Wind-Induced Vibration of Traditional Chinese Citygate Buildings in the Ming-Qing Dynasties – A Case Study of the Nanjing Drum Tower

References

• Ahmad, S., and K. Kumar. 2001. Interference effects on wind loads on low-rise hip roof buildings. Engineering Structures 23 (12):1577–89. doi:10.1016/S0141-0296(01)00057-8.
   Web of Science ®Google Scholar
• Baetke, F., H. Werner, and H. Wengle. 1990. Numerical simulation of turbulent flow over surface-mounted obstacles with sharp edges and corners. Journal of Wind Engineering and Industrial Aerodynamics 35:129–47. doi:10.1016/0167-6105(90)90213-V.
   Web of Science ®Google Scholar
• Baskaran, A., and A. Kashef. 1996. Investigation of air flow around buildings using computational fluid dynamics techniques. Engineering Structures 18 (11):861–75. doi:10.1016/0141-0296(95)00154-9.
   Web of Science ®Google Scholar
• Baskaran, A., and T. Stathopoulos. 1989. Computational evaluation of wind effects on buildings. Building and Environment 24 (4):325–33. doi:10.1016/0360-1323(89)90027-9.
   Web of Science ®Google Scholar
• Baskaran, A., and T. Stathopoulos. 1992. Influence of computational parameters on the evaluation of wind effects on the building envelope. Building and Environment 27 (1):39–49. doi:10.1016/0360-1323(92)90006-B.
   Web of Science ®Google Scholar
• Blocken, B. 2018. LES over RANS in building simulation for outdoor and indoor applications: A foregone conclusion? Building Simulation 11 (5):821–70. doi:10.1007/s12273-018-0459-3.
   Web of Science ®Google Scholar
• Blocken, B., and J. Carmeliet. 2007a. On the errors associated with the use of hourly data in wind-driven rain calculations on building facades. Atmospheric Environment 41 (11):2335–43. doi:10.1016/j.atmosenv.2006.11.014.
   Web of Science ®Google Scholar
• Blocken, B., and J. Carmeliet. 2007b. Validation of CFD simulations of wind-driven rain on a low-rise building facade. Building and Environment 42 (7):2530–48. doi:10.1016/j.buildenv.2006.07.032.
   Web of Science ®Google Scholar
• Blocken, B., T. Stathopoulos, and J. Carmeliet. 2007. CFD simulation of the atmospheric boundary layer: Wall function problems. Atmospheric Environment 41 (2):238–52. doi:10.1016/j.atmosenv.2006.08.019.
   Web of Science ®Google Scholar
• Case, J., P. Sarkar, and S. Sritharan. 2014. Effect of low-rise building geometry on tornado-induced loads. Journal of Wind Engineering and Industrial Aerodynamics 133:124–34. doi:10.1016/j.jweia.2014.02.001.
   Web of Science ®Google Scholar
• Chun, Q., H. Jin, Y. Dong, Y. Hua, and Y. Han. 2020. Research on mechanical properties of Dingtougong mortise-tenon joints of Chinese traditional hall-style timber buildings built in the Song and Yuan dynasties. International Journal of Architectural Heritage 14 (5):729–50. doi:10.1080/15583058.2019.1568613.
   Web of Science ®Google Scholar
• Chun, Q., J. Pan, and J. Wang. 2016. Mechanical properties of tou mortise-tenon Joints of the traditional timber buildings in the south Yangtze river regions. Journal of Southwest Jiaotong University 51 (5):862–69.
   Google Scholar
• Chun, Q., W. Lv, J. Wang, and J. Pan. 2015. Mechanical properties of typical mortise-tenon joints of post and lintel construction and column and tie construction of timber buildings in Jiangsu Province and Zhejiang Province. Journal of Southeast University (Natural Science Edition) 45 (1):151–58.
   Google Scholar
• Chun, Q., and Y. Han. 2016. Mechanical properties of monodirectional Gutou mortise - tenon joints of the traditional timber buildings in the Yangtze River region. Journal of Southeast University (English Edition) 32 (4):457–63.
   Google Scholar
• Chun, Q., Z. Meng, and Y. Han. 2017. Research on mechanical properties of main joints of Chinese traditional timber buildings with the type of post-and-lintel construction. International Journal of Architectural Heritage 11 (2):247–60. doi:10.1080/15583058.2016.1204487.
   Web of Science ®Google Scholar
• Crisafulli, F. J., and A. J. Carr. 2007. Proposed macro-model for the analysis of infilled frame structures. Bulletin of the New Zealand Society for Earthquake Engineering 40 (2):69–77. doi:10.5459/bnzsee.40.2.69-77.
   Google Scholar
• D’Altri, A. M. 2019. Modeling strategies for the computational analysis of unreinforced masonry structures: Review and classification. Archives of Computational Methods in Engineering. doi:10.1007/s11831-019-09351-x.
   Web of Science ®Google Scholar
• Doudak, G., G. McClure, I. Smith, L. Hu, and T. Stathopoulos. 2005. Monitoring structural response of a wooden light-frame industrial shed building to environmental loads. Journal of Structural Engineering 131 (5):794–805. doi:10.1061/(ASCE)0733-9445(2005)131:5(794).
   Web of Science ®Google Scholar
• Du, Y., C. M. Mak, and Z. Ai. 2018. Modelling of pedestrian level wind environment on a high-quality mesh: A case study for the HKPolyU campus. Environmental Modelling and Software 103:105–19. doi:10.1016/j.envsoft.2018.02.016.
   Web of Science ®Google Scholar
• Eric Ho, T. C., D. Surry, and A. G. Davenport. 1990. The variability of low building wind loads due to surrounding obstructions. Journal of Wind Engineering and Industrial Aerodynamics 36: 161–70. doi:10.1016/0167-6105(90)90301-R.
   Google Scholar
• Franke, J., A. Hellsten, H. Schlünzen, and B. Carissimo. 2007. Best practice guideline for the CFD simulation of flows in the urban environment. COST Action 732:51.
   Google Scholar
• Franke, J., A. Hellsten, H. Schlünzen, and B. Carissimo. 2011. The COST 732 best practice guideline for CFD simulation of flows in the urban environment: A summary. International Journal of Environment and Pollution 44 (1/2/3/4):419–27. doi:10.1504/IJEP.2011.038443.
   Web of Science ®Google Scholar
• Gavanski, E., B. Kordi, G. A. Kopp, and P. J. Vickery. 2013. Wind loads on roof sheathing of houses. Journal of Wind Engineering and Industrial Aerodynamics 114:106–21. doi:10.1016/j.jweia.2012.12.011.
   Web of Science ®Google Scholar
• Gu, M., W. Yang, P. Huang, and P. Luo. 2006. Wind tunnel test and numerical simulation on TTU building model. Journal of Tongji University (Natural Science) 34:12.
   Google Scholar
• Guo, H. 2005. Official woodwork of architecture in the Ming Dynasty. Nanjing: Southeast University Press.
   Google Scholar
• Gupta, R. 2005. System behaviour of wood truss assemblies. Progress in Structural Engineering and Materials 7 (4):183–93. doi:10.1002/pse.203.
   Google Scholar
• Gupta, R., and P. Limkatanyoo. 2008. Practical approach to designing wood roof truss assemblies. Practice Periodical on Structural Design and Construction 13 (3):135–46. doi:10.1061/(ASCE)1084-0680(2008)13:3(135).
   Google Scholar
• Hargreaves, D. M., and N. G. Wright. 2007. On the use of the k–ε model in commercial CFD software to model the neutral atmospheric boundary layer. Journal of Wind Engineering and Industrial Aerodynamics 95 (5):355–69. doi:10.1016/j.jweia.2006.08.002.
   Web of Science ®Google Scholar
• Hooff, T., and B. Blocken. 2010. Coupled urban wind flow and indoor natural ventilation modelling on a high-resolution grid: A case study for the Amsterdam ArenA stadium. Environmental Modelling and Software 25 (1):51–65. doi:10.1016/j.envsoft.2009.07.008.
   Web of Science ®Google Scholar
• Levitan, M. L., K. C. Mehta, W. P. Vann, and J. D. Holmes. 1991. Field measurements of pressures on the Texas tech building. Journal of Wind Engineering and Industrial Aerodynamics 38 (2–3):227–34. doi:10.1016/0167-6105(91)90043-V.
   Web of Science ®Google Scholar
• Levitana, M. L. 1992. Texas tech field experiments for wind loads part II: Meteorological instrumentation and terrain parameters.Journal of Wind Engineering and Industrial Aerodynamics(41–44). 1577–88. doi:10.1016/0167-6105(92)90373-I.
   Google Scholar
• Levitana, M. L., and K. C. Mehtab. 1992. Texas tech field experiments for wind loads part 1: Building and pressure measuring system. Journal of Wind Engineering and Industrial Aerodynamics (41–44). 1565–76. doi:10.1016/0167-6105(92)90372-H.
   Google Scholar
• Liang, S. C. 1934. Principle for construction techniques in the qing dynasty. Beijing: Society for the study of Chinese architecture.
   Google Scholar
• Luo, P. 2004. Wind tunnel test on TTU building model. China: Tongji University.
   Google Scholar
• Lu, W., and X. Lv. 2004. Study on the mode selection in the modal pushover analysis. Earthquake Engineering and Engineering Vibration 06:32–38.
   Google Scholar
• Martin, K. G., R. Gupta, D. O. Prevatt, P. L. Datin, and J. W. van de Lindt. 2011. Modeling system effects and structural load paths in a wood-framed structure. Journal of Architectural Engineering 17 (4):134–43. doi:10.1061/(ASCE)AE.1943-5568.0000045.
   Google Scholar
• Meng, Z. 2009. Analysis and assessment of the vibration responds traffic-induced Xi’an bell tower. China: Xi’an University of Architecure&Technology.
   Google Scholar
• MOHURD GB500032011. 2011. Code for design of masonry structures. Beijing: China Association for Engineering Construction Standardization.
   Google Scholar
• MOHURD GB500052017. 2017. Code for design of timber structures. Beijing: China Association for Engineering Construction Standardization.
   Google Scholar
• MOHURD GB500092012. 2012. Load code for the design of building structure. Beijing: China Association for Engineering Construction Standardization.
   Google Scholar
• Mou, B., B.-J. He, D.-X. Zhao, and K. Chau. 2017. Numerical simulation of the effects of building dimensional variation on wind pressure distribution. Engineering Applications of Computational Fluid Mechanics 11 (1):293–309. doi:10.1080/19942060.2017.1281845.
   Web of Science ®Google Scholar
• Murakami, S. 1990a. Computational wind engineering. Journal of Wind Engineering and Industrial Aerodynamics 36: 517–38. doi:10.1016/0167-6105(90)90335-A.
   Google Scholar
• Murakami, S. 1990b. Numerical simulation of turbulent flowfield around cubic model current status and applications of model and LES. Journal of Wind Engineering and Industrial Aerodynamics 33 (1–2):139–52. doi:10.1016/0167-6105(90)90030-G.
   Web of Science ®Google Scholar
• Murakami, S. 1993. Comparison of various turbulence models applied to a bluff body. Journal of Wind Engineering and Industrial Aerodynamics 46–47:21–36. doi:10.1016/0167-6105(93)90112-2.
   Web of Science ®Google Scholar
• Murakami, S., and A. Mochida. 1988. 3-D numerical simulation of airflow around a cubic model by means of the k-ε model. Journal of Wind Engineering and Industrial Aerodynamics 31:283–303. doi:10.1016/0167-6105(88)90009-8.
   Google Scholar
• Ozmen, Y., E. Baydar, and J. P. A. J. van Beeck. 2016. Wind flow over the low-rise building models with gabled roofs having different pitch angles. Building and Environment 95:63–74. doi:10.1016/j.buildenv.2015.09.014.
   Web of Science ®Google Scholar
• Pan, F. 2014. Damage prediction of low-rise buildings under hurricane winds. PhD diss., Louisiana State University.
   Google Scholar
• Pan, F., C. S. Cai, W. Zhang, and B. Kong. 2014. Refined damage prediction of low-rise building envelope under high wind load. Wind and Structures 18 (6):669–91. doi:10.12989/WAS.2014.18.6.669.
   Web of Science ®Google Scholar
• Pazlar, T., and M. Kramar. 2015. Traditional timber structures in extreme weather conditions. International Journal of Architectural Heritage 9 (6):689–95. doi:10.1080/15583058.2015.1041195.
   Web of Science ®Google Scholar
• Pinelli, J.-P., E. Simiu, K. Gurley, C. Subramanian, L. Zhang, A. Cope, J. J. Filliben, and S. Hamid. 2004. Hurricane damage prediction model for residential structures. Journal of Structural Engineering 130 (11):1685–91. doi:10.1061/(ASCE)0733-9445(2004)130:11(1685).
   Web of Science ®Google Scholar
• Rajčić, V., A. Skender, and D. Damjanović. 2018. An innovative methodology of assessing the climate change impact on cultural heritage. International Journal of Architectural Heritage 12 (1):21–35. doi:10.1080/15583058.2017.1354094.
   Web of Science ®Google Scholar
• Ricci, M., L. Patruno, and S. De Miranda. 2017. Wind loads and structural response: Benchmarking LES on a low-rise building. Engineering Structures 144:26–42. doi:10.1016/j.engstruct.2017.04.027.
   Web of Science ®Google Scholar
• Richards, P. J., and R. P. Hoxey. 1993. Appropriate boundary conditions for computational wind engineering models using the k-ε turbulence model. In Computational wind engineering, ed. S. Murakami, Vol. 1, 145–53. Oxford: Elsevier. doi:10.1016/B978-0-444-81688-7.50018-8.
   Google Scholar
• Richards, P. J., and S. E. Norris. 2011. Appropriate boundary conditions for computational wind engineering models revisited. The Fifth International Symposium on Computational Wind Engineering 99 (4):257–66. doi:10.1016/j.jweia.2010.12.008.
   Google Scholar
• Rodrigues, H., H. Varum, and A. Costa. 2010. Simplified macro-model for infill masonry panels. Journal of Earthquake Engineering 14 (3):390–416. doi:10.1080/13632460903086044.
   Web of Science ®Google Scholar
• Schatzmann, M., and B. Leitl. 2011. Issues with validation of urban flow and dispersion CFD models. The Fifth International Symposium on Computational Wind Engineering 99 (4):169–86. doi:10.1016/j.jweia.2011.01.005.
   Google Scholar
• Singh, J., and A. K. Roy. 2019. Effects of roof slope and wind direction on wind pressure distribution on the roof of a square plan pyramidal low-rise building using CFD simulation. International Journal of Advanced Structural Engineering 11 (2):231–54. doi:10.1007/s40091-019-0227-3.
   Google Scholar
• Stern, F., R. V. Wilson, H. W. Coleman, and E. G. Paterson. 2001. Comprehensive approach to verification and validation of CFD simulations—part 1: Methodology and procedures. Journal of Fluids Engineering 123 (4):793–802. doi:10.1115/1.1412235.
   Web of Science ®Google Scholar
• Tamura, T., K. Nozawa, and K. Kondo. 2008. AIJ guide for numerical prediction of wind loads on buildings. Journal of Wind Engineering and Industrial Aerodynamics 96 (10–11):1974–84. doi:10.1016/j.jweia.2008.02.020.
   Web of Science ®Google Scholar
• Tao, J., D. Xiao, Q. Qin, X. Zhuo, J. Wang, H. Chen, and Q. Wang. 2020. Climate-adaptive design of historic villages and dwellings in a Typhoon-prone region in Southernmost mainland China. International Journal of Architectural Heritage 1–19. doi:10.1080/15583058.2020.1753262.
   Web of Science ®Google Scholar
• Tominaga, Y., A. Mochida, R. Yoshie, H. Kataoka, T. Nozu, M. Yoshikawa, and T. Shirasawa. 2008a. AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings. Journal of Wind Engineering and Industrial Aerodynamics 96(1011):1749–61. 4th International Symposium on Computational Wind Engineering (CWE2006). doi:10.1016/j.jweia.2008.02.058.
   Google Scholar
• Tominaga, Y., A. Mochida, R. Yoshie, H. Kataoka, T. Nozu, M. Yoshikawa, and T. Shirasawa. 2008b. AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings. Journal of Wind Engineering and Industrial Aerodynamics 96 (10–11):1749–61. doi:10.1016/j.jweia.2008.02.058.
   Web of Science ®Google Scholar
• Tominaga, Y., S. Akabayashi, T. Kitahara, and Y. Arinami. 2015. Air flow around isolated gable-roof buildings with different roof pitches: Wind tunnel experiments and CFD simulations. Building and Environment 84:204–13. doi:10.1016/j.buildenv.2014.11.012.
   Web of Science ®Google Scholar
• Yang, W., Y. Quan, X. Jin, Y. Tamura, and M. Gu. 2008. Influences of equilibrium atmosphere boundary layer and turbulence parameter on wind loads of low-rise buildings. Journal of Wind Engineering and Industrial Aerodyna 13. doi:10.1016/j.jweia.2008.02.014.
   Web of Science ®Google Scholar
• Yang, Y., M. Gu, S. Chen, and X. Jin. 2009. New inflow boundary conditions for modelling the neutral equilibrium atmospheric boundary layer in computational wind engineering. Journal of Wind Engineering and Industrial Aerodynamics 97 (2):88–95. doi:10.1016/j.jweia.2008.12.001.
   Web of Science ®Google Scholar
• Yao, C. Z. 1986. Principle for construction (Yingzaofayuan). Beijing: China architecture and building press.
   Google Scholar
• Zhang, X. T. 1985. Calculation of structural wind pressure and wind vibration. Shanghai: Tongji University Press.
   Google Scholar