Subcooled Flow Boiling Over Microstructured Plates In Rectangular Minichannels

References

• A. Torregrosa, A. Broatch, P. Olmeda, and O. Cornejo, Experiments on Subcooled Flow Boiling in IC Engine-Like Conditions at Low Flow Velocities, Experimental Thermal and Fluid Science, Vol. 52, No. pp. 347–354, 2014.
   Web of Science ®Google Scholar
• H. Jo, H.S. Ahn, S. Kang, and M.H. Kim, A Study of Nucleate Boiling Heat Transfer on Hydrophilic, Hydrophobic and Heterogeneous Wetting Surfaces, International Journal of Heat and Mass Transfer, Vol. 54, No. 25, pp. 5643–5652, 2011.
   Web of Science ®Google Scholar
• M.S. El-Genk, and A.F. Ali, Enhanced Nucleate Boiling on Copper Micro-Porous Surfaces, International Journal of Multiphase Flow, Vol. 36, No. 10, pp. 780–792, 2010.
   Web of Science ®Google Scholar
• J.P. McHale and S.V. Garimella, Nucleate Boiling from Smooth and Rough Surfaces—Part 2: Analysis of Surface Roughness Effects on Nucleate Boiling, Experimental Thermal and Fluid Science, Vol. 44, No. pp. 439–455, 2013.
   Web of Science ®Google Scholar
• E. Martínez-Galván, R. Antón, J.C. Ramos, and R. Khodabandeh, Influence of Surface Roughness on a Spray Cooling System with R134a. Part I: Heat Transfer Measurements, Experimental Thermal and Fluid Science, Vol. 46, No. pp. 183–190, 2013.
   Web of Science ®Google Scholar
• M. Şeşen, E. Demir, T. İzci, W. Khudhayer, T. Karabacak, and A. Koşar, Submerged Jet Impingement Cooling Using Nanostructured Plates, International Journal of Heat and Mass Transfer, Vol. 59, No. pp. 414–422, 2013.
   Web of Science ®Google Scholar
• T. Çıkım, E. Armağan, G.O. Ince, and A. Koşar, Flow Boiling Enhancement in Microtubes with Crosslinked pHEMA Coatings and the Effect of Coating Thickness, Journal of Heat Transfer, Vol. 136, No. 8, pp. 081504, 2014.
   Google Scholar
• M. Şeşen, W. Khudhayer, T. Karabacak, and A. Koşar, Compact Nanostructure Integrated Pool Boiler for Microscale Cooling Applications, Micro & Nano Letters, Vol. 5, No. 4, pp. 203–206, 2010.
   Web of Science ®Google Scholar
• E. Demir, T. Izci, A.S. Alagoz, T. Karabacak, and A. Koşar, Effect of Silicon Nanorod Length on Horizontal Nanostructured Plates in Pool Boiling Heat Transfer with Water, International Journal of Thermal Sciences, Vol. 82, No. pp. 111–121, 2014.
   Web of Science ®Google Scholar
• E. Demir, T. İzci, W.J. Khudhayer, A.S. Alagöz, T. Karabacak, and A. Koşar, The Effect of Nanostructure Distribution on Subcooled Boiling Heat Transfer Enhancement over Nanostructured Plates Integrated into a Rectangular Channel, Nanoscale and Microscale Thermophysical Engineering, Vol. 18, No. 4, pp. 313–328, 2014.
   Web of Science ®Google Scholar
• M. Jakob, Heat Transfer in Evaporation and Condensation, Champaign, IL: University of Illinois, 1937.
   Google Scholar
• V. Dhir, Nucleate and Transition Boiling Heat Transfer under Pool and External Flow Conditions, International Journal of Heat and Fluid Flow, Vol. 12, No. 4, pp. 290–314, 1991.
   Web of Science ®Google Scholar
• D.E. Kim, D.I. Yu, D.W. Jerng, M.H. Kim, and H.S. Ahn, Review of Boiling Heat Transfer Enhancement on Micro/Nanostructured Surfaces, Experimental Thermal and Fluid Science, Vol. 66, No. pp. 173–196, 2015.
   Web of Science ®Google Scholar
• L. Guo, H. Xu, and L. Gong, Influence of Wall Roughness Models on Fluid Flow and Heat Transfer in Microchannels, Applied Thermal Engineering, Vol. 84, No. pp. 399–408, 2015.
   Web of Science ®Google Scholar
• P. Berenson, Experiments on Pool-Boiling Heat Transfer, International Journal of Heat and Mass Transfer, Vol. 5, No. 10, pp. 985–999, 1962.
   Google Scholar
• H. Sauer Jr., R. Medrow, and A. Sinnarwalla, Effects of Surface Condition on Nucleate Boiling of Refrigerant-11, ASHRAE Transactions, Vol. 81, No. part 2, pp. 274–228, 1975.
   Google Scholar
• S.R. Chowdhury and R. Winterton, Surface Effects in Pool Boiling, International Journal of Heat and Mass Transfer, Vol. 28, No. 10, pp. 1881–1889, 1985.
   Web of Science ®Google Scholar
• L.-H. Chien and R.L. Webb, Visualization of Pool Boiling on Enhanced Surfaces, Experimental Thermal and Fluid Science, Vol. 16, No. 4, pp. 332–341, 1998.
   Web of Science ®Google Scholar
• L.-H. Chien and R.L. Webb, Measurement of Bubble Dynamics on an Enhanced Boiling Surface, Experimental Thermal and Fluid Science, Vol. 16, No. 3, pp. 177–186, 1998.
   Web of Science ®Google Scholar
• L.-H. Chien and R.L. Webb, A Nucleate Boiling Model for Structured Enhanced Surfaces, International Journal of Heat and Mass Transfer, Vol. 41, No. 14, pp. 2183–2195, 1998.
   Web of Science ®Google Scholar
• M. Piasecka, The Use of Enhanced Surface in Flow Boiling Heat Transfer in a Rectangular Minichannel, Experimental Heat Transfer, Vol. 27, No. 3, pp. 231–255, 2014.
   Web of Science ®Google Scholar
• Y. Sun, L. Zhang, H. Xu, and X. Zhong, Subcooled Flow Boiling Heat Transfer from Microporous Surfaces in a Small Channel, International Journal of Thermal Sciences, Vol. 50, No. 6, pp. 881–889, 2011.
   Web of Science ®Google Scholar
• R. Benjamin and A. Balakrishnan, Nucleation Site Density in Pool Boiling of Saturated Pure Liquids: Effect of Surface Microroughness and Surface and Liquid Physical Properties, Experimental Thermal and Fluid Science, Vol. 15, No. 1, pp. 32–42, 1997.
   Web of Science ®Google Scholar
• A. Messina and E. Park, Effects of Precise Arrays of Pits on Nucleate Boiling, International Journal of Heat and Mass Transfer, Vol. 24, No. 1, pp. 141–145, 1981.
   Web of Science ®Google Scholar
• K. Ferjančič and I. Golobič, Surface Effects on Pool Boiling CHF, Experimental Thermal and Fluid Science, Vol. 25, No. 7, pp. 565–571, 2002.
   Web of Science ®Google Scholar
• C.S. Kumar, S. Suresh, L. Yang, Q. Yang, and S. Aravind, Flow Boiling Heat Transfer Enhancement Using Carbon Nanotube Coatings, Applied Thermal Engineering, Vol. 65, No. 1, pp. 166–175, 2014.
   Web of Science ®Google Scholar
• F. Yang, X. Dai, Y. Peles, P. Cheng, J. Khan, and C. Li, Flow Boiling Phenomena in a Single Annular Flow Regime in Microchannels (I): Characterization of Flow Boiling Heat Transfer, International Journal of Heat and Mass Transfer, Vol. 68, No. pp. 703–715, 2014.
   Web of Science ®Google Scholar
• T. Alam, P.S. Lee, and C.R. Yap, Effects of Surface Roughness on Flow Boiling in Silicon Microgap Heat Sinks, International Journal of Heat and Mass Transfer, Vol. 64, No. pp. 28–41, 2013.
   Web of Science ®Google Scholar
• J.-Y. Jung and H.-Y. Kwak, Effect of Surface Condition on Boiling Heat Transfer from Silicon Chip with Submicron-Scale Roughness, International Journal of Heat and Mass Transfer, Vol. 49, No. 23, pp. 4543–4551, 2006.
   Web of Science ®Google Scholar
• M.-G. Kang, Effect of Surface Roughness on Pool Boiling Heat Transfer, International Journal of Heat and Mass Transfer, Vol. 43, No. 22, pp. 4073–4085, 2000.
   Web of Science ®Google Scholar
• J. Koo and C. Kleinstreuer, Analysis of Surface Roughness Effects on Heat Transfer in Micro-Conduits, International Journal of Heat and Mass Transfer, Vol. 48, No. 13, pp. 2625–2634, 2005.
   Web of Science ®Google Scholar
• M. Mpholo, T. Mathaba, and H.H. Bau, A 2D Analysis of Surface Roughness for Prediction of Boiling Incipience, International Journal of Heat and Mass Transfer, Vol. 53, No. 7, pp. 1313–1318, 2010.
   Web of Science ®Google Scholar
• J.M.S. Jabardo, G. Ribatski, and E. Stelute, Roughness and Surface Material Effects on Nucleate Boiling Heat Transfer from Cylindrical Surfaces to Refrigerants R-134a and R-123, Experimental Thermal and Fluid Science, Vol. 33, No. 4, pp. 579–590, 2009.
   Web of Science ®Google Scholar
• D. Deng, R. Chen, Y. Tang, L. Lu, T. Zeng, and W. Wan, A Comparative Study of Flow Boiling Performance in Reentrant Copper Microchannels and Reentrant Porous Microchannels with Multi-Scale Rough Surface, International Journal of Multiphase Flow, Vol. 72, No. pp. 275–287, 2015.
   Web of Science ®Google Scholar
• S. Ahmad, T. Karayiannis, D. Kenning, and A. Luke, Compound Effect of EHD and Surface Roughness in Pool Boiling and CHF with R-123, Applied Thermal Engineering, Vol. 31, No. 11, pp. 1994–2003, 2011.
   Web of Science ®Google Scholar
• M. Paz, M. Conde, E. Suárez, and M. Concheiro, On the Effect of Surface Roughness and Material on the Subcooled Flow Boiling of Water: Experimental Study and Global Correlation, Experimental Thermal and Fluid Science, Vol. 64, No. pp. 114–124, 2015.
   Web of Science ®Google Scholar
• Z.S. Saifaldeen, K.R. Khedir, M.F. Cansizoglu, T. Demirkan, and T. Karabacak, Superamphiphobic Aluminum Alloy Surfaces with Micro and Nanoscale Hierarchical Roughness Produced by a Simple and Environmentally Friendly Technique, Journal of Materials Science, Vol. 49, No. 4, pp. 1839–1853, 2014.
   Web of Science ®Google Scholar
• M. Shoji and X.-Y. Zhang, Study of Contact Angle Hysteresis. In Relation to Boiling Surface Wettability, JSME International Journal Series B Fluids and Thermal Engineering, Vol. 37, No. 3, pp. 560–567, 1994.
   Web of Science ®Google Scholar
• A. Mukherjee and S.G. Kandlikar, Numerical Study of Single Bubbles with Dynamic Contact Angle during Nucleate Pool Boiling, International Journal of Heat and Mass Transfer, Vol. 50, No. 1, pp. 127–138, 2007.
   Web of Science ®Google Scholar
• S.J. Kline and F. McClintock, Describing Uncertainties in Single-Sample Experiments, Mechanical Engineering, Vol. 75, No. 1, pp. 3–8, 1953.
   Google Scholar
• V. Dharaiya and S. Kandlikar, Numerical Investigation of Heat Transfer in Rectangular Microchannels under H2 Boundary Condition during Developing and Fully Developed Laminar Flow, Journal of Heat Transfer, Vol. 134, No. 2, pp. 020911, 2012.
   Google Scholar
• R. Shah, Laminar Flow Friction and Forced Convection Heat Transfer in Ducts of Arbitrary Geometry, International Journal of Heat and Mass Transfer, Vol. 18, No. 7, pp. 849–862, 1975.
   Web of Science ®Google Scholar
• L. Rayleigh VIII, On the Pressure Developed in a Liquid during the Collapse of a Spherical Cavity, The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, Vol. 34, No. 200, pp. 94–98, 1917.
   Google Scholar
• B. Mikic, W. Rohsenow, and P. Griffith, On Bubble Growth Rates, International Journal of Heat and Mass Transfer, Vol. 13, No. 4, pp. 657–666, 1970.
   Web of Science ®Google Scholar
• J.P. McHale and S.V. Garimella, Bubble Nucleation Characteristics in Pool Boiling of a Wetting Liquid on Smooth and Rough Surfaces, International Journal of Multiphase Flow, Vol. 36, No. 4, pp. 249–260, 2010.
   Web of Science ®Google Scholar
• E.E. Michaelides, Hydrodynamic Force and Heat/Mass Transfer from Particles, Bubbles, and Drops—The Freeman Scholar Lecture, Journal of Fluids Engineering, Vol. 125, No. 2, pp. 209–238, 2003.
   Web of Science ®Google Scholar
• M. Ishii and N. Zuber, Drag Coefficient and Relative Velocity in Bubbly, Droplet or Particulate Flows, AIChE Journal, Vol. 25, No. 5, pp. 843–855, 1979.
   Web of Science ®Google Scholar
• Y. Hsu, On the Size Range of Active Nucleation Cavities on a Heating Surface, Journal of Heat Transfer, Vol. 84, No. 3, pp. 207–213, 1962.
   Google Scholar
• N. Basu, G.R. Warrier, and V.K. Dhir, Onset of Nucleate Boiling and Active Nucleation Site Density during Subcooled Flow Boiling, Journal of Heat Transfer, Vol. 124, No. 4, pp. 717–728, 2002.
   Web of Science ®Google Scholar
• J.D. Bernardin and I. Mudawar, A Cavity Activation and Bubble Growth Model of the Leidenfrost Point, Journal of Heat Transfer, Vol. 124, No. 5, pp. 864–874, 2002.
   Web of Science ®Google Scholar
• D. Gorenflo, D. Kenning (2010), Pool Boiling, in VDI Heat Atlas, (English Version) (pp 757–793), Gesellschaft, VDI, Springer Berlin Heidelberg, Heidelberg, Germany.
   Google Scholar