568
Views
15
CrossRef citations to date
0
Altmetric
Articles

Manufacturing technology in terms of digital fabrication of contemporary biomimetic structures

, &

References

  • Anderson PW. 1972. More is different. Science. 177(4047):393–396.
  • Ayres P. 2006. Constructing the specific. In Oosterhuis K, Feireiss, L, editors. Game set and Match II: on computergames, advanced geometries and digital technologies. Netherlands; p. 314–321.
  • Balaguer C, Abderrahim M. 2008. Trends in robotics and automation in construction. In Robotics and automation in construction.
  • Bonenberg W, Giedrowicz M, Radziszewski K. 2019. Współczesne Projektowanie Parametryczne (eng. Contemporary Parametric Design). Poznań: Wydawnictwo Politechniki Poznańskiej.
  • Burger J, Lloret-Fritschi E, Taha N, Scotto F, Demoulin T, Mata-Falcón J, Gramazio F, Kohler M, Flatt RJ. 2020. Design and fabrication of a non-standard, structural concrete column using eggshell: ultra-thin, 3D printed formwork. In Salet FP, editor. Second RILEM International Conference on Concrete and Digital Fabrication. Vol. 28. Springer; p. 1104–1115.
  • Burry M, Burry J. 2016. Prototyping for architects. London: Thames & Hudson.
  • Chen Z-R, Lim C, Shao W-Y. 2015. Comparisons of practice progress of digital design and fabrication in free-form architecture. J Ind Prod Eng. 32(2):121–132.
  • Choi JO, Chen XB, Kim TW. 2019. Opportunities and challenges of modular methods in dense urban environment. Int J Constr Manage. 2:93–105.
  • Colic-Damjanovic V-M, Gadjanski I. 2016. Potentials of fablabs for biomimetic architectural research. International Conference Multidisciplinary Engineerign Design Optimisation (MEDO), Belgrade. p. 1–6.
  • Coupek D, Kovaleva D, Christof H, Wurst K-H, Verl A, Sobek W, Haase W, Gresser GT, Lechler A. 2016. Fabrication of biomimetic and biologically inspired (modular) structures for use in the construction industry. In Knippers J, Nickel KG, Speck T, editors. Biomimetic research for architecture and building construction. Cham, Switzerland: Springer International Publishing. p. 319–340.
  • Da Silveira G, Borenstein D, Fogliatto FS. 2001. Mass customization: Literature review and research directions. Int J Prod Econ. 72(1):1–13.
  • Dixit S, Kaaraayaarthi S. 2020. n Empirical study of major factors affecting productivity of construction projects. In Babu GK, Rao SH, Amarnath Y, editors. Emerging trends in civil engineering. p. 121–129.
  • Dixit S. 2020. Study of factors affecting the performance of construction projects in AEC industry. Organization Technol Manage Constr. 12(1):2275–2282.
  • Dixit S. 2021. Impact of management practices on construction productivity in Indian building construction projects: An empirical study. Organization Technol Manage Constr. 13(1):2383–2390.
  • Dixit S, Stefańska A, Musiuk A. 2021. Architectural form finding in arboreal supporting structure optimisation. Ain Shams Eng J. 12(2):2321–2329.
  • Dixit S, Stefańska A, Musiuk A, Singh P. 2021. Study of enabling factors affecting the adoption of ICT in the Indian built environment sector. Ain Shams Eng J. 12(2):2313–2319.
  • Elashry K, Glynn R. 2014. An approach to automated construction using adaptive programing. Robotic Fabrication Architect. 51–66.
  • Ertelt C, Shea K. 2008. Generative design and CNC fabrication using shape grammars. 34th Design Automation Conference, Parts A and B. New York: ASMEDC.
  • Freitas JA, Sanquetta CR, Iwakiri S, Maron da Costa MD. 2021. The use of wood construction materials as a way of carbon storage in residential buildings in Brazil. Int J Constr Manage. 21(3):292–298.
  • Gámez O, Meyer J, Bignon JC, Duchanois G. 2015. Interaction of analogic and digital workflows for architectural design and production. Adv Mater Res. 2337–2343.
  • Gehry F, Lloyd M, Shelden D. 2020. Empowering design: Gehry partners, Gehry technologies and architect‐led industry change. Archit Des. 90(2):14–23.
  • Gero JS. 2000. Computational models of innovative and creative design processes. Technol Forecast Soc Change. 64(2–3):183–196.
  • Halfawy M, Froese T. 2005. Building integrated architecture/engineering/construction systems using smart objects: methodology and implementation. J Comput Civ Eng. 19(2):172–181.
  • Januszkiewicz K. 2013. Digital designing and digital fabrication. Archivolta(1). 36–45.
  • Kaiser A, Larsson M, Girhammar UA. 2019. From file to factory: innovative design solutons for multi-storey timber buildings applied to project Zembla in Kalmar, Sweden. Frontiers Architect Res. 8(1):1–16. https://doi.org/10.1016/j.foar.2018.12.001.
  • Keating S. 2014. Beyond 3D printing: the new dimensions of additive fabrication. In Designing for emerging technologies: UX for genomics, robotics, and the internet of things. p. 379–405.
  • Keating S, Oxman N. 2013. Robotic immaterial fabrication. Robotic Fabrication Architect Art Des. 2012:256–266.
  • Klinger KR, Vermillion J. 2006. Visualizing the operative and analytic: representing the digital fabrication feedback loop and managing the digital exchange. Int J Architect Comput. 3:79–97.
  • Kontovourkis O, Tryfonos G, Georgiou C. 2019. Robotic additive manufacturing (RAM) with clay usinng topology optimization principles for toolpath planning: the example of a building element. Architect Sci Rev. https://doi.org/10.1080/00038628/2019.1620170.
  • Kotnik T. 2020. Research culture in architecture. In Leopold C, Robeller C, Weber U, editors. Cross-disciplinary collaboration. Berlin: Birkhauser.
  • Leibinger B. 2009. An atlas of fabrication. London: Architectural Associacion Publications.
  • Leibinger B. 2010. New structuralism: design, engineering and architectural technologies. In Oxman R, Oxman R, editors. Architectural design. Vol. 80(4). p. 14–23.
  • Lloret E, Shahab AR, Linus M, Flatt RJ, Gramazio F, Kohler M, Langenberg S. 2015. Complex concrete structures: merging existing casting techniques with digital fabrication. Comput-Aided Des. 60:40–49.
  • Maleczek R, Stern G, Mezlet A, Preisinger C. 2019. Large scale curved folding mechanisms. In Gengnagel C, Baverel O, Burry J, Thomsen MR, Weinzierl Szerk. S, editors. Impact: design with all senses. Berlin: Springer. p. 539–553.
  • Megahed NA. 2015. Digital realm: parametric-enabled paradigm in architectural design process. IJAEC. 4(3):174–183.
  • Menges A. 2012. Biomimetic design process in architecture: morphogenetic and evolutionary computational design. Bioinspir Biomim. 7(1):015003.
  • Menges A. 2013. Morphospaces of robotic fabrication from theoretical morphology to design computation and digital fabrication in architecture. In Brell-Çokcan S, Braumann J, editors. Rob | Arch 2012 Robotic Fabrication in Architecture, Art, and Design. Springer. p. 28–47.
  • Mensah S, Ayarkwa J, Nani G. 2020. A theoretical framework for conceptualizing contractors' adaptation to environmentally sustainable construction. Int J Constr Manage. 20(7):801–811.
  • Michael M. 2008. From control to design: parametric/algorithmic architecture. In Sakamoto T, Ferre A, Kubo M, editors. New York: ActarD Inc.
  • Mitropoulou I, Araza I, Bernhard M, Dillenburger B, Gramazio F, Kohler M. 2019. Numerical sculpting: volumetric modelling tools for in place spatial additive manufacturing. In Gengnagel C, Baverel O, Thomsen MR, Weinzierl S, editors. Impact: design with all senses. Springer. p. 132–145.
  • Monteiro PJM, Miller SA, Horvath A. 2017. Towards sustainable concrete. Nat Mater. 16(7):698–699.
  • Ochoa KS, Ohlbrock PO, D'Acunto P, Moosavi V. 2020. Beyond typologies, beyond optimization: exploring novel structural forms at the interface of human and machine intelligence. Int J Architect Comput. 1–25.
  • Oxman R. 2017. Parametric design thinking. Design Stud. 52:1–3.
  • Pantazis E, Gerber DJ. 2019. Beyond geometric complexity: a criterial rewiew of complexity theory and how it relates to architecture engineering and constructuin. Architect Sci Rev. 62(5):371–388.
  • Papamanolis A. 2018. Prototyping and architectural education, an examinanion of the role of prototypes in the design process. Forrás: Research Gate.
  • Pawlyn M. 2016. Biomimicry in architecture. London: RIBA Publishing.
  • Perkins I, Skitmore M. 2015. Three-dimensional printing in the construction industry: A review. Int J Constr Manage. 15(1):1–9.
  • Pottmann H. 2013. Architectural geometry and fabrication-aware design. Nexus Netw J. 15(2):195–208.
  • Rian IM, Sassone M. 2014. Tree-inspired dendriforms and fractal-like branching structures in architecture: a brief historical overview. Frontiers Architect Res. 3(3):298–323.
  • Rippmann M, Liew A, Van Mele T, Block P. 2018. Design, fabrication and testing of discrete 3D. Mater Today Commun. 15:254–259.
  • Schulz R, Talbot B, Lam O, Dayoub F, Corke P, Upcroft B, Wyeth G. 2015. Robot navigation using human cues: a robot navigation system for. 2015 IEEE International Conference on Robotics and Automation (ICRA), Washington.
  • Shah MN, Dixit S, Kumar R, Jain R, Anand K. 2021. Causes of delays in slum reconstruction projects in India. Int J Constr Manage. 21(5):452–467.
  • Singh A, Agarwal P, Dixit S, Singh S, Sahai S. 2018. The transition towards sustainable supply chain management: an empirical study. MATEC Web Conf. 172:05001.
  • Sequin CH. 2008. Algorithmically acquired architectural and artistic artefacts. Vienna.
  • Shadkhou S, Bignon JC. 2009. Design, fabrication,digital - between digital design and digital fabrication. In The new realm of architectural design. Istambul.
  • Sitnikov V. 2017. Ice formwork for ultra-high performance concrete: simulation of ice melting deformations. In De Rycke K, Gengnagel C, Baverel O, Burry J, Mueller C, Nguyen MM, Rahm P, Thomsen MR, editors. Humanizing digital reality. Paris: Springer. p. 395–406.
  • Tamke M, Burry M, Ayres P, Burry J, Thomsen MR. 2012. Design environments for material performance. In Gengnagel C, Kilian A, Palz N, Scheurer F, editors. Computational design modelling. Berlin: SpringerLink Books.
  • Vazquez AN, Jabi W. 2017. Inwestigations in robotic-assisted design: strategies for symbiotic agencies in material-directed generative design processes. Int J Architect Comput. 15(1):70–86.
  • Wasim M, Serra PV, Ngo TD. 2020. Design for manufacturing and assembly for sustainable, quick and cost-effective prefabricated construction – a review. Int J Constr Manage. 1–9.
  • Weinstock M. 2004. Morphogenesis and the mathematics of emengence. Architect Des. 74(3):10–17.
  • Wong PS, Holdsworth S, Crameri L, Lindsay A. 2019. Does carbon accounting have an impact on decision-making in building design? Int J Constr Manage. 19(2):149–161.
  • World Business Council for Sustainable Development. 2002. The cement sustainability initiative: Oou Agenda for Action. Technical report. WBCSD.
  • Yazici S, Tanacan L. 2018. A study towards interdisciplinary research: a material-based integrated computational design model (MICD-m) in architecture. Architect Sci Rev. 61(1–2):68–82.
  • Yuan P, Yan C. 2020. Collaborative networks of robotic construction. Archit Des. 90(2):74–81.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.