2,086
Views
52
CrossRef citations to date
0
Altmetric
Original Articles

Materials, Fabrication, and Manufacturing of Micro/Nanostructured Surfaces for Phase-Change Heat Transfer Enhancement

, , &
Pages 288-310 | Received 01 May 2014, Accepted 12 May 2014, Published online: 23 Jul 2014

REFERENCES

  • K. Watkins, Human Development Report 2006, United Nations Development Program Publications, New York, 2006.
  • F. Birol, World Energy Outlook 2010, International Energy Agency OECD Publications, Paris, France, 2010.
  • J.M. Beer, High Efficiency Electric Power Generation: The Environmental Role, Progress in Energy and Combustion Science, Vol. 33, pp. 107–134, 2007.
  • E. Masanet and M.E. Walker, Energy–Water Efficiency and U.S. Industrial Steam, AIChE Journal, Vol. 59, pp. 2268–2274, 2013.
  • S.V. Garimella, A.S. Fleischer, J.Y. Murthy, A. Keshavarzi, R. Prasher, C. Patel, S.H. Bhavnani, R. Venkatasubramanian, R. Mahajan, Y. Joshi, B. Sammakia, B.A. Myers, L. Chorosinski, M. Baelmans, P. Sathyamurthy, and P.E. Raad, Thermal Challenges in Next-Generation Electronic Systems, IEEE Transactions on Components and Packaging Technologies, Vol. 31, pp. 801–815, 2008.
  • S. Krishnan, S.V. Garimella, G.M. Chrysler, and R.V. Mahajan, Towards a Thermal Moore’s Law, Ieee Transactions on Advanced Packaging, Vol. 30, pp. 462–474, 2007.
  • R. Chen, M.C. Lu, V. Srinivasan, Z. Wang, H.H. Cho, and A. Majumdar, Nanowires for Enhanced Boiling Heat Transfer, Nano Letters, Vol. 9, pp. 548–553, 2009.
  • S.G. Kandlikar, Controlling Bubble Motion over Heated Surface through Evaporation Momentum Force to Enhance Pool Boiling Heat Transfer, Applied Physics Letters, Vol. 102, pp. 051611-1–051611-5, 2013.
  • M. Rahman, E. Olceroglu, and M. McCarthy, Scalable Nanomanufacturing of Virus-Templated Coatings for Enhanced Boiling, Advanced Materials Interfaces, Vol. 1, pp. 1300107-1–1300107-6, 2014.
  • A. Zou and S.C. Maroo, Critical Height of Micro/Nano Structures for Pool Boiling Heat Transfer Enhancement, Applied Physics Letters, Vol. 103, pp. 221602-1–221602-5, 2013.
  • S. Anand, A.T. Paxson, R. Dhiman, J.D. Smith, and K.K. Varanasi, Enhanced Condensation on Lubricant-Impregnated Nanotextured Surfaces, Acs Nano, Vol. 6, pp. 10122–10129, 2012.
  • J.B. Boreyko and C.H. Chen, Self-Propelled Dropwise Condensate on Superhydrophobic Surfaces, Physical Review Letters, Vol. 103, pp. 184501-1–184501-4, 2009.
  • X.M. Chen, J. Wu, R.Y. Ma, M. Hua, N. Koratkar, S.H. Yao, and Z.K. Wang, Nanograssed Micropyramidal Architectures for Continuous Dropwise Condensation, Advanced Functional Materials, Vol. 21, pp. 4617–4623, 2011.
  • N. Miljkovic, R. Enright, Y. Nam, K. Lopez, N. Dou, J. Sack, and E.N. Wang, Jumping-Droplet-Enhanced Condensation on Scalable Superhydrophobic Nanostructured Surfaces, Nano Letters, Vol. 13, pp. 179–187, 2013.
  • X.M. Dai, F.H. Yang, R.G. Yang, Y.C. Lee, and C. Li, Micromembrane-Enhanced Capillary Evaporation, International Journal of Heat and Mass Transfer, Vol. 64, pp. 1101–1108, 2013.
  • R. Xiao, S.C. Maroo, and E.N. Wang, Negative Pressures in Nanoporous Membranes for Thin Film Evaporation, Applied Physics Letters, Vol. 102, pp. 123103-1–123103-4, 2013.
  • J. Kim, Review of Nucleate Pool Boiling Bubble Heat Transfer Mechanisms, International Journal of Multiphase Flow, Vol. 35, pp. 1067–1076, 2009.
  • B.B. Mikic and W.M. Rosenhow, Bubble Growth Rates in Nonuniform Temperature Field, Progress in Heat and Mass Transfer II, Vol. 2, pp. 283–292, 1969.
  • Y.Y. Hsu, On the Size Range of Active Nucleation Cavities on a Heating Surface, Journal of Heat Transfer, Vol. 84, pp. 207–216, 1962.
  • M.G. Cooper and A.J.P. Lloyd, The Microlayer in Nucleate Boiling, International Journal of Heat Mass Transfer, Vol. 12, pp. 895–913, 1969.
  • N. Zuber, Hydrodynamic Aspects of Boiling Heat Transfer, University of California, Los Angeles, 1959.
  • J.H. Lienhard and V.K. Dhir, Hydrodynamic Prediction of Peak Pool-Boiling Heat Fluxes from Finite Bodies, Journal of Heat Transfer Transfer, Vol. 95, pp. 152–158, 1973.
  • W.M.G. Rohsenow, Correlation of Maximum Heat Transfer Data for Boiling of Saturated Liquid, Chemical Engineering Progress Symposium Series, Vol. 52, pp. 47–49, 1956.
  • Y. Katto and S. Yokoya, Principal Mechanism of Boiling Crisis in Pool Boiling, International Journal of Heat Mass Transfer, Vol. 11, pp. 993–996, 1969.
  • H. Sakashita and A. Ono, Boiling Behaviors and Critical Heat Flux on a Horizontal Plate in Saturated Pool Boiling of Water at High Pressures, International Journal of Heat and Mass Transfer, Vol. 52, pp. 744–750, 2009.
  • A.K. Rajvanshi, J.S. Saini, and R. Prakash, Investigation of Macrolayer Thickness in Nucleate Pool Boiling at High Heat-Flux, International Journal of Heat and Mass Transfer, Vol. 35, pp. 343–350, 1992.
  • I. Mudawar, A.H. Howard, and C.O. Gersey, An Analytical Model for Near-Saturated Pool Boiling Critical Heat Flux on Vertical Surfaces, International Journal of Heat and Mass Transfer, Vol. 40, pp. 2327–2339, 1997.
  • C.K. Guan, J.F. Klausner, and R.W. Mei, A New Mechanistic Model for Pool Boiling CHF on Horizontal Surfaces, International Journal of Heat and Mass Transfer, Vol. 54, pp. 3960–3969, 2011.
  • S.G. Kandlikar, A Theoretical Model to Predict Pool Boiling CHF Incorporating Effects of Contact Angle and Orientation, Journal of Heat Transfer, Vol. 123, pp. 1071–1079, 2001.
  • K.-H. Chu, R. Enright, and E.N. Wang, Structured Surfaces for Enhanced Pool Boiling Heat Transfer, Applied Physics Letters, Vol. 100, pp. 241603-1–241603-4, 2012.
  • Z. Yao, Y.W. Lu, and S.G. Kandlikar, Effects of Nanowire Height on Pool Boiling Performance of Water on Silicon Chips, International Journal of Thermal Sciences, Vol. 50, pp. 2084–2090, 2011.
  • H.T. Phan, N. Caney, P. Marty, S. Colasson, and J. Gavillet, Surface Wettability Control by Nanocoating: The Effects on Pool Boiling Heat Transfer and Nucleation Mechanism, International Journal of Heat and Mass Transfer, Vol. 52, pp. 5459–5471, 2009.
  • Y.W. Lu and S.G. Kandlikar, Nanoscale Surface Modification Techniques for Pool Boiling Enhancement—A Critical Review and Future Directions, Heat Transfer Engineering, Vol. 32, pp. 827–842, 2011.
  • M.C. Lu, R. Chen, V. Srinivasan, V.P. Carey, and A. Majumdar, Critical Heat Flux of Pool Boiling on Si Nanowire Array–Coated Surfaces, International Journal of Heat and Mass Transfer, Vol. 54, pp. 5359–5367, 2011.
  • Q. Li, W. Wang, C. Oshman, B. Latour, C. Li, V.M. Bright, Y.-C. Lee, and R. Yang, Enhanced Pool Boiling Performance on Micro-, Nano-, and Hybrid-Structured Surfaces, ASME Conference Proceedings, Vol. 2011, pp. 633–640, 2011.
  • C. Li, Z. Wang, P.I. Wang, Y. Peles, N. Koratkar, and G.P. Peterson, Nanostructured Copper Interfaces for Enhanced Boiling, Small, Vol. 4, pp. 1084–1088, 2008.
  • H. Kim, B. Truong, J. Buongiorno, and L.W. Hu, On the Effect of Surface Roughness Height, Wettability, and Nanoporosity on Leidenfrost Phenomena, Applied Physics Letters, Vol. 98, pp. 083121-1–083121-3, 2011.
  • T.J. Hendricks, S. Krishnan, C.H. Choi, C.H. Chang, and B. Paul, Enhancement of Pool-Boiling Heat Transfer Using Nanostructured Surfaces on Aluminum and Copper, International Journal of Heat and Mass Transfer, Vol. 53, pp. 3357–3365, 2010.
  • E. Forrest, E. Williamson, J. Buongiorno, L. Hu, M. Rubner, and R. Cohen, Augmentation of Nucleate Boiling Heat Transfer and Critical Heat Flux Using Nanoparticle Thin-Film Coatings, International Journal of Heat and Mass Transfer, Vol. 53, pp. 58–67, 2010.
  • K.-H. Chu, Y.S. Joung, R. Enright, C.R. Buie, and E.N. Wang, Hierarchically Structured Surfaces for Boiling Critical Heat Flux Enhancement, Applied Physics Letters, Vol. 102, pp. 151602-1–151602-4, 2013.
  • B.K. Bon, J.F. Klausner, and E. McKenna, The Hoodoo: A New Surface Structure for Enhanced Boiling Heat Transfer, Journal of Thermal Science and Engineering Applications, Vol. 5, pp. 011003-1–011003-11, 2013.
  • A.R. Betz, J. Xu, H.H. Qiu, and D. Attinger, Do Surfaces with Mixed Hydrophilic and Hydrophobic Areas Enhance Pool Boiling? Applied Physics Letters, Vol. 97, pp. 141909-1–141909-3, 2010.
  • A.R. Betz, J. Jenkins, C.J. Kim, and D. Attinger, Boiling Heat Transfer on Superhydrophilic, Superhydrophobic, and Superbiphilic Surfaces, International Journal of Heat and Mass Transfer, Vol. 57, pp. 733–741, 2013.
  • J.L. Alvarado and Y.P. Lin, Nanostructured Surfaces for Enhanced Spray Cooling, 27th Army Science Conference, 29 November-2 December 2010, Orlando, FL, 2010.
  • H.S. Ahn, V. Sathyamurthi, and D. Banerjee, Pool Boiling Experiments on a Nano-structured Surface, IEEE Transactions on Components and Packaging Technologies, Vol. 32, pp. 156–165, 2009.
  • H.S. Ahn, H.J. Jo, S.H. Kang, and M.H. Kim, Effect of Liquid Spreading Due to Nano/Microstructures on the Critical Heat Flux during Pool Boiling, Applied Physics Letters, Vol. 98, pp. 071908-1–071908-3, 2011.
  • H.S. Ahn, G. Park, J.M. Kim, J. Kim, and M.H. Kim, The Effect of Water Absorption on Critical Heat Flux Enhancement during Pool Boiling, Experimental Thermal and Fluid Science, Vol. 42, pp. 187–195, 2012.
  • J.W. Rose, Dropwise Condensation Theory and Experiment: A Review, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol. 216, pp. 115–128, 2002.
  • K. Rykaczewski, Microdroplet Growth Mechanism during Water Condensation on Superhydrophobic Surfaces, Langmuir, Vol. 28, pp. 7720–7729, 2012.
  • J.P. Rothstein, Slip on Superhydrophobic Surfaces, in Annual Review of Fluid Mechanics, in S. H. Davis and P. Moin (eds.), Vol. 42, pp. 89–109, Annual Reviews, Palo Alto, CA, 2010.
  • L. Mishchenko, B. Hatton, V. Bahadur, J.A. Taylor, T. Krupenkin, and J. Aizenberg, Design of Ice-Free Nanostructured Surfaces Based on Repulsion of Impacting Water Droplets, ACS Nano, Vol. 4, pp. 7699–7707, 2010.
  • K. Lau, J. Bico, K. Teo, M. Chhowalla, G. Amaratunga, W. Milne, G. McKinley, and K. Gleason, Superhydrophobic Carbon Nanotube Forests, Nano Letters, Vol. 3, pp. 1701–1705, 2003.
  • Z. Lan, X.H. Ma, S.F. Wang, M.Z. Wang, and X.N. Li, Effects of Surface Free Energy and Nanostructures on Dropwise Condensation, Chemical Engineering Journal, Vol. 156, pp. 546–552, 2010.
  • K. Koch, B. Bhushan, Y.C. Jung, and W. Barthlott, Fabrication of Artificial Lotus Leaves and Significance of Hierarchical Structure for Superhydrophobicity and Low Adhesion, Soft Matter, Vol. 5, pp. 1386–1393, 2009.
  • X.J. Feng and L. Jiang, Design and Creation of Superwetting/Antiwetting Surfaces, Advanced Materials, Vol. 18, pp. 3063–3078, 2006.
  • C. Dietz, K. Rykaczewski, A.G. Fedorov, and Y. Joshi, Visualization of Droplet Departure on a Superhydrophobic Surface and Implications to Heat Transfer Enhancement during Dropwise Condensation, Applied Physics Letters, Vol. 97, pp. 071908-3–071908-3, 2010.
  • C.H. Chen, Q.J. Cai, C.L. Tsai, C.L. Chen, G.Y. Xiong, Y. Yu, and Z.F. Ren, Dropwise Condensation on Superhydrophobic Surfaces with Two-Tier Roughness, Applied Physics Letters, Vol. 90, pp. 173108-1–173108-3, 2007.
  • F.-C. Wang, F.H. Yang, and Y.-P. Zhao, Size Effect on the Coalescence-Induced Self-Propelled Droplet, Applied Physics Letters, Vol. 98, pp. 053112-1–053112-3, 2011.
  • N. Miljkovic and E.N. Wang, Condensation Heat Transfer on Superhydrophobic Surfaces, MRS Bulletin, Vol. 38, pp. 397–406, 2013.
  • N. Miljkovic, D.J. Preston, R. Enright, and E.N. Wang, Electric-Field-Enhanced Condensation on Superhydrophobic Nanostructured Surfaces, ACS Nano, Vol. 7, pp. 11043–11054, 2013.
  • N. Miljkovic, D.J. Preston, R. Enright, S. Adera, Y. Nam, and E.N. Wang, Jumping Droplet Dynamics on Scalable Nanostructured Superhydrophobic Surfaces, Journal of Heat Transfer, Vol. 135, pp. 080907-1–080907-1, 2013.
  • N. Miljkovic, R. Enright, and E.N. Wang, Modeling and Optimization of Superhydrophobic Condensation, Journal of Heat Transfer, Vol. 135, pp. 111004-1–111004-14, 2013.
  • N. Miljkovic, R. Enright, and E.N. Wang, Effect of Droplet Morphology on Growth Dynamics and Heat Transfer during Condensation on Superhydrophobic Nanostructured Surfaces, ACS Nano, Vol. 6, pp. 1776–1785, 2012.
  • K. Rykaczewski, J.H.J. Scott, and A.G. Fedorov, Electron Beam Heating Effects during Environmental Scanning Electron Microscopy Imaging of Water Condensation on Superhydrophobic Surfaces, Applied Physics Letters, Vol. 98, pp. 093106-1–093106-3, 2011.
  • K. Rykaczewski, A.T. Paxson, S. Anand, X. Chen, Z. Wang, and K.K. Varanasi, Multimode Multidrop Serial Coalescence Effects during Condensation on Hierarchical Superhydrophobic Surfaces, Langmuir, Vol. 29, pp. 881–891, 2013.
  • T.Q. Liu, W. Sun, X.Y. Sun, and H.R. Ai, Mechanism Study of Condensed Drops Jumping on Super-hydrophobic Surfaces, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 414, pp. 366–374, 2012.
  • J. Feng, Z. Qin, and S. Yao, Factors Affecting the Spontaneous Motion of Condensate Drops on Superhydrophobic Copper Surfaces, Langmuir, Vol. 28, pp. 6067–6075, 2012.
  • R. Enright, N. Miljkovic, N. Dou, Y. Nam, and E.N. Wang, Condensation on Superhydrophobic Copper Oxide Nanostructures, Journal of Heat Transfer, Vol. 135, pp. 091304-1–091304-12, 2013.
  • R. Enright, N. Miljkovic, A. Al-Obeidi, C.L.V. Thompson, and E.N. Wang, Condensation on Superhydrophobic Surfaces: The Role of Local Energy Barriers and Structure Length Scale, Langmuir, Vol. 28, pp. 14424–14432, 2012.
  • R. Xiao, N. Miljkovic, R. Enright, and E.N. Wang, Immersion Condensation on Oil-Infused Heterogeneous Surfaces for Enhanced Heat Transfer, Scientific Reports, Vol. 3, pp. 1988-1–1988-6, 2013.
  • P. Kim, T.S. Wong, J. Alvarenga, M.J. Kreder, W.E. Adorno-Martinez, and J. Aizenberg, Liquid-Infused Nanostructured Surfaces with Extreme Anti-Ice and Anti-Frost Performance, ACS Nano, Vol. 6, pp. 6569–6577, 2012.
  • S.C. Maroo and J.N. Chung, Fundamental Roles of Nonevaporating Film and Ultrahigh Heat Flux Associated with Nanoscale Meniscus Evaporation in Nucleate Boiling, Journal of Heat Transfer, Vol. 135, pp. 061501-1–061501-10, 2013.
  • W.R. Gambill and J.H. Lienhard, An Upper Bound for the Critical Boiling Heat Flux, Journal of Heat Transfer, Vol. 111, pp. 815–818, 1989.
  • P. Stephan and J. Hammer, A New Model for Nucleate Boiling Heat Transfer, Heat and Mass Transfer, Vol. 30, pp. 119–125, 1994.
  • T.D. Wheeler and A.D. Stroock, The Transpiration of Water at Negative Pressures in a Synthetic Tree, Nature, Vol. 455, pp. 208–212, 2008.
  • F. Su, H. Ma, X. Han, H. Chen, and B. Tian, Ultra-high Cooling Rate Utilizing Thin Film Evaporation, Applied Physics Letters, Vol. 101, pp. 113702-1–113702-3, 2012.
  • D. Pence, The Simplicity of Fractal-like Flow Networks for Effective Heat and Mass Transport, Experimental Thermal and Fluid Science, Vol. 34, pp. 474–486, 2010.
  • S. Narayanan, A.G. Fedorov, and Y.K. Joshi, Interfacial Transport of Evaporating Water Confined in Nanopores, Langmuir, Vol. 27, pp. 10666–10676, 2011.
  • Y. Nam, S. Sharratt, G. Cha, and Y.S. Ju, Characterization and Modeling of the Heat Transfer Performance of Nanostructured Cu Micropost Wicks, Journal of Heat Transfer, Vol. 133, pp. 101502–101502, 2011.
  • J.W. Judy, Microelectromechanical Systems (MEMS): Fabrication, Design and Applications, Smart Materials & Structures, Vol. 10, pp. 1115–1134, 2001.
  • I. Gurrappa and L. Binder, Electrodeposition of Nanostructured Coatings and Their Characterization—A Review, Science and Technology of Advanced Materials, Vol. 9, pp. 043001-1–043001-11, 2008.
  • S.M. George, Atomic Layer Deposition: An Overview, Chemical Reviews, Vol. 110, pp. 111–131, 2010.
  • M. Leskela and M. Ritala, Atomic Layer Deposition (ALD): From Precursors to Thin Film Structures, Thin Solid Films, Vol. 409, pp. 138–146, 2002.
  • M. Altissimo, E-beam Lithography for Micro-/Nanofabrication, Biomicrofluidics, Vol. 4, pp. 3–6, 2010.
  • H. O’Hanley, C. Coyle, J. Buongiorno, T. McKrell, L.-W. Hu, M. Rubner, and R. Cohen, Separate Effects of Surface Roughness, Wettability, and Porosity on the Boiling Critical Heat Flux, Applied Physics Letters, Vol. 103, pp. 024102-1–024102-5, 2013.
  • K. Varanasi, M. Hsu, N. Bhate, W. Yang, and T. Deng, Spatial Control in the Heterogeneous Nucleation of Water, Applied Physics Letters, Vol. 95, pp. 094101-1–094101-3, 2009.
  • G.T.A. Kovacs, N.I. Maluf, and K.E. Petersen, Bulk Micromachining of Silicon, Proceedings of the IEEE, Vol. 86, pp. 1536–1551, 1998.
  • E.H. Klaassen, K. Petersen, J.M. Noworolski, J. Logan, N.I. Maluf, J. Brown, C. Storment, W. McCulley, and G.T.A. Kovacs, Silicon Fusion Bonding and Deep Reactive Ion Etching: A New Technology for Microstructures, Sensors and Actuators A - Physical, Vol. 52, pp. 132–139, 1996.
  • D. Cooke and S.G. Kandlikar, Pool Boiling Heat Transfer and Bubble Dynamics over Plain and Enhanced Microchannels, Journal of Heat Transfer, Vol. 133, pp. 052902-1–052902-9, 2011.
  • S.Y. Chou, P.R. Krauss, W. Zhang, L.J. Guo, and L. Zhuang, Sub-10 nm Imprint Lithography and Applications, Journal of Vacuum Science & Technology B, Vol. 15, pp. 2897–2904, 1997.
  • Y. Liu, J. Goebl, and Y. Yin, Templated Synthesis of Nanostructured Materials, Chemical Society Reviews, Vol. 42, pp. 2610–2653, 2013.
  • B.B. Lakshmi, C.J. Patrissi, and C.R. Martin, Sol-Gel Template Synthesis of Semiconductor Oxide Micro- and Nanostructures, Chemistry of Materials, Vol. 9, pp. 2544–2550, 1997.
  • H. Masuda, H. Yamada, M. Satoh, H. Asoh, M. Nakao, and T. Tamamura, Highly Ordered Nanochannel-Array Architecture in Anodic Alumina, Applied Physics Letters, Vol. 71, pp. 2770–2772, 1997.
  • Y. Im, Y. Joshi, C. Dietz, and S.S. Lee, Enhanced Boiling of a Dielectric Liquid on Copper Nanowire Surfaces, International Journal of Micro-Nano Scale Transport, Vol. 1, pp. 79–96, 2010.
  • H. Yasuoka, M. Yoshida, K. Sugita, K. Ohdaira, H. Murata, and H. Matsumura, Fabrication of PTFE Thin Films by Dual Catalytic Chemical Vapor Deposition Method, Thin Solid Films, Vol. 516, pp. 687–690, 2008.
  • D.J. Evans, The Bionanoscience of Plant Viruses: Templates and Synthons for New Materials, Journal of Materials Chemistry, Vol. 18, pp. 3746–3754, 2008.
  • X.Z. Fan, E. Pomerantseva, M. Gnerlich, A. Brown, K. Gerasopoulos, M. McCarthy, J.N. Culver, and R. Ghodssi, Tobacco Mosaic Virus: A Biological Building Block for Micro/Nano/Bio Systems, Journal of Vacuum Science & Technology A, Vol. 31, pp. 050815-1–050815-24, 2013.
  • K. Gerasopoulos, M. McCarthy, P. Banerjee, X. Fan, J.N. Culver, and R. Ghodssi, Biofabrication Methods for the Patterned Assembly and Synthesis of Viral Nanotemplates, Nanotechnology, Vol. 21, pp. 055304-1–055304-11, 2010.
  • K. Gerasopoulos, M. McCarthy, E. Royston, J.N. Culver, and R. Ghodssi, Nanostructured Nickel Electrodes Using the Tobacco Mosaic Virus for Microbattery Applications, Journal of Micromechanics and Microengineering, Vol. 18, pp. 104003-1–104003-8, 2008.
  • R.S. Wagner and W.C. Ellis, Vapor–Liquid–Solid Mechanism of Single Crystal Growth, Applied Physics Letters, Vol. 4, pp. 89–90, 1964.
  • A.M. Morales and C.M. Lieber, A Laser Ablation Method for the Synthesis of Crystalline Semiconductor Nanowires, Science, Vol. 279, pp. 208–211, 1998.
  • S. Iijima, Helical Microtubule of Graphitic Carbon, Nature, Vol. 354, pp. 56–58, 1991.
  • M. Kumar and Y. Ando, Chemical Vapor Deposition of Carbon Nanotubes: A Review on Growth Mechanism and Mass Production, Journal of Nanoscience and Nanotechnology, Vol. 10, pp. 3739–3758, 2010.
  • M.L. Terranova, V. Sessa, and M. Rossi, The World of Carbon Nanotubes: An Overview of CVD Growth Methodologies, Chemical Vapor Deposition, Vol. 12, pp. 315–325, 2006.
  • J.-P. Tessonnier and D.S. Su, Recent Progress on the Growth Mechanism of Carbon Nanotubes: A Review, ChemSusChem, Vol. 4, pp. 824–847, 2011.
  • H.S. Ahn, N. Sinha, M. Zhang, D. Banerjee, S.K. Fang, and R.H. Baughman, Pool Boiling Experiments on Multiwalled Carbon Nanotube (MWCNT) Forests, Journal of Heat Transfer, Vol. 128, pp. 1335–1342, 2006.
  • V. Sathyamurthi, H.-S. Ahn, D. Banerjee, and S.C. Lau, Subcooled Pool Boiling Experiments on Horizontal Heaters Coated with Carbon Nanotubes, Journal of Heat Transfer, Vol. 131, pp. 071501-1-10, 2009.
  • S. Ujereh, T. Fisher, and I. Mudawar, Effects of Carbon Nanotube Arrays on Nucleate Pool Boiling, International Journal of Heat and Mass Transfer, Vol. 50, pp. 4023–4038, 2007.
  • M. Ge, X. Fang, J. Rong, and C. Zhou, Review of Porous Silicon Preparation and Its Application for Lithium–Ion Battery Anodes, Nanotechnology, Vol. 24, pp. 422001-1–422001-10, 2013.
  • M.S. El-Genk and A.F. Ali, Enhanced Nucleate Boiling on Copper Micro-porous Surfaces, International Journal of Multiphase Flow, Vol. 36, pp. 780–792, 2010.
  • N. Miljkovic, R. Xiao, D.J. Preston, R. Enright, I. McKay, and E.N. Wang, Condensation on Hydrophilic, Hydrophobic, Nanostructured Superhydrophobic and Oil-Infused Surfaces, Journal of Heat Transfer, Vol. 135, pp. 080906-1–080906-1, 2013.
  • S. Kim, H.D. Kim, H. Kim, H.S. Ahn, H.J. Jo, J. Kim, and M.H. Kim, Effects of Nano-fluid and Surfaces with Nano Structure on the Increase of CHF, Experimental Thermal and Fluid Science, Vol. 34, pp. 487–495, 2010.
  • P. Roy, S. Berger, and P. Schmuki, TiO2 Nanotubes: Synthesis and Applications, Angewandte Chemie - International Edition, Vol. 50, pp. 2904–2939, 2011.
  • M.M. Hawkeye and M. J. Brett, Glancing Angle Deposition: Fabrication, Properties, and Applications of Micro- and Nanostructured Thin Films, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, Vol. 25, pp. 1317–1335, 2007.
  • S. Pursel, M.W. Horn, M.C. Demirel, and A. Lakhtakia, Growth of Sculptured Polymer Submicronwire Assemblies by Vapor Deposition, Polymer, Vol. 46, pp. 9544–9548, 2005.
  • M.C. Demirel, S. Boduroglu, M. Cetinkaya, and A. Lakhtakia, Spatially Organized Free-Standing Poly(p-xylylene) Nanowires Fabricated by Vapor Deposition, Langmuir, Vol. 23, pp. 5861–5863, 2007.
  • S. Launay, A.G. Fedorov, Y. Joshi, A. Cao, and P.M. Ajayan, Hybrid Micro-Nano Structured Thermal Interfaces for Pool Boiling Heat Transfer Enhancement, Microelectronics Journal, Vol. 37, pp. 1158–1164, 2006.
  • Z. Yao, Y.-W. Lu, and S.G. Kandlikar, Pool Boiling Heat Transfer Enhancement Through Nanostructures on Silicon Microchannels, Journal of Nanotechnology in Engineering and Medicine, Vol. 3, pp. 031002-1–031002-8, 2012.
  • K. Gerasopoulos, E. Pomerantseva, M. McCarthy, A. Brown, C.S. Wang, J. Culver, and R. Ghodssi, Hierarchical Three-Dimensional Microbattery Electrodes Combining Bottom-Up Self-Assembly and Top-Down Micromachining, ACS Nano, Vol. 6, pp. 6422–6432, 2012.
  • M. McCarthy, K. Gerasopoulos, R. Enright, J.N. Culver, R. Ghodssi, and E.N. Wang, Biotemplated Hierarchical Surfaces and the Role of Dual Length Scales on the Repellency of Impacting Droplets, Applied Physics Letters, Vol. 100, pp. 263701-1–263701-5, 2012.
  • S. Tawfick, M. De Volder, D. Copic, S.J. Park, C.R. Oliver, E.S. Polsen, M.J. Roberts, and A.J. Hart, Engineering of Micro- and Nanostructured Surfaces with Anisotropic Geometries and Properties, Advanced Materials, Vol. 24, pp. 1628–1674, 2012.
  • T. Tanaka, M. Morigami, and N. Atoda, Mechanism of Resist Pattern Collapse during Development Process, Japanese Journal of Applied Physics Part 1 - Regular Papers Short Notes & Review Papers, Vol. 32, pp. 6059–6064, 1993.
  • M. De Volder and A.J. Hart, Engineering Hierarchical Nanostructures by Elastocapillary Self-Assembly, Angewandte Chemie - International Edition, Vol. 52, pp. 2412–2425, 2013.
  • M. De Volder, S.H. Tawfick, S.J. Park, D. Copic, Z.Z. Zhao, W. Lu, and A.J. Hart, Diverse 3D Microarchitectures Made by Capillary Forming of Carbon Nanotubes, Advanced Materials, Vol. 22, pp. 4384–4389, 2010.
  • B. Pokroy, S.H. Kang, L. Mahadevan, and J. Aizenberg, Self-Organization of a Mesoscale Bristle into Ordered, Hierarchical Helical Assemblies, Science, Vol. 323, pp. 237–240, 2009.
  • K.-H. Chu, R. Xiao, and E.N. Wang, Uni-directional Liquid Spreading on Asymmetric Nanostructured Surfaces, Nature Mater, Vol. 9, pp. 413–417, 2010.
  • P. Kim, A.K. Epstein, M. Khan, L.D. Zarzar, D.J. Lipomi, G.M. Whitesides, and J. Aizenberg, Structural Transformation by Electrodeposition on Patterned Substrates (STEPS): A New Versatile Nanofabrication Method, Nano Letters, Vol. 12, pp. 527–533, 2011.
  • T.I. Kim, H.E. Jeong, K.Y. Suh, and H.H. Lee, Stooped Nanohairs: Geometry-Controllable, Unidirectional, Reversible, and Robust Gecko-like Dry Adhesive, Advanced Materials, Vol. 21, pp. 2276–2281, 2009.
  • T.I. Kim and K.Y. Suh, Unidirectional Wetting and Spreading on Stooped Polymer Nanohairs, Soft Matter, Vol. 5, pp. 4131–4135, 2009.
  • M.K. Kwak, H.-E. Jeong, T.I. Kim, H. Yoon, and K.Y. Suh, Bio-inspired Slanted Polymer Nanohairs for Anisotropic Wetting and Directional Dry Adhesion, Soft Matter, Vol. 6, pp. 1849–1857, 2010.
  • H. Yoon, H.E. Jeong, T.I. Kim, T.J. Kang, D. Tahk, K. Char, and K.Y. Suh, Adhesion Hysteresis of Janus Nanopillars Fabricated by Nanomolding and Oblique Metal Deposition, Nano Today, Vol. 4, pp. 385–392, 2009.
  • J. Cheng, C.S. Liu, S. Shang, D. Liu, W. Perrie, G. Dearden, and K. Watkins, A Review of Ultrafast Laser Materials Micromachining, Optics and Laser Technology, Vol. 46, pp. 88–102, 2013.
  • W.Z. Chang, T.W. Wu, H.G. Winful, and A. Galvanauskas, Array Size Scalability of Passively Coherently Phased Fiber Laser Arrays, Optics Express, Vol. 18, pp. 9634–9642, 2010.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.