References
- Borrega, M., and P. Kärenlampi. 2010. Hygroscopicity of heat-treated Norway spruce (Picea abies) wood. European Journal of Wood Products 68 (2):233–35. doi:https://doi.org/10.1007/s00107-009-0371-8.
- Cavalli, A., D. Cibecchini, M. Togni, and H. S. Sousa. 2016. A review on the mechanical properties of aged wood and salvaged timber. Construction and Building Materials 114:681–87. doi:https://doi.org/10.1016/j.conbuildmat.2016.04.001.
- Cave, I. D. 1966. Theory of X-ray measurement of microfibril angle in wood. Forest Products Journal 16:37–42.
- Gong, M., and I. Smith. 2003. Effect of waveform and loading sequence on low-cycle compressive fatigue life of spruce. Journal of Materials in Civil Engineering 15 (1):93–99. doi:https://doi.org/10.1061/(ASCE)0899-1561(2003)15:1(93).
- Hirashima, Y., M. Sugihara, Y. Sasaki, K. Ando, and M. Yamasaki. 2004a. Strength properties of aged wood I: Tensile strength properties of aged keyaki and akamatsu woods. Mokuzai Gakkaishi 50:301–09 (in Japanese).
- Hirashima, Y., M. Sugihara, Y. Sasaki, K. Ando, and M. Yamasaki. 2004b. Strength properties of aged wood II: Compressive strength properties of aged keyaki and akamatsu woods. Mokuzai Gakkaishi 50:368–75 (in Japanese).
- Hoffmeyer, P., and J. D. Sørensen. 2007. Duration of load revisited. Wood Science and Technology 41 (8):687–711. doi:https://doi.org/10.1007/s00226-007-0154-5.
- Kohara, J. 1952. Studies on the durability of wood I: Mechanical properties of old timbers. (Horyuji Temple construction timbers Chamaecyparis obtusa ENDLICHER). Scientific Reports of the Saikyo University 2:116–31. (in Japanese).
- Kohara, J. 1953. Studies on the durability of wood III: Mechanical properties of old timbers. Scientific Reports of the Saikyo University 4:98–109. (in Japanese).
- Kohara, J. 1954. Studies on the permanence of wood-VII The influence of age on the components of wood (Chamaecyparis obtusa ENDLICHER). Scientific Reports of the Saikyo University 6:175–82. (in Japanese).
- Kranitz, K. 2014. Effect of Natural Aging on Wood Doctoral thesis. University of West Hungary.
- Kubojima, Y., T. Okano, and M. Ohta. 2000. Bending strength and toughness of heat-treated wood. Journal of Wood Science 46 (1):8–15. doi:https://doi.org/10.1007/BF00779547.
- Lee, C., M. Yamasaki, T. Sugimoto, and Y. Sasaki. 2019. Synchrotron X-ray measurements of cellulose in wood cell wall layers of Pinus densiflora in the transmission and reflectance modes. Part 1: Results without loading. Holzforschung 73 (7):613–19. doi:https://doi.org/10.1515/hf-2018-0120.
- Madsen, B. 1992. Structural behavior of timber. North Vancouver, Canada: Timber Engineering Ltd.
- Matsuo, M., M. Yokoyama, K. Umemura, J. Sugiyama, S. Kawai, J. Gril, S. Kubodera, T. Mitsutani, H. Ozaki, M. Sakamoto, et al. 2011. Aging of wood: Analysis of color changes during natural aging and heat treatment. Holzforschung 65 (3):361–68. doi:https://doi.org/10.1515/hf.2011.040.
- Meylan, B. A. 1967. Measurement of microfibril angle by X-ray diffraction. Forest Products Journal 17:51–58.
- Montero, C., B. Clair, T. Alméras, A. Lee, and J. Gril. 2012. Relationship between wood elastic strain under bending and cellulose crystal strain. Composites Science and Technology 72 (2):175–81. doi:https://doi.org/10.1016/j.compscitech.2011.10.014.
- Nakai, T., H. Yamamoto, and T. Nakao. 2005. The relationship between macroscopic strain and crystal lattice strain in wood under uniaxial stress in the fiber direction. Journal of Wood Science 51 (2):193–94. doi:https://doi.org/10.1007/s10086-005-0697-8.
- Nakai, T., H. Yamamoto, T. Nakao, and M. Hamatake. 2006. Mechanical behavior of the crystal lattice of natural cellulose in wood under repeated uniaxial tension stress in the fiber wood. Wood Science and Technology 40 (8):683–95. doi:https://doi.org/10.1007/s00226-006-0095-4.
- Obataya, E., S. Shibutani, K. Hanata, and S. Doi. 2006. Effects of high temperature kiln drying on the practical performances of Japanese cedar wood (Cryptomeria japonica) II: Changes in mechanical properties due to heating. Journal of Wood Science 52 (2):111–14. doi:https://doi.org/10.1007/s10086-005-0748-1.
- Ogawa, K., K. Shimizu, M. Yamasaki, and Y. Sasaki. 2017. Fatigue behavior of Japanese cypress (Chamaecyparis obtusa) under repeated compression loading tests perpendicular to the grain. Holzforschung 71 (6):499–504. doi:https://doi.org/10.1515/hf-2016-0227.
- Peura, M., I. Grotkopp, H. Lemke, A. Vikkula, J. Laine, M. Müller, and R. Serimaa. 2006. Negative poisson ratio crystalline cellulose in kraft cooked Norway spruce. Biomacromolecules 7 (5):1521–28. doi:https://doi.org/10.1021/bm050722o.
- Peura, M., K. Kölln, I. Grotkopp, P. Saranpää, M. Müller, and R. Serimaa. 2007. The effect of axial strain on crystalline cellulose in Norway spruce. Wood Science and Technology 41 (7):565–83. doi:https://doi.org/10.1007/s00226-007-0141-x.
- Sasaki, Y., A. Oya, and M. Yamasaki. 2014. Energetic investigation of the fatigue of wood. Holzforschung 68 (7):843–48. doi:https://doi.org/10.1515/hf-2013-0147.
- Sobue, N., N. Hirai, and I. Asano. 1971. On the measurement of strain distribution in wood under the axial tension force by X-ray diffraction. Journal of the Society of Material Science, Japan 20:1188–93 (in Japanese).
- Tanaka, F., T. Takaki, K. Okamura, and T. Koshima. 1980. Orientation distribution of cellulose crystallites in woody plants. Part I.: Pole-figures and orientation functions of cellulose crystallites in opposite wood of Pinus densiflora. Wood Research: Bulletin of the Wood Research Institute Kyoto University 66:17–22.
- Watanabe, A., Y. Sasaki, and M. Yamasaki. 2014. Bending fatigue of wood: Strain energy-based failure criterion and fatigue life prediction. Wood and Fiber Science 46:216–27.
- Wood, L. W. 1951. Relation of strength of wood to duration of stress. Report No. 1916, U.S. Forest Products Laboratory.
- Yildiz, S., E. D. Gezer, and U. C. Yildiz. 2006. Mechanical and chemical behavior of spruce wood modified by heat. Building and Environment 41 (12):1762–66. doi:https://doi.org/10.1016/j.buildenv.2005.07.017.
- Yokoyama, M., J. Gril, M. Matsuo, H. Yano, J. Sugiyama, B. Clair, S. Kubodera, T. Mitsutani, M. Sakamoto, H. Ozaki, et al. 2009. Mechanical characteristics of aged Hinoki wood from Japanese historical buildings. Comptes Rendus Physique 10 (7):601–11. doi:https://doi.org/10.1016/j.crhy.2009.08.009.
- Zeniya, N., E. Obataya, K. Endo, and M. Matsuo. 2019. Application of time–temperature–humidity superposition to the mass loss of wood through hygrothermally accelerated ageing at 95–140 °C and different relative humidity levels. SN Applied Sciences 1:3. doi:https://doi.org/10.1007/s42452-018-0009-8.