References
- Blasius, W. G. J.; Deeter, G. A.; Villalobos, M. A. Oligomeric Chain Extenders for Processing, Post-Processing and Recycling of Condensation Polymers. Synthesis, Compositions and Applications US6984694 B2, 2006.
- Clariant CESA Masterbatch Cleared for Food Contact. Addit. Polym. 2005, 2005, 9. DOI: https://doi.org/10.1016/S0306-3747(05)70421-8.
- Villalobos, M.; Awojulu, A.; Greeley, T.; Turco, G.; Deeter, G. Oligomeric Chain Extenders for Economic Reprocessing and Recycling of Condensation Plastics. Energy 2006, 31, 3227–3234. DOI: https://doi.org/10.1016/j.energy.2006.03.026.
- BASF SE, Technical Data Sheet Joncryl ® ADR 4368, 2008.
- Standau, T.; Zhao, C.; Murillo Castellón, S.; Bonten, C.; Altstädt, V. Chemical Modification and Foam Processing of Polylactide (PLA). Polymers (Basel) 2019, 11, 306. DOI: https://doi.org/10.3390/polym11020306.
- BASF SE, Upgrade your recycled plastics! Product Information Brochure, 2016.
- Tuna, B.; Benkreira, H. Chain Extension of Recycled PA6. Polym. Eng. Sci. 2018, 58, 1037–1042. DOI: https://doi.org/10.1002/pen.24663.
- BASF SE, Technical Data Sheet Joncryl ® ADF 1300, 2007.
- BASF SE, Technical Data Sheet Joncryl ® ADP 1200, 2006.
- BASF SE, Technical Data Sheet Joncryl ® ADD 3310, 2007.
- Liu, J.; Lou, L.; Yu, W.; Liao, R.; Li, R.; Zhou, C. Long Chain Branching Polylactide: Structures and Properties. Polymer (Guildf) 2010, 51, 5186–5197. DOI: https://doi.org/10.1016/j.polymer.2010.09.002.
- Corre, Y.-M.; Duchet, J.; Reignier, J.; Maazouz, A. Melt Strengthening of Poly (Lactic Acid) through Reactive Extrusion with Epoxy-Functionalized Chains. Rheol. Acta 2011, 50, 613–629. DOI: https://doi.org/10.1007/s00397-011-0538-1.
- Al-Itry, R.; Lamnawar, K.; Maazouz, A. Improvement of Thermal Stability, Rheological and Mechanical Properties of PLA, PBAT and Their Blends by Reactive Extrusion with Functionalized Epoxy. Polym. Degrad. Stab 2012, 97, 1898–1914. DOI: https://doi.org/10.1016/j.polymdegradstab.2012.06.028.
- Frenz, V.; Scherzer, D.; Villalobos, M.; Awojulu, A.; Edison, M.; Van Der Meer, R. Multifunctional Polymers as Chain Extenders and Compatibilizers for Polycondensates and Biopolymers. ANTEC 2008, 3, 1682–1686.
- Cailloux, J.; Santana, O. O.; Franco-Urquiza, E.; Bou, J. J.; Carrasco, F.; Gámez-Pérez, J.; Maspoch, M. L. Sheets of Branched Poly(Lactic Acid) Obtained by One Step Reactive Extrusion Calendering Process: Melt Rheology Analysis. Express Polym. Lett. 2013, 7, 304–318. DOI: https://doi.org/10.3144/expresspolymlett.2013.27.
- BASF SE, Technical Data Sheet Joncryl ® ADR 4468, 2014.
- BASF SE, Technical Data Sheet Joncryl ® ADR 4400, 2014.
- Dow Chemical Company, Liquid Epoxy Resins, 1999.
- Jaszkiewicz, A.; Bledzki, A. K.; Van Der Meer, R.; Franciszczak, P.; Meljon, A. How Does a Chain-Extended Polylactide Behave?: A Comprehensive Analysis of the Material, Structural and Mechanical Properties. Polym. Bull. 2014, 71, 1675–1690. DOI: https://doi.org/10.1007/s00289-014-1148-8.
- Gu, L.; Xu, Y.; Fahnhorst, G. W.; Macosko, C. W. Star vs Long Chain Branching of Poly(Lactic Acid) with Multifunctional Aziridine. J. Rheol. (N. Y. N. Y) 2017, 61, 785–796. DOI: https://doi.org/10.1122/1.4985344.
- Japon, S.; Boogh, L.; Leterrier, Y.; Månson, J. A. E. Reactive Processing of Poly(Ethylene Terephthalate) Modified with Multifunctional Epoxy-Based Additives. Polymer (Guildf) 2000, 41, 5809–5818. DOI: https://doi.org/10.1016/S0032-3861(99)00768-5.
- Japon, S.; Leterrier, Y.; Månson, J.-A. E. Recycling of Poly(Ethylene Terephthalate) into Closed-Cell Foams. Polym. Eng. Sci. 2000, 40, 1942–1952. DOI: https://doi.org/10.1002/pen.11326.
- Nguyen, Q. T.; Japon, S.; Luciani, A.; Leterrier, Y.; Månson, J.-A. E. Molecular Characterization and Rheological Properties of Modified Poly(Ethylene Terephthalate) Obtained by Reactive Extrusion. Polym. Eng. Sci. 2001, 41, 1299–1309. DOI: https://doi.org/10.1002/pen.10830.
- Xanthos, M.; Wan, C.; Dhavalikar, R.; Karayannidis, G. P.; Bikiaris, D. N. Identification of Rheological and Structural Characteristics of Foamable Poly(Ethylene Terephthalate) by Reactive Extrusion. Polym. Int. 2004, 53, 1161–1168. DOI: https://doi.org/10.1002/pi.1526.
- Zhong, W.; Ge, J.; Gu, Z.; Li, W.; Chen, X.; Zang, Y.; Yang, Y. Study on Biodegradable Polymer Materials Based on Poly(Lactic Acid). I. Chain Extending of Low Molecular Weight Poly(Lactic Acid) with Methylenediphenyl Diisocyanate. J. Appl. Polym. Sci. 1999, 74, 2546–2551. DOI: https://doi.org/10.1002/(SICI)1097-4628(19991205)74:10 < 2546::AID-APP24 > 3.0.CO;2-Z.
- Liu, C.; Jia, Y.; He, A. Preparation of Higher Molecular Weight Poly (L -Lactic Acid) by Chain Extension. Int. J. Polym. Sci. 2013, (2013), 1–7. DOI: https://doi.org/10.1155/2013/315917.
- Bo-Hsin, L.; Ming-Chien, Y. Improvement of Thermal and Mechanical Properties of Poly(L-Lactic Acid) with 4,4-Methylene Diphenyl Diisocyanate. Pharmacovigil. Rev. 2018, 10, 8–11. DOI: https://doi.org/10.1002/pat..
- Göttermann, S.; Standau, T.; Weinmann, S.; Altstädt, V.; Bonten, C. Effect of Chemical Modification on the Thermal and Rheological Properties of Polylactide. Polym. Eng. Sci. 2017, 57(11): 1242-1251. DOI: https://doi.org/10.1002/pen.24505..
- Di, Y.; Iannace, S.; Maio, E. D.; Nicolais, L. Reactively Modified Poly (Lactic Acid): Properties and Foam Processing. Macromol. Mater. Eng. 2005, 290, 1083–1090. DOI: https://doi.org/10.1002/mame.200500115.
- Park, S. H.; Park, K. Y.; Suh, K. D. Compatibilizing Effect of Isocyanate Functional Group on Polyethylene Terephthalate/Low Density Polyethylene Blends. J. Polym. Sci. B Polym. Phys. 1998, 36, 447–453. DOI: https://doi.org/10.1002/(SICI)1099-0488(199802)36:3 < 447::AID-POLB7 > 3.0.CO;2-O.
- Södergård, A.; Stolt, M. Industrial Production of High Molecular Weight Poly(Lactic Acid). Poly(Lactic Acid) Synth. Struct. Prop. Process. Appl. 2010, 27–41.
- Torres, N.; Robin, J. J.; Boutevin, B. Chemical Modification of Virgin and Recycled Poly(Ethylene Terephthalate) by Adding of Chain Extenders during Processing. J. Appl. Polym. Sci. 2001, 79, 1816–1824. DOI: https://doi.org/10.1002/1097-4628(20010307)79:10 < 1816::AID-APP100 > 3.0.CO;2-R.
- Vachon, A.; Pépin, K.; Balampanis, E.; Veilleux, J.; Vuillaume, P. Y. Compatibilization of PLA/PEBA Blends via Reactive Extrusion: A Comparison of Different Coupling Agents. J. Polym. Environ. 2017, 25, 812–827. DOI: https://doi.org/10.1007/s10924-016-0860-x.
- Wang, H.; Sun, X.; Seib, P. Strengthening Blends of Poly(Lactic Acid) and Starch with Methylenediphenyl Diisocyanate. J. Appl. Polym. Sci. 2001, 82, 1761–1767. DOI: https://doi.org/10.1002/app.2018.
- Jun, C. L. Reactive Blending of Biodegradable Polymers: PLA and Starch. J. Polym. Environ. 2000, 8, 33–37. . DOI: https://doi.org/10.1023/A:1010172112118.
- Liu, X.; Yu, L.; Dean, K.; Toikka, G.; Bateman, S.; Nguyen, T.; Yuan, Q.; Filippou, C. Improving Melt Strength of Polylactic Acid. Int. Polym. Process. 2013, 28, 64–71. DOI: https://doi.org/10.3139/217.2667.
- Liu, J.; Zhang, S.; Zhang, L.; Bai, Y. Preparation and Rheological Characterization of Long Chain Branching Polylactide. Polymer (United Kingdom) 2014, 55, 2472–2479. DOI: https://doi.org/10.1016/j.polymer.2014.02.024.
- Meng, Q.; Heuzey, M.-C.; Carreau, P. J. Control of Thermal Degradation of Polylactide/Clay Nanocomposites during Melt Processing by Chain Extension Reaction. Polym. Degrad. Stab. 2012, 97, 2010–2020. DOI: https://doi.org/10.1016/j.polymdegradstab.2012.01.030.
- Incarnato, L.; Scarfato, P.; Maio, L. D.; Acierno, D. Structure and Rheology Recycled PET Modified by Reactive Extrusion. Polymer (Guildf) 2000, 41, 6825–6831. DOI: https://doi.org/10.1016/S0032-3861(00)00032-X.
- Forsythe, J. S.; Cheah, K.; Nisbet, D. R.; Gupta, R. K.; Lau, A.; Donovan, A. R.; O'Shea, M. S.; Moad, G. Rheological Properties of High Melt Strength Poly(Ethylene Terephthalate) Formed by Reactive Extrusion. J. Appl. Polym. Sci. 2006, 100, 3646–3652. DOI: https://doi.org/10.1002/app.23166.
- Härth, M.; Kaschta, J.; Schubert, D. W. Shear and Elongational Flow Properties of Long-Chain Branched Poly(Ethylene Terephthalates) and Correlations to Their Molecular Structure. Macromolecules 2014, 47, 4471–4478. DOI: https://doi.org/10.1021/ma5002657.
- Kruse, M.; Wagner, M. H. Rheological and Molecular Characterization of Long-Chain Branched Poly(Ethylene Terephthalate). Rheol. Acta 2017, 56, 887–904. DOI: https://doi.org/10.1007/s00397-017-1043-y.
- Kruse, M.; Wang, P.; Shah, R. S.; Wagner, M. H. Analysis of High Melt-Strength Poly(Ethylene Terephthalate) Produced by Reactive Processing by Shear and Elongational Rheology. Polym. Eng. Sci. 2019, 59, 396–410. DOI: https://doi.org/10.1002/pen.24936.
- Coccorullo, I.; Maio, L. D.; Montesano, S.; Incarnato, L. Theoretical and Experimental Study of Foaming Process with Chain Extended Recycled PET. Express Polym. Lett. 2009, 3, 84–96. DOI: https://doi.org/10.3144/expresspolymlett.2009.12.
- Daver, F.; Gupta, R.; Kosior, E. Rheological Characterisation of Recycled Poly(Ethylene Terephthalate) Modified by Reactive Extrusion. J. Mater. Process. Technol. 2008, 204, 397–402. DOI: https://doi.org/10.1016/j.jmatprotec.2007.11.090.
- Tuominen, J.; Seppälä, J. V. Synthesis and Characterization of Lactic Acid Based Poly(Ester-Amide). Macromolecules 2000, 33, 3530–3535. DOI: https://doi.org/10.1021/ma991676l.
- Kylmä, J.; Tuominen, J.; Helminen, A.; Seppälä, J. Chain Extending of Lactic Acid Oligomers. Effect of 2,2′-Bis(2-Oxazoline) on 1,6-Hexamethylene Diisocyanate Linking Reaction. Polymer (Guildf) 2001, 42, 3333–3343. DOI: https://doi.org/10.1016/S0032-3861(00)00751-5.
- Tuominen, J.; Kylmä, J.; Seppälä, J. Chain Extending of Lactic Acid Oligomers. 2. Increase of Molecular Weight with 1,6-Hexamethylene Diisocyanate and 2,2′-Bis(2-Oxazoline). Polymer (Guildf) 2002, 43, 3–10. DOI: https://doi.org/10.1016/S0032-3861(01)00606-1.
- Karayannidis, G. P.; Psalida, E. A. Chain Extension of Recycled Poly(Ethylene Terephthalate) with 2,2′-(1,4-Phenylene)Bis(2-Oxazoline). J. Appl. Polym. Sci. 2000, 77, 2206–2211. DOI: https://doi.org/10.1002/1097-4628(20000906)77:10 < 2206::AID-APP14 > 3.0.CO;2-D.
- Inata, H.; Matsumura, S. Chain Extenders for Polyesters. I. Addition‐Type Chain Extenders Reactive with Carboxyl End Groups of Polyesters. J. Appl. Polym. Sci. 1985, 30, 3325–3337. DOI: https://doi.org/10.1002/app.1985.070300815.
- Inata, H.; Matsumura, S. Chain Extenders for Polyesters. IV. Properties of the Polyesters chain-Extended by 2,2’ Bis(2-Oxazoline). J. Appl. Polym. Sci. 1987, 34, 2769–2776. DOI: https://doi.org/10.1002/app.1987.070340812.
- Cardi, N.; Po, R.; Giannotta, G.; Occhiello, E.; Garbassi, F.; Messina, G. Chain Extension of Recycled Poly(Ethylene Terephthalate) with 2,2′-Bis(2-Oxazoline). J. Appl. Polym. Sci. 1993, 50, 1501–1509. DOI: https://doi.org/10.1002/app.1993.070500903.
- Stloukal, P.; Kalendova, A.; Mattausch, H.; Laske, S.; Holzer, C.; Koutny, M. The Influence of a Hydrolysis-Inhibiting Additive on the Degradation and Biodegradation of PLA and Its Nanocomposites. Polym. Test. 2015, 41, 124–132. DOI: https://doi.org/10.1016/j.polymertesting.2014.10.015.
- Stloukal, P.; Jandikova, G.; Koutny, M.; Sedlařík, V. Carbodiimide Additive to Control Hydrolytic Stability and Biodegradability of PLA. Polym. Test. 2016, 54, 19–28. DOI: https://doi.org/10.1016/j.polymertesting.2016.06.007.
- Yang, L.; Chen, X.; Jing, X. Stabilization of Poly(Lactic Acid) by Polycarbodiimide. Polym. Degrad. Stab. 2008, 93, 1923–1929. DOI: https://doi.org/10.1016/j.polymdegradstab.2008.06.016.
- Holcapkova, P.; Stloukal, P.; Kucharczyk, P.; Omastova, M.; Kovalcik, A. Anti-Hydrolysis Effect of Aromatic Carbodiimide in Poly(Lactic Acid)/Wood Flour Composites. Compos. Part A Appl. Sci. Manuf. 2017, 103, 283–291. DOI: https://doi.org/10.1016/j.compositesa.2017.10.003.
- Najafi, N.; Heuzey, M. C.; Carreau, P. J.; Wood-Adams, P. M. Control of Thermal Degradation of Polylactide (PLA)-Clay Nanocomposites Using Chain Extenders. Polym. Degrad. Stab. 2012, 97, 554–565. DOI: https://doi.org/10.1016/j.polymdegradstab.2012.01.016.
- Palade, L. I.; Lehermeier, H. J.; Dorgan, J. R. Melt Rheology of High L-Content Poly(Lactic Acid). Macromolecules 2001, 34, 1384–1390. DOI: https://doi.org/10.1021/ma001173b.
- Lehermeier, H. J.; Dorgan, J. R. Melt Rheology of Poly(Lactic Acid). Polym. Eng. Sci. 2001, 41, 2172–2184. DOI: https://doi.org/10.1002/pen.10912.
- Li, J.; Gräter, H. Chain-Extenders and Foamed Thermoplastic Cellular Materials Obtained by Reactive Extrusion Process and With Help of Said Chain-Extenders. European Patent 2163577B9, 2008.
- Cicero, J. A.; Dorgan, J. R.; Dec, S. F.; Knauss, D. M. Phosphite Stabilization Effects on Two-Step Melt-Spun Fibers of Polylactide. Polym. Degrad. Stab. 2002, 78, 95–105. DOI: https://doi.org/10.1016/S0141-3910(02)00123-4.
- Meng, X.; Shi, G.; Chen, W.; Wu, C.; Xin, Z.; Han, T.; Shi, Y. Structure Effect of Phosphite on the Chain Extension in PLA. Polym. Degrad. Stab. 2015, 120, 283–289. DOI: https://doi.org/10.1016/j.polymdegradstab.2015.07.019.
- Meng, X.; Shi, G.; Wu, C.; Chen, W.; Xin, Z.; Shi, Y.; Sheng, Y. Chain Extension and Oxidation Stabilization of Triphenyl Phosphite (TPP) in PLA. Polym. Degrad. Stab. 2016, 124, 112–118. DOI: https://doi.org/10.1016/j.polymdegradstab.2015.12.003.
- Cavalcanti, F. N.; Teófilo, E. T.; Rabello, M. S.; Silva, S. M. L. Chain Extension and Degradation during Reactive Processing of PET in the Presence of Triphenyl Phosphite. Polym. Eng. Sci. 2007, 47, 2155–2163. DOI: https://doi.org/10.1002/pen.20912.
- Jacques, B.; Devaux, J.; Legras, R.; Nield, E. Investigation on Model Molecules of the Reactions Induced by Triphenyl Phosphite Addition during Polyester Processing. Macromolecules 1996, 29, 3129–3138. DOI: https://doi.org/10.1021/ma946431h.
- Jacques, B.; Devaux, J.; Legras, R.; Nield, E. Reactions Induced by Triphenyl Phosphite Addition during Melt Mixing of PET/PBT Blends: Chromatographic Evidence of a Molecular Weight Increase Due to the Creation of Bonds of Two Different Natures. Polymer (Guildf) 1997, 38, 5367–5377. DOI: https://doi.org/10.1016/S0032-3861(97)00097-9.
- Qin, D.; Wang, C.; Wang, H.; Jiang, X. Chain Extension and Thermal Behavior of Recycled Poly(Ethylene Terephthalate) Modified by Reactive Extrusion with Triphenyl Phosphite. MATEC Web Conf. 2016, 67, 06052–06057. DOI: https://doi.org/10.1051/matecconf/20166706052.
- Bimestre, B. H.; Saron, C. Chain Extension of Poly (Ethylene Terephthalate) by Reactive Extrusion with Secondary Stabilizer. Mater. Res. 2012, 15, 467–472. DOI: https://doi.org/10.1590/S1516-14392012005000058.
- Rytlewski, P.; Żenkiewicz, M.; Malinowski, R. Influence of Dicumyl Peroxide Content on Thermal and Mechanical Properties of Polylactide. Int. Polym. Process. 2011, 26, 580–586. DOI: https://doi.org/10.3139/217.2521.
- Wei, L.; McDonald, A. G. Peroxide Induced Cross-Linking by Reactive Melt Processing of Two Biopolyesters: Poly(3-Hydroxybutyrate) and Poly(l-Lactic Acid) to Improve Their Melting Processability. J. Appl. Polym. Sci. 2015, 132, n/a–n/a. DOI: https://doi.org/10.1002/app.41724.
- Takamura, M.; Nakamura, T.; Takahashi, T.; Koyama, K. Effect of Type of Peroxide on Cross-Linking of Poly(l-Lactide). Polym. Degrad. Stab. 2008, 93, 1909–1916. DOI: https://doi.org/10.1016/j.polymdegradstab.2008.07.001.
- Carlson, D.; Dubois, P.; Nie, L.; Narayan, R. Free Radical Branching of Polylactide by Reactive Extrusion. Polym. Eng. Sci. 1998, 38, 311–321. DOI: https://doi.org/10.1002/pen.10192.
- Signori, F.; Boggioni, A.; Righetti, M. C.; Rondán, C. E.; Bronco, S.; Ciardelli, F. Evidences of Transesterification, Chain Branching and Cross-Linking in a Biopolyester Commercial Blend upon Reaction with Dicumyl Peroxide in the Melt. Macromol. Mater. Eng. 2015, 300, 153–160. DOI: https://doi.org/10.1002/mame.201400187.
- Södergård, A.; Stolt, M. Properties of Lactic Acid Based Polymers and Their Correlation with Composition. Prog. Polym. Sci. 2002, 27, 1123–1163. DOI: https://doi.org/10.1016/S0079-6700(02)00012-6.
- Cherykhunthod, W.; Seadan, M.; Suttiruengwong, S. Effect of Peroxide and Chain Extender on Mechanical Properties and Morphology of Poly (Butylene Succinate)/Poly (Lactic Acid) Blends. IOP Conf. Ser: Mater. Sci. Eng. 2015, 87, 012073. DOI: https://doi.org/10.1088/1757-899X/87/1/012073.
- Dong, W.; Ma, P.; Wang, S.; Chen, M.; Cai, X.; Zhang, Y. Effect of Partial Crosslinking on Morphology and Properties of the Poly(β-Hydroxybutyrate)/Poly(d,l-Lactic Acid) Blends. Polym. Degrad. Stab. 2013, 98, 1549–1555. DOI: https://doi.org/10.1016/j.polymdegradstab.2013.06.033.
- Zimmerman, H.; Kim, N. T. Investigations on Thermal and Hydrolytic Degradation of Poly(Ethylene Terephthalate). Polym. Eng. Sci. 1980, 20, 680–683. DOI: https://doi.org/10.1002/pen.760201008.
- Da Costa, H. M.; Ramos, V. D.; Rocha, M. C. G. Rheological Properties of Polypropylene during Multiple Extrusion. Polym. Test. 2005, 24, 86–93. DOI: https://doi.org/10.1016/j.polymertesting.2004.06.006.
- Termonia, Y.; Meakin, P.; Smith, P. Theoretical Study of the Influence of the Molecular Weight on the Maximum Tensile Strength of Polymer Fibers. Macromolecules 1985, 18, 2246–2252. DOI: https://doi.org/10.1021/ma00153a032.
- Ravindranath, K.; Mashelkar, R. A. Polyethylene Terephthalate - II. Engineering Analysis. Chem. Eng. Sci. 1986, 41, 2969–2987. DOI: https://doi.org/10.1016/0009-2509(86)85034-5.
- Yang, Z.; Xin, C.; Mughal, W.; Li, X.; He, Y. High-Melt-Elasticity Poly(Ethylene Terephthalate) Produced by Reactive Extrusion with a Multi-Functional Epoxide for Foaming. J. Appl. Polym. Sci. 2018, 135, 45805. DOI: https://doi.org/10.1002/app.45805.
- Ng, H. Y.; Lu, X.; Lau, S. K. Thermal Conductivity of Boron Nitride-Filled Thermoplastics: Effect of Filler Characteristics and Composite Processing Conditions. Polym. Compos. 2005, 26, 778–790. DOI: https://doi.org/10.1002/pc.20151.
- Standau, T.; Hädelt, B.; Schreier, P.; Altstädt, V. Development of a Bead Foam from an Engineering Polymer with Addition of Chain Extender: Expanded Polybutylene Terephthalate. Ind. Eng. Chem. Res. 2018, 57, 17170–17176. DOI: https://doi.org/10.1021/acs.iecr.8b04799.
- Xiao, L.; Wang, H.; Qian, Q.; Jiang, X.; Liu, X.; Huang, B.; Chen, Q. Molecular and Structural Analysis of Epoxide-Modified Recycled Poly(Ethylene Terephthalate) from Rheological Data. Polym. Eng. Sci. 2012, 52, 2127–2133. DOI: https://doi.org/10.1002/pen.23175.
- Jaszkiewicz, A.; Bledzki, A. K.; Duda, A.; Galeski, A.; Franciszczak, P. Investigation of Processability of Chain-Extended Polylactides during Melt processing - Compounding Conditions and Polymer Molecular Structure. Macromol. Mater. Eng. 2014, 299, 307–318. DOI: https://doi.org/10.1002/mame.201300115.
- Arruda, L. C.; Magaton, M.; Bretas, R. E. S.; Ueki, M. M. Influence of Chain Extender on Mechanical, Thermal and Morphological Properties of Blown Films of PLA/PBAT Blends. Polym. Test. 2015, 43, 27–37. DOI: https://doi.org/10.1016/j.polymertesting.2015.02.005.
- Ghanbari, A.; Heuzey, M. C.; Carreau, P. J.; Ton-That, M. T. A Novel Approach to Control Thermal Degradation of PET/Organoclay Nanocomposites and Improve Clay Exfoliation. Polymer (Guildf) 2013, 54, 1361–1369. DOI: https://doi.org/10.1016/j.polymer.2012.12.066.
- Bikiaris, D. N.; Karayannidis, G. P. Chain Extension of Polyesters PET and PBT with Two New Diimidodiepoxides. II. J. Polym. Sci. A Polym. Chem. 1996, 34, 1337–1342. DOI: https://doi.org/10.1002/(SICI)1099-0518(199605)34:7 < 1337::AID-POLA22 > 3.0.CO;2-9.
- Kahraman, Y.; Özdemir, B.; Kılıç, V.; Goksu, Y. A.; Nofar, M. Super Toughened and Highly Ductile PLA/TPU Blend Systems by in Situ Reactive Interfacial Compatibilization Using Multifunctional Epoxy‐Based Chain Extender. J. Appl. Polym. Sci. 2021, 138, )50457–50416. DOI: https://doi.org/10.1002/app.50457.
- Tuna, B.; Ozkoc, G. Effects of Diisocyanate and Polymeric Epoxidized Chain Extenders on the Properties of Recycled Poly(Lactic Acid). J. Polym. Environ. 2017, 25, 983–993. DOI: https://doi.org/10.1007/s10924-016-0856-6.
- Yahyaee, N.; Javadi, A.; Garmabi, H.; Khaki, A. Effect of Two‐Step Chain Extension Using Joncryl and PMDA on the Rheological Properties of Poly (Lactic Acid). Macromol. Mater. Eng. 2020, 305, 1900423. DOI: https://doi.org/10.1002/mame.201900423.
- Qian, Z.; Chen, X.; Xu, J.; Guo, B. Chain Extension of PA1010 by Reactive Extrusion by Diepoxide 711 and Diepoxide TDE85 as Chain Extenders. J. Appl. Polym. Sci. 2004, 94, 2347–2355. DOI: https://doi.org/10.1002/app.21043.
- Yu, T.; Chen, J. S.; Wu, F. M.; Rocks, J. Crosslinking of Polyamide 6 by Reactive Processing. MSF. 2015, 815, 576–582. DOI: https://doi.org/10.4028/www.scientific.net/MSF.815.576.
- Dörr, D.; Kuhn, U.; Altstädt, V. Rheological Study of Gelation and Crosslinking in Chemical Modified Polyamide 12 Using a Multiwave Technique. Polymers (Basel) 2020, 12, 855. DOI: https://doi.org/10.3390/polym12040855.
- Makkam, S.; Harnnarongchai, W. Rheological and Mechanical Properties of Recycled PET Modified by Reactive Extrusion. Energy Procedia 2014, 56, 547–553. DOI: https://doi.org/10.1016/j.egypro.2014.07.191.
- Nofar, M.; Salehiyan, R.; Sinha Ray, S. Rheology of Poly (Lactic Acid)-Based Systems. Polym. Rev. 2019, 59, 465–509. DOI: https://doi.org/10.1080/15583724.2019.1572185.
- Nofar, M.; Park, C. B. Poly (Lactic Acid) Foaming. Prog. Polym. Sci. 2014, 39, 1–21. DOI: https://doi.org/10.1016/j.progpolymsci.2014.04.001..
- Nofar, M.; Oğuz, H. Development of PBT/Recycled-PET Blends and the Influence of Using Chain Extender. J. Polym. Environ. 2019, 27, 1404–1417. DOI: https://doi.org/10.1007/s10924-019-01435-w.
- Tuna, B.; Benkreira, H. Reactive Extrusion of Polyamide 6 Using a Novel Chain Extender. Polym. Eng. Sci. 2019, 59, E25–E31. DOI: https://doi.org/10.1002/pen.24944.
- Nofar, M.; Zhu, W.; Park, C. B.; Randall, J. Crystallization Kinetics of Linear and Long-Chain-Branched Polylactide. Ind. Eng. Chem. Res. 2011, 50, 13789–13798. DOI: https://doi.org/10.1021/ie2011966.
- Nofar, M.; Zhu, W.; Park, C. B. Effect of Dissolved CO2 on the Crystallization Behavior of Linear and Branched PLA. Polymer (Guildf) 2012, 53, 3341–3353. DOI: https://doi.org/10.1016/j.polymer.2012.04.054.
- Nofar, M. Synergistic Effects of Chain Extender and Nanoclay on the Crystallization Behaviour of Polylactide. Int. J. Mater. Sci. Res. 2018, 1, 1–8. DOI: https://doi.org/10.18689/ijmsr-1000101.
- Jalali, A.; Huneault, M. A.; Nofar, M.; Lee, P. C.; Park, C. B. Effect of Branching on Flow-Induced Crystallization of Poly (Lactic Acid). Eur. Polym. J. 2019, 119, 410–420. DOI: https://doi.org/10.1016/j.eurpolymj.2019.07.045.
- Al-Itry, R.; Lamnawar, K.; Maazouz, A. Reactive Extrusion of PLA, PBAT with a Multi-Functional Epoxide: Physico-Chemical and Rheological Properties. Eur. Polym. J. 2014, 58, 90–102. DOI: https://doi.org/10.1016/j.eurpolymj.2014.06.013.
- Najafi, N.; Heuzey, M. C.; Carreau, P. J.; Therriault, D.; Park, C. B. Rheological and Foaming Behavior of Linear and Branched Polylactides. Rheol. Acta 2014, 53, 779–790. DOI: https://doi.org/10.1007/s00397-014-0801-3.
- Wang, J.; Zhu, W.; Zhang, H.; Park, C. B. Continuous Processing of Low-Density, Microcellular Poly(Lactic Acid) Foams with Controlled Cell Morphology and Crystallinity. Chem. Eng. Sci. 2012, 75, 390–399. DOI: https://doi.org/10.1016/j.ces.2012.02.051.
- Cailloux, J.; Santana, O. O.; Maspoch, M. L.; Bou, J. J.; Carrasco, F. Using Viscoelastic Properties to Quantitatively Estimate the Amount of Modified Poly(Lactic Acid) Chains through Reactive Extrusion. J. Rheol. (N. Y.) 2015, 59, 1191–1227. DOI: https://doi.org/10.1122/1.4928071.
- Eslami, H.; Kamal, M. R. Effect of a Chain Extender on the Rheological and Mechanical Properties of Biodegradable Poly(Lactic Acid)/Poly[(Butylene Succinate)-co-Adipate] Blends. J. Appl. Polym. Sci. 2013, 129, 2418–2428. DOI: https://doi.org/10.1002/app.38449.
- Dean, K. M.; Petinakis, E.; Meure, S.; Yu, L.; Chryss, A. Melt Strength and Rheological Properties of Biodegradable Poly(Lactic Acid) Modified via Alkyl Radical-Based Reactive Extrusion Processes. J. Polym. Environ. 2012, 20, 741–747. DOI: https://doi.org/10.1007/s10924-012-0461-2.
- Wagner, M. H.; Schulze, V.; Göttfert, A. Rheotens-Mastercurves and Drawability of Polymer Melts. Polym. Eng. Sci. 1996, 36, 925–935. DOI: https://doi.org/10.1002/pen.10480.
- Lin, G. G.; Hu, M. C. Measurement of Elongation Viscosity for Polymer Melts by Fiber Spinning. Adv. Polym. Technol. 1997, 16, 199–207. DOI: https://doi.org/10.1002/(SICI)1098-2329(199723)16:3 < 199::AID-ADV4 > 3.0.CO;2-O.
- Rätzsch, M. Reaction Mechanism to Long-Chain Branched PP. J. Macromol. Sci. - Pure Appl. Chem. 1999, 36, 1759–1769. DOI: https://doi.org/10.1081/MA-100101626.
- Yu, L.; Toikka, G.; Dean, K.; Bateman, S.; Yuan, Q.; Filippou, C.; Nguyen, T. Foaming Behaviour and Cell Structure of Poly(Lactic Acid) after Various Modifications. Polym. Int. 2013, 62, 759–765. DOI: https://doi.org/10.1002/pi.4359.
- Liu, W.; Wang, X.; Li, H.; Du, Z.; Zhang, C. Study on Rheological and Extrusion Foaming Behaviors of Chain-Extended Poly (Lactic Acid)/Clay Nanocomposites. J. Cell. Plast. 2013, 49, 535–554. DOI: https://doi.org/10.1177/0021955X13503845.
- Standau, T.; Murillo Castellón, S.; Delavoie, A.; Bonten, C.; Altstädt, V. Effects of Chemical Modifications on the Rheological and the Expansion Behavior of Polylactide (PLA) in Foam Extrusion. E-Polymers 2019, 19, 297–304. DOI: https://doi.org/10.1515/epoly-2019-0030.
- Standau, T.; Long, H.; Murillo Castellón, S.; Brütting, C.; Bonten, C.; Altstädt, V. Evaluation of the Zero Shear Viscosity, the D-Content and Processing Conditions as Foam Relevant Parameters for Autoclave Foaming of Standard. Materials (Basel) 2020, 13, 1371–1316. DOI: https://doi.org/10.3390/ma13061371.
- Liu, W.; Zhu, X.; Gao, H.; Su, X.; Wu, X. Preparation and Characterization of PLA Foam Chain Extended through Grafting Octa(Epoxycyclohexyl) POSS onto Carbon Nanotubes. Cell. Polym. 2020, 39, 117–138. DOI: https://doi.org/10.1177/0262489320912521.
- Sailer, C.; Weber, M.; Steininger, H.; Handge, U. A. Grafting of Polyamide 6 on a styrene - Acrylonitrile Maleic Anhydride Terpolymer: Melt Rheology at the Critical Gel State. Rheol. Acta 2009, 48, 579–588. DOI: https://doi.org/10.1007/s00397-009-0359-7.
- Laun, H. M.; Schmidt, G. Rheotens Tests and Viscoelastic Simulations Related to High-Speed Spinning of Polyamide 6. J. Non-Newton. Fluid Mech. 2015, 222, 45–55. DOI: https://doi.org/10.1016/j.jnnfm.2014.08.018.
- Härth, M.; Dörnhöfer, A. Film Blowing of Linear and Long-Chain Branched Poly(Ethylene Terephthalate). Polymers (Basel) 2020, 12, 1605. DOI: https://doi.org/10.3390/polym12071605.
- Härth, M.; Dörnhöfer, A.; Kaschta, J.; Münstedt, H.; Schubert, D. W. Molecular Structure and Rheological Properties of a Poly(Ethylene Terephthalate) Modified by Two Different Chain Extenders. J. Appl. Polym. Sci. 2021, 138, 50110. DOI: https://doi.org/10.1002/app.50110.
- Najafi, N.; Heuzey, M. C.; Carreau, P.; Therriault, D. Quiescent and Shear-Induced Crystallization of Linear and Branched Polylactides. Rheol. Acta 2015, 54, 831–845. DOI: https://doi.org/10.1007/s00397-015-0874-7.
- Nofar, M. Rheological, Thermal, and Foaming Behaviors of Different Polylactide Grades. Int. J. Mater. Sci. Res. 2018, 1, 16–22. DOI: https://doi.org/10.18689/ijmsr-1000103.
- Göttermann, S.; Weinmann, S.; Bonten, C.; Standau, T.; Altstädt, V. Modifiziertes Polylactid Für Die Schaumextrusion. Presented at 24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb. 25–26, 2015.
- Iñiguez-Franco, F.; Auras, R.; Ahmed, J.; Selke, S.; Rubino, M.; Dolan, K.; Soto-Valdez, H. Control of Hydrolytic Degradation of Poly(Lactic Acid) by Incorporation of Chain Extender: From Bulk to Surface Erosion. Polym. Test. 2018, 67, 190–196. DOI: https://doi.org/10.1016/j.polymertesting.2018.02.028.
- Tuna, B.; Benkreira, H. Chain Extension of Polyamide 6/Organoclay Nanocomposites. Polym. Eng. Sci. 2019, 59, 1233–1241. DOI: https://doi.org/10.1002/pen.25106.
- Hamad, K.; Kaseem, M.; Deri, F. Recycling of Waste from Polymer Materials: An Overview of the Recent Works. Polym. Degrad. Stab. 2013, 98, 2801–2812. DOI: https://doi.org/10.1016/j.polymdegradstab.2013.09.025.
- Ignatyev, I. A.; Thielemans, W.; Vander Beke, B. Recycling of Polymers: A Review. ChemSusChem 2014, 7, 1579–1593. DOI: https://doi.org/10.1002/cssc.201300898.
- Dleva, L.; Van Kets, K.; Kuzmanovic, M.; Demets, R.; Hubo, S.; Mys, N.; De Meester, S.; Ragaert, K. An Introductory Review Mechanical Recycling of Polymers For Dummies. 2019. UBuntoo. Available online: https://ubuntoo.com/blogs/mechanical-recycling-for-dummies (accessed on 22 May 2019).
- Dimonie, D.; Socoteanu, R.; Pop, S.; Fierascu, I.; Fierascu, R.; Petrea, C.; Zaharia, C.; Petrache, M. Overview on Mechanical Recycling by Chain Extension of POSTC-PET Bottles. Mater. Recycl. - Trends Perspect. 2012, 85-114. DOI: https://doi.org/10.5772/31841..
- Ragaert, K.; Delva, L.; Van Geem, K. Mechanical and Chemical Recycling of Solid Plastic Waste. Waste Manag. 2017, 69, 24–58. DOI: https://doi.org/10.1016/j.wasman.2017.07.044.
- Badia, J. D.; Strömberg, E.; Karlsson, S.; Ribes-Greus, A. The Role of Crystalline, Mobile Amorphous and Rigid Amorphous Fractions in the Performance of Recycled Poly (Ethylene Terephthalate) (PET). Polym. Degrad. Stab. 2012, 97, 98–107. DOI: https://doi.org/10.1016/j.polymdegradstab.2011.10.008.
- Awaja, F.; Pavel, D. Recycling of PET. Eur. Polym. J. 2005, 41, 1453–1477. DOI: https://doi.org/10.1016/j.eurpolymj.2005.02.005.
- Breyer, K.; Regel, M. W. Reprocessing of Post-Consumer PET by Reactive Extrusion. Polym. Recycl. 1996, 2, 251–255.
- Scheirs, J. Polymer Recycling; John Wiley & Sons, Chichester, UK, pp. 591,1998.
- Karayannidis, G. P.; Kokkalas, D. E.; Bikiaris, D. N. Solid‐State Polycondensation of Poly(Ethylene Terephthalate) Recycled from Postconsumer Soft‐Drink Bottles. II. J. Appl. Polym. Sci. 1995, 56, 405–410. DOI: https://doi.org/10.1002/app.1995.070560311.
- Tavares, A. A.; Silva, D. F. A.; Lima, P. S.; Andrade, D. L. A. C. S.; Silva, S. M. L.; Canedo, E. L. Chain Extension of Virgin and Recycled Polyethylene Terephthalate. Polym. Test. 2016, 50, 26–32. DOI: https://doi.org/10.1016/j.polymertesting.2015.11.020.
- Karsli, N. G. A Study on the Fracture, Mechanical and Thermal Properties of Chain Extended Recycled Poly(Ethylene Terephthalate). J. Thermoplast. Compos. Mater. 2017, 30, 1157–1172. DOI: https://doi.org/10.1177/0892705715618740.
- Su, K.-H.; Lin, J.-H.; Lin, C.-C. Influence of Reprocessing on the Mechanical Properties and Structure of Polyamide 6. J. Mater. Process. Technol. 2007, 192-193, 532–538. DOI: https://doi.org/10.1016/j.jmatprotec.2007.04.056.
- Al-Itry, R.; Lamnawar, K.; Maazouz, A. Rheological, Morphological, and Interfacial Properties of Compatibilized PLA/PBAT Blends. Rheol. Acta 2014, 53, 501–517. DOI: https://doi.org/10.1007/s00397-014-0774-2.
- Dörr, D.; Standau, T.; Murillo Castellón, S.; Bonten, C.; Altstädt, V. Rheology in the Presence of Carbon Dioxide (CO2) to Study the Melt Behavior of Chemically Modified Polylactide (PLA). Polymers (Basel) 2020, 12, 1108. DOI: https://doi.org/10.3390/polym12051108.
- Cosate de Andrade, M. F.; Fonseca, G.; Morales, A. R.; Mei, L. H. I. Mechanical Recycling Simulation of Polylactide Using a Chain Extender. Adv. Polym. Technol. 2018, 37, 2053–2060. DOI: https://doi.org/10.1002/adv.21863.
- Nofar, M.; Park, C. B. Polylactide Foams - Fundamentals, Manufacturing and Applications. Elsevier, William Andrew, Cambridge, MA, 2017. DOI: https://doi.org/10.1016/C2017-0-00939-4.
- Iannace, S.; Park, C. B. Biofoams: Science and Applications of Bio-Based Cellular and Porous Materials. CRC Press LLC, Boca Raton, FL, USA, 2015.
- Corre, Y.-M.; Maazouz, A.; Duchet, J.; Reignier, J. Batch Foaming of Chain Extended PLA with Supercritical CO2: Influence of the Rheological Properties and the Process Parameters on the Cellular Structure. J. Supercrit. Fluids 2011, 58, 177–188. DOI: https://doi.org/10.1016/j.supflu.2011.03.006.
- Ren, Q.; Wang, J.; Zhai, W.; Su, S. Solid State Foaming of Poly(Lactic Acid) Blown with Compressed CO2: Influences of Long Chain Branching and Induced Crystallization on Foam Expansion and Cell Morphology. Ind. Eng. Chem. Res. 2013, 52, 13411–13421. DOI: https://doi.org/10.1021/ie402039y.
- Tiwary, P.; Park, C. B.; Kontopoulou, M. Transition from Microcellular to Nanocellular PLA Foams by Controlling Viscosity, Branching and Crystallization. Eur. Polym. J. 2017, 91, 283–296. DOI: https://doi.org/10.1016/j.eurpolymj.2017.04.010.
- Pilla, S.; Kim, S. G.; Auer, G. K.; Gong, S.; Park, C. B. Microcellular Extrusion-Foaming of Polylactide with Chain-Extender. Polym. Eng. Sci. 2009, 49, 1653–1660. DOI: https://doi.org/10.1002/pen.21385.
- Mihai, M.; Huneault, M. A.; Favis, B. D. Rheology and Extrusion Foaming of Chain-Branched Poly(Lactic Acid). Polym. Eng. Sci. 2010, 50, 629–642. DOI: https://doi.org/10.1002/pen.21561.
- Larsen, C.; Neldin, A. Physical Extruder Foaming of Poly (Lactic Acid) — Processing and Foam Properties. Polym. Eng. Sci. 2013, 53, 941–949. DOI: https://doi.org/10.1002/pen.23341.
- Ludwiczak, J.; Kozlowski, M. Foaming of Polylactide in the Presence of Chain Extender. J. Polym. Environ. 2015, 23, 137–142. DOI: https://doi.org/10.1007/s10924-014-0658-7.
- Bocz, K.; Tábi, T.; Vadas, D.; Sauceau, M.; Fages, J.; Marosi, G. Characterisation of Natural Fibre Reinforced PLA Foams Prepared by Supercritical CO2assisted Extrusion. Express Polym. Lett. 2016, 10, 771–779. DOI: https://doi.org/10.3144/expresspolymlett.2016.71.
- Nofar, M.; Guo, Y.; Park, C. B. Double Crystal Melting Peak Generation for Expanded Polypropylene Bead Foam Manufacturing. Ind. Eng. Chem. Res. 2013, 52, 2297–2303. DOI: https://doi.org/10.1021/ie302625e.
- Nofar, M.; Ameli, A.; Park, C. B. A Novel Technology to Manufacture Biodegradable Polylactide Bead Foam Products. Mater. Des. 2015, 83, 413–421. DOI: https://doi.org/10.1016/j.matdes.2015.06.052.
- Nofar, M.; Park, C. B. A Method for the Preparation of PLA Bead Foams. WO2014158014-A1, 2014.
- Nofar, M.; Tabatabaei, A.; Sojoudiasli, H.; Park, C. B.; Carreau, P. J.; Heuzey, M. C.; Kamal, M. R. Mechanical and Bead Foaming Behavior of PLA-PBAT and PLA-PBSA Blends with Different Morphologies. Eur. Polym. J. 2017, 90, 231–244. DOI: https://doi.org/10.1016/j.eurpolymj.2017.03.031.
- Nofar, M.; Ameli, A.; Park, C. B. Development of Polylactide Bead Foams with Double Crystal Melting Peaks. Polymer (Guildf) 2015, 69, 83–94. DOI: https://doi.org/10.1016/j.polymer.2015.05.048.
- Lohmann, J.; Sampath, B. D. S.; Gutmann, P.; Künkel, A.; Hahn, K.; Füßl, A. Verfahren zur Herstellung von expandierbaren Polymilchsäurehaltigen Granulaten. WO 2014/001119 AI, 2014.
- Najafi, N.; Heuzey, M. C.; Carreau, P. J.; Therriault, D.; Park, C. B. Mechanical and Morphological Properties of Injection Molded Linear and Branched-Polylactide (PLA) Nanocomposite Foams. Eur. Polym. J. 2015, 73, 455–465. DOI: https://doi.org/10.1016/j.eurpolymj.2015.11.003.
- Yan, H.; Yuan, H.; Gao, F.; Zhao, L.; Liu, T. Modification of Poly(Ethylene Terephthalate) by Combination of Reactive Extrusion and Followed Solid-State Polycondensation for Melt Foaming. J. Appl. Polym. Sci. 2015, 132, n/a–n/a. DOI: https://doi.org/10.1002/app.42708.
- Bethke, C.; Goedderz, D.; Weber, L.; Standau, T.; Döring, M.; Altstädt, V. Improving the Flame‐Retardant Property of Bottle‐Grade PET Foam Made by Reactive Foam Extrusion. J. Appl. Polym. Sci. 2020, 137, 49042. DOI: https://doi.org/10.1002/app.49042.
- Yao, S.; Guo, T.; Liu, T.; Xi, Z.; Xu, Z.; Zhao, L. Good Extrusion Foaming Performance of Long-Chain Branched PET Induced by Its Enhanced Crystallization Property. J. Appl. Polym. Sci. 2020, 137, 49268–49216. DOI: https://doi.org/10.1002/app.49268.
- Bocz, K.; Molnár, B.; Marosi, G.; Ronkay, F. Preparation of Low-Density Microcellular Foams from Recycled PET Modified by Solid State Polymerization and Chain Extension. J. Polym. Environ. 2019, 27, 343–351. DOI: https://doi.org/10.1007/s10924-018-1351-z.
- Szabó, V. A.; Dogossy, G. Investigation of Flame Retardant RPET Foam. Period. Polytech. Mech. Eng. 2019, 64, 81–87. DOI: https://doi.org/10.3311/PPme.14556.
- Xu, M.; Chen, Y.; Liu, T.; Zhao, L.; Park, C. B. Determination of Modified Polyamide 6’s Foaming Windows by Bubble Growth Simulations Based on Rheological Measurements. J. Appl. Polym. Sci. 2019, 136, 48138–48114. DOI: https://doi.org/10.1002/app.48138.
- Yeh, S. K.; Liu, W. H.; Huang, Y. M. Carbon Dioxide-Blown Expanded Polyamide Bead Foams with Bimodal Cell Structure. Ind. Eng. Chem. Res. 2019, 58, 2958–2969. DOI: https://doi.org/10.1021/acs.iecr.8b05195.
- Dörr, D.; Raps, D.; Kirupanantham, D.; Holmes, C.; Altstädt, V. 2020 Expanded Polyamide 12 Bead Foams (ePA) Thermo-Mechanical Properties of Molded Parts. AIP Conference Proceedings 2205, 020037. DOI: https://doi.org/10.1063/1.5142952.
- Holmes, C. E.; Le, H. M. T.; Kerling, S.; Kirupanantham, D.; Altstädt, V.; Fathi, A.; Raps, D.; Keilholz, C.; Koeppl, T.; Smith, P. L. M.; et al. Expanded Polyamide Pellets and Method for Manufacturing Molded Components using them. WO 2016030333 A1, 2016.
- Kriha, O.; Hahn, K.; Desbois, P.; Warzelhahn, V.; Ruckdäschel, H.; Hofmann, M.; Exner, C.; Hingmann, R. Expansible Beads of Polyamide. European Patent 2 563 850 B1, 2016.
- Kriha, O.; Hahn, K.; Desbois, P.; Warzelhan, V.; Ruckdäschel, H.; Hofmann, M.; Exner, C.; Hingmann, R. Expandable Pelletized Polyamide Material. U.S. Patent 2011/0020457 A1, 2011.
- Sampath, B. D. S.; Kriha, O.; Ruckdäschel, H.; Desbois, P.; Gruber, F.; Hahn, K. Expandable Pelletized Materials based on Polyesters. U.S. Patent 2012/0286657 A1, 2012.
- Kriha, O.; Hahn, K.; Desbois, P.; Warzelhan, V.; Ruckdäschel, H.; Hofmann, M.; Exner, C.; Hingmann, R. Expandable Polyamide Granules. WO 2011/134996 A1, 2011.
- Jeong, B.; Xanthos, M.; Seo, Y. Extrusion Foaming Behavior of PBT Resins. J. Cell. Plast. 2006, 42, 165–176. DOI: https://doi.org/10.1177/0021955X06060952.
- Jeong, B. J.; Xanthos, M. Reactive Modification of PBT with Applications in Low Density Extrusion Foaming. Engineering 2007, 47, 21–25. DOI: https://doi.org/10.1002/pen.
- Aksit, M.; Gröschel, S.; Kuhn, U.; Aksit, A.; Kreger, K.; Schmidt, H.; Altstädt, V. Low-Density Polybutylene Terephthalate Foams with Enhanced Compressive Strength via a Reactive-Extrusion Process. Polymers, 2020, 12(9), 2021; DOI:https://doi.org/10.3390/polym12092021.
- Köppl, T.; Raps, D.; Altstädt, V. E-PBT - Bead Foaming of Poly(Butylene Terephthalate) by Underwater Pelletizing. J. Cell. Plast. 2014, 50, 475–487. DOI: https://doi.org/10.1177/0021955X14528524.
- Standau, T.; Hädelt, B.; Fafara, M.; Altstädt, V. 2019 Development of a Bead Foam Based on the Engineering Polymer Polybutylene Terephthalate. AIP Conf. Proc. 2055. DOI: https://doi.org/10.1063/1.5084836.
- Standau, T.; Schreier, P.; Hilgert, K.; Altstädt, V. 2020. Properties of Bead Foams with Increased Heat Stability Made from the Engineering Polymer Polybutylene Terephthalate (E-PBT). AIP Conference Proceedings, 2205, 020039. DOI: https://doi.org/10.1063/1.5142954.
- Duangphet, S.; Szegda, D.; Song, J.; Tarverdi, K. The Effect of Chain Extender on Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate): Thermal Degradation, Crystallization, and Rheological Behaviours. J. Polym. Environ. 2014, 22, 1–8. DOI: https://doi.org/10.1007/s10924-012-0568-5.
- Ventura, H.; Laguna-Gutiérrez, E.; Rodriguez-Perez, M. A.; Ardanuy, M. Effect of Chain Extender and Water-Quenching on the Properties of Poly(3-Hydroxybutyrate-co-4-Hydroxybutyrate) Foams for Its Production by Extrusion Foaming. Eur. Polym. J. 2016, 85, 14–25. DOI: https://doi.org/10.1016/j.eurpolymj.2016.10.001.
- Ventura, H.; Sorrentino, L.; Laguna-Gutierrez, E.; Rodriguez-Perez, M. A.; Ardanuy, M. Gas Dissolution Foaming as a Novel Approach for the Production of Lightweight Biocomposites of PHB/Natural Fibre Fabrics. Polymers (Basel) 2018, 10, 249. DOI: https://doi.org/10.3390/polym10030249.
- Zhou, H.; Wang, X.; Du, Z.; Li, H.; Yu, K. Preparation and Characterization of Chain Extended Poly(Butylene Succinate) Foams. Polym. Eng. Sci. 2015, 55, 988–994. DOI: https://doi.org/10.1002/pen.23964.
- Hahn, K.; Hofmann, M.; Sandler, J. K. W.; Scherzer, D.; Ruckdäschel, H. Partikelschaumstoffe mit verbesserter Steifigkeit. DE 10 2011 110 216 A1, 2012.
- Scherzer, D.; Hahn, K.; Hofmann, M.; Sandler, J. K. W.; Ruckdäschel, H. Extrusionsschaumstoffe mit verbesserter Steifigkeit. EP 2 420 531 A1, 2012.
- Nofar, M.; Sacligil, D.; Carreau, P. J.; Kamal, M. R.; Heuzey, M. C. Poly (Lactic Acid) Blends: Processing, Properties and Applications. Int. J. Biol. Macromol. 2019, 125, 307–360. DOI: https://doi.org/10.1016/j.ijbiomac.2018.12.002.
- Nofar, M.; Maani, A.; Sojoudi, H.; Heuzey, M. C.; Carreau, P. J. Interfacial and Rheological Properties of PLA/PBAT and PLA/PBSA Blends and Their Morphological Stability under Shear Flow. J. Rheol. (N. Y) 2015, 59, 317–333. DOI: https://doi.org/10.1122/1.4905714.
- Nofar, M.; Heuzey, M. C.; Carreau, P. J.; Kamal, M. R.; Randall, J. Coalescence in PLA-PBAT Blends under Shear Flow: Effects of Blend Preparation and PLA Molecular Weight. J. Rheol. (N. Y) 2016, 60, 637–648. DOI: https://doi.org/10.1122/1.4953446.
- Nofar, M.; Heuzey, M. C.; Carreau, P. J.; Kamal, M. R. Effects of Nanoclay and Its Localization on the Morphology Stabilization of PLA/PBAT Blends under Shear Flow. Polymer (Guildf) 2016, 98, 353–364. DOI: https://doi.org/10.1016/j.polymer.2016.06.044.
- Nofar, M.; Salehiyan, R.; Ciftci, U.; Jalali, A.; Durmuş, A. Ductility Improvements of PLA-Based Binary and Ternary Blends with Controlled Morphology Using PBAT, PBSA, and Nanoclay. Compos. Part B Eng. 2020, 182, 107661. DOI: https://doi.org/10.1016/j.compositesb.2019.107661.
- Nofar, M.; Oguz, H.; Ovalı, D. Effects of the Matrix Crystallinity, Dispersed Phase, and Processing Type on the Morphological, Thermal, and Mechanical Properties of Polylactide-Based Binary Blends with Poly[(Butylene Adipate)-co-Terephthalate] and Poly[(Butylene Succinate)-co-Adipate]. J. Appl. Polym. Sci. 2019, 136, 47636–47611. DOI: https://doi.org/10.1002/app.47636.
- Nofar, M.; Mohammadi, M.; Carreau, P. J. Effect of TPU Hard Segment Content on the Rheological and Mechanical Properties of PLA/TPU Blends. J. Appl. Polym. Sci. 2020, 137, 49387–49311. DOI: https://doi.org/10.1002/app.49387.
- Palierne, J. F. Linear Rheology of Viscoelastic Emulsions with Interfacial Tension. Rheol. Acta 1990, 29, 204–214. DOI: https://doi.org/10.1007/BF01331356.
- Ojijo, V.; Ray, S. S. Super Toughened Biodegradable Polylactide Blends with Non-Linear Copolymer Interfacial Architecture Obtained via Facile in-Situ Reactive Compatibilization. Polymer (Guildf) 2015, 80, 1–17. DOI: https://doi.org/10.1016/j.polymer.2015.10.038.
- Salehiyan, R.; Ray, S. S.; Bandyopadhyay, J.; Ojijo, V. The Distribution of Nanoclay Particles at the Interface and Their Influence on the Microstructure Development and Rheological Properties of Reactively Processed Biodegradable Polylactide/Poly(Butylene Succinate) Blend Nanocomposites. Polymers (Basel) 2017, 9, 350. DOI: https://doi.org/10.3390/polym9080350.
- Khankrua, R.; Pivsa-Art, S.; Hiroyuki, H.; Suttiruengwong, S. Effect of Chain Extenders on Thermal and Mechanical Properties of Poly(Lactic Acid) at High Processing Temperatures: Potential Application in PLA/Polyamide 6 Blend. Polym. Degrad. Stab. 2014, 108, 232–240. DOI: https://doi.org/10.1016/j.polymdegradstab.2014.04.019.
- Petruš, J.; Kučera, F.; Jančář, J. Online Monitoring of Reactive Compatibilization of Poly(Lactic Acid)/Polyamide 6 Blend with Different Compatibilizers. J. Appl. Polym. Sci. 2019, 136, 48005–48013. DOI: https://doi.org/10.1002/app.48005.
- Walha, F.; Lamnawar, K.; Maazouz, A.; Jaziri, M. Rheological, Morphological and Mechanical Studies of Sustainably Sourced Polymer Blends Based on Poly(Lactic Acid) and Polyamide 11. Polymers (Basel) 2016, 8, 61. DOI: https://doi.org/10.3390/polym8030061.
- Walha, F.; Lamnawar, K.; Maazouz, A.; Jaziri, M. Biosourced Blends Based on Poly (Lactic Acid) and Polyamide 11: Structure–Properties Relationships and Enhancement of Film Blowing Processability. Adv. Polym. Technol. 2018, 37, 2061–2074. DOI: https://doi.org/10.1002/adv.21864.
- Rasselet, D.; Caro-Bretelle, A. S.; Taguet, A.; Lopez-Cuesta, J. M. Reactive Compatibilization of PLA/PA11 Blends and Their Application in Additive Manufacturing. Materials (Basel) 2019, 12, 485. DOI: https://doi.org/10.3390/ma12030485.
- Vadori, R.; Misra, M.; Mohanty, A. K. Sustainable Biobased Blends from the Reactive Extrusion of Polylactide and Acrylonitrile Butadiene Styrene. J. Appl. Polym. Sci 2016, 133, 1–10. DOI: https://doi.org/10.1002/app.43771.
- Vadori, R.; Misra, M.; Mohanty, A. K. Statistical Optimization of Compatibilized Blends of Poly(Lactic Acid) and Acrylonitrile Butadiene Styrene. J. Appl. Polym. Sci. 2017, 134, 9, 44516 . DOI: https://doi.org/10.1002/app.44516.
- Li, H.; Huneault, M. A. Effect of Chain Extension on the Properties of PLA/TPS Blends. J. Appl. Polym. Sci. 2011, 122, 134–141. DOI: https://doi.org/10.1002/app.33981.
- Zhang, Y.; Yuan, X.; Liu, Q.; Hrymak, A. The Effect of Polymeric Chain Extenders on Physical Properties of Thermoplastic Starch and Polylactic Acid Blends. J. Polym. Environ. 2012, 20, 315–325. DOI: https://doi.org/10.1007/s10924-011-0368-3.
- Marinho, V. A. D.; Pereira, C. A. B.; Vitorino, M. B. C.; Silva, A. S.; Carvalho, L. H.; Canedo, E. L. Degradation and Recovery in Poly(Butylene Adipate-co-Terephthalate)/Thermoplastic Starch Blends. Polym. Test. 2017, 58, 166–172. DOI: https://doi.org/10.1016/j.polymertesting.2016.12.028.
- Tang, W.; Wang, H.; Tang, J.; Yuan, H. Polyoxymethylene/Thermoplastic Polyurethane Blends Compatibilized with Multifunctional Chain Extender. J. Appl. Polym. Sci. 2013, 127, 3033–3039. DOI: https://doi.org/10.1002/app.37538.
- Al-Itry, R.; Lamnawar, K.; Maazouz, A.; Billon, N.; Combeaud, C. Effect of the Simultaneous Biaxial Stretching on the Structural and Mechanical Properties of PLA, PBAT and Their Blends at Rubbery State. Eur. Polym. J. 2015, 68, 288–301. DOI: https://doi.org/10.1016/j.eurpolymj.2015.05.001.
- Al-Itry, R.; Lamnawar, K.; Maazouz, A. Biopolymer Blends Based on Poly (Lactic Acid): Shear and Elongation Rheology/Structure/Blowing Process Relationships. Polymers (Basel) 2015, 7, 939–962. DOI: https://doi.org/10.3390/polym7050939.
- Dong, W.; Zou, B.; Yan, Y.; Ma, P.; Chen, M. Effect of Chain-Extenders on the Properties and Hydrolytic Degradation Behavior of the Poly(Lactide)/Poly(Butylene Adipate-co-Terephthalate) Blends. Int. J. Mol. Sci. 2013, 14, 20189–20203. DOI: https://doi.org/10.3390/ijms141020189.
- Zhang, N.; Zeng, C.; Wang, L.; Ren, J. Preparation and Properties of Biodegradable Poly(Lactic Acid)/Poly(Butylene Adipate-co-Terephthalate) Blend with Epoxy-Functional Styrene Acrylic Copolymer as Reactive Agent. J. Polym. Environ. 2013, 21, 286–292. DOI: https://doi.org/10.1007/s10924-012-0448-z.
- Jaszkiewicz, A.; Bledzki, A. K.; Meljon, A. Online Observations and Process Analysis of Chain Extended Polylactides during Injection Moulding. Polym. Degrad. Stab. 2014, 101, 65–70. DOI: https://doi.org/10.1016/j.polymdegradstab.2014.01.009.
- Selatile, M. K.; Ojijo, V.; Sadiku, R.; Ray, S. S. Development of Bacterial-Resistant Electrospun Polylactide Membrane for Air Filtration Application: Effects of Reduction Methods and Their Loadings. Polym. Degrad. Stab. 2020, 178, 109205. DOI: https://doi.org/10.1016/j.polymdegradstab.2020.109205.
- Grassi, N.; Zaltieri, M. Method for Producing a Synthetic Yarn with High Moisture Regain and Yarn Obtained. U.S. Patent 2016/0271610 A1, 2016.
- Raffa, P.; Coltelli, M. B.; Castelvetro, V. Expanding the Application Field of Post-Consumer Poly(Ethylene Terephthalate) through Structural Modification by Reactive Blending. J. Appl. Polym. Sci. 2014, 131, n/a–11. DOI: https://doi.org/10.1002/app.40881.
- Mallet, B.; Lamnawar, K.; Maazouz, A. Compounding and Melt Strengthening of Poly(Lactic Acid): Shear and Elongation Rheological Investigations for Forming Process. KEM. 2013, 554-557, 1751–1756. DOI: https://doi.org/10.4028/www.scientific.net/KEM.554-557.1751.
- Mallet, B.; Lamnawar, K.; Maazouz, A. Improvement of Blown Film Extrusion of Poly(Lactic Acid): Structure-Processing-Properties Relationships. Polym. Eng. Sci. 2014, 54, 840–857. DOI: https://doi.org/10.1002/pen.23610.
- Sun, Q.; Mekonnen, T.; Misra, M.; Mohanty, A. K. Novel Biodegradable Cast Film from Carbon Dioxide Based Copolymer and Poly(Lactic Acid). J. Polym. Environ. 2016, 24, 23–36. DOI: https://doi.org/10.1007/s10924-015-0743-6.