The Interface and Interphase in Polymer Matrix Composites: Effect on Mechanical Properties and Methods for Identification

References

• Sharpe , L. H. 1972 . “The interphase in adhesion” . J Adhes. , 4 : 51 – 64 .
   Web of Science ®Google Scholar
• Sharpe , L. H. 1974 . “Some thoughts about the mechanical response of composites” . J Adhes. , 6 : 15 – 21 .
   Web of Science ®Google Scholar
• Drzal , L. T. , Rich , M. J. , Koenig , M. F. and Lloyd , P. F. 1983 . “Adhesion of graphite fibers to epoxy matrices: II the effect of fiber finish” . J. Adhes. , 16 : 133 – 152 .
   Web of Science ®Google Scholar
• Sharpe , L. H. 1998 . “Some fundamental issues in adhesion: A conceptual view” . J Adhes. , 67 : 277 – 289 .
   Web of Science ®Google Scholar
• Roy , N. , Sengupta , R. and Bhowmick , A. K. 2012 . “Modifications of carbon for polymer composites and nanocomposites” . Prog. Polym. Sci. , 37 : 781 – 819 .
   Web of Science ®Google Scholar
• Rothon , R. N. and Hancock , M. 1995 . “General principles guiding selection and use of particulate materials” . In Particulate-Filled Composites , Edited by: Rothon , R. 1 – 45 . Harlow : Longman Group Ltd. .
   Google Scholar
• Hull , D. and Clyne , T. W. 1996 . An Introduction to Composite Materials, , 2nd Ed. , Cambridge : Cambridge University Press .
   Google Scholar
• Spanoudakis , J. and Young , R. J. 1984 . “Crack-propagation in a glass particle-filled epoxy-resin .1. effect of particle-volume fraction and size” . J. Mater. Sci. , 19 : 473 – 486 .
   Web of Science ®Google Scholar
• Spanoudakis , J. and Young , R. J. 1984 . “Crack-propagation in a glass particle-filled epoxy-resin. 2. Effect of particle matrix adhesion” . J. Mater. Sci. , 19 : 487 – 496 .
   Web of Science ®Google Scholar
• Lee , J.-J. , Ogin , S. L. and Smith , P. A. 1995 . “Interlaminar fracture toughness of glass fiber laminates additionally reinforced with carbon bead” . In Composite Materials: Fatigue and Fracture , Edited by: Martin , R. H. Vol. 5 , 38 – 60 . Philadelphia : American Society for Testing and Materials . ASTM STP 1230
   Google Scholar
• Bascom , W. D. , Ting , R. Y. , Moulton , R. J. , Riew , C. K. and Siebert , A. R. 1981 . “The fracture of an epoxy polymer containing elastomeric modifiers” . J. Mater. Sci. , 16 : 2657 – 2664 .
   Web of Science ®Google Scholar
• Rowe , E. H. , Siebert , A. R. and Drake , R. S. 1970 . “Toughening thermosets with liquid butadiene/acrylonitrile polymers” . Mod. Plast. , 47 : 110 – 117 .
   Google Scholar
• Kinloch , A. J. , Maxwell , D. L. and Young , R. J. 1985 . “The fracture of hybrid-particulate composites” . J. Mater. Sci. , 20 : 4169 – 4184 .
   Web of Science ®Google Scholar
• Milewski , J. V. and Katz , H. S. 1978 . “Introduction” . In Handbook of Fillers and Reinforcements for Plastics , Edited by: Katz , H. S. and Milewski , J. V. 3 – 8 . New York : Van Nostrund Reinhold .
   Google Scholar
• Bourgeat-Lami , E. and Lang , J. 1998 . “Encapsulation of inorganic particles by dispersion polymerization in polar media: 1. Silica nanoparticles encapsulated by polystyrene” . J. Colloid. Interf. Sci. , 197 : 293 – 308 .
   PubMed Web of Science ®Google Scholar
• Bourgeat-Lami , E. and Lang , J. 1999 . “Encapsulation of inorganic particles by dispersion polymerization in polar media: 2. Effect of silica size and concentration on the morphology of silica-polystyrene composite particles” . J. Colloid. Interf. Sci. , 210 : 281 – 289 .
   PubMed Web of Science ®Google Scholar
• Alexandre , M. and Dubois , P. 2000 . “Polymer-layered silicate nanocomposites: Preparation, properties and uses of a new class of materials” . Mater. Sci. Eng. R. , 28 : 1 – 63 .
   Web of Science ®Google Scholar
• Gilman , J. W. 1999 . “Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites” . Appl. Clay Sci. , 15 : 31 – 49 .
   Web of Science ®Google Scholar
• Porter , D. , Metcalfe , E. and Thomas , M. J.K. 2000 . “Nanocomposite fire retardants: A review” . Fire and Materials , 24 : 45 – 52 .
   Web of Science ®Google Scholar
• Zhou , R. , Hong , S. , Kear , B. H. and Lee , P. J. 1993 . “Influence of nanometre-scale copper filaments in niobium on mechanical and superconducting properties” . Nanos Mater. , 2 : 73 – 80 .
   Google Scholar
• Herzer , G. and Warlimont , H. 1992 . “Nanocrystalline soft magnetic materials by partial crystallization of amorphous alloys” . Nanos. Mater. , 1 : 263 – 268 .
   Google Scholar
• Schaefer , H.-E. , Kisker , H. , Kronmüller , H. and Würschum , R. 1992 . “Magnetic properties of nanocrystalline nickel” . Nanos. Mater. , 1 : 523 – 529 .
   Google Scholar
• Shull , R. D. and Bennett , L. H. 1992 . “Nanocomposite magnetic materials” . Nanos. Mater. , 1 : 83 – 88 .
   Google Scholar
• Giannelis , E. P. 2012 . Personal communication
   Google Scholar
• Coleman , J. N. , Curran , S. , Dalton , A. B. , Davey , A. P. , McCarthy , B. , Blau , W. and Barklie , R. C. 1998 . “Percolation-dominated conductivity in a conjugated-polymer-carbon-nanotube composite” . Phys. Rev B. , 58 : R7492 – R7495 .
   Web of Science ®Google Scholar
• Jang , B. Z. , Liau , J. Y. , Hwang , L. R. and Shih , W. K. 1990 . “Particulate and whisker modifications of matrix resin for improved toughness of fibrous composites” . J Reinf Plast Comp. , 9 : 314 – 334 .
   Web of Science ®Google Scholar
• Kunz-Douglass , S. , Beaumont , P. W.R. and Ashby , M. F. 1980 . “A model for the toughness of epoxy-rubber particulate composites” . J. Mater Sci. , 15 : 1109 – 1123 .
   Web of Science ®Google Scholar
• Scott , J. M. and Phillips , D. C. 1975 . “Carbon fiber composites with rubber toughened matrices” . J. Mater. Sci. , 10 : 551 – 562 .
   Web of Science ®Google Scholar
• Imanaka , M. , Takeuchi , Y. , Nakamura , Y. , Nishimura , A. and Iida , T. 2001 . “Fracture toughness of spherical silica-filled epoxy adhesives” . Int. J. Adhes. Adhes , 21 : 389 – 396 .
   Web of Science ®Google Scholar
• Doran , C. J. 1993 . The Mechanical Behaviour of Crossply Laminates with SiC Whisker Additions , PhD Thesis, University of Surrey .
   Google Scholar
• Hiljanen-Vainio , M. , Heino , M. and Seppälä , J. V. 1998 . “Reinforcement of biodegradable poly(ester-urethane) with fillers” . Polymer , 39 : 865 – 872 .
   Web of Science ®Google Scholar
• Garcia , R. , Evans , R. E. and Palmer , R. J. 1987 . “Structural property improvements though hybridized composites” . In Toughened Composites, ASTM STP 937 , Edited by: Johnston , N. J. 397 – 412 . Philadelphia : American Society for Testing and Materials .
   Google Scholar
• Xu , L. and Lee , J. L. 2004 . “Effect of nanoclay on the mechanical properties and shrinkage control of low profile unsaturated polyester resins cured at low temperatures” . Polymer. , 45 : 7325 – 7334 .
   Web of Science ®Google Scholar
• Miyagawa , H. , Jurek , R. J. , Mohanty , A. K. , Misra , M. and Drzal , L. T. 2006 . “Biobased epoxy/clay nanocomposites as a matrix for CFRP” . Composites: Part A. , 37 : 54 – 62 .
   Web of Science ®Google Scholar
• Yuan , L. , Ma , X. , Liang , G. , Huang , Y. and Liu , H. 2007 . “Organic rectorite modified -unsaturated polyester resin composites” . J. Compos. Mater , 41 : 1051 – 1065 .
   Web of Science ®Google Scholar
• Hsieh , T. H. , Kinloch , A. J. , Taylor , A. C. and Kinloch , I. A. 2011 . “The effect of carbon nanotubes on the fracture toughness and fatigue performance of a thermosetting epoxy polymer” . J. Mater Sci. , 46 : 7525 – 7535 .
   Web of Science ®Google Scholar
• Hsieh , T. H. , Kinloch , A. J. , Masania , K. , Taylor , A. C. and Sprenger , S. 2010 . “The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles” . Polymer , 51 : 6284 – 6294 .
   Web of Science ®Google Scholar
• Sinha Ray , S. and Okamoto , M. 2003 . “Polymer/layered silicate nanocomposites: a review from preparation to processing” . Prog. Polym. Sci. , 28 : 1539 – 1641 .
   Web of Science ®Google Scholar
• Djouani , F. , Herbst , F. , Chehimi , M. M. and Benzarti , K. 2011 . “Synthesis, characterization and reinforcing properties of novel, reactive clay/poly(glycidyl methacrylate) nanocomposites” . Constr. Build. Mater. , 25 : 424 – 431 .
   Web of Science ®Google Scholar
• Lange , F. F. 1970 . “The interaction of a crack front with a second-phase dispersion” . Philos. Mag. , 22 : 983 – 992 .
   Web of Science ®Google Scholar
• Lange , F. F. and Radford , K. C. 1971 . “Fracture energy of an epoxy composite system” . J. Mater. Sci. , 6 : 1197 – 1203 .
   Web of Science ®Google Scholar
• Qiao , Y. 2003 . “Fracture toughness of composite materials reinforced by debondable particulates” . Scripta Mater. , 49 : 491 – 496 .
   Web of Science ®Google Scholar
• Pearson , R. A. and Yee , A. F. 1989 . “Toughening mechanisms in elastomer-modified epoxies: Part 3 - The effect of cross-link density” . J. Mater Sci , 24 : 2571 – 2580 .
   Web of Science ®Google Scholar
• Levita , G. , De Petris , S. , Marchetti , A. and Lazzeri , A. 1991 . “Crosslink density and fracture toughness of epoxy resins” . J. Mater Sci. , 26 : 2348 – 2352 .
   Web of Science ®Google Scholar
• Huang , Y. and Kinloch , A. J. 1992 . “Modelling of the toughening mechanisms in rubber modified epoxy polymers: 2. A quantitative description of the microstructure fracture property relationships” . J. Mater Sci. , 27 : 2763 – 2769 .
   Web of Science ®Google Scholar
• Bagheri , R. and Pearson , R. A. 1996 . “Role of particle cavitation in rubber-toughened epoxies: I. microvoid toughening” . Polymer , 37 : 4529 – 4538 .
   Web of Science ®Google Scholar
• Bagheri , R , Marouf , B. T. and Pearson , R. A. 2009 . “Rubber-toughened epoxies: A critical review” . Polymer Reviews , 49 : 201 – 225 .
   Web of Science ®Google Scholar
• Guild , F. J. and Young , R. J. 1989 . “A predictive model for particulate filled composite materials: Part 2 - soft particles” . J. Mater. Sci. , 24 : 2454 – 2460 .
   Web of Science ®Google Scholar
• Fukui , T. , Kikuchi , Y. and Inoue , T. 1991 . “Elastic-plastic analysis of the toughening mechanism in rubber-modified nylon: Matrix yielding and cavitation” . Polymer , 32 : 2367 – 2371 .
   Web of Science ®Google Scholar
• Huang , Y. and Kinloch , A. J. 1992 . “Modelling of the toughening mechanisms in rubber modified epoxy polymers: 1. Finite element analysis studies” . J. Mater Sci. , 27 : 2753 – 2762 .
   Web of Science ®Google Scholar
• Lazzeri , A. and Bucknall , C. B. 1993 . “Dilatational bands in rubber-toughened polymers” . J. Mater. Sci. , 28 : 6799 – 6808 .
   Web of Science ®Google Scholar
• Bagheri , R. and Pearson , R. A. 2000 . “Role of particle cavitation in rubber-toughened epoxies: II. Inter-particle distance” . Polymer , 41 : 269 – 276 .
   Web of Science ®Google Scholar
• Liu , Z. H. , Kwok , K. W. , Li , R. K.Y. and Choy , C. L. 2002 . “Effects of coupling agent and morphology on the impact strength of high density polyethylene/CaCO3 composites” . Polymer , 43 : 2501 – 2506 .
   Web of Science ®Google Scholar
• Thio , Y. S. , Argon , A. S. and Cohen , R. E. 2004 . “Role of interfacial adhesion strength on toughening polypropylene with rigid particles” . Polymer , 45 : 3139 – 3147 .
   Web of Science ®Google Scholar
• Lazzeri , A. , Zebarjad , S. M. , Pracella , M. , Cavalier , K. and Rosa , R. 2005 . “Filler toughening of plastics. Part 1; The effect of surface interactions on physico-mechanical properties and rheological behaviour of ultrafine CaCO3/HDPE nanocomposites” . Polymer. , 46 : 827 – 844 .
   Web of Science ®Google Scholar
• Pearson , R. A. and Yee , A. F. 1991 . “Influence of particle size and particle size distribution on toughening mechanisms in rubber-modified epoxies” . J. Mater. Sci. , 26 : 3828 – 3844 .
   Web of Science ®Google Scholar
• Shieu , F. S. 1997 . “Prediction of the critical particle size for toughening a glassy polymer” . Polymer. , 38 : 3135 – 3137 .
   Web of Science ®Google Scholar
• Liu , Z. H. , Zhang , X. D. , Zhu , X. G. , Li , R. K.Y. , Qi , Z. N. , Wang , F. S. and Choy , C. L. 1998 . “Effect of morphology on the brittle ductile transition of polymer blends: 3. Influence of the rubber particle spatial distribution on the fracture behaviour of poly(vinyl chloride)/nitrile rubber blends” . Polymer , 39 : 5027 – 5033 .
   Web of Science ®Google Scholar
• Liu , Z. H. , Zhang , X. D. , Zhu , X. G. , Li , R. K.Y. , Qi , Z. N. , Wang , F. S. and Choy , C. L. 1998 . “Effect of morphology on the brittle ductile transition of polymer blends: 4. influence of the rubber particle spatial distribution in poly(vinyl chloride)/nitrile rubber blends” . Polymer , 39 : 5035 – 5045 .
   Web of Science ®Google Scholar
• Liu , Z. H. , Zhang , X. D. , Zhu , X. G. , Li , R. K.Y. , Qi , Z. N. , Wang , F. S. and Choy , C. L. 1998 . “Effect of morphology on the brittle ductile transition of polymer blends: 6. Influence of rubber particle spatial distribution on the toughening and stiffening of poly(vinyl chloride)/nitrile rubber blends” . Polymer , 39 : 5047 – 5052 .
   Web of Science ®Google Scholar
• Bagheri , R. and Pearson , R. A. 2000 . “Role of particle cavitation in rubber-toughened epoxies: II. Inter-particle distance” . Polymer. , 41 : 269 – 276 .
   Web of Science ®Google Scholar
• Kim , B. H. and Kim , H. S. 1989 . “Fracture characterization of short glass fiber reinforced thermoplastic polyester by the J-integral” . J. Mater Sci. , 24 : 921 – 925 .
   Web of Science ®Google Scholar
• Beamson , G. and Briggs , D. 1992 . High Resolution XPS of Organic Polymers: The Scienta ESCA 300 Database , Chichester , , UK : John Wiley & Sons .
   Google Scholar
• Watts , J. F. and Wolstenholme , J. 2003 . An Introduction to Surface Analysis by XPS and AES , Chichester , , UK : John Wiley & Sons Ltd .
   Google Scholar
• Briggs , D. and Grant , J. T. , eds. 2003 . Surface Analysis by Auger and X-Ray Photoelectron Spectroscopy , Manchester , , U.K : IM Publications, Chichester, U.K. and SurfaceSpectra Limited .
   Google Scholar
• Wepasnick , K. A. , Smith , B. A. , Bitter , J. L. and Fairbrother , D. H. 2010 . “Chemical and structural characterization of carbon nanotube surfaces” . Anal Bioanal Chem. , 396 : 1003 – 1014 .
   PubMed Web of Science ®Google Scholar
• Baer , D. R. , Lea , A. S. , Cazaux , J. , Geller , J. D. , Hammond , J. S. , Kover , L. , Powell , C. J. , Seah , M. P. , Suziki , M. , Wolstenholme , J. and Watts , J. F. 2010 . “Approaches to analysing insulators with Auger electron spectroscopy: Update and overview” . J. Elec. Spec. , 176 : 80 – 94 .
   Web of Science ®Google Scholar
• Cazeneuve , C. , Watts , J. F. and Castle , J. E. 1990 . “The structure of the interface in carbon fiber composites by scanning Auger microscopy” . J. Mater Sci. , 25 : 1902 – 1908 .
   Web of Science ®Google Scholar
• Weibel , D. , Wong , S. , Lockyer , N. , Blenkinsopp , P. , Hill , R. and Vickerman , J. C. 2003 . “A C60 primary ion beam system for time of flight secondary ion mass spectrometry: Its development and secondary ion yield characteristics” . Anal. Chem. , 75 : 1754 – 1764 .
   PubMed Web of Science ®Google Scholar
• Vickerman , J. , Brown , A. and Reed , N. , eds. 1989 . Secondary Ion Mass Spectrometry: Principles and Applications , Oxford : Oxford University Press .
   Google Scholar
• Briggs , D. and Vickerman , J. C. , eds. 2001 . ToF-SIMS: Surface Analysis by Mass Spectrometry , Manchester , , U.K. : IM Publications, Chichester, U.K. and SurfaceSpectra Limited .
   Google Scholar
• Vickerman , J. C. and Gilmore , I. S. , eds. 2009 . Surface Analysis: The Principal Techniques , Chichester , , UK : John Wiley & Sons .
   Google Scholar
• Packham , D. E. 2005 . “Acid-base interactions introduction” . In Handbook of Adhesion, , 2nd Ed. , Edited by: Packham , D. E. 5 – 7 . Chichester , , UK : John Wiley & Sons .
   Google Scholar
• Packham , D. E. 2005 . “Surface Energy Components” . In Handbook of Adhesion, , 2nd Ed. , Edited by: Packham , D. E. 517 – 520 . Chichester , , UK : John Wiley & Sons .
   Google Scholar
• Voelkel , A. , Strzemiecka , B. , Adamska , K. and Milczewska , K. 2009 . “Inverse gas chromatography as a source of physiochemical data” . J. Chroma. A. , 1216 : 1551 – 1566 .
   PubMed Web of Science ®Google Scholar
• Abel , M.-L. and Watts , J. F. 2005 . “Inverse gas chromatography” . In Handbook of Adhesion, , 2nd Ed. , Edited by: Packham , D. E. 252 – 254 . Chichester , , UK : John Wiley & Sons .
   Google Scholar
• Al-Saigh , Z. Y. and Munk , P. 1984 . “Study of polymer-polymer interaction coefficients in polymer blends using inverse gas chromatography” . Macromolecules , 17 : 803 – 809 .
   Web of Science ®Google Scholar
• Abel , M.-L. and Watts , J. F. 2005 . “Inverse gas chromatography and acid-base interactions” . In Handbook of Adhesion, , 2nd Ed. , Edited by: Packham , D. E. 255 – 257 . Chichester , , UK : John Wiley & Sons .
   Google Scholar
• Chehimi , M.M. , Abel , M.-L. , Watts , J. F. and Digby , R. P. 2001 . “Surface chemical and thermodynamic properties of y-glycidoxypropyltrimethoxysilane-treated alumina: an XPS IGC study” . J Mater Chem. , 11 : 533 – 543 .
   Web of Science ®Google Scholar
• Bussu , G. and Lazzeri , A. 2006 . “On the use of dynamic mechanical thermal aanalysis (DMTA) for measuring glass transition temperature of polymer matrix fiber reinforced composites” . J Mater Sci. , 41 : 6072 – 6076 .
   Web of Science ®Google Scholar
• Kotsikos , G. , Robinson , A. M. and Gibson , A. G. 2007 . “Prediction of elevated temperature, creep and damping behaviour of composite laminates from Quantitative DMTA” . Plastics, Rubber and Composites , 36 : 396 – 402 .
   Web of Science ®Google Scholar
• Watt , W. 1970 . “Production and properties of high modulus carbon fibers” . Proc Roy Soc Lond A , 319 : 5 – 15 .
   Web of Science ®Google Scholar
• Barber , M. , Swift , P. , Evans , E. L. and Thomas , J. M. 1970 . “High energy photoelectron spectroscopic study of carbon fiber surfaces” . Nature. , 227 : 1131 – 1132 .
   Web of Science ®Google Scholar
• Castle , J. E. and Watts , J. F. 1988 . “The study of interfaces in composite materials by surface analytical techniques” . In Interfaces in Polymer, Ceramic and Metal Matrix Composites , Edited by: Ishida , H. 57 – 71 . New York : Elsevier Science .
   Google Scholar
• Sherwood , P. M.A. 2009 . “Composites” . In Handbook of Surface and Interface Analysis: Methods for Problem Solving , Edited by: Rivière , J. C. and Myhra , S. 421 – 456 . New York : CRC Press .
   Google Scholar
• Proctor , A. and Sherwood , P. M.A. 1982 . “X-ray photoelectron spectroscopic studies of carbon fiber surfaces. III. Industrially treated fibers and the effect of heat and exposure to oxygen” . Surf. Interf. Anal. , 4 : 212 – 219 .
   Web of Science ®Google Scholar
• Kozlowski , C. and Sherwood , P. M.A. 1985 . “X-ray photoelectron-spectroscopic studies of carbon-fiber surfaces. 5. The Effect of pH on surface oxidation” . J. Chem. Soc. Farad. Trans. I. , 80 : 2745 – 2756 .
   Google Scholar
• Denison , P. , Jones , F. R. and Watts , J. F. 1985 . “X-ray photoelectron spectroscopy analysis of Ba labelled carbon fiber surfaces” . J. Mater Sci. , 20 : 4647 – 4656 .
   Web of Science ®Google Scholar
• Denison , P. , Jones , F. R. and Watts , J. F. 1988 . “A quantification and investigation of surface microporosity in carbon fibers using labelling and XPS” . Surf. Interf. Anal. , 12 : 455 – 460 .
   Web of Science ®Google Scholar
• Denison , P. , Jones , F. R. and Watts , J. F. 1987 . “The use of XPS and labelling techniques to study the surface chemistry of carbon fibers” . J. Phys. D. , 20 : 306 – 310 .
   Web of Science ®Google Scholar
• Zhdan , P. A. , Bors , M. and Castle , J. E. 1998 . “In situ scanning force microscopy (SFM) study of the electrochemical activation of carbon fibers” . Comp. Sci. Tech. , 58 : 559 – 570 .
   Web of Science ®Google Scholar
• Baillie , C. , Castle , J. E and Watts , J. F. 1992 . “Determination of the acidity of carbon fiber surfaces by the use of XPS adsorption isotherms” . J. Mater. Chem. , 2 : 939 – 944 .
   Web of Science ®Google Scholar
• Watts , J. F. and Castle , J. E. 1999 . “The determination of adsorption isotherms by XPS and ToF-SIMS: Their role in adhesion science” . Int. J. Adhes. Adhes. , 19 : 435 – 443 .
   Web of Science ®Google Scholar
• Vickers , P. E. , Turner , M. E , Abel , M.-L. and Watts , J. F. 1998 . “The interaction of organic molecules with carbon fiber surfaces: A ToF-SIMS study” . Composites. , 29A : 1291 – 1304 .
   Google Scholar
• Vickers , P. E. , Castle , J. E. and Watts , J. F. 1999 . “Quantification routines for adsorption studies in SSIMS and the effect of ionisation probability” . Appl. Surf. Sci. , 150 : 244 – 254 .
   Web of Science ®Google Scholar
• Denison , P. , Jones , F. R. , Brown , A. , Humphrey , P. and Harvey , J. 1988 . “Scanning secondary ion mass spectroscopic studies of the micromechanics and chemical structure in the region of the interface in carbon fiber-epoxy composites” . J. Mater Sci. , 23 : 2153 – 2156 .
   Web of Science ®Google Scholar
• Vickers , P. E. , Watts , J. F. , Perruchot , C. and Chehimi , M. M. 2000 . “The surface chemistry and acid-base properties of a PAN-based carbon fiber” . Carbon. , 38 : 675 – 689 .
   Web of Science ®Google Scholar
• Lindsay , B. , Abel , M.-L. and Watts , J. F. 2007 . “A Study of electrochemically treated PAN based carbon fibers by IGC and XPS” . Carbon. , 45 : 2433 – 2444 .
   Web of Science ®Google Scholar
• Wang , Y.-Q. and Sherwood , P. M.A. 2004 . “Studies of carbon nanotubes and fluorinated nanotubes by x-ray and ultraviolet photoelectron spectroscopy” . Chem. Mater. , 16 : 5427 – 5436 .
   Web of Science ®Google Scholar
• Prickett , A. C. , Smith , P. A. and Watts , J. F. 2001 . “ToF-SIMS studies of carbon fiber fracture surfaces and the development of controlled Mode in situ fracture” . Surf. Interf. Anal. , 31 : 11 – 17 .
   Web of Science ®Google Scholar
• Wood , A. R. , Benedetto , N. , Hooker , N. , Scullion , E. , Smith , P. A. and Watts , J. F. 2008 . “Development of an automated in situ fracture stage for a ToF-SIMS system” . Surf. Interf. Anal. , 40 : 1409 – 1414 .
   Web of Science ®Google Scholar
• Kinloch , A. J. , Little , M. A. and Watts , J. F. 2000 . “The role of the interphase in the environmental failure of adhesive joints” . Acta Materialia , 48 : 4543 – 4553 .
   Web of Science ®Google Scholar
• Abel , M.-L. and Watts , J. F. 2009 . “Examination of the interface of a model adhesive joint by surface analysis: A study by XPS and ToF-SIMS” . Surf. Interf. Anal. , 41 : 508 – 516 .
   Web of Science ®Google Scholar
• Bertho , J. , Stolojan , V. , Abel , M.-L. and Watts , J. F. 2010 . “The effect of silane incorporation on a metal adhesive interface: A study by electron energy loss spectroscopy” . Micron. , 41 : 130 – 134 .
   Web of Science ®Google Scholar
• Bescher , E. and Mckenzie , J. D. 1998 . “Hybrid organic-inorganic sensors” . Mat. Sci. Eng. C. , 6 : 145 – 154 .
   Web of Science ®Google Scholar
• Lebeau , B. and Sanchez , C. 1999 . “Sol-gel derived hybrid inorganic-organic nanocomposites for optics” . Curr. Opin. Solid. St. M. , 4 : 11 – 23 .
   Web of Science ®Google Scholar
• Arkhireeva , A. and Hay , J. N. 2003 . “Synthesis of sub-200 nm silsesquioxane particles using a modified Stöber sol-gel route” . Journal of Materials Chemistry. , 13 : 3122 – 3127 .
   Web of Science ®Google Scholar
• Jesson , D. A. , Smith , P. A. , Hay , J. N. and Watts , J. F. 2007 . “The effect of ormosil nano-particles on the toughness of a polyester resin” . J. Mater Sci. , 43 : 3230 – 3237 .
   Web of Science ®Google Scholar
• Jesson , D. A. , Arkhireeva , A. , Hay , J. N. , Smith , P. A. and Watts , J. F. “Organic-inorganic hybrid nanoparticles as modifiers for polymer composite matrices” . In Proceedings of the 11th European Conference on Composite Materials (ECCM-11): Rhodes . C086
   Google Scholar
• Rice , J. R. 1968 . “A path independent integral and the approximate analysis of strain concentration by notches and cracks” . J. Appl. Mech-T ASME. , 35 : 379 – 386 .
   Web of Science ®Google Scholar
• Begley , J. A. and Landes , J. D. 1972 . “The J-integral as a fracture criterion” . In Fracture Toughness, Proceedings of the 1971 National Symposium on Fracture Mechanics , 1 – 20 . Philadelphia : Part II (ASTM STP 514), American Society for Testing and Materials .
   Google Scholar
• Rice , J. R. , Paris , P. C. and Merkle , J. G. 1973 . “Some further of J-integral analysis and estimates” . In Progress in Flaw Growth and Fracture Toughness Testing (ASTM STP 536), American Society for the Testing of Materials 231 – 245 . Philadelphia
   Google Scholar
• Atkins , A. G. and Mai , Y. W. 1985 . Elastic and Plastic Fracture , 324 – 328 . Chichester : Ellis Horwood Ltd. .
   Google Scholar
• ASTM E 1737–96 . 1996 . “Standard test method for J-integral characterization of fracture toughness” . In Annual Book of ASTM Standards , 994 – 1016 . Philadelphia : American Society for the Testing of Materials .
   Google Scholar
• Jesson , D. A. , Abel , M.-L. , Arkhireeva , A. , Hay , J. N. , Smith , P. A. and Watts , J. F. 2004 . “Organic-inorganic hybrid nanoparticles: Adsorption characteristics of polyester resins” . Surf. Interf. Anal. , 36 : 765 – 768 .
   Web of Science ®Google Scholar
• Jesson , D. A. , Abel , M.-L. , Hay , J. N. , Smith , P. A. and Watts , J. F. 2006 . “Organic-inorganic hybrid nano-particles: Surface characteristics and interactions with a polyester resin” . Langmuir. , 22 : 5144 – 5151 .
   PubMed Web of Science ®Google Scholar
• Wood , A. R. , Abel , M.-L. , Smith , P. A. and Watts , J. F. 2009 . “Chemical characterisation of the fracture surfaces of polyester resin and a polyester-based nanocomposite” . J. Adhes. Sci. Tech. , 23 : 689 – 708 .
   Web of Science ®Google Scholar
• Wood , A. R. , Mäder , E. , Gao , S.-L. , Jones , F. R. , Liu , Z. , Watts , J. F. and Smith , P. A. “Interfacial Properties of Glass Fiber/Nanoparticulate Reinforced Polyester Resin” . Proceedings of the 17th International Conference on Composite Materials . Edinburgh , UK.
   Google Scholar
• Wood , A. R. , Smith , P. A. and Watts , J. F. 2007 . “The forensic study of single fiber pull-out specimens using ToF-SIMS” . Compos. Interface. , 14 : 387 – 402 .
   Web of Science ®Google Scholar