References
- Acgih, T. (2007). BEIs. Threshold limits values for chemical substances and physical agents. Biological exposure indices. ACGIH.
- Akbar-Khanzadeh, F., & Brillhart, R. L. (2001). Respirable crystalline silica dust exposure during concrete finishing (grinding) using hand-held grinders in the construction industry. The Annals of Occupational Hygiene, 46(3), 341–346.
- AREC. (1999). Comments of the Asphalt Roofing Environmental Council on NIOSH’s September 1998 hazard review document: Health effects of the occupational exposure to asphalt. The Asphalt Institute, Asphalt Roofing Manufacturers’ Association, National Roofing Contractors Association, Roof Coating Manufacturers’ Association.
- Armenakis, A. A., Harris, S. G., & Mossholder, K. W. (1993). Creating readiness for organizational change. Human Relations, 46, 681–703.
- Brown, S. A., Massey, A. P., Montoya-Weiss, M. M., & Burkman, J. R. (2002). Do I really have to? User acceptance of mandated technology. European Journal of Information Systems, 11(4), 283. https://doi.org/10.1057/palgrave.ejis.3000438
- Carpiano, R. M., & Daley, D. M. (2006). A guide and glossary on postpositivist theory building for population health. Journal of Epidemiology & Community Health, 60(7), 564–570. https://doi.org/10.1136/jech.2004.031534
- Chau, P. Y. K. (1996). An empirical assessment of a modified technology acceptance model. Journal of Management Information Systems, 13(2), 185. https://doi.org/10.1080/07421222.1996.11518128
- Croteau, G. A. (2000). The effect of local exhaust ventilation controls on dust exposures during masonry activities [ MS Thesis]. University ofWashington.
- Croteau, G. A., Guffey, S. E., Flanagan, M. E., & Seixas, N. S. (2002). The effect of local exhaust ventilation controls on dust exposures during concrete cutting and grinding activities. American Industrial Hygiene Association Journal, 63, 458–467.
- CS UNITEC. (2003). Air Rotary Hammer Drill 13 January. Retrieved January 13, 2003, from http://www.csunitec.com/rotary/airrotary.html.
- Davis, F. D. (1989). Perceived usefulness, perceived ease of use, and user acceptance of information technology. MIS Quarterly, 13(3), 319. https://doi.org/10.2307/249008
- Earp, J. A., & Ennett, S. T. (1991, June). Conceptual models for health education research and practice. Health Education Research, 6(2), 163–171. PMID: 10148689. https://doi.org/10.1093/her/6.2.163
- Engholm, G., Englund, A., & Linder, B. (1991). Mortality and cancer incidence in Swedish road paving asphalt workers and roofers. European Asphalt, 2, 23–32.
- Hardison, D., & Hallowell, M. (2019). Construction hazard prevention through design: Review of perspectives, evidence, and future objective research agenda. Safety Science, 120, 517–526. https://doi.org/10.1016/j.ssci.2019.08.001
- Heitbrink, W. A., & Watkins, D. S. (2001). The effect of exhaust flow rate upon the respirable dust emissions for tuck-pointing operations: In-Depth Study Report: Control Technology for Crystalline Silica Exposures in Construction ( ECTB No. 247-18). U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health.
- Hochbaum, G. M. (1958). Public participation in medical screening programs: A sociopsychological study. PHS publication no. 572. U.S. Government Printing Office.
- Holden, R. J., & Karsh, B.-T. (2010). The technology acceptance model: Its past and its future in health care. Journal of Biomedical Informatics, 43(1), 159–172. https://doi.org/10.1016/j.jbi.2009.07.002
- Howard, J. (2008). Prevention through Design: Introduction. Journal of Safety Research, 39, 113.
- Hu, P. J., Chau, P. Y. K., Sheng, O. R. L., & Tam, K. Y. (1999). Examining the technology acceptance model using physician acceptance of telemedicine technology. Journal of Management Information Systems, 16(2), 91. https://doi.org/10.1080/07421222.1999.11518247
- IARC. (2003). IARC monographs on the evaluation of the carcinogenic risk of chemicals to humans: Polynuclear aromatic compounds. Part 4. Bitumens, coal tars, derived products, shale-oils, and soots (Vol 35, pp. 39–81). World Health Organization, International Agency for Research on Cancer.
- Knutsson, A., Damber, L., & Järvholm, B. (2000). Cancers in concrete workers: Results of a cohort study of 33 668 workers. Occupational and Environmental Medicine, 57(4), 264–267.
- Koebel, C. T. (1999). Sustaining sustainability: Innovation in housing and the built environment. Journal of Urban Technology, 6(3), 75–94. https://doi.org/10.1080/10630739983597
- Koebel, C. T. (2003). Innovation in Homebuilding and the Future of Housing. Journal of the American Planning Association, 74(1), 45–58.
- Koebel, C. T. (2008). Innovation in homebuilding and the future of housing. Journal of the American Planning Association, 74(1), 45–58. https://doi.org/10.1080/01944360701768991
- Krippendorff, K. (2004). Content analysis an introduction to its methodology. SagePublications. Inc.
- Linch, K. D. (2002). Respirable concrete dust—Silicosis hazard in the construction industry. Applied Occupational and Environmental Hygiene, 17(3), 209–221.
- Lyons, J. J., Sime, P. J., Ward, D., Watson, T., Abraham, J. L., Evans, R., Budev, M., Costas, K., & Beckett, W. S. (2007). A breathless builder. Breathe, 3, 386–390.
- Manseau, A., & Shields, R. (2005). Building tomorrow: Innovation in construction and engineering. Ashgate.
- McFall, T., Booth, G. M., Lee, M. L., Tominaga, Y., Pratap, R., Tedjamulia, M., & Castle, R. N. (1984). Mutagenic activity of methyl-substituted tri- and tetracyclic aromatic sulfur heterocyclic. Mutation Research, 135, 97–103.
- National Institute for Occupational Safety and Health. (2000). Health hazard evaluation: Control of drywall dust. Applied Occupational and Environmental Hygiene, 15(11), 820–821. https://doi.org/10.1080/10473220050175689
- NIOSH (1999). Control technology and exposure assessment for occupational exposure cystalline silica: Case 04 – a concrete finishing operation ( Report # ECTB 233-104c). National Institute for Occupational Safety and Health.
- NIOSH. (2001). Health effects of occupational exposure to asphalt. National Institute for Occupational Safety and Health Cincinnati, OH: NIOSH—Publications Dissemination.
- Norseth, T., Waage, J., & Dale, I. (1991). Acute effects and exposure to organic compounds in road maintenance workers exposed to asphalt. American Journal Industrial Medicine, 20, 737–744.
- Occupational Safety and Health Administration. (2009). Controlling Silica Exposures in Construction (Report No. 3362-04.2009). U.S. Department of Labor, OSHA Publication.
- Occupational Safety and Health Administration. (2017): Respirable crystalline silica. Code of Federal Regulations 1926.1153.
- Partanen, T., & Boffetta, P. (1994). “Cancer risk in asphalt workers and roofers: Review and meta-analysis of epidemiologic studies. American Journal of Industrial Medicine, 26, 721–740.
- Rogers, E. M. (2004). A prospective and retrospective look at the diffusion model. Journal of Health Communication: International Perspectives, 9(sup1), 13–19. https://doi.org/10.1080/10810730490271449
- Rosenstock, I. (1960). What research in motivation suggests for public health. American Journal of Public Health, 50(3_Pt_1), 295–301. https://doi.org/10.2105/AJPH.50.3_Pt_1.295
- Rosenstock, I. M. (1966). Historical origins of the health belief model. Health Education Monographs, 2(4), 328–335. https://doi.org/10.1177/109019817400200403
- Schulte, P. A., Rinehart, R., Okun, A., Geraci, C. L., & Heidel, D. S. (2008). National Prevention through Design (PtD) Initiative. Journal of Safety Research, 39, 115–121.
- Shepherd, S., Woskie, S. R., Holcroft, C., & Ellenbecker, M. (2009). Reducing Silica and Dust Exposures in Construction during Use of Powered Concrete-Cutting Hand Tools: Efficacy of Local Exhaust Ventilation on Hammer Drills. Journal of Occupational and Environmental Hygiene, 6(1), 42–51.
- Simcox, N., Lofgren, D., Leons, J., & Camp, J. (1999). Case Studies: Silica Exposure During Granite Countertop Fabrication. Applied Occupational And Environmental Hygiene, 14(9), 577–582.
- Thorpe, A., Ritchie, A. S., Gibson, M. J., & Brown, R. C. (1999). Measurements of the effectiveness of dust control on cut-off saws used in the construction industry. Annals of Occupational Health, 43(7), 443–456.
- Toole, T. M. (1998). Uncertainty and home builders’ adoption of technological innovations. Journal of Construction Engineering and Management, 124(4), 323–332. https://doi.org/10.1061/(ASCE)0733-9364(1998)124:4(323)
- Toole, T. M., & Gambatese, J. (2008). The trajectories of prevention through design in construction. Journal of Safety Research, 39(2), 225–230.
- Weidman, J., Dickerson, D. E., & Koebel, C. T. (2015a). Intervention to improve purchasing decision-maker perceptions of ventilated tools. Journal of Construction Engineering and Management, 141(6), 04015007.
- Weidman, J. E., Young-Corbett, D. E., & Koebel, C. T. (2015b). Prevention through Design (PtD): A macro-ergonomic conceptual approach to risk reduction. Institute of Industrial Engineers Transactions on Occupational Ergonomics and Human Factors, 3(1), 24–36. https://doi.org/10.1080/21577323.2014.918911
- Westbrook, T. (1999). Managing fugitive dust. Presentation made at the Pollution Prevention Seminar for the Mining and Mineral Industries, Options for Reducing Dust Emissions, 1999, September 16, Mesa, Arizona.
- Yi, M. Y., Jackson, J. D., Park, J. S., & Probst, J. C. (2006). Understanding information technology acceptance by individual professionals: Toward an integrative view. Information & Management, 43(3), 350–363. https://doi.org/10.1016/j.im.2005.08.006
- Young-Corbett, D. E. (2013). Prevention through design: Eliminating occupational and environmental risk through design of equipment, work, and systems. In A. Badiru, Ed., (2nd ed.,) Chapter in: The handbook of industrial and systems engineering (pp. 1001–1014). Taylor and Francis, CRC Press. https://doi.org/10.1201/b15964-54
- Young-Corbett, D. E., & Kleiner, B. M. (2008). Drywall finishing industry: Macro-ergonomic evaluation and intervention design. Proceedings of Human Factors in Organizational Desing and Management (ODAM) International Symposium, Sao Paulo, Brasil.
- Young-Corbett, D. E., & Nussbaum, M. A. (2009). Dust control technology usage patterns in the drywall finishing industry. Journal of Occupational and Environmental Hygiene, 6(6), 315–323. https://doi.org/10.1080/15459620902836815
- Zalk, D. (2002, May 20–25). Exposure assessment strategy for the reduction of airborne silica during jackhammering activities. American Industrial Hygiene Conference and Exposition, Orlando, FL.