References
- Ahmad R, Plapper P. 2015. Generation of safe tool-path for 2.5 D milling/drilling machine-tool using 3D ToF sensor. CIRP J Manuf Sci Technol. 10:84–91.
- Ahmad R, Tichadou S, Hascoet J-Y. 2016. Generation of safe and intelligent tool-paths for multi-axis machine-tools in a dynamic 2D virtual environment. Int J Comput Integr Manuf. 29(9):982–995.
- Ahmad R, Tichadou S, Hascoet JY. 2017. A knowledge-based intelligent decision system for production planning. Int J Adv Manuf Technol. 89(5–8):1717–1729. http://doi.org/10.1007/s00170-016-9214-z
- Aldana JC, Serpell A. 2013. Construction waste management system: a case study in a construction project in Chile. Proceedings of the 19th CIB World Building Congress; May 2013; 15(2010), 32–41.
- Avdzhieva A, Balabanov T, Evtimov G, Kirova D, Kostadinov H, Tsachev T, … Zlateva N. 2014. Optimal cutting problem. Retrieved from http://www.maths-in-industry.org/miis/692/
- Cadwork, SEMA. 2018. Design2machine - the data transfer interface for wood constructions - btl v10. Retrieved from http://design2machine.com/btl/ [accessed 2018 Jul 02].
- Cheng C, Feiring B, Cheng TC. 1994. The cutting stock problem — a survey. Int J Prod Econ. 36(3):291–305. http://doi.org/10.1016/0925-5273(94)00045-X
- Cherri AC, Arenales MN, Yanasse HH. 2013. The usable leftover one-dimensional cutting stock problem-a priority-in-use heuristic. Intl Trans Oper Res. 20(2):189–199. http://doi.org/10.1111/j.1475-3995.2012.00868.x
- Cui Y, Yang Y. 2010. A heuristic for the one-dimensional cutting stock problem with usable leftover. Eur J Oper Res. 204(2):245–250. http://doi.org/10.1016/j.ejor.2009.10.028
- Dikili AC, Sarıöz E, Pek NA. 2007. A successive elimination method for one-dimensional stock cutting problems in ship production. Ocean Eng. 34(13):1841–1849.
- Fayzrakhmanov RA, Murzakaev RT, Mezentsev AS, Shilov VS. 2014. Applying the greedy algorithm for reducing the dimensionality of the dynamic programming method in solving the one-dimensional cutting stock problem. Middle-East J Sci Res. 3(19):412–416.
- Garraffa M, Salassa F, Vancroonenburg W, Vanden Berghe G, Wauters T. 2016. The one‐dimensional cutting stock problem with sequence‐dependent cut losses. Intl Trans Oper Res. 23(1–2):5–24.
- Gilmore PC, Gomory RE. 1961. A linear programming approach to the cutting-stock problem. Oper Res. 9(6):849–859. http://doi.org/10.1287/opre.9.6.849
- Hinterding R, Khan L. 1995. Genetic algorithms for cutting stock problems: with and without contiguity. In: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Berlin, Heidelberg: Springer. Vol. 956, p. 166–186. http://doi.org/10.1007/3-540-60154-6_54
- Liang K-H, Yao X, Newton C, Hoffman D. 1998. Solving cutting stock problems by evolutionary programming. In Porto VW, Saravanan N, Waagen D, Eiben AE, editors. Evolutionary Programming VII: 7th International Conference, EP98 San Diego, California, USA; Mar 25–27, 1998 Proceedings. Berlin, Heidelberg: Springer. p. 755–764. http://doi.org/10.1007/BFb0040826
- Liu H. 2016. BIM-based automated planning for panelized construction in the light-frame building industry. doi.org. University of Alberta Libraries. Retrieved from https://era-library-ualberta-ca.login.ezproxy.library.ualberta.ca/files/cj38607172#.WYdgbIjythE
- Rabello Golfeto R, Moretti AC, Salles Neto LLD. 2008. A grasp metaheuristic for the ordered cutting stock problem. Ingeniare. Revista Chilena de Ingeniería. 16(3):421–427. http://dx.doi.org/10.4067/S0718-33052008000300005
- Ragsdale CT, Zobel CW. 2004. The ordered cutting stock problem. Decision sciences. Wiley Online Library. http://doi.org/10.1111/j.1540-5414.2004.02505.x
- Sinuany-Stern Z, Weiner I. 1994. The one dimensional cutting stock problem using two objectives. J Oper Res Soc. 45(2):231–236.
- Tam CM, Tam VWY, Chan JKW, Ng WCY. 2005. Use of prefabrication to minimize construction waste - a case study approach. Int J Constr Manage. 5(1):91–101. http://doi.org/10.1080/15623599.2005.10773069
- Tam VWY, Tam CM, Chan JKW, Ng WCY. 2006. Cutting construction wastes by prefabrication. Int J Constr Manage. 6(1):15–25. http://doi.org/10.1080/15623599.2006.10773079
- TJI® Joists 2018. Weyerhaeuser. Retrieved from https://www.weyerhaeuser.com/woodproducts/engineered-lumber/tji-joists/ [accessed 2018 Jul 02].
- Wang F-K, Liu F-T. 2014. Flexible stock allocation and trim loss control for cutting problem in the industrial-use paper production. Math Prob Eng. 2014:9 pages, Article ID 521386. http://dx.doi.org/10.1155/2014/521386
- Wäscher G, Haußner H, Schumann H. 2007. An improved typology of cutting and packing problems. Eur J Oper Res. 183(3):1109–1130. http://doi.org/10.1016/j.ejor.2005.12.047
- Weiss A; System and Method of Panelized Construction. 2005 Feb 15. United States Patent US 6,854,218.
- Yeheyis M, Hewage K, Alam MS, Eskicioglu C, Sadiq R. 2013. An overview of construction and demolition waste management in Canada: a lifecycle analysis approach to sustainability. Clean Techn Environ Policy. 15(1):81–91.
- Zhao H. 2015. Automation of quantity takeoff and material optimization for residential construction manufacturing. J Oper Res Soc. Palgrave Macmillan UK. Retrieved from http://link.springer.com/10.1057/jors.1994.28.