Polysulfide Polymers: Synthesis, Blending, Nanocomposites, and Applications

References

• Syao, O.; Malysheva, G. V. “Properties and application of rubber-based sealants”, Polym. Sci. Ser. D. 2014, 7, 222–227.
   Google Scholar
• Lafont, U.; van Zeijl, H.; van der Zwaag, S. “Influence of cross-linkers on the cohesive and adhesive self-healing ability of polysulfide-based thermosets”, ACS Appl. Mater. Interfaces 2012, 4, 6280–6288.
   PubMed Web of Science ®Google Scholar
• Fettes, E. M.; Jorczak, J. S. “Polysulfide polymers”, Ind. Eng. Chem. 1950, 42, 2217–2223.
   Web of Science ®Google Scholar
• Jorczak, J. S.; Fettes, E. M. “Polysulfide liquid polymers”, Ind. Eng. Chem. 1951, 43, 324–328.
   Web of Science ®Google Scholar
• Zhang, J.; Wang, Z.; Ding, G.; Quan, Y.; Chen, Q. “The effect of epoxy resin to reduce the compression set of polysulfide sealant”, J. Appl. Polym. Sci. 2012, 125, 390–395.
   Web of Science ®Google Scholar
• Novakov, I. A.; Nistratov, A. V.; Frolova, V. I.; Klimov, V. V.; Pyl’nov, D. V.; Gugina, S. Y.; Titova, E. N. “Peculiarities of the production of materials based on polysulfide oligomer-polymerizable compound compositions cured in the presence of manganese oxide”, Polym. Sci. Ser. D. 2012, 5, 96–101.
   Google Scholar
• Kloxin, C. J.; Bowman, C. N. “Covalent adaptable networks: Smart, reconfigurable and responsive network systems”, Chem. Soc. Rev. 2013, 42, 7161–7173.
   PubMed Web of Science ®Google Scholar
• Zhang, Y.; Shao, L.; Dong, D.; Wang, Y. “Enhancement of water and organic solvent resistances of a waterborne polyurethane film by incorporating liquid polysulfide”, RSC Adv. 2016, 6, 17163–17171.
   Web of Science ®Google Scholar
• Krishnan, K.; Ninan, K. N. “Thermal and mechanical studies on the cure time optimisation of polysulphide resin”, J. Therm. Anal. 1989, 35, 1223–1228.
   Google Scholar
• Donskoi, A. A.; Grigoryan, G. V. “Polysulfide and organosilicon low-molecular-mass rubbers and sealants on their basis”, Polym. Sci. Ser. C. 2007, 49, 279–283.
   Web of Science ®Google Scholar
• Matsui, T.; Miwa, Y. “Detection of a new crosslinking and properties of liquid polysulfide polymer”, J. Appl. Polym. Sci. 1999, 71, 59–66.
   Web of Science ®Google Scholar
• Meng, J. Y.; Wang, Y. Y. “Effects of hydrothermal treatment on the structure and properties of aviation polysulfide sealant,” Acad. Manage. Rev. 2012, 621, 87–92.
   Google Scholar
• Russavskaya, N. V.; Silinskaya, Y. N.; Yakimova, G. A.; Korchevin, N. A.; Tomin, V. P.; Deryagina, E. N. “Thiokols based on wastes from epichlorohydrin production as components of rail lubricants”, Russ. J. Appl. Chem. 2002, 75, 261–264.
   Web of Science ®Google Scholar
• Prozorova, G. F.; Mazyar, I. V.; Nosyreva, V. V.; Korzhova, S. A.; Vakul’skaya, T. I.; Trofimov, B. A. “Preparation and properties of polyvinylene polysulfides based on trichloroethene and sodium polysulfides”, Russ. J. Gen. Chem. 2014, 84, 892–900.
   Web of Science ®Google Scholar
• Zhang, Y.; Peng, Y.; Wang, Y.; Li, J.; Li, H.; Zeng, J.; Wang, J.; Hwang, B. J.; Zhao, J. “High sulfur-containing carbon polysulfide polymer as a novel cathode material for lithium-sulfur battery”, Sci. Rep. 2017, 7, 11386.
   PubMed Web of Science ®Google Scholar
• Takata, T.; Saeki, D.; Makita, Y.; Yamada, N.; Kihara, N. “Aromatic hydrocarbon-catalyzed direct reaction of sulfur and sodium in a heterogeneous system: Selective and facile synthesis of sodium monosulfide and disulfide”, Inorg. Chem. 2003, 42, 3712–3714.
   PubMed Web of Science ®Google Scholar
• Bertozzi, E. R. “Polymeric sulfur and related polymers”, J. Polym. Sci. Part A-1: Polym. Chem. 1966, 4, 2910.
   Web of Science ®Google Scholar
• Tobolsky, A. V. “Polymeric sulfur and related polymers”, J. Polym. Sci. Part C: Polym. Symp. 1966, 12, 71–78.
   Google Scholar
• Amangah, M.; Salami-Kalajahi, M.; Roghani-Mamaqani, H. “Nanoconfinement effect of graphene on thermophysical properties and crystallinity of matrix-grafted graphene/crosslinked polysulfide polymer nanocomposites”, Diam. Relat. Mater. 2018, 83, 177–183.
   Web of Science ®Google Scholar
• Hadavand, B. S.; Bitumen, M. “With polysulphide polymer prepared from heavy end waste”, Iran. Polym. J. 2010, 19, 363–373.
   Web of Science ®Google Scholar
• Le Fave, G. M.; Hayashi, F. Y. Thiol Terminated Liquid Polymers. US Patent 3,278,496, 1966.
   Google Scholar
• Kanemura, Y.; Nagata, T.; Okazaki, K. “Polythiol, process for producing same, sulfur-containing urethane-base resin prepared from the polythiol, process for producing the resin, and lens”, EP0,665,219-B1, 1998.
   Google Scholar
• Moqadam, S.; Salami-Kalajahi, M. “Halogenated sunflower oil as a precursor for synthesis of polysulfide polymer”, e-Polymers. 2016, 16, 33–39.
   Web of Science ®Google Scholar
• Moqadam, S.; Salami-Kalajahi, M.; Mahdavian, M. “Synthesis and characterization of sunflower oil-based polysulfide polymer/cloisite 30B nanocomposites”, Iran. J. Chem. Chem. Eng. 2018, 37, 185–192.
   Google Scholar
• Smith, K.; El-Hiti, G. A.; Al-Zuhairi, A. J. “The synthesis of polymeric sulfides by reaction of dihaloalkanes with sodium sulfide”, J. Sulfur Chem. 2011, 32, 521–531.
   Web of Science ®Google Scholar
• Sheydaei, M.; Kalaee, M. R.; Allahbakhsh, A.; Samar, M.; Aghili, A.; Dadgar, M.; Moosavi, G. S. “Characterization of synthesized poly(aryldisulfide) through interfacial polymerization using phase-transfer catalyst”, J. Sulfur Chem. 2012, 33, 303–311.
   Web of Science ®Google Scholar
• Sheydaei, M.; Kalaee, M. R.; Allahbakhsh, A.; Moradi-e-Rufchahi, E. O.; Samar, M.; Moosavi, G.; Sedaghat, N. “Synthesis and characterization of poly(p-xylylene tetrasulfide) via interfacial polycondensationcin the presence of phase transfer catalysts”, Des. Monomers Polym. 2013, 16, 191–196.
   Web of Science ®Google Scholar
• Kalaee, M. R.; Famili, M. H. N.; Mortezaei, M.; Zeeb, M. “Polymerization of ethylene dichloride and sodium tetrasulfide: Synthesis and kinetic studies”, J. Sulfur Chem. 2010, 31, 247–253.
   Web of Science ®Google Scholar
• Kalaee, M. R.; Famili, M. H. N.; Dadgar, M.; Olyai, M. R. T. B.; Naderi, A. “Polymerization of methylene dichloride and sodium tetrasulfide: synthesis and kinetic studies”, Phosphorus Sulfur Silicon Relat. Elem. 2010, 185, 588–594.
   Web of Science ®Google Scholar
• Kalaee, M. R.; Famili, M. H. N.; Mahdavi, H.; Naderi, A. “Synthesis, characterization and properties of poly(methylenetetrasulfide) using interfacial catalysis”, Polym. Sci. Ser. B. 2010, 52, 286–291.
   Web of Science ®Google Scholar
• Sheydaei, M.; Allahbakhsh, A.; Haghighi, A. H.; Ghadi, A. “Synthesis and characterization of poly(methylene disulfide) and poly(ethylene disulfide) polymers in the presence of a phase transfer catalyst”, J. Sulfur Chem. 2014, 35, 67–73.
   Web of Science ®Google Scholar
• Sheydaei, M.; Jabari, H.; Dehaghi, H. A.-A. “Synthesis and characterization of ethylene-xylene-based polysulfide block-copolymers using the interfacial polymerization method”, J. Sulfur Chem. 2016, 37, 1–655.
   Web of Science ®Google Scholar
• Li, F.; Tang, B.; Wu, S.; Zhang, S. “Facile synthesis of monodispersed polysulfide spheres for building structural colors with high color visibility and broad viewing angle”, Small. 2017, 13, 1602565.
   Web of Science ®Google Scholar
• Lim, J.; Jung, U.; Joe, W. T.; Kim, E. T.; Pyun, J.; Char, K. “High sulfur content polymer nanoparticles obtained from interfacial polymerization of sodium polysulfide and 1,2,3-trichloropropane in water”, Macromol. Rapid Commun. 2015, 36, 1103–1107.
   PubMed Web of Science ®Google Scholar
• Zhou, B.; Shen, M.; Wang, Q.; Chen, Q. “Kinetic study of polysulfide-acrylate click reaction by DEA and DMA”, Polym. Adv. Technol. 2011, 22, 2374–2381.
   Web of Science ®Google Scholar
• Zhou, B.; Zhang, J.; Wang, Q.; Chen, Q. “Improvement in compression performance of the polysulfide sealant by thiol-acrylate reaction”, Polym. Eng. Sci. 2012, 52, 912–919.
   Web of Science ®Google Scholar
• Rezaeian, I.; Zahedi, P.; Rezaeian, A.; Ghadiri, M.; Honarvar, F. M.; Mohammadi, A. H. “Optimized formulation of an oxidative curing system for liquid polysulfide sealants used in fuel tanks by d-optimal design method”, J. Appl. Polym. Sci. 2011, 120, 2550–2562.
   Web of Science ®Google Scholar
• Fettes, E. M.; Jorczak, J. S.; Panek, J. R. “Mechanism of vulcanization of polysulfide rubbers”, Ind. Eng. Chem. 1954, 46, 55–1541.
   Google Scholar
• Zhou, B.; He, D.; Quan, Y.; Chen, Q. “The investigation on the curing process of polysulfide sealant by in situ dielectric analysis”, J. Appl. Polym. Sci. 2012, 126, 1725–1732.
   Web of Science ®Google Scholar
• Lu, Y.; Shen, M.; Ding, X.; Quan, Y.; Chen, Q. “Compression set property and stress–strain behavior during compression of polysulfide sealants”, J. Appl. Polym. Sci. 2010, 115, 1718–1723.
   Web of Science ®Google Scholar
• Wang, Y. Y.; Meng, J. Y. “Effect of thermo-oxidative ageing on aviation polysulfide sealants”, Appl. Mech. Mater. 2012, 152–154, 28–33.
   Google Scholar
• Ding, M. L.; Zhang, W. F.; Hou, W. G.; Liu, X. “Tensile fracture characteristics of polysulfide sealants immersed in oil”, Mater. Sci. Forum 2011, 689, 455–460.
   Google Scholar
• Tobolsky, A. V. “Stress relaxation studies of the viscoelastic properties of polymers”, J. Appl. Phys. 1956, 27, 673.
   Web of Science ®Google Scholar
• Xu, Y.; Chen, D. “A novel self-healing polyurethane based on disulfide bonds”, Macromol. Chem. Phys. 2016, 217, 1191–1196.
   Web of Science ®Google Scholar
• Rekondo, A.; Martin, R.; de Luzuriaga, A. R.; Cabanero, G.; Grande, H. J.; Odriozola, I. “Catalyst-free room-temperature self-healing elastomers based on aromatic disulfide metathesis”, Mater. Horiz. 2014, 1, 237–240.
   Web of Science ®Google Scholar
• Hoyle, C. E.; Lowe, A. B.; Bowman, C. N. “Thiol-click chemistry: A multifaceted toolbox for small molecule and polymer synthesis”, Chem. Soc. Rev. 2010, 39, 1355–1387.
   PubMed Web of Science ®Google Scholar
• Gadwal, I.; Binder, S.; Stuparu, M. C.; Khan, A. “Dual-reactive hyperbranched polymer synthesis through proton transfer polymerization of thiol and epoxide groups”, Macromolecules. 2014, 47, 5070–5080.
   Web of Science ®Google Scholar
• Gao, L.; Li, X.; Wang, Y.; Zhu, W.; Shen, Z.; Li, X. “Injectable thiol‐epoxy “click” hydrogels”, J. Polym. Sci. Part A: Polym. Chem. 2016, 54, 2651–2655.
   Web of Science ®Google Scholar
• Cengiz, N.; Rao, J.; Sanyal, A.; Khan, A. “Designing functionalizable hydrogels through thiol–epoxy coupling chemistry”, Chem. Commun. 2013, 49, 11191–11193.
   PubMed Web of Science ®Google Scholar
• Guzmán, D.; Ramis, X.; Fernández-Francos, X.; Serra, A. “New catalysts for diglycidyl ether of bisphenol a curing based on thiol–epoxy click reaction”, Eur. Polym. J. 2014, 59, 377–386.
   Web of Science ®Google Scholar
• Pirayesh, A.; Salami-Kalajahi, M.; Roghani-Mamaqani, H.; Dehghani, E. “Amine-modified graphene oxide as co-curing agent of epoxidized polysulfide prepolymer: Thermophysical and mechanical properties of nanocomposites”, Diam. Relat. Mater. 2018, 86, 109–116.
   Web of Science ®Google Scholar
• De, S.; Khan, A. “Efficient synthesis of multifunctional polymers via thiol-epoxy ‘chemistry’”, Chem. Commun. (Camb.) 2012, 48, 3130–3132.
   PubMed Web of Science ®Google Scholar
• Binder, S.; Gadwal, I.; Bielmann, A.; Khan, A. “Thiol-epoxy polymerization via an AB monomer: Synthetic access to high molecular weight poly(β-hydroxythio-ether)s”, J. Polym. Sci. Part A: Polym. Chem. 2014, 52, 2040–2046.
   Web of Science ®Google Scholar
• Brandle, A.; Khan, A. “Thiol-epoxy ‘click’ polymerization: Efficient construction of reactive and functional polymers”, Polym. Chem. 2012, 3, 3224–3227.
   Web of Science ®Google Scholar
• Stuparu, M. C.; Khan, A. “Thiol-epoxy “click” chemistry: Application in preparation and postpolymerization modification of polymers”, J. Polym. Sci. Part A: Polym. Chem. 2016, 54, 3057–3070.
   Web of Science ®Google Scholar
• Teodorescu, M.; Stanescu, P. O.; Iovu, H.; Draghici, C. “Free radical polymerization of vinyl acetate in the presence of liquid polysulfides”, React. Funct. Polym. 2010, 70, 419–425.
   Web of Science ®Google Scholar
• Wang, C.; Chatani, S.; Podgórski, M.; Bowman, C. N. “Thiol-Michael addition miniemulsion polymerizations: Functional nanoparticles and reactive latex films”, Polym. Chem. 2015, 6, 3758–3763.
   Web of Science ®Google Scholar
• Chatani, S.; Wang, C.; Podgórski, M.; Bowman, C. N. “Triple shape memory materials incorporating two distinct polymer networks formed by selective Thiol–Michael addition reactions”, Macromolecules 2014, 47, 4949–4954.
   Web of Science ®Google Scholar
• Liu, Y.; Hou, W.; Sun, H.; Cui, C.; Zhang, L.; Jiang, Y.; Wu, Y.; Wang, Y.; Li, J.; Sumerlin, B. S.; et al. “Thiol-ene click chemistry: A biocompatible way for orthogonal bioconjugation of colloidal nanoparticles”, Chem. Sci. 2017, 8, 6182–6187.
   PubMed Web of Science ®Google Scholar
• Williams, A. K.; Davis, B. J.; Crater, E. R.; Lott, J. R.; Simon, Y. C.; Azoulay, J. D. “Thiol-ene click chemistry: A modular approach to solid-state triplet–triplet annihilation upconversion”, J. Mater. Chem. C. 2018, 6, 3876–3881.
   Web of Science ®Google Scholar
• Guchhait, P. K.; Rahaman, M.; Nayak, L.; Chaki, T. K. “Preparation and characterization of polyurethane/polysulfide miscible blend nanocomposites: Effect of nanoclay reinforcement on morphology, mechanical and thermal properties”, Int. Polym. Process. 2012, 27, 461–468.
   Web of Science ®Google Scholar
• Khakimullin, Y. N.; Kurkin, A. I.; Valeev, R. R.; Petlin, I. A. “New alternative to liquid thiokol in commercial sealants”, Polym. Sci. Ser. D 2017, 10, 1–3.
   Google Scholar
• Wan, T.; Chen, D. “Synthesis and properties of self-healing waterborne polyurethanes containing disulfide bonds in the main chain”, J. Mater. Sci. 2017, 52, 197–207.
   Web of Science ®Google Scholar
• Zhang, G. Z.; Fan, Z. K.; Quan, Y. W.; Chen, Q. M. “The preparation and physical properties of polysulfide-based elastomers through one-pot thiol-ene click reaction”, eXPRESS Polym. Lett. 2013, 7, 577–584.
   Web of Science ®Google Scholar
• Quan, Y. W.; Dong, W. Z.; Fang, J. L.; Chen, Q. M. “Ultraviolet curing of liquid polysulfide thiourethane acrylate”, J. Appl. Polym. Sci. 2004, 91, 2358–2363.
   Web of Science ®Google Scholar
• Hoogenboom, R. “Thiol-yne chemistry: A powerful tool for creating highly functional materials”, Angew. Chem. Int. Ed. Engl. 2010, 49, 3415–3417.
   PubMed Web of Science ®Google Scholar
• Hensarling, R. M.; Doughty, V. A.; Chan, J. W.; Patton, D. L. “Polymer brushes with thiol-yne chemistry: Indoors and out”, J. Am. Chem. Soc. 2009, 131, 14673–14675.
   PubMed Web of Science ®Google Scholar
• Wu, J.-T.; Huang, C.-H.; Liang, W.-C.; Wu, Y.-L.; Yu, J.; Chen, H.-Y. “Reactive polymer coatings: A general route to thiol‐ene and thiol‐yne click reactions”, Macromol. Rapid Commun. 2012, 33, 922–927.
   PubMed Web of Science ®Google Scholar
• Mohammadi, M.; Salami-Kalajahi, M.; Roghani-Mamaqani, H.; Golshan, M. “Synthesis and investigation of dual pH- and temperature-responsive behaviour of poly[2-(dimethylamino)ethyl methacrylate]-grafted gold nanoparticles”, Appl. Organomet. Chem. 2017, 31, e3702.
   Web of Science ®Google Scholar
• Zhang, Q.; Anastasaki, A.; Li, G.-Z.; Haddleton, A. J.; Wilson, P.; Haddleton, D. M. “Multiblock sequence-controlled glycopolymers via Cu(0)-LRP following efficient thiol–halogen, thiol–epoxy and CuAAC Reactions”, Polym. Chem. 2014, 5, 3876–3883.
   Web of Science ®Google Scholar
• Pradhan, S.; Guchhait, P. K.; Kumar, K. D.; Bhowmick, A. K. “Influence of nanoclay on the adhesive and physico-mechanical properties of liquid polysulfide elastomer”, J. Adhes. Sci. Technol. 2009, 23, 2013–2029.
   Web of Science ®Google Scholar
• Lu, Y.; Zhang, J.; Chang, P.; Quan, Y.; Chen, Q. “Effect of filler on the compression set, compression stress–strain behavior, and mechanical properties of polysulfide sealants”, J. Appl. Polym. Sci. 2011, 120, 2001–2007.
   Web of Science ®Google Scholar
• Allahbakhsh, A.; Sheydaei, M.; Mazinani, S.; Kalaee, M. “Enhanced thermal properties of poly(ethylene tetrasulfide) via expanded graphite incorporation by in situ polymerization method”, High Perform. Polym. 2013, 25, 576–583.
   Web of Science ®Google Scholar
• Haghighi, A. H.; Sheydaei, M.; Allahbakhsh, A.; Ghatarband, M.; Hosseini, F. S. “Thermal performance of poly(ethylene disulfide)/expanded graphite nanocomposites”, J. Therm. Anal. Calorim. 2014, 117, 525–535.
   Web of Science ®Google Scholar
• Nasrabadi, H. S.; Kalaee, M. R.; Abdouss, M.; Sheydaei, M.; Mazinani, S. “New role of layered silicates as phase transfer catalyst for in situ polymerization of poly(ethylenetetrasulfide) nanocomposite”, J. Inorg. Organomet. Polym. 2013, 23, 950–957.
   Web of Science ®Google Scholar
• Nasrabadi, H. S.; Kalaee, M. R.; Mazinani, S.; Abdouss, M.; Sedaghat, N. “Use of carbon nanotube to enhance thermal resistance of poly(ethylene tetrasulfide) via in situ polymerization method”, Polym. Plast. Technol. Eng. 2014, 53, 767–774.
   Web of Science ®Google Scholar
• Kazerouni, S. S.; Kalaee, M.; Sharif, F.; Mazinani, S. “Synthesis and characterization of poly(ethylene tetrasulfide)/graphene oxide nanocomposites by in situ polymerization method”, J. Sulfur Chem. 2016, 37, 328–339.
   Web of Science ®Google Scholar
• Kariminejad, B.; Salami-Kalajahi, M.; Roghani-Mamaqani, H.; Noparvar-Qarebagh, A. “Effect of surface chemistry of graphene and its content on the properties of ethylene dichloride- and disodium tetrasulfide-based polysulfide polymer nanocomposites”, Polym. Compos. 2017, 38, E515–E524.
   Web of Science ®Google Scholar
• Kariminejad, B.; Salami-Kalajahi, M.; Roghani-Mamaqani, H. “Thermophysical behaviour of matrix-grafted graphene/poly(ethylene tetrasulphide) nanocomposites”, RSC Adv. 2015, 5, 100369–100377.
   Web of Science ®Google Scholar
• Song, L. N.; Xiao, M.; Meng, Y. Z. “Electrically conductive nanocomposites of aromatic polydisulfide/expanded graphite”, Compos. Sci. Technol. 2006, 66, 2156–2162.
   Web of Science ®Google Scholar
• Li, Z.; Zhang, J.; Li, M.; Xing, X.; Zhang, Q. “Highly ordered macroporous–mesoporous Ce0.4Zr0.6O2 as dual-functional material in a polysulfide polymer”, Nano Res. 2018, 11, 80–88.
   Web of Science ®Google Scholar
• Abdollahi, A.; Roghani-Mamaqani, H.; Salami-Kalajahi, M.; Mousavi, A.; Razavi, B.; Shahi, S. “Preparation of organic-inorganic hybrid nanocomposites from chemically modified epoxy and novolac resins and silica-attached carbon nanotubes by sol-gel process: Investigation of thermal degradation and stability”, Prog. Org. Coat. 2018, 117, 154–165.
   Web of Science ®Google Scholar
• Ebrahimi, H.; Roghani-Mamaqani, H.; Salami-Kalajahi, M. “Preparation of carbon nanotube-containing hybrid composites from epoxy, novolac, and epoxidized novolac resins using sol–gel method”, J. Therm. Anal. Calorim. 2018, 132, 513–524.
   Web of Science ®Google Scholar
• Mousavi, A.; Roghani-Mamaqani, H.; Salami-Kalajahi, M.; Shahi, S.; Abdollahi, A. “Modification of graphene with silica nanoparticles for use in hybrid network formation from epoxy, novolac, and epoxidized novolac resins by sol-gel method: Investigation of thermal properties”, eXPRESS Polym. Lett. 2018, 12, 187–202.
   Web of Science ®Google Scholar
• Gadwal, I.; Stuparu, M. C.; Khan, A. “Homopolymer bifunctionalization through sequential thiol–epoxy and esterification reactions: An optimization, quantification, and structural elucidation study”, Polym. Chem. 2015, 6, 1393–1404.
   Web of Science ®Google Scholar
• Najafi-Shoa, S.; Roghani-Mamaqani, H.; Salami-Kalajahi, M.; Azimi, R.; Gholipour-Mahmoudalilou, M. “Incorporation of epoxy resin and carbon nanotube into silica/siloxane network for improving thermal properties”, J. Mater. Sci. 2016, 51, 9057–9073.
   Web of Science ®Google Scholar
• Abdollahi, A.; Roghani-Mamaqani, H.; Salami-Kalajahi, M.; Razavi, B.; Mousavi, A.; Shahi, S. “Preparation of hybrid composites based on epoxy, novolac, and epoxidized novolac resins and silica nanoparticles with high char residue by sol-gel method”, Polym. Compos. 2017. DOI: https://doi.org/10.1002/pc.24631.
   Google Scholar
• Ebrahimi, H.; Roghani-Mamaqani, H.; Salami-Kalajahi, M.; Shahi, S.; Abdollahi, A. “Preparation of furfuryl alcohol-functionalized carbon nanotube and epoxidized novolac resin composites with high char yield”, Polym. Compos. 2018. DOI: https://doi.org/10.1002/pc.24812.
   Web of Science ®Google Scholar
• Najafi-Shoa, S.; Roghani-Mamaqani, H.; Salami-Kalajahi, M. “Incorporation of epoxy resin and graphene nanolayers into silica xerogel network: An insight into thermal improvement of resin”, J. Sol-Gel Sci. Technol. 2016, 80, 362–377.
   Web of Science ®Google Scholar
• Nasab, M. G.; Kalaee, M. “Epoxy/graphene oxide/liquid polysulfide ternary nano-composites: Rheological, thermal and mechanical, characterization”, RSC Adv. 2016, 6, 45357–45368.
   Web of Science ®Google Scholar
• Hadavand, B. S.; Javid, K. M.; Gharagozlou, M. “Mechanical properties of multi-walled carbon nanotube/epoxy polysulfide nanocomposite”, Mater. Des. 2013, 50, 62–67.
   Web of Science ®Google Scholar
• Kochergin, Y. S.; Grigorenko, M. A.; Grigorenko, T. I.; Loyko, D. P. “Regulation of properties of epoxy–thiokol glue compositions”, Polym. Sci. Ser. D. 2013, 6, 9–13.
   Google Scholar
• Cranker, K. R.; Breslau, A. J. “Epoxy casting resins modified with polysulfide liquid polymer”, Ind. Eng. Chem. 1956, 48, 98–103.
   Google Scholar
• Singhal, R. A.; Nagpal, A. K. “Effect of polysulfide modifier on mechanical and morphological properties of epoxy/phthalic anhydride system”, Int. J. Plast. Technol. 2009, 13, 193–204.
   Google Scholar
• Singhal, R.A.; Nagpal, A. K. “Thermal and chemical resistance behavior of cured epoxy based on diglycidyl ether of bisphenol-a and thiol treated liquid polysulfide blends”, Adv. Mater. Lett. 2010, 1, 238–245.
   Google Scholar
• Wilford, A.; Lee, T. C. P.; Kemp, T. J. “Phase separation of polysulphide polymers in epoxy adhesives”, Int. J. Adhes. Adhes. 1992, 12, 171–177.
   Web of Science ®Google Scholar
• Abdouss, M.; Farajpour, T.; Derakhshani, M. “Investigating of polysulfide and epoxy-polysulfide copolymer curing”, Mater. Wiss. Werkstofftech. 2010, 41, 884–888.
   Web of Science ®Google Scholar
• Soroush, A.; Haghighat, H. R.; Sajadinia, S. H. “Thermal and mechanical properties of polysulfide/epoxy copolymer system: The effect of anhydride content”, Polym. Adv. Technol. 2014, 25, 184–190.
   Web of Science ®Google Scholar
• Kochergin, Y. S.; Grigorenko, T. I.; Grigorenko, M. A.; Lazareva, L. A. “Properties of materials effect of thiokol on properties of epoxy polymers”, Polym. Sci. Ser. D. 2011, 4, 295–300.
   Google Scholar
• Abdouss, M.; Farajpour, T.; Derakhshani, M. “The effect of epoxy-polysulfide copolymer curing methods on mechanical-dynamical and morphological properties”, Iran. J. Chem. Chem. Eng. 2011, 30, 37–44.
   Google Scholar
• Kochergin, Y. S.; Grigorenko, M. A.; Grigorenko, T. I.; Loiko, D. P. “The influence of preliminary thioetherification reaction on properties of epoxy adhesives modified by liquid thiocol”, Polym. Sci. Ser. D. 2012, 5, 67–72.
   Google Scholar
• Kochergin, Y. S.; Grigorenko, T. I. “The influence of polyoxypropylenetriamine on the properties of epoxy–thiokol mixtures”, Polym. Sci. Ser. D. 2016, 9, 33–39.
   Google Scholar
• Liu, B.; Wang, Y. “A novel design for water-based modified epoxy coating with anti-corrosive application properties”, Prog. Org. Coat. 2014, 77, 219–224.
   Web of Science ®Google Scholar
• Farajpour, T.; Bayat, Y.; Keshavarz, M.; Zanjirian, E. “Viscoelastic and thermal properties of polysulfide modified epoxy resin: The effect of modifier molecular weight”, Mater. Wiss. Werkstofftech. 2013, 44, 991–996.
   Web of Science ®Google Scholar
• Farajpour, T.; Bayat, Y.; Keshavarz, M.; Zanjirian, E. “Investigating the effect of modifier chain length on insulation properties of polysulfide modified epoxy resin”, Iran J. Chem. Chem. Eng. 2013, 33, 37–44.
   Google Scholar
• Mahmood, I. A.; Shamukh, M. Z. “Characteristics and properties of epoxy/polysulfide blend matrix reinforced by short carbon and glass fibers”, Al-Nahrain J. Eng. Sci. 2017, 20, 80–87.
   Google Scholar
• Guchhait, P. K.; Bhandari, S.; Singh, S.; Rahaman, M. “Study on the effect of nanosilica particles on morphology, thermo-mechanical and electrical properties of liquid polysulfide modified epoxy hybrid nanocomposites”, Int. J. Plast. Technol. 2011, 15, 150–162.
   Google Scholar
• Nemaa, A.; Al-Razaq, I. A.; Kader, E. E. “Characteristics and properties of epoxy/polysulfide composite materials reinforced by carbon nanotubes”, Diyala J. Eng. Sci. 2014, 7, 106–119.
   Google Scholar
• Wu, Y.; Gu, Z.; Chen, M.; Zhu, C.; Liao, H. “Effect of functionalization of multi-walled carbon nanotube on mechanical and viscoelastic properties of polysulfide-modified epoxy nanocomposites”, High Perform. Polym. 2017, 29, 151–160.
   Web of Science ®Google Scholar
• Je, S. H.; Buyukcakir, O.; Kim, D.; Coskun, A. “Direct utilization of elemental sulfur in the synthesis of microporous polymers for natural gas sweetening”, Chemistry 2016, 1, 482–493.
   Web of Science ®Google Scholar
• Kim, H.; Lee, J.; Ahn, H.; Kim, O.; Park, M. J. “Synthesis of three-dimensionally interconnected sulfur-rich polymers for cathode materials of high-rate lithium–sulfur batteries”, Nat. Commun. 2015, 6, 7278.
   PubMed Web of Science ®Google Scholar