A Review on Applicability, Limitations, and Improvements of Polymeric Materials in High-Pressure Hydrogen Gas Atmospheres

References

• Sgobbi, A.; Nijs, W.; Miglio, R. d.; Chiodi, A.; Gargiulo, M.; Thiel, C. How Far Away is Hydrogen? Its Role in the Medium and Long-Term Decarbonisation of the European Energy System. Int. J. Hydrogen Energy 2016, 41, 19–35. DOI: https://doi.org/10.1016/j.ijhydene.2015.09.004.
   Web of Science ®Google Scholar
• Fayaz, H.; Saidur, R.; Razali, N.; Anuar, F. S.; Saleman, A. R.; Islam, M. R. An Overview of Hydrogen as a Vehicle Fuel. Renewable Sustainable Energy Rev. 2012, 16, 5511–5528. DOI: https://doi.org/10.1016/j.rser.2012.06.012.
   Web of Science ®Google Scholar
• Sharma, S.; Ghoshal, S. K. Hydrogen the Future Transportation Fuel: From Production to Applications. Renewable Sustainable Energy Rev. 2015, 43, 1151–1158. DOI: https://doi.org/10.1016/j.rser.2014.11.093.
   Web of Science ®Google Scholar
• Jones, R. H.; Thomas, G. An Overview of Materials for the Hydrogen Economy. Jom 2007, 59, 50–55. DOI: https://doi.org/10.1007/s11837-007-0152-y.
   Web of Science ®Google Scholar
• Mazloomi, K.; Gomes, C. Hydrogen as an Energy Carrier: Prospects and Challenges. Renewable Sustainable Energy Rev. 2012, 16, 3024–3033. DOI: https://doi.org/10.1016/j.rser.2012.02.028.
   Web of Science ®Google Scholar
• European Commission. Hydrogen Energy and Fuel Cells: A Vision of Our Future; Office for Official Publications of the European Communities, Luxembourg, 2003.
   Google Scholar
• Ball, M.; Weeda, M. The Hydrogen Economy – Vision or Reality? Int. J. Hydrogen Energy 2015, 40, 7903–7919. DOI: https://doi.org/10.1016/j.ijhydene.2015.04.032.
   Web of Science ®Google Scholar
• Jain, I. P.; Jain, P.; Jain, A. Novel Hydrogen Storage Materials: A Review of Lightweight Complex Hydrides. J. Alloys Compd. 2010, 503, 303–339. DOI: https://doi.org/10.1016/j.jallcom.2010.04.250.
   Web of Science ®Google Scholar
• Menon, N. C.; Kruizenga, A. M.; Alvine, K. J.; San Marchi, C.; Nissen, A.; Brooks, K. Behaviour of Polymers in High Pressure Environments as Applicable to the Hydrogen Infrastructure. In Proceedings of the ASME 2016 Pressure Vessels and Piping Conference; American Society of Mechanical Engineers: New York, USA, 2016; Vol 6B, 63713. DOI: https://doi.org/10.1115/PVP2016-63713.
   Google Scholar
• Pépin, J.; Lainé, E.; Grandidier, J.-C.; Benoit, G.; Mellier, D.; Weber, M.; Langlois, C. Replication of Liner Collapse Phenomenon Observed in Hyperbaric Type IV Hydrogen Storage Vessel by Explosive Decompression Experiments. Int. J. Hydrogen Energy 2018, 43, 4671–4680. DOI: https://doi.org/10.1016/j.ijhydene.2018.01.022.
   Web of Science ®Google Scholar
• Barbir, F. Transition to Renewable Energy Systems with Hydrogen as an Energy Carrier⋆. Energy 2009, 34, 308–312. DOI: https://doi.org/10.1016/j.energy.2008.07.007.
   Web of Science ®Google Scholar
• Helen McCay, M. Hydrogen. In Future Energy: Improved, Sustainable and Clean Options for Our Planet, 2nd ed.; Letcher, T. M., Ed.; Elsevier: London, 2014; pp 495–510.
   Google Scholar
• Ball, M.; Wietschel, M. The Future of Hydrogen – Opportunities and Challenges. Int. J. Hydrogen Energy 2009, 34, 615–627. DOI: https://doi.org/10.1016/j.ijhydene.2008.11.014.
   Web of Science ®Google Scholar
• Zhang, F.; Zhao, P.; Niu, M.; Maddy, J. The Survey of Key Technologies in Hydrogen Energy Storage. Int. J. Hydrogen Energy 2016, 41, 14535–14552. DOI: https://doi.org/10.1016/j.ijhydene.2016.05.293.
   Web of Science ®Google Scholar
• Viktorsson, L.; Heinonen, J.; Skulason, J.; Unnthorsson, R. A Step towards the Hydrogen Economy—a Life Cycle Cost Analysis of a Hydrogen Refueling Station. Energies 2017, 10, 763. DOI: https://doi.org/10.3390/en10060763.
   Web of Science ®Google Scholar
• Moradi, R.; Groth, K. M. Hydrogen Storage and Delivery: Review of the State of the Art Technologies and Risk and Reliability Analysis. Int. J. Hydrogen Energy 2019, 44, 12254–12269. DOI: https://doi.org/10.1016/j.ijhydene.2019.03.041.
   Web of Science ®Google Scholar
• Kharel, S.; Shabani, B. Hydrogen as a Long-Term Large-Scale Energy Storage Solution to Support Renewables. Energies 2018, 11, 2825. DOI: https://doi.org/10.3390/en11102825.
   Web of Science ®Google Scholar
• Ali, M.; Ekström, J.; Lehtonen, M. Sizing Hydrogen Energy Storage in Consideration of Demand Response in Highly Renewable Generation Power Systems. Energies 2018, 11, 1113. DOI: https://doi.org/10.3390/en11051113.
   Web of Science ®Google Scholar
• Zhang, M.; Lv, H.; Kang, H.; Zhou, W.; Zhang, C. A Literature Review of Failure Prediction and Analysis Methods for Composite High-Pressure Hydrogen Storage Tanks. Int. J. Hydrogen Energy 2019, 44, 25777–25799. DOI: https://doi.org/10.1016/j.ijhydene.2019.08.001.
   Web of Science ®Google Scholar
• Nishimura, S. Fracture Behaviour of Ethylene Propylene Rubber for Hydrogen Gas Sealing under High-Pressure Hydrogen. Int. Polym. Sci. Technol. 2014, 41, 27–34. DOI: https://doi.org/10.1177/0307174X1404100606.
   Google Scholar
• Ozsaban, M.; Midilli, A. A Parametric Study on Exergetic Sustainability Aspects of High-Pressure Hydrogen Gas Compression. Int. J. Hydrogen Energy 2016, 41, 5321–5334. DOI: https://doi.org/10.1016/j.ijhydene.2016.01.130.
   Web of Science ®Google Scholar
• Agrinier, P.; Roizard, D.; Ruiz-Lopez, M. F.; Favre, E. Permeation Selectivity of Gaseous Isotopes through Dense Polymers: Peculiar Behavior of the Hydrogen Isotopes. J. Membr. Sci. 2008, 318, 373–378. DOI: https://doi.org/10.1016/j.memsci.2008.03.011.
   Web of Science ®Google Scholar
• Markert, F.; Marangon, A.; Carcassi, M.; Duijm, N. J. Risk and Sustainability Analysis of Complex Hydrogen Infrastructures. Int. J. Hydrogen Energy 2017, 42, 7698–7706. DOI: https://doi.org/10.1016/j.ijhydene.2016.06.058.
   Google Scholar
• Barthelemy, H.; Weber, M.; Barbier, F. Hydrogen Storage: Recent Improvements and Industrial Perspectives. Int. J. Hydrogen Energy 2017, 42, 7254–7262. DOI: https://doi.org/10.1016/j.ijhydene.2016.03.178.
   Web of Science ®Google Scholar
• Jain, I. P. Hydrogen the Fuel for 21st Century. Int. J. Hydrogen Energy 2009, 34, 7368–7378. DOI: https://doi.org/10.1016/j.ijhydene.2009.05.093.
   Web of Science ®Google Scholar
• Ahluwalia, R. K.; Hua, T. Q.; Peng, J. K. On-Board and off-Board Performance of Hydrogen Storage Options for Light-Duty Vehicles. Int. J. Hydrogen Energy 2012, 37, 2891–2910. DOI: https://doi.org/10.1016/j.ijhydene.2011.05.040.
   Google Scholar
• Yersak, T. A.; Baker, D. R.; Yanagisawa, Y.; Slavik, S.; Immel, R.; Mack-Gardner, A.; Herrmann, M.; Cai, M. Predictive Model for Depressurization-Induced Blistering of Type IV Tank Liners for Hydrogen Storage. Int. J. Hydrogen Energy 2017, 42, 28910–28917. DOI: https://doi.org/10.1016/j.ijhydene.2017.10.024.
   Web of Science ®Google Scholar
• Rivard, E.; Trudeau, M.; Zaghib, K. Hydrogen Storage for Mobility: A Review. Materials (Basel, Switzerland) 2019, 12, 1973. DOI: https://doi.org/10.3390/ma12121973.
   PubMed Web of Science ®Google Scholar
• Mori, D.; Hirose, K. Recent Challenges of Hydrogen Storage Technologies for Fuel Cell Vehicles. Int. J. Hydrogen Energy 2009, 34, 4569–4574. DOI: https://doi.org/10.1016/j.ijhydene.2008.07.115.
   Web of Science ®Google Scholar
• Kawamoto, S.; Fujiwara, H.; Nishimura, S. Hydrogen Characteristics and Ordered Structure of Mono-Mesogen Type Liquid-Crystalline Epoxy Polymer. Int. J. Hydrogen Energy 2016, 41, 7500–7510. DOI: https://doi.org/10.1016/j.ijhydene.2016.03.124.
   Web of Science ®Google Scholar
• Ono, H.; Fujiwara, H.; Nishimura, S. Penetrated Hydrogen Content and Volume Inflation in Unfilled NBR Exposed to High-Pressure Hydrogen–What Are the Characteristics of unfilled-NBR Dominating Them? Int. J. Hydrogen Energy 2018, 43, 18392–18402. DOI: https://doi.org/10.1016/j.ijhydene.2018.08.031.
   Web of Science ®Google Scholar
• Adams, P.; Bengaouer, A.; Cariteau, B.; Molkov, V.; Venetsanos, A. G. Allowable Hydrogen Permeation Rate from Road Vehicles. Int. J. Hydrogen Energy 2011, 36, 2742–2749. DOI: https://doi.org/10.1016/j.ijhydene.2010.04.161.
   Web of Science ®Google Scholar
• Sakamoto, J.; Sato, R.; Nakayama, J.; Kasai, N.; Shibutani, T.; Miyake, A. Leakage-Type-Based Analysis of Accidents Involving Hydrogen Fueling Stations in Japan and USA. Int. J. Hydrogen Energy 2016, 41, 21564–21570. DOI: https://doi.org/10.1016/j.ijhydene.2016.08.060.
   Google Scholar
• Louthan, M. R.; Caskey, G. R.; Donovan, J. A.; Rawl, D. E. Hydrogen Embrittlement of Metals. Mater. Sci. Eng. 1972, 10, 357–368. DOI: https://doi.org/10.1016/0025-5416(72)90109-7.
   Google Scholar
• Castagnet, S.; Grandidier, J.-C.; Comyn, M.; Benoît, G. Effect of Long-Term Hydrogen Exposure on the Mechanical Properties of Polymers Used for Pipes and Tested in Pressurized Hydrogen. Int. J. Press. Vessels Pip. 2012, 89, 203–209. DOI: https://doi.org/10.1016/j.ijpvp.2011.11.008.
   Web of Science ®Google Scholar
• Barth, R. R.; Simmons, K. L.; San Marchi, C. W. Polymers for Hydrogen Infrastructure and Vehicle Fuel Systems: Applications, Properties, and Gap Analysis; Pacific North West National Laboratory (U.S.), Richland, WA and Sandia National Laboratories, Livermore, CA, 2013.
   Google Scholar
• Murakami, Y.; Kanezaki, T.; Mine, Y.; Matsuoka, S. Hydrogen Embrittlement Mechanism in Fatigue of Austenitic Stainless Steels. Metall. Mat. Trans. A 2008, 39, 1327–1339. DOI: https://doi.org/10.1007/s11661-008-9506-5.
   Google Scholar
• Yamabe, J.; Nishimura, S. Hydrogen-Induced Degradation of Rubber Seals. In Gaseous Hydrogen Embrittlement of Materials in Energy Technologies; Gangloff, R. P., Somerday, B. P., Eds.; Elsevier: Cambridge, UK, 2012; pp 769–816.
   Google Scholar
• Somerday, B. P.; Campbell, J. A.; Lee, K. L.; Ronevich, J. A.; San Marchi, C. Enhancing Safety of Hydrogen Containment Components through Materials Testing under in-Service Conditions. Int. J. Hydrogen Energy 2017, 42, 7314–7321. DOI: https://doi.org/10.1016/j.ijhydene.2016.04.189.
   Web of Science ®Google Scholar
• Sun, Y.; Lv, H.; Zhou, W.; Zhang, C. Research on Hydrogen Permeability of Polyamide 6 as the Liner Material for Type IV Hydrogen Storage Tank. Int. J. Hydrogen Energy 2020, 45, 24980–24990. DOI: https://doi.org/10.1016/j.ijhydene.2020.06.174.
   Web of Science ®Google Scholar
• Honselaar, M.; Pasaoglu, G.; Martens, A. Hydrogen Refuelling Stations in The Netherlands: An Intercomparison of Quantitative Risk Assessments Used for Permitting. Int. J. Hydrogen Energy 2018, 43, 12278–12294. DOI: https://doi.org/10.1016/j.ijhydene.2018.04.111.
   Web of Science ®Google Scholar
• Li, M.; Bai, Y.; Zhang, C.; Song, Y.; Jiang, S.; Grouset, D.; Zhang, M. Review on the Research of Hydrogen Storage System Fast Refueling in Fuel Cell Vehicle. Int. J. Hydrogen Energy 2019, 44, 10677–10693. DOI: https://doi.org/10.1016/j.ijhydene.2019.02.208.
   Web of Science ®Google Scholar
• Reddi, K.; Elgowainy, A.; Sutherland, E. Hydrogen Refueling Station Compression and Storage Optimization with Tube-Trailer Deliveries. Int. J. Hydrogen Energy 2014, 39, 19169–19181. DOI: https://doi.org/10.1016/j.ijhydene.2014.09.099.
   Web of Science ®Google Scholar
• Chen, F-q.; Zhang, M.; Qian, J-y.; Chen, L-l.; Jin, Z-j. Pressure Analysis on Two-Step High Pressure Reducing System for Hydrogen Fuel Cell Electric Vehicle. Int. J. Hydrogen Energy 2017, 42, 11541–11552. DOI: https://doi.org/10.1016/j.ijhydene.2017.02.077.
   Web of Science ®Google Scholar
• Kim, R.-W.; Hwang, K.-H.; Kim, S.-R.; Lee, J.-H. Investigation of Ultra-High Pressure Gas Control System for Hydrogen Vehicles. Energies 2020, 13, 2446. DOI: https://doi.org/10.3390/en13102446.
   Web of Science ®Google Scholar
• Jin, Z-j.; Chen, F.; Q.; Qian, J-y.; Zhang, M.; Chen, L-l.; Wang, F.; Fei, Y. Numerical Analysis of Flow and Temperature Characteristics in a High Multi-Stage Pressure Reducing Valve for Hydrogen Refueling Station. Int. J. Hydrogen Energy 2016, 41, 5559–5570. DOI: https://doi.org/10.1016/j.ijhydene.2016.02.013.
   Web of Science ®Google Scholar
• Jin, Z-j.; Gao, Z-x.; Chen, M.; R.; Qian, J-y. Parametric Study on Tesla Valve with Reverse Flow for Hydrogen Decompression. Int. J. Hydrogen Energy 2018, 43, 8888–8896. DOI: https://doi.org/10.1016/j.ijhydene.2018.03.014.
   Web of Science ®Google Scholar
• Fujiwara, H.; Ono, H.; Onoue, K.; Nishimura, S. High-Pressure Gaseous Hydrogen Permeation Test Method -Property of Polymeric Materials for High-Pressure Hydrogen Devices (1). Int. J. Hydrogen Energy 2020, 45, 29082–29094. DOI: https://doi.org/10.1016/j.ijhydene.2020.07.215.
   Web of Science ®Google Scholar
• Jung, J. K.; Jeon, S. K.; Kim, K.-T.; Lee, C. H.; Baek, U. B.; Chung, K. S. Impedance Spectroscopy for in Situ and Real-Time Observations of the Effects of Hydrogen on Nitrile Butadiene Rubber Polymer under High Pressure. Sci. Rep. 2019, 9, 13035. DOI: https://doi.org/10.1038/s41598-019-49692-y.
   PubMed Web of Science ®Google Scholar
• Nishimura, S.; Fujiwara, H. Detection of Hydrogen Dissolved in Acrylonitrile Butadiene Rubber by 1H Nuclear Magnetic Resonance. Chem. Phys. Lett. 2012, 522, 43–45. DOI: https://doi.org/10.1016/j.cplett.2011.11.080.
   Web of Science ®Google Scholar
• Aibada, N.; Ramachandran, M.; Gupta, K. K.; Raichurkar, P. P. Review on Various Gaskets Based on the Materials, Their Characteristics and Applications. Int. J. Text. Eng. Proces. 2017, 3, 12–18.
   Google Scholar
• Yu, W.; Dianbo, X.; Jianmei, F.; Xueyuan, P. Research on Sealing Performance and Self-Acting Valve Reliability in High-Pressure Oil-Free Hydrogen Compressors for Hydrogen Refueling Stations. Int. J. Hydrogen Energy 2010, 35, 8063–8070. DOI: https://doi.org/10.1016/j.ijhydene.2010.01.089.
   Web of Science ®Google Scholar
• Fujiwara, H. Analysis of Acrylonitrile Butadiene Rubber (NBR) Expanded with Penetrated Hydrogen Due to High Pressure Hydrogen Exposure. Int. Polym. Sci. Technol. 2017, 44, 41–48. DOI: https://doi.org/10.1177/0307174X1704400308.
   Google Scholar
• Yamabe, J.; Nishimura, S.; Koga, A. A Study on Sealing Behavior of Rubber O-Ring in High Pressure Hydrogen Gas. SAE Int. J. Mater. Manuf. 2009, 2, 452–460. DOI: https://doi.org/10.4271/2009-01-0999.
   Google Scholar
• Fujiwara, H.; Ono, H.; Nishimura, S. Degradation Behavior of Acrylonitrile Butadiene Rubber after Cyclic High-Pressure Hydrogen Exposure. Int. J. Hydrogen Energy 2015, 40, 2025–2034. DOI: https://doi.org/10.1016/j.ijhydene.2014.11.106.
   Web of Science ®Google Scholar
• Castagnet, S.; Ono, H.; Benoit, G.; Fujiwara, H.; Nishimura, S. Swelling Measurement during Sorption and Decompression in a NBR Exposed to High-Pressure Hydrogen. Int. J. Hydrogen Energy 2017, 42, 19359–19366. DOI: https://doi.org/10.1016/j.ijhydene.2017.06.138.
   Web of Science ®Google Scholar
• Schrittesser, B.; Pinter, G.; Schwarz, T.; Kadar, Z.; Nagy, T. Rapid Gas Decompression Performance of Elastomers – a Study of Influencing Testing Parameters. Proc. Struct. Integrity 2016, 2, 1746–1754. DOI: https://doi.org/10.1016/j.prostr.2016.06.220.
   Google Scholar
• Yamabe, J.; Nishimura, S. Influence of Carbon Black on Decompression Failure and Hydrogen Permeation Properties of Filled Ethylene-Propylene-Diene-Methylene Rubbers Exposed to High-Pressure Hydrogen Gas. J. Appl. Polym. Sci. 2011, 122, 3172–3187. DOI: https://doi.org/10.1002/app.34344.
   Web of Science ®Google Scholar
• Briscoe, B. J.; Savvas, T.; Kelly, C. T. Explosive Decompression Failure” of Rubbers: A Review of the Origins of Pneumatic Stress Induced Rupture in Elastomers. Rubber Chem. Technol. 1994, 67, 384–416. DOI: https://doi.org/10.5254/1.3538683.
   Web of Science ®Google Scholar
• Ono, H.; Nait-Ali, A.; Kane Diallo, O.; Benoit, G.; Castagnet, S. Influence of Pressure Cycling on Damage Evolution in an Unfilled EPDM Exposed to High-Pressure Hydrogen. Int. J. Fract. 2018, 210, 137–152. DOI: https://doi.org/10.1007/s10704-018-0266-y.
   Web of Science ®Google Scholar
• Jaravel, J.; Castagnet, S.; Grandidier, J.-C.; Benoît, G. On Key Parameters Influencing Cavitation Damage upon Fast Decompression in a Hydrogen Saturated Elastomer. Polym. Test. 2011, 30, 811–818. DOI: https://doi.org/10.1016/j.polymertesting.2011.08.003.
   Web of Science ®Google Scholar
• Embury, P. High-Pressure Gas Testing of Elastomer Seals and a Practical Approach to Designing for Explosive Decompression Service. Sealing Technol. 2004, 2004, 6–11. DOI: https://doi.org/10.1016/S1350-4789(04)00231-4.
   Google Scholar
• Koga, A.; Yamabe, T.; Sato, H.; Uchida, K.; Nakayama, J.; Yamabe, J.; Nishimura, S. A Visualizing Study of Blister Initiation Behavior by Gas Decompression. Tribol. Online 2013, 8, 68–75. DOI: https://doi.org/10.2474/trol.8.68.
   Google Scholar
• Gent, A. N.; Tompkins, D. A. Nucleation and Growth of Gas Bubbles in Elastomers. J. Appl. Phys. 1969, 40, 2520–2525. DOI: https://doi.org/10.1063/1.1658026.
   Web of Science ®Google Scholar
• Denecour, R. L.; Gent, A. N. Bubble Formation in Vulcanized Rubbers. J. Polym. Sci. A-2 Polym. Phys. 1968, 6, 1853–1861. DOI: https://doi.org/10.1002/pol.1968.160061103.
   Web of Science ®Google Scholar
• Schrittesser, B. Performance of Elastomers for High-Pressure Applications. Doctoral thesis, Institute of Materials Science and Testing of Polymers, Montan University Leoben, Leoben, Austria, Aug 2014.
   Google Scholar
• Dewimille, B.; Martin, J.; Jarrin, J. Behaviour of Thermoplastic Polymers during Explosive Decompressions in a Petroleum Environment. J. Phys. IV. France 1993, 3, C7-1559–C7-1564. DOI: https://doi.org/10.1051/jp4:19937243.
   Google Scholar
• Pepin, J.; Lainé, E.; Grandidier, J.-C.; Castagnet, S.; Blanc-Vannet, P.; Papin, P.; Weber, M. Determination of Key Parameters Responsible for Polymeric Liner Collapse in Hyperbaric Type IV Hydrogen Storage Vessels. Int. J. Hydrogen Energy 2018, 43, 16386–16399. DOI: https://doi.org/10.1016/j.ijhydene.2018.06.177.
   Web of Science ®Google Scholar
• Rueda, F.; Torres, J. P.; Machado, M.; Frontini, P. M.; Otegui, J. L. External Pressure Induced Buckling Collapse of High-Density Polyethylene (HDPE) Liners: FEM Modeling and Predictions. Thin-Walled Structures 2015, 96, 56–63. DOI: https://doi.org/10.1016/j.tws.2015.04.035.
   Web of Science ®Google Scholar
• Balasooriya, W. Aging and Long-Term Performance of Elastomers for Utilization in Harsh Environments. Doctoral thesis, Institute of Materials Science and Testing of Polymers, Montan University Leoben, Leoben, Austria, May, 2019.
   Google Scholar
• Campion, R. P.; Lewis, J. A.; Thomson, B. Elastomers for Fluid Containment in Offshore Oil and Gas Production: Guidelines and Review; Campion, R. P., Thomson, B., Lewis, J. A.; [prepared by MERL Ltd for the Health and Safety Executive]; HSE Books: Sudbury, 2005.
   Google Scholar
• Yamabe, J.; Koga, A.; Nishimura, S. Failure Behavior of Rubber O-Ring under Cyclic Exposure to High-Pressure Hydrogen Gas. Eng. Fail. Anal. 2013, 35, 193–205. DOI: https://doi.org/10.1016/j.engfailanal.2013.01.034.
   Web of Science ®Google Scholar
• Castagnet, S.; Grandidier, J.-C.; Comyn, M.; Benoît, G. Hydrogen Influence on the Tensile Properties of Mono and Multi-Layer Polymers for Gas Distribution. Int. J. Hydrogen Energy 2010, 35, 7633–7640. DOI: https://doi.org/10.1016/j.ijhydene.2010.04.155.
   Web of Science ®Google Scholar
• Klopffer, M.-H.; Berne, P.; Espuche, É. Development of Innovating Materials for Distributing Mixtures of Hydrogen and Natural Gas. Study of the Barrier Properties and Durability of Polymer Pipes. Oil Gas Sci. Technol. – Rev. IFP Energies Nouvelles 2015, 70, 305–315. DOI: https://doi.org/10.2516/ogst/2014008.
   Google Scholar
• Boyer, S. A. E.; Gerland, M.; Castagnet, S. Gas Environment Effect on Cavitation Damage in Stretched Polyvinylidene Fluoride. Polym. Eng. Sci. 2014, 54, 2139–2146. DOI: https://doi.org/10.1002/pen.23759.
   Web of Science ®Google Scholar
• Balasooriya, W.; Schrittesser, B.; Pinter, G.; Schwarz, T. Induced Material Degradation of Elastomers in Harsh Environments. Polym. Test. 2018, 69, 107–115. DOI: https://doi.org/10.1016/j.polymertesting.2018.05.016.
   Web of Science ®Google Scholar
• Yamabe, J.; Nishimura, S. Influence of Fillers on Hydrogen Penetration Properties and Blister Fracture of Rubber Composites for O-Ring Exposed to High-Pressure Hydrogen Gas. Int. J. Hydrogen Energy 2009, 34, 1977–1989. DOI: https://doi.org/10.1016/j.ijhydene.2008.11.105.
   Web of Science ®Google Scholar
• Davies, O. M.; Arnold, J. C.; Sulley, S. The Mechanical Properties of Elastomers in High-Pressure CO2. J. Mater. Sci. 1999, 34, 417–422. DOI: https://doi.org/10.1023/A:1004442614090.
   Google Scholar
• Ono, H.; Fujiwara, H.; Onoue, K.; Nishimura, S. Influence of Repetitions of the High-Pressure Hydrogen Gas Exposure on the Internal Damage Quantity of High-Density Polyethylene Evaluated by Transmitted Light Digital Image. Int. J. Hydrogen Energy 2019, 44, 23303–23319. DOI: https://doi.org/10.1016/j.ijhydene.2019.07.035.
   Web of Science ®Google Scholar
• Yamabe, J.; Fujiwara, H.; Nishimura, S. Fracture Analysis of Rubber Sealing Material for High Pressure Hydrogen Vessel. J. Environ. Eng. 2011, 6, 53–68. DOI: https://doi.org/10.1299/jee.6.53.
   Google Scholar
• Koga, A.; Nakayama, J.; Tokumitsu, H.; Otsuka, M.; Yamabe, J.; Nishimura, S. A Study on Blister Damages of Rubber o-Ring by High-Pressure Hydrogen Durability Tester. In Effects of Hydrogen on Materials: Proceedings of the 2008 International Hydrogen Conference, Sep 7–10, 2008, Jackson Lake Lodge, Grand Teton National Park, WY; Somerday, B., Sofronis, P., Jones, R. H., Eds.; ASM International: Materials Park, OH, 2009; pp 397–404.
   Google Scholar
• Kane-Diallo, O.; Castagnet, S.; Nait-Ali, A.; Benoit, G.; Grandidier, J.-C. Time-Resolved Statistics of Cavity Fields Nucleated in a Gas-Exposed Rubber under Variable Decompression Conditions – Support to a Relevant Modeling Framework. Polym. Test. 2016, 51, 122–130. DOI: https://doi.org/10.1016/j.polymertesting.2016.03.004.
   Web of Science ®Google Scholar
• Castagnet, S.; Mellier, D.; Nait-Ali, A.; Benoit, G. In-Situ X-Ray Computed Tomography of Decompression Failure in a Rubber Exposed to High-Pressure Gas. Polym. Test. 2018, 70, 255–262. DOI: https://doi.org/10.1016/j.polymertesting.2018.07.017.
   Web of Science ®Google Scholar
• Koga, A.; Uchida, K.; Yamabe, J.; Nishimura, S. Evaluation on High-Pressure Hydrogen Decompression Failure of Rubber O-Ring Using Design of Experiments. Int. J. Automot. Eng. 2011, 2, 123–129. DOI: https://doi.org/10.20485/jsaeijae.2.4_123.
   Google Scholar
• Yamabe, J.; Nishimura, S. Tensile Properties and Swelling Behavior of Sealing Rubber Materials Exposed to High-Pressure Hydrogen Gas. J. Solid Mech. Mater. Eng. 2012, 6, 466–477. DOI: https://doi.org/10.1299/jmmp.6.466.
   Google Scholar
• Yamabe, J.; Nishimura, S.; Nakao, M.; Fujiwara, H. Blister Fracture of Rubbers for O-Ring Exposed to High Pressure Hydrogen Gas. In Effects of Hydrogen on Materials: Proceedings of the 2008 International Hydrogen Conference, Sep 7–10, 2008, Jackson Lake Lodge, Grand Teton National Park, WY; Somerday, B., Sofronis, P., Jones, R. H., Eds.; ASM International: Materials Park, OH, 2009; pp 389–396.
   Google Scholar
• Balasooriya, W.; Schrittesser, B.; Pinter, G.; Schwarz, T.; Conzatti, L. The Effect of the Surface Area of Carbon Black Grades on HNBR in Harsh Environments. Polymers 2019, 11, 61. DOI: https://doi.org/10.3390/polym11010061.
   Web of Science ®Google Scholar
• Yamabe, J.; Nishimura, S. Nanoscale Fracture Analysis by Atomic Force Microscopy of EPDM Rubber Due to High-Pressure Hydrogen Decompression. J. Mater. Sci. 2011, 46, 2300–2307. DOI: https://doi.org/10.1007/s10853-010-5073-4.
   Web of Science ®Google Scholar
• Yamabe, J.; Nishimura, S. 2010 Estimation of Critical Pressure of Decompression Failure of EPDM Composites for Sealing under High-Pressure Hydrogen Gas. In 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, Dresden, Germany.
   Google Scholar
• Yamabe, J.; Matsumoto, T.; Nishimura, S. Application of Acoustic Emission Method to Detection of Internal Fracture of Sealing Rubber Material by High-Pressure Hydrogen Decompression. Polym. Test. 2011, 30, 76–85. DOI: https://doi.org/10.1016/j.polymertesting.2010.11.002.
   Web of Science ®Google Scholar
• Gent, A. N.; Lindley, P. B. Internal Rupture of Bonded Rubber Cylinders in Tension. Proc. R. Soc. Lond. A 1959, 249, 195–205. DOI: https://doi.org/10.1098/rspa.1959.0016.
   Web of Science ®Google Scholar
• Diani, J. Irreversible Growth of a Spherical Cavity in Rubber-like Material: A Fracture Mechanics Description. Int. J. Fract. 2001, 112, 151–161. DOI: https://doi.org/10.1023/A:1013311526076.
   Web of Science ®Google Scholar
• Hang-Sheng, H.; Abeyaratne, R. Cavitation in Elastic and Elastic-Plastic Solids. J. Mech. Phys. Solids 1992, 40, 571–592. DOI: https://doi.org/10.1016/0022-5096(92)80004-A.
   Web of Science ®Google Scholar
• Jaravel, J.; Castagnet, S.; Grandidier, J.-C.; Gueguen, M. Experimental Real-Time Tracking and Diffusion/Mechanics Numerical Simulation of Cavitation in Gas-Saturated Elastomers. Int. J. Solids Struct. 2013, 50, 1314–1324. DOI: https://doi.org/10.1016/j.ijsolstr.2013.01.001.
   Web of Science ®Google Scholar
• Ono, H.; Fujiwara, H.; Onoue, K.; Nishimura, S. FT-IR Study of State of Molecular Hydrogen in Bisphenol a Polycarbonate Dissolved by High-Pressure Hydrogen Gas Exposure. Chem. Phys. Lett. 2020, 740, 137053. DOI: https://doi.org/10.1016/j.cplett.2019.137053.
   Web of Science ®Google Scholar
• Fujiwara, H.; Nishimura, S. Evaluation of Hydrogen Dissolved in Rubber Materials under High-Pressure Exposure Using Nuclear Magnetic Resonance. Polym. J. 2012, 44, 832–837. DOI: https://doi.org/10.1038/pj.2012.111.
   Web of Science ®Google Scholar
• Simmons, K. L.; Kuang, W.; Burton, S. D.; Arey, B. W.; Shin, Y.; Menon, N. C.; Smith, D. B. H-Mat Hydrogen Compatibility of Polymers and Elastomers. Int. J. Hydrogen Energy 2020, DOI: https://doi.org/10.1016/j.ijhydene.2020.06.218.
   Google Scholar
• Ohyama, K.; Fujiwara, H.; Nishimura, S. Inhomogeneity in Acrylonitrile Butadiene Rubber during Hydrogen Elimination Investigated by Small-Angle X-Ray Scattering. Int. J. Hydrogen Energy 2018, 43, 1012–1024. DOI: https://doi.org/10.1016/j.ijhydene.2017.10.162.
   Web of Science ®Google Scholar
• Melnichuk, M.; Thiébaud, F.; Perreux, D. Non-Dimensional Assessments to Estimate Decompression Failure in Polymers for Hydrogen Systems. Int. J. Hydrogen Energy 2020, 45, 6738–6744. DOI: https://doi.org/10.1016/j.ijhydene.2019.12.107.
   Web of Science ®Google Scholar
• Alkire, J. D.; Mason, J. F. Effect of Rapid Decompression Conditions on Liner Materials; NACE International: Orlando, FL, 2000; p 10.
   Google Scholar
• Blanc-Vannet, P.; Papin, P.; Weber, M.; Renault, P.; Pepin, J.; Lainé, E.; Tantchou, G.; Castagnet, S.; Grandidier, J. C. Sample Scale Testing Method to Prevent Collapse of Plastic Liners in Composite Pressure Vessels. Int. J. Hydrogen Energy 2019, 44, 8682–8691. DOI: https://doi.org/10.1016/j.ijhydene.2018.10.031.
   Web of Science ®Google Scholar
• Rueda, F.; Otegui, J. L.; Frontini, P. Numerical Tool to Model Collapse of Polymeric Liners in Pipelines. Eng. Fail. Anal. 2012, 20, 25–34. DOI: https://doi.org/10.1016/j.engfailanal.2011.10.003.
   Web of Science ®Google Scholar
• Rueda, F.; Marquez, A.; Otegui, J. L.; Frontini, P. M. Buckling Collapse of HDPE Liners: Experimental Set-up and FEM Simulations. Thin-Walled Struct. 2016, 109, 103–112. DOI: https://doi.org/10.1016/j.tws.2016.09.011.
   Web of Science ®Google Scholar
• Baldwin, D. Development of High Pressure Hydrogen Storage Tank for Storage and Gaseous Truck Delivery; No. DOE-HEXAGON-GO18062. Hexagon Lincoln LLC, Lincoln, NE, 2017.
   Google Scholar
• Gerland, M.; Boyer, S. A. E.; Castagnet, S. Early Stages of Cavitation in a Stretched and Decompressed Poly(Vinylidene Fluoride) Exposed to Diffusive Hydrogen, Observed by Transmission Electronic Microscopy at the Nanoscale. Int. J. Hydrogen Energy 2016, 41, 1766–1774. DOI: https://doi.org/10.1016/j.ijhydene.2015.11.015.
   Web of Science ®Google Scholar
• Windslow, R. J.; Busfield, J. J. C. Viscoelastic Modeling of Extrusion Damage in Elastomer Seals. Soft Mater. 2019, 17, 228–240. DOI: https://doi.org/10.1080/1539445X.2019.1575238.
   Web of Science ®Google Scholar
• Zhou, C.; Zheng, J.; Gu, C.; Zhao, Y.; Liu, P. Sealing Performance Analysis of Rubber O-Ring in High-Pressure Gaseous Hydrogen Based on Finite Element Method. Int. J. Hydrogen Energy 2017, 42, 11996–12004. DOI: https://doi.org/10.1016/j.ijhydene.2017.03.039.
   Google Scholar
• Zhou, C.; He, M.; Chen, G.; Jiang, S. Numerical Study on Sealing Characteristic of Rubber X-Ring Exposed to High-Pressure Hydrogen by considering Swelling Effect. Ind. Lubr. Tribol. 2019, 71, 133–138. DOI: https://doi.org/10.1108/ILT-02-2018-0067.
   Web of Science ®Google Scholar
• Zhou, C.; Chen, G.; Liu, P. Finite Element Analysis of Sealing Performance of Rubber D-Ring Seal in High-Pressure Hydrogen Storage Vessel. J. Fail. Anal. And Preven. 2018, 18, 846–855. DOI: https://doi.org/10.1007/s11668-018-0472-y.
   Web of Science ®Google Scholar
• Balasooriya, W.; Schrittesser, B.; Karunakaran, S.; Schlögl, S.; Pinter, G.; Schwarz, T.; Kadar, Z. Influence of Thermo-Oxidative Ageing of HNBR in Oil Field Applications. Macromol. Symp. 2017, 373, 1600093. DOI: https://doi.org/10.1002/masy.201600093.
   Google Scholar
• Fujiwara, H.; Yamabe, J.; Nishimura, S. Evaluation of the Change in Chemical Structure of Acrylonitrile Butadiene Rubber after High-Pressure Hydrogen Exposure. Int. J. Hydrogen Energy 2012, 37, 8729–8733. DOI: https://doi.org/10.1016/j.ijhydene.2012.02.084.
   Web of Science ®Google Scholar
• Balasooriya, W.; Schrittesser, B.; Pinter, G.; Schwarz, T. Influence of HNBR Ageing in Oil Field Applications. J. Rubber Fiber Plast. Int. 2017, 4, 250–257.
   Google Scholar
• Haroonabadi, L.; Dashti, A.; Najipour, M. Investigation of the Effect of Thermal Aging on Rapid Gas Decompression (RGD) Resistance of Nitrile Rubber. Polym. Test. 2018, 67, 37–45. DOI: https://doi.org/10.1016/j.polymertesting.2018.02.014.
   Web of Science ®Google Scholar
• Najipoor, M.; Haroonabadi, L.; Dashti, A. Assessment of Failures of Nitrile Rubber Vulcanizates in Rapid Gas Decompression (RGD) Testing: Effect of Physico-Mechanical Properties. Polym. Test. 2018, 72, 377–385. DOI: https://doi.org/10.1016/j.polymertesting.2018.11.002.
   Web of Science ®Google Scholar
• Bhattacharjee, S.; Bhowmick, A. K.; Avasthi, B. N. High-Pressure Hydrogenation of Nitrile Rubber: Thermodynamics and Kinetics. Ind. Eng. Chem. Res. 1991, 30, 1086–1092. DOI: https://doi.org/10.1021/ie00054a003.
   Web of Science ®Google Scholar
• Yamabe, J.; Nishimura, S. Crack Growth Behavior of Sealing Rubber under Static Strain in High-Pressure Hydrogen Gas. J. Solid Mech. Mater. Eng. 2011, 5, 690–701. DOI: https://doi.org/10.1299/jmmp.5.690.
   Google Scholar
• Castagnet, S.; Grandidier, J.-C.; Comyn, M.; Benoît, G. Mechanical Testing of Polymers in Pressurized Hydrogen: Tension, Creep and Ductile Fracture. Exp. Mech. 2012, 52, 229–239. DOI: https://doi.org/10.1007/s11340-011-9484-1.
   Web of Science ®Google Scholar
• Alvine, K. J.; Kafentzis, T. A.; Pitman, S. G.; Johnson, K. I.; Skorski, D.; Tucker, J. C.; Roosendaal, T. J.; Dahl, M. E. An in Situ Tensile Test Apparatus for Polymers in High Pressure hydrogen. Rev. Sci. Instrum. 2014, 85, 105110 DOI: https://doi.org/10.1063/1.4899315.
   PubMed Web of Science ®Google Scholar
• Balasooriya, W.; Schrittesser, B.; Wang, C.; Hausberger, A.; Pinter, G.; Schwarz, T. Tribological Behavior of HNBR in Oil and Gas Field Applications. Lubricants 2018, 6, 20. DOI: https://doi.org/10.3390/lubricants6010020.
   Web of Science ®Google Scholar
• Duranty, E. R.; Roosendaal, T. J.; Pitman, S. G.; Tucker, J. C.; Owsley, S. L.; Suter, J. D.; Alvine, K. J. In Situ High Pressure Hydrogen Tribological Testing of Common Polymer Materials Used in the Hydrogen Delivery Infrastructure. J. Visualized Exp. 2018, 133, 56884. DOI: https://doi.org/10.3791/56884.
   Google Scholar
• Duranty, E. R.; Roosendaal, T. J.; Pitman, S. G.; Tucker, J. C.; Owsley, S. L.; Suter, J. D.; Alvine, K. J. An in Situ Tribometer for Measuring Friction and Wear of Polymers in a High Pressure Hydrogen Environment. Rev. Sci. Instrum. 2017, 88, 095114. DOI: https://doi.org/10.1063/1.5001836.
   PubMed Web of Science ®Google Scholar
• Duranty, A.; Roosendaal, P.; Simmons, B. Preliminary Test Methodology for Linear Reciprocating Ball-on-Flat In situ Friction and Wear Studies of Preliminary Test Methodology for Linear Reciprocating Ball-on-Flat In-situ Friction and Wear Studies of Polymers in High Pressure Hydrogen; Pacific North west National Labortary, Richland, WA, 2016.
   Google Scholar
• Kuang, W.; Bennett, W. D.; Roosendaal, T. J.; Arey, B. W.; Dohnalkova, A.; Petrossian, G.; Simmons, K. L. In Situ Friction and Wear Behavior of Rubber Materials Incorporating Various Fillers and/or a Plasticizer in High-Pressure Hydrogen. Tribol. Int. 2021, 153, 106627. DOI: https://doi.org/10.1016/j.triboint.2020.106627.
   Web of Science ®Google Scholar
• Sawae, Y.; Fukuda, K.; Miyakoshi, E.; Doi, S.; Watanabe, H.; Nakashima, K.; Sugimura, J. Tribological Characterization of Polymeric Sealing Materials in High-Pressure Hydrogen Gas. In STLE/ASME 2010 International Joint Tribology Conference; ASMEDC, 2010; pp 251–253. DOI: https://doi.org/10.1115/IJTC2010-41238.
   Google Scholar
• Sawae, Y.; Nakashima, K.; Doi, S.; Murakami, T.; Sugimura, J. Effects of High Pressure Hydrogen on Wear of PTFE and PTFE Composite. In ASME/STLE 2009 International Joint Tribology Conference; ASMEDC, 2009; pp 233–235.
   Google Scholar
• Sawae, Y.; Miyakoshi, E.; Doi, S.; Watanabe, H.; Kurono, Y.; Sugimura, J. Friction and Wear of Bronze Filled PTFE and Graphite Filled PTFE in 40 MPa Hydrogen Gas. In ASME/STLE 2011 Joint Tribology Conference; ASMEDC, 2011; pp 249–251.
   Google Scholar
• Nakashima, K.; Morillo, C.; Kurono, Y.; Sawae, Y.; Sugimura, J. Wear Mechanisms of PTFE in Humidified Hydrogen Gas. In ASME/STLE 2011 Joint Tribology Conference; ASMEDC, 2011; pp 229–231. DOI: https://doi.org/10.1115/IJTC2011-61180.
   Google Scholar
• Nakashima, K.; Yamaguchi, A.; Kurono, Y.; Sawae, Y.; Murakami, T.; Sugimura, J. Effect of High-Pressure Hydrogen Exposure on Wear of Polytetrafluoroethylene Sliding against Stainless Steel. Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol. 2010, 224, 285–292. DOI: https://doi.org/10.1243/13506501JET642.
   Web of Science ®Google Scholar
• Theiler, G.; Gradt, T. Tribological Characteristics of Polyimide Composites in Hydrogen Environment. Tribol. Int. 2015, 92, 162–171. DOI: https://doi.org/10.1016/j.triboint.2015.06.001.
   Web of Science ®Google Scholar
• Theiler, G.; Gradt, T. Environmental Effects on the Sliding Behaviour of PEEK Composites. Wear 2016, 368–369, 278–286. DOI: https://doi.org/10.1016/j.wear.2016.09.019.
   Web of Science ®Google Scholar
• Zhou, C.; Chen, G.; Xiao, S.; Hua, Z.; Gu, C. Study on Fretting Behavior of Rubber O-Ring Seal in High-Pressure Gaseous Hydrogen. Int. J. Hydrogen Energy 2019, 44, 22569–22575. DOI: https://doi.org/10.1016/j.ijhydene.2019.02.224.
   Google Scholar
• George, S. C.; Thomas, S. Transport Phenomena through Polymeric Systems. Prog. Polym. Sci. 2001, 26, 985–1017. DOI: https://doi.org/10.1016/S0079-6700(00)00036-8.
   Web of Science ®Google Scholar
• Lagaron, J. M.; Catalá, R.; Gavara, R. Structural Characteristics Defining High Barrier Properties in Polymeric Materials. Mater. Sci. Technol. 2004, 20, 1–7. DOI: https://doi.org/10.1179/026708304225010442.
   Web of Science ®Google Scholar
• Choudalakis, G.; Gotsis, A. D. Permeability of Polymer/Clay Nanocomposites: A Review. Eur. Polym. J. 2009, 45, 967–984. DOI: https://doi.org/10.1016/j.eurpolymj.2009.01.027.
   Web of Science ®Google Scholar
• Bandyopadhyay, P.; Nguyen, T. T.; Li, X.; Kim, N. H.; Lee, J. H. Enhanced Hydrogen Gas Barrier Performance of Diaminoalkane Functionalized Stitched Graphene Oxide/Polyurethane Composites. Compos. Part B: Eng. 2017, 117, 101–110. DOI: https://doi.org/10.1016/j.compositesb.2017.02.035.
   Web of Science ®Google Scholar
• Compton, O. C.; Kim, S.; Pierre, C.; Torkelson, J. M.; Nguyen, S. T. Crumpled Graphene Nanosheets as Highly Effective Barrier Property enhancers. Adv. Mater. 2010, 22, 4759–4763. DOI: https://doi.org/10.1002/adma.201000960.
   PubMed Web of Science ®Google Scholar
• Kuilla, T.; Bhadra, S.; Yao, D.; Kim, N. H.; Bose, S.; Lee, J. H. Recent Advances in Graphene Based Polymer Composites. Prog. Polym. Sci. 2010, 35, 1350–1375. DOI: https://doi.org/10.1016/j.progpolymsci.2010.07.005.
   Web of Science ®Google Scholar
• Potts, J. R.; Dreyer, D. R.; Bielawski, C. W.; Ruoff, R. S. Graphene-Based Polymer Nanocomposites. Polymer 2011, 52, 5–25. DOI: https://doi.org/10.1016/j.polymer.2010.11.042.
   Web of Science ®Google Scholar
• Young, R. J.; Kinloch, I. A.; Gong, L.; Novoselov, K. S. The Mechanics of Graphene Nanocomposites: A Review. Compos. Sci. Technol. 2012, 72, 1459–1476. DOI: https://doi.org/10.1016/j.compscitech.2012.05.005.
   Web of Science ®Google Scholar
• Alexandre, M.; Dubois, P. Polymer-Layered Silicate Nanocomposites: Preparation, Properties and Uses of a New Class of Materials. Mater. Sci. Eng.: R: Rep. 2000, 28, 1–63. DOI: https://doi.org/10.1016/S0927-796X(00)00012-7.
   Web of Science ®Google Scholar
• Prioglio, G.; Agnelli, S.; Conzatti, L.; Balasooriya, W.; Schrittesser, B.; Galimberti, M. Graphene Layers Functionalized with a Janus Pyrrole-Based Compound in Natural Rubber Nanocomposites with Improved Ultimate and Fracture Properties. Polymers 2020, 12, 944. DOI: https://doi.org/10.3390/polym12040944.
   Google Scholar
• Gatos, K. G.; Karger-Kocsis, J. Effect of the Aspect Ratio of Silicate Platelets on the Mechanical and Barrier Properties of Hydrogenated Acrylonitrile Butadiene Rubber (HNBR)/Layered Silicate Nanocomposites. Eur. Polym. J. 2007, 43, 1097–1104. DOI: https://doi.org/10.1016/j.eurpolymj.2007.01.032.
   Web of Science ®Google Scholar
• Hwang, W.-G.; Wei, K.-H.; Wu, C.-M. Mechanical, Thermal, and Barrier Properties of NBR/Organosilicate Nanocomposites. Polym. Eng. Sci. 2004, 44, 2117–2124. DOI: https://doi.org/10.1002/pen.20217.
   Web of Science ®Google Scholar
• Picard, E.; Gérard, J.-F.; Espuche, E. Reinforcement of the Gas Barrier Properties of Polyethylene and Polyamide through the Nanocomposite Approach: Key Factors and Limitations. Oil Gas Sci. Technol. – Rev. IFP Energies Nouvelles 2015, 70, 237–249. DOI: https://doi.org/10.2516/ogst/2013145.
   Google Scholar
• Griffith, A. A. The Phenomena of Rupture and Flow in Solids. Phil. Trans. R. Soc. Lond. A 1921, 221, 163–198. DOI: https://doi.org/10.1098/rsta.1921.0006.
   Google Scholar
• Thomas, A. G. Rupture of Rubber II. The Strain Concentration at an Incision. J. Polym. Sci. 1955, 18, 177–188. DOI: https://doi.org/10.1002/pol.1955.120188802.
   Google Scholar
• Rivlin, R. S.; Thomas, A. G. Rupture of Rubber. I. Characteristic Energy for Tearing. J. Polym. Sci. 1953, 10, 291–318. DOI: https://doi.org/10.1002/pol.1953.120100303.
   Web of Science ®Google Scholar
• Lake, G. J.; Lawrence, C. C.; Thomas, A. G. High-Speed Fracture of Elastomers: Part I. Rubber Chem. Technol. 2000, 73, 801–817. DOI: https://doi.org/10.5254/1.3547620.
   Web of Science ®Google Scholar
• Lake, G. J. Fracture Mechanics and Its Application to Failure in Rubber Articles. Rubber Chem. Technol. 2003, 76, 567–591. DOI: https://doi.org/10.5254/1.3547761.
   Web of Science ®Google Scholar
• Agnelli, S.; Balasooriya, W.; Bignotti, F.; Schrittesser, B. On the Experimental Measurement of Fracture Toughness in SENT Rubber Specimens. Polym. Test. 2020, 87, 106508. DOI: https://doi.org/10.1016/j.polymertesting.2020.106508.
   Web of Science ®Google Scholar