of Science ®Google Scholar
• Anand, Y., S. Anand, A. Gupta, and S. K. Tyagi. 2015. Building envelope performance with different insulating materials - an exergy approach. Journal of Thermal Engineering 1 (4):433–39. doi:10.18186/jte.06871.
   Web of Science ®Google Scholar
• Bolattürk, A. 2006. Determination of optimum insulation thickness for building walls with respect to various fuels and climate zones in Turkey. Applied Thermal Engineering 26 (11–12):1301–09. doi:10.1016/j.applthermaleng.2005.10.019.
   Web of Science ®Google Scholar
• Cao, X., X. Dai, and J. Liu. 2016. Building energy-consumption status worldwide and the state-of-the-art technologies for zero-energy buildings during the past decade. Energy and Buildings 128:198–213. doi:10.1016/j.enbuild.2016.06.089.
   Web of Science ®Google Scholar
• CLC. 2020. Zero Avoidable Waste in Construction. February 6. https://www.constructionleadershipcouncil.co.uk/wp-content/uploads/2016/05/ZAW-Report-Final-Draft-25-February-2020.pdf.
   Google Scholar
• Çomakli, K., and B. Yüksel. 2003. Optimum insulation thickness of external walls for energy saving. Applied Thermal Engineering 23 (4):473–79. doi:10.1016/S1359-4311(02)00209-0.
   Web of Science ®Google Scholar
• Coskun, T., C. Turhan, Z. D. Arsan, and G. G. Akkurt. 2017. The importance of internal heat gains for building cooling design. Journal of Thermal Engineering 3 (1):1060–64. doi:10.18186/thermal.290260.
   Google Scholar
• González-Torres, M., L. Pérez-Lombard, J. F. Coronel, I. R. Maestre, and D. Yan. 2022. A review on buildings energy information: Trends, end-uses, fuels and drivers. Energy Reports 8 (December):626–37. 2021 doi:10.1016/j.egyr.2021.11.280.
   Google Scholar
• Huang, H., Y. Zhou, R. Huang, H. Wu, Y. Sun, G. Huang, and T. Xu. 2020. Optimum insulation thicknesses and energy conservation of building thermal insulation materials in Chinese zone of humid subtropical climate. Sustainable Cities and Society 52:0–44. doi:10.1016/j.scs.2019.101840.
   Web of Science ®Google Scholar
• Hu, J., and J. Wu. 2015. Analysis on the influence of building envelope to public buildings energy consumption based on DeST simulation. Procedia Engineering 121:1620–27. doi:10.1016/j.proeng.2015.09.192.
   Google Scholar
• Jalal, M. D., A. Tanveer, K. J, and F. A. 1991. Foam concrete. Concrete (London) 25 (1):49–54. http://www.ripublication.com.
   Google Scholar
• Karachaliou, P., M. Santamouris, and H. Pangalou. 2016. Experimental and numerical analysis of the energy performance of a large scale intensive green roof system installed on an office building in Athens. Energy and Buildings 114:256–64. doi:10.1016/j.enbuild.2015.04.055.
   Web of Science ®Google Scholar
• Karpov, D., O. Dyudina, and M. Pavlov (2021). A review on modern heat-insulating materials for improving the energy efficiency of buildings and life-support utilities. E3S Web of Conferences, 288, 01099. 10.1051/e3sconf/202128801099
   Google Scholar
• Koroxenidis, E., and T. Theodosiou. 2021. Comparative environmental and economic evaluation of green roofs under Mediterranean climate conditions – extensive green roofs a potentially preferable solution. Journal of Cleaner Production 311 (February):127563. doi:10.1016/j.jclepro.2021.127563.
   Google Scholar
• Kumar, P., and B. K. Nandi. 2023. Assessment of combustion characteristics of high ash Indian coal, petroleum coke and their blends for cement industry using TGA. Cleaner Chemical Engineering 5 (December):100091. 2022 doi:10.1016/j.clce.2022.100091.
   Google Scholar
• Liu, X., Y. Chen, H. Ge, P. Fazio, and G. Chen. 2015. Determination of optimum insulation thickness of exterior wall with moisture transfer in hot Summer and cold Winter zone of China. Procedia Engineering 121:1008–15. doi:10.1016/j.proeng.2015.09.072.
   Google Scholar
• Lulic, H., A. Civic, M. Pasic, A. Omerspahic, and E. Dzaferovic. 2014. Optimization of thermal insulation and regression analysis of fuel consumption. Procedia Engineering 69:902–10. doi:10.1016/j.proeng.2014.03.069.
   Google Scholar
• Mahlia, T. M. I., B. N. Taufiq, Ismail, and H. H. Masjuki. 2007. Correlation between thermal conductivity and the thickness of selected insulation materials for building walli. Energy & Buildings 39 (2):182–87. doi:10.1016/j.enbuild.2006.06.002.
   Web of Science ®Google Scholar
• Mirrahimi, S., M. F. Mohamed, L. C. Haw, N. L. N. Ibrahim, W. F. M. Yusoff, and A. Aflaki. 2016. The effect of building envelope on the thermal comfort and energy saving for high-rise buildings in hot-humid climate. Renewable and Sustainable Energy Reviews 53:1508–19. doi:10.1016/j.rser.2015.09.055.
   Web of Science ®Google Scholar
• Ozel, M. 2013. Determination of optimum insulation thickness based on cooling transmission load for building walls in a hot climate. Energy Conversion and Management 66:106–14. doi:10.1016/j.enconman.2012.10.002.
   Web of Science ®Google Scholar
• Pearlmutter, D., and S. Rosenfeld. 2008. Performance analysis of a simple roof cooling system with irrigated soil and two shading alternatives. Energy and Buildings 40 (5):855–64. doi:10.1016/j.enbuild.2007.06.004.
   Web of Science ®Google Scholar
• Rajak, D. K., P. H. Wagh, and E. Linul. 2021. Manufacturing technologies of carbon/glass fiber-reinforced polymer composites and their properties: A review. Polymers 13 (21):3721. doi:10.3390/polym13213721.
   PubMed Web of Science ®Google Scholar
• Ran, J., M. Tang, L. Jiang, and X. Zheng. 2017. Effect of building roof insulation measures on indoor cooling and energy saving in rural areas in Chongqing. Procedia Engineering 180:669–75. doi:10.1016/j.proeng.2017.04.226.
   Google Scholar
• Santamouris, M., and K. Vasilakopoulou. 2021. Present and future energy consumption of buildings: Challenges and opportunities towards decarbonisation. E-Prime 1 (October):100002. doi:10.1016/j.prime.2021.100002.
   Google Scholar
• Sisman, N., E. Kahya, N. Aras, and H. Aras. 2007. Determination of optimum insulation thicknesses of the external walls and roof (ceiling) for Turkey’s different degree-day regions. Energy Policy 35 (10):5151–55. doi:10.1016/j.enpol.2007.04.037.
   Web of Science ®Google Scholar
• Taki, A., and B. Alsheglawi. 2022. Toward energy-efficient houses considering social cultural needs in Bahrain: A new framework approach. Sustainability (Switzerland) 14 (11). doi: 10.3390/su14116842.
   Google Scholar
• Wang, H., Y. Huang, C. Guo, L. Yang, and L. Huang. 2023. A low-carbon optimization design method for building roof insulation using comprehensive economic analysis model and evaluation index. Sustainable Energy Technologies and Assessments 55 (August 2022):102937. doi:10.1016/j.seta.2022.102937.
   Google Scholar
• Wang, H., Y. Huang, and L. Yang. 2022. Integrated economic and environmental assessment-based optimization design method of building roof thermal insulation. Buildings 12 (7):916. doi:10.3390/buildings12070916.
   Web of Science ®Google Scholar
• Yang, H., K. Kikuta, and M. Hayashi. 2022. Research on carbon reduction of residential buildings in severe cold regions based on renovation of envelopes. Energies 15 (5):1873. doi:10.3390/en15051873.
   Web of Science ®Google Scholar
• Yu, J., C. Yang, L. Tian, and D. Liao. 2009. A study on optimum insulation thicknesses of external walls in hot summer and cold winter zone of China. Applied Energy 86 (11):2520–29. doi:10.1016/j.apenergy.2009.03.010.
   Web of Science ®Google Scholar