137
Views
0
CrossRef citations to date
0
Altmetric
Research Articles

Optimization of nutrients removal from synthetic greywater by low-cost activated carbon: application of Taguchi method and response surface methodology

ORCID Icon, ORCID Icon & ORCID Icon
Pages 506-515 | Received 04 Feb 2020, Accepted 08 Mar 2021, Published online: 02 May 2021

References

  • Ab Ghani, Z., Yusoff, M.S., and Andas, J., 2016. Development of activated carbon from banana pseudo-stem via single step of chemical activation. AIP Conference Proceedings, 19 October 2016. Penang: Malaysia.
  • Abdel Salam, O.E., Reiad, N.A., and ElShafei, M.M., 2011. A study of the removal characteristics of heavy metals from wastewater by low-cost adsorbents. Journal of advanced research, 2 (4), 297–303.
  • Allwar, A., Febriyantr, H.Z., and Yuliantari, R., 2017. Preparation and characterization of hydrothermal activated carbon from banana empty fruit bunch with ZnCl2 activation for removal of phenol in aqueous solution. Asian journal of applied sciences, 11 (1), 20–28.
  • Asghar, A., Raman, A.A.A., and Daud, W.M.A.W., 2014. A comparison of central composite design and Taguchi method for optimizing Fenton process. The scientific world journal, 2014, 869120.
  • Bach, L.G., et al., 2017. Optimization of the fabrication of banana peel-derived activated carbon and application for Cu2+ removal. Journal of materials science and surface engineering, 5 (5), 622–626.
  • Bhatnagar, A., Sillanpää, M., and Witek-Krowiak, A., 2015. Agricultural waste peels as versatile biomass for water purification - A review. Chemical engineering journal, 270, 244–271.
  • Braga, J.K., and Varesche, M.B.A., 2014. Commercial laundry water characterisation. American journal of analytical chemistry, 05 (01), 8–16.
  • Danish, M., et al., 2018. Use of banana trunk waste as activated carbon in scavenging methylene blue dye: Kinetic, thermodynamic, and isotherm studies. Bioresource technology reports, 3, 127–137.
  • Daniyan, I.A., Mpofu, K., and Adeodu, A.O., 2019. Optimization of welding parameters using Taguchi and response surface methodology for rail car bracket assembly. The international journal of advanced manufacturing technology, 100 (9-12), 2221–2228.
  • Duan, X., et al., 2011. Process optimization for the preparation of activated carbon from Jatropha hull using response surface methodology. Energy sources, part A: recovery, utilization and environmental effects, 33 (21), 2005–2017.
  • Duan, X.L., et al., 2019. Removal of elemental mercury using large surface area micro-porous corn cob activated carbon by zinc chloride activation. Fuel, 239, 830–840.
  • Dwumfour-Asare, B., et al., 2017. Greywater characterization and handling practices among urban households in Ghana: The case of three communities in Kumasi Metropolis. Water science and technology : a journal of the international association on water pollution research, 76 (3-4), 813–822.
  • Fatoba, O., et al., 2017. Modelling and optimization of laser alloyed AISI 422 stainless steel using Taguchi approach and response surface model (RSM). Current journal of applied science and technology, 23 (3), 1–16.
  • Ferreira, S.L.C., et al., 2007. Box-Behnken design: An alternative for the optimization of analytical methods. Analytica chimica acta, 597 (2), 179–186.
  • Ghani, Z.A., et al., 2017. Optimization of preparation conditions for activated carbon from banana pseudo-stem using response surface methodology on removal of color and COD from landfill leachate. Waste management (New York, N.Y.), 62, 177–187.
  • Gmucová, K., et al., 2011. Carbonized waste for the cut-down of environmental pollution with heavy metals. Physics of particles and nuclei letters, 8 (4), 405–411.
  • Huo, J., and Lua, A.C., 2000. Textural characterization of activated carbons prepared from oil-palm stones pre-treated with various impregnating agents. Journal of porous materials, 7, 491–497.
  • Hussein, M.Z., et al., 2001. Oil palm trunk as a raw material for activated carbon production. Journal of porous materials, 8 (4), 327–334.
  • Ismail, W.M.Z.W., et al., 2020. Application of Taguchi method for the optimization of Fe2+ removal from contaminated synthetic groundwater using a rotating packed bed contactor. Water and environment journal, 34 (1), 57–65.
  • Jabornig, S., and Favero, E., 2013. Single household greywater treatment with a moving bed biofilm membrane reactor (MBBMR). Journal of membrane science, 446, 277–285.
  • Katukiza, A.Y., et al., 2015. Grey water characterisation and pollutant loads in an urban slum. International journal of environmental science and technology, 12 (2), 423–436.
  • Khalifa, A.E., and Lawal, D.U., 2016. Application of response surface and Taguchi optimization techniques to air gap membrane distillation for water desalination—A comparative study. Desalination and water treatment, 57 (59), 28513–28530.
  • Kong, H., (2017). Synthesis and characterization of surface modified banana trunk as adsorbent for benzene removal from aqueous solution. PhD Thesis. Universiti Teknologi Malaysia. Johor: Malaysia.
  • Kulabako, N.R., Ssonko, N.K.M., and Kinobe, J., 2011. Greywater characteristics and reuse in tower gardens in peri-urban areas – experiences of Kawaala, Kampala, Uganda. The open environmental engineering journal, 4, 147–154.
  • Kumar, P., and Jena, H.M., 2016. Preparation and characterization of high surface area activated carbonfrom Fox nut (Euryale ferox) shell by chemical activation with H3PO4. Results in physics, 6, 651–658.
  • Leal, L.H., et al., 2007. Characterisation and biological treatment of greywater. Water science and technology, 56, 193–200.
  • Leonard, M., et al., 2016. Field study of the composition of greywater and comparison of microbiological indicators of water quality in on-site systems. Environmental monitoring and assessment, 188 (8), 475.
  • Lua, A.C., and Yang, T., 2005. Characteristics of activated carbon prepared from pistachio-nut shell by zinc chloride activation under nitrogen and vacuum conditions. Journal of colloid and interface science, 290 (2), 505–513.
  • Madhu, R., Veeramani, V., and Chen, S.M., 2014. Heteroatom-enriched and renewable banana-stem-derived porous carbon for the electrochemical determination of nitrite in various water samples. Scientific reports, 4, 4679.
  • Makeswari, M., and Santhi, T., 2013. Optimization of preparation of activated carbon from Ricinus communis leaves by microwave-Assisted zinc chloride chemical activation: Competitive adsorption of Ni 2+ ions from aqueous solution. Journal of chemistry, 2013, 1–12.
  • Misran, E., et al., 2018. Removal efficiency of methylene blue using activated carbon from waste banana stem: Study on pH influence. IOP conference series: earth and environmental science, 122 (1), 012085.
  • Molina-Sabio, M., and Rodriguez-Reinoso, F., 2004. Role of chemical activation in the development of carbon porosity. Colloids and surfaces A: physicochemical and engineering aspects, 241 (1-3), 15–25.
  • Mopoung, S., and Udeye, V., 2017. Characterization and evaluation of charcoal briquettes using banana peel and banana bunch waste for household heating. American journal of engineering and applied sciences, 10 (2), 353–365.
  • Morel, A., and Diener, S., 2006. Greywater Management in Low and Middle-Income Countries: Review of different treatment systems for households or neighbourhoods. Swiss Federal Institute of Aquatic Science and Technology (Eawag). Dübendorf: Switzerland.
  • Prakash Menon, M., et al., 2017. Extraction and modification of cellulose nanofibers derived from biomass for environmental application. RSC advances, 7 (68), 42750–42773.
  • Murray, P.M., et al., 2016. The application of design of experiments (DoE) reaction optimisation and solvent selection in the development of new synthetic chemistry. Organic and biomolecular chemistry, 14 (8), 2373–2384.
  • Azmi, N.B., et al., 2015. Stabilized land fi ll leachate treatment by sugarcane bagasse derived activated carbon for removal of color, COD and NH3 -N – Optimization of preparation conditions by RSM. Journal of environmental chemical engineering, 3 (2), 1287–1294.
  • Praveena, S.M., Rashid, U., and Rashid, S.A., 2020. Application of activated carbon from banana stem waste for removal of heavy metal ions in greywater using a Box- Behnken design approach. Environmental technology, 41 (25), 3363–3374.
  • Qomariyah, S., et al., 2017. Use of macrophyte plants, sand & gravel materials in constructed wetlands for greywater treatment. IOP conference series: materials science and engineering, 176, 012018.
  • Quynh, B.T.P., et al., 2017. Response surface methodology approach for optimization of Cu 2+, Ni 2+ and Pb 2+ adsorption using KOH-activated carbon from banana peel. Surfaces and interfaces, 6, 209–217.
  • Rwayhah, Y.M.N., Hassan, M.L., and Shehata, M.R., 2017. Nanoporous activated carbon from olive stones wastes. Journal of scientific and industrial research, 76, 725–732.
  • Saleem, J., et al., 2019. Production and applications of activated carbons as adsorbents from olive stones. Biomass conversion and biorefinery, 9 (4), 775–802.
  • Senthilkumar, T., Chattopadhyay, S.K., and Miranda, L.R., 2017. Optimization of activated carbon preparation from pomegranate peel (Punica granatum Peel) Using RSM. Chemical engineering communications, 204 (2), 238–248.
  • Singh, T.S., and Verma, T.N., 2019. Taguchi design approach for extraction of methyl ester from waste cookingoil using synthesized CaO as heterogeneous catalyst: Response surfacemethodology optimization. Energy conversion and management, 182, 383–397.
  • Song, H., et al., 2019. Experimental study on the cutting force during laser-assisted machining of fused silica based on the Taguchi method and response surface methodology. Journal of manufacturing processes, 38, 9–20.
  • Syed-Hassan, S.S.A., and Zaini, M.S.M., 2016. Optimization of the preparation of activated carbon from palm kernel shell for methane adsorption using Taguchi orthogonal array design. Korean journal of chemical engineering, 33 (8), 2502–2512.
  • Wang, X., et al., 2015. Optimization of ultrasonic-assisted alkaline extraction of polysaccharides from Phellodendron amurense Rupr. pollen using response surface methodology and its structure features. RSC advances, 5 (129), 106800–106808.
  • Yuan, Z., et al., 2018. Applied Surface Science Box-Behnken design approach towards optimization of activated carbon synthesized by co-pyrolysis of waste polyester textiles and MgCl2. Applied surface science, 427, 340–348.
  • Zawawi, N.M., et al., 2017. Characterization of activated carbon using chemical activation via microwave ultrasonic system. Malaysian journal of analytical sciences, 21, 159–165.
  • Zeng, Z., et al., 2013. Sorption of ammonium and phosphate from aqueous solution by biochar derived from phytoremediation plants. Journal of Zhejiang university. science. B, 14 (12), 1152–1161.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.