Filling Process in Injection Mold: A Review

REFERENCES

• Han , K.-H. ; Im , Y.-T. Compressible flow analysis of filling and post-filling injection molding with phase-change effect . Composite Structures 1997 , 38 ( 1–4 ), 179 – 190 .
   Web of Science ®Google Scholar
• Holm , E.J. ; Petter , L.H. A unified finite element method model for the injection molding process . Computer Methods in Applied Mechanics and Engineering 1999 , 178 , 413 – 429 .
   Web of Science ®Google Scholar
• Kumar , A. ; Ghoshdastidar , P.S. ; Muju , M.K. Computer simulation of transport process during injection mold-filling and optimization of the molding conditions . Journal of Materials Processing Technology 2002 , 120 , 438 – 449 .
   Web of Science ®Google Scholar
• Courbebaisse , G. Numerical simulation of injection molding process and the pre-modeling concept . Computational Material Science 2005 , 34 , 397 – 405 .
   Web of Science ®Google Scholar
• Galantucci , L.M. ; Spina , R. Evaluation of filling conditions of injection molding by integrating numerical simulations and experimental tests . Journal of Materials Processing Technology 2003 , 141 , 266 – 275 .
   Web of Science ®Google Scholar
• Hill , D. Further studies of the injection molding process . Applied Mathematical Modeling 1996 , 20 , 719 – 730 .
   Web of Science ®Google Scholar
• Ravindran , K. ; Lewis , R.W. Finite element modeling of solidification effects in mold filling . Finite Elements in Analysis and Design 1998 , 31 , 99 – 116 .
   Web of Science ®Google Scholar
• Han , S. ; Costa Franco , S. ; Ray Shishir , R. Integrated floor analysis during filling and post-filling stage of thermoset molding . Material Processing and Design 2004 , 712 , 180 – 185 .
   Google Scholar
• Long , L. ; Morris Philip , J. ; Agarwal , A. A review of parallel computing in computational aeroacustics . International Journal of Computational Fluid Dynamics 2004 , 18 , 493 – 502 .
   Web of Science ®Google Scholar
• Pichelin , E. ; Coupez , T. Finite element solution of 3D mold filling problem for viscous incompressible fluid . Computer Methods in Applied Mechanics and Engineering 1998 , 163 , 359 – 371 .
   Web of Science ®Google Scholar
• Pichelin , E. ; Coupez , T. ; A Taylor discontinuous Galerkin method for the thermal solution in 3D mold filling . Computer Methods in Applied Mechanics and Engineering 1999 , 178 , 153 – 169 .
   Web of Science ®Google Scholar
• Kumar Singh , A. Three-dimentional flow of a viscous fluid with heat and mass transfer . International Communications in Heat and Mass Transfer 2005 , 32 , 1420 – 1429 .
   Web of Science ®Google Scholar
• Zhai , M. ; Lam , Y.C. ; Au , C.K. ; Liu , D.S. Automated selection of gate location for plastic injection molding processing . Polymer-Plastics Technology and Engineering 2005 , 44 , 229 – 242 .
   Web of Science ®Google Scholar
• Shen , C. ; Zhai , M. Algorithm to optimize number of gates and locations in an injection mold . Plastics, Rubbers and Composites 2004 , 33 , 330 – 334 .
   Web of Science ®Google Scholar
• Yoon , K.B. ; Gi , J.N. ; Ho , S.R. ; Jae , W.L. Optimization of filling process in RTM using genetic algorithm . Korea-Australia Rheology Journal 2000 , 12 ( 1 ), 83 – 92 .
   Google Scholar
• Yarlagadda , P.K.D.V. ; Khong , C.A.T. Prediction of processing parameters for injection molding by using a hybrid neural network . Proceedings of the institution of Mechanical Engineers 2001 , 215 , 1465 – 1470 .
   Web of Science ®Google Scholar
• Yarlagadda , P.K.D.V. ; Khong , C.A.T. Development of a hybrid neural network system for prediction of process parameters in injection molding . Journal of Materials Processing Technology 2001 , 118 , 110 – 116 .
   Web of Science ®Google Scholar
• Huang , S.J. ; Lee , T.H. Application of neural networks in injection molding process control . International Journal of Avanced Manufacturing Technology 2003 , 21 , 956 – 964 .
   Web of Science ®Google Scholar
• Shi , F. ; Lou , Z.L. ; Lu , J.G. ; Zhang , Y.Q. Optimization of plastic injection molding process with soft computing . The International Journal of Advanced Manufacturing Technology 2003 , 21 , 656 – 661 .
   Web of Science ®Google Scholar
• Chen , X. ; Furong , G. ; Guohua , C. A soft-sensor development for melt-flow-length measurement during injection mold filling . Materials Science and Engineering 2004 , 384 , 245 – 254 .
   Google Scholar
• Claveria , I. ; Javierre , C. ; Ponz , L. Method for generation of rheological model to characterize non-conventional injection molding by means of spiral mold . Journal of Materials Processing Technology 2005 , 162–163 , 477 – 483 .
   Web of Science ®Google Scholar
• Bossi , N. Molding Machines and Molds for Plastics Processing , McGraw-Hill : Milano , Italia , 1993 .
   Google Scholar
• Jansen , K.M.B. Heat transfer in injection molding systems with isulation layers and heating elements . International Journal of heat and mass transfer 1995 , 38 , 309 – 316 .
   Web of Science ®Google Scholar
• Shimizu , T. ; Ohtani , M. Numerical simulation of heat transfer and fluid flow applied to exhaust manifold . JSAE Review 1996 , 17 , 17 – 23 .
   Google Scholar
• Seddeek , M.A. Finite element method for the effect of various injection parameter on heat transfer for a power-law non-Newtonian fluid over a continuous stretched surface with thermal radiation . Computational Materials Science 2006 , 66 , 624 – 627 .
   Google Scholar
• Van , S.M. ; Vandierendonck , K. ; Mol , C. ; De Cleecq , E. Practice vs. laboratory tests for plastic injection molding . Surface & Coatings Technology 2001 , 143 – 145 .
   Web of Science ®Google Scholar
• Nardin , B. ; Kuzman , K. ; Kampus , Z. Injection molding simulation results as an input to the injection molding process . Journal of Materials Processing Technology 2002 , 130–131 , 310 – 314 .
   Web of Science ®Google Scholar
• Ozdemir , A. ; Uluer , O. ; Guldas , A. Flow front advancement of molten thermoplastic materials during filling stage of a mold cavity . Polymer Testing 2004 , 23 , 957 – 966 .
   Web of Science ®Google Scholar
• Au , C.K. A geometric approach for injection mold filling simulation . International Journal of Machine Tools & Manufacture 2005 , 45 , 115 – 124 .
   Web of Science ®Google Scholar
• Kondic , L. ; Palffy-Muhoray , P. ; Shelley , M.J. Models of non-Newtonian Hele-Shaw flow . Physical Review E 1996 , 54 , 536 – 539 .
   Web of Science ®Google Scholar
• Guermond , J.L. ; Quartapelle , L. A projection FEM for variable density incompressible flows . Journal of Computational Physics 2000 , 165 , 167 – 188 .
   Web of Science ®Google Scholar
• Boschan , A. ; Charette , V.J. ; Gabbanelli , S. ; Ippolito , I. ; Chertcoff , R. Tracer dispersion of non-Newtonian fluids in a Hele-Shaw cell . Physica A 2003 , 327 , 49 – 53 .
   Web of Science ®Google Scholar
• Koszkul , J. ; Nabialek , J. Viscosity models in simulation of the filling stage of the injection molding process . Journal of Materials Processing Technology 2004 , 157–158 , 183 – 187 .
   Web of Science ®Google Scholar
• Bickerton , S. ; Advani , S.G. Experimental investigation and flow visualization of the resin-transfer mold-filling process in a non-planar geometry . Composites Science and Technology 1997 , 57 , 23 – 33 .
   Web of Science ®Google Scholar
• Frank , P.T.B. Mixed finite element methods for viscoelastic flow analysis: A review . Journal of Non-Newtonian Fluid Mechanics 1998 , 79 , 361 – 385 .
   Web of Science ®Google Scholar
• Zhen-Xiang , G. ; Mujumdar , A.S. Flow and heat transfer in convection-dominated melting in a rectangular cavity heated from below . International journal of Heat and Mass Transfer 1998 , 41 ( 17 ), 2573 – 2580 .
   Web of Science ®Google Scholar
• Dimitrova , Z. ; Faria , L. Finite element modeling of the resin transfer molding process based on homogenization techniques . Computers & Structures 2000 , 76 , 379 – 397 .
   Web of Science ®Google Scholar
• Hong , W.Y. ; Wiwatanapataphee , B. ; Yu , X. An enthalpy control volume method for transient mass and heat transport with solidification . International Journal of Computational Fluid Dynamics 2004 , 18 , 577 – 584 .
   Web of Science ®Google Scholar
• Lan , X.K. Khodadadi , J.M. Fluid flow, heat transfer and solidification in the mold of continuous casters during ladle change . International Journal of Heat and Mass Transfer 2001 , 44 , 953 – 965 .
   Web of Science ®Google Scholar
• Tezduyar , T.E. Finite elements in fluids: Spatial methods and enhanced solution techniques. Computers and Fluids 2007, 37, 207–223.
   Google Scholar
• Piau , M. ; Piau , J.M. Plane couette flow of viscoplastic materials along a slippery vibrating wall . Journal of Non-Newtonian Fluid Mechanics 2005 , 125 , 71 – 85 .
   Web of Science ®Google Scholar
• Khosla , P.K. ; Rubin , S.G. A review of strongly coupled algorithms for viscous floe problems . Computers & Fluids 2001 , 30 , 927 – 937 .
   Web of Science ®Google Scholar
• Deleglise , M. ; Binetruy , C. ; Krawczak , P. Solution of filling time prediction issues for constant pressure driven injection in RTM . Composites: Part A 2005 , 36 , 339 – 344 .
   Web of Science ®Google Scholar
• Chen , S.C. ; Chen , Y.C. ; Cheng , N.T. ; Huang , M.S. Simulation of injection-compression mold-filling process . International Communications in Heat and Mass Transfer 1998 , 25 ( 7 ), 907 – 917 .
   Web of Science ®Google Scholar
• Ervin , N.J. ; Miles William , W. Approximation of time-dependent viscoelastic fluid flow: SPUG approximation . Journal of Numerical Analysis 2003 , 41 ( 2 ), 457 – 486 .
   Web of Science ®Google Scholar
• Joseph , D.D. Potential flow of viscous fluids: Historical notes . International Journal of Multiphase Flow 2006 , 32 , 285 – 310 .
   Web of Science ®Google Scholar
• Argyris , J. ; Laxander , A. ; Szimmat , J. Petrov-Galerkin finite element approach to coupled heat and fluid flow . Computer Methods in Applied Mechanics and Engineering 1992 , 94 , 181 – 200 .
   Web of Science ®Google Scholar
• Ruiz , E. ; Achim , V. ; Trochu , F. ; Breard , J. Optimization of injection flow rate to minimize micro/macro-voids formulation in resin transfer molded composites . Composites Science and Technology 2006 , 66 , 475 – 486 .
   Web of Science ®Google Scholar
• Shojaei , A. A numerical study of filling process through multilayer performs in resin injection/compression molding . Composites Science and Technology 2006 , 66 , 1546 – 1557 .
   Web of Science ®Google Scholar
• Qi-Lin , Z. ; Xiao-Qun , L. Finite element method for developing arbitrary surfaces to flattened forms . Finite Elements in Analysis and Design 2003 , 39 , 977 – 984 .
   Web of Science ®Google Scholar
• Blanchard , C.H. ; Gutierrez , G. ; White , J.A. ; Roemer , R.B. Hybrid finite element-finite difference method for thermal analysis of blood vessels . International Journal of Hyperthermia 2000 , 16 , 314 – 353 .
   Web of Science ®Google Scholar
• Long , L.N. ; Morris , P.J. ; Agarwual , A. A review of parallel computing in computational aeroacustics . International Journal of Computational Fluid Dynamics 2004 , 18 ( 6 ), 493 – 592 .
   Web of Science ®Google Scholar
• Wintruff , I. ; Gunther , C. ; Class , A.G. An interface-tracking control-volume finite-element method for melting and solidification problems Part I: Formulation . Numerical Heat Transfer 2001 , 39 , 101 – 125 .
   Web of Science ®Google Scholar
• Campos , S.J.B. ; Mendes de , M.L.F. A control-volume finite-element method (CVFEM) for unsteady, incompressible, viscous fluid flows . Numerical Heat Transfer 2001 , 40 , 61 – 82 .
   Web of Science ®Google Scholar
• Naterer , G.F. Eulerian three-phase formulation with coupled droplet flow and multimode heat transfer . Numerical Heat Transfer 2003 , 43 , 331 – 352 .
   Web of Science ®Google Scholar
• Nair , R.D. ; Thomas , S.J. ; Loft , R.D. A discontinuous Galerkin transport scheme on the cubed sphere . Monthly Weather Review 2005 , 133 ( 8 ), 814 – 828 .
   Web of Science ®Google Scholar
• Feistauer , M. ; Svadlenka , K. Discontinuous Galerkin method of lines for solving nonstationary singularly perturbed linear problems . Journal of Numerical Mathematics 2004 , 12 , 97 – 117 .
   Google Scholar
• Barsoum , M.E. ; Alexandrou , A.N. Stable finite element solutions of fully viscous compressible flows . Finite Elements in Analysis and Design 1995 , 19 , 69 – 87 .
   Web of Science ®Google Scholar
• Ervin , V.J. ; Miles , W. Approximation of time-dependent viscoelastic flow: SPUG approximation . SIAM Journal of numerical Analysis 2003 , 2 , 457 – 486 .
   Google Scholar
• Berger , R.C. ; Stockstill , R.L. Finite-element model for high-velocity channels . Journal of Hydraulic Engineering 1995 , 121 , 710 – 716 .
   Web of Science ®Google Scholar