Thermal stability enhancement of poly(hydroxybutyrate-co-hydroxyvalerate) through in situ reaction

References

• Chen Y, Chou IN, Tsai Y-H, et al. Thermal degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in drying treatment. J Appl Polym Sci. 2013;130:3659–3667.
   Web of Science ®Google Scholar
• Xiang H, Wen X, Miu X, et al. Thermal depolymerization mechanisms of poly(3-hydroxybutyrate-co-3-hydroxyvalerate). Prog Nat Sci Mater Int. 2016;26(1):58–64.
   Web of Science ®Google Scholar
• Aoyagi Y, Yamashita K, Doi Y. Thermal degradation of poly[(R)-3-hydroxybutyrate], poly[ε-caprolactone], and poly[(S)-lactide]. Polym Degrad Stab. 2002;76(1):53–59.:
   Web of Science ®Google Scholar
• Arza CR, Jannasch P, Johansson P, et al. Effect of additives on the melt rheology and thermal degradation of poly[(R)-3-hydroxybutyric acid]. J Appl Polym Sci. 2015;132:15.
   Web of Science ®Google Scholar
• Bousfield G Effect of chain extension on rheology and tensile properties of PHB and PHB-PLA blends. 2014.
   Google Scholar
• Chen B-K, Lo SH, Shih CC, et al. Improvement of thermal properties of biodegradable polymer poly(3-hydroxybutyrate) by modification with acryloyloxyethyl isocyanate. Polym Eng Sci. 2012;52: DOI:https://doi.org/10.1002/pen.23099
   Google Scholar
• Duangphet S, Szegda D, Song J, et al. The effect of chain extender on poly(3-hydroxybutyrate-co-3-hydroxyvalerate): thermal degradation, crystallization, and rheological behaviours. J Polym Environ. 2014;22(1):1–8.
   Web of Science ®Google Scholar
• Liu Q-S, Zhu M-F, Wu W-H, et al. Reducing the formation of six-membered ring ester during thermal degradation of biodegradable PHBV to enhance its thermal stability. Polym Degrad Stab. 2009;94:18–24.
   Web of Science ®Google Scholar
• Rezaei A, Kontopoulou M. Chain extended poly(3-hydroxybutyrate) with improved rheological properties and thermal stability, through reactive modification in the melt state. Polym Degrad Stab. 2015;121: DOI:https://doi.org/10.1016/j.polymdegradstab.2015.09.008.
   Google Scholar
• Zheng T, Zhang Z, Shukla S, et al. PHBV-graft-GMA via reactive extrusion and its use in PHBV/nanocellulose crystal composites. Carbohydr Polym. 2019;205:27–34.
   PubMed Web of Science ®Google Scholar
• Fei B, Chen C, Chen S, et al. Crosslinking of poly[(3‐hydroxybutyrate)‐co‐(3‐hydroxyvalerate)] using dicumyl peroxide as initiator. Poly Int. 2004;53:937–943.
   Web of Science ®Google Scholar
• Zhao X, Cornish K, Vodovotz Y. Synergistic mechanisms underlie the peroxide and coagent improvement of natural-rubber-toughened poly(3-hydroxybutyrate-co-3-hydroxyvalerate) mechanical performance. Polymers. 2019;11:565.
   Web of Science ®Google Scholar
• Immirzi B, Malinconico M, Orsello G, et al. Blends of biodegradable polyesters by reactive blending: preparation, characterisation and properties. J Mater Sci. 1999;34(7):1625–1639.
   Web of Science ®Google Scholar
• George KE, Varghese S, Rajan R. Role of coagents in peroxide vulcanization of natural rubber. Rubber Chem Technol. 2013;86(3):488–502.
   Web of Science ®Google Scholar
• Henning SK, In CR. Fundamentals of curing elastomers with peroxides and coagents I: coagent structure-property relationships, 167th technical meeting of the rubber division. Am Chem Soc. 2005;2005:16–18.
   Google Scholar
• Oner M, Kizil G, Keskin G, et al. The effect of boron nitride on the thermal and mechanical properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate). Nanomaterials (Basel). 2018;8:11.
   Google Scholar
• Souza Junior OF, Staffa LH, Costa LC, et al. Thermal and rheological behavior of binary blends of poly(hydroxybutyrate-co-hydroxyvalerate) and poly(ethylene-co-vinyl acetate) with different vinyl acetate content. Macromol Symp. 2019;383:1.
   Google Scholar
• Wang S, Chen W, Xiang H, et al. Modification and potential application of short-chain-length polyhydroxyalkanoate (SCL-PHA). Polymers (Basel). 2016;8:8.
   Web of Science ®Google Scholar
• Bhattacharyya A, Pramanik A, Maji S, et al. Utilization of vinasse for production of poly-3-(hydroxybutyrate-co-hydroxyvalerate) by Haloferax mediterranei. AMB Express. 2012;2:34.
   PubMed Web of Science ®Google Scholar
• Elsawy M, Saad G, Elsabee M. Grafting of N-isopropyl acrylamide onto bacterial polyhydroxybutrate/hydroxyvalerate copolymers. Polym-Plast Technol Eng. 2011;50:1055–1063.
   Web of Science ®Google Scholar
• Li H, Li W, Wu H, et al. Synthesis and application of a thermoplastic plate of poly(lactide-epsilon-caprolactone) for radiation therapy. Biomolecules. 2019;10:1.
   Web of Science ®Google Scholar
• Bai J, Dai J, Li G. Electrospun composites of PHBV/pearl powder for bone repairing. Prog Nat Sci Mater Int. 2015;25(4):327–333.
   Web of Science ®Google Scholar
• Niu Y-H, Liang W-B, Zhang Y-L, et al. Crosslinking kinetics of polyethylene with small amount of peroxide and its influence on the subsequent crystallization behaviors. Chin J Polym Sci. 2016;34(9):1117–1128.
   Web of Science ®Google Scholar
• Zhang X-H, Yang H-M, Song Y-H, et al. Influence of crosslinking on physical properties of low density polyethylene. Chin J Polym Sci. 2012;30(6):837–844.
   Web of Science ®Google Scholar
• Khankrua R, Pivsa-Art S, Hiroyuki H, et al. Effect of chain extenders on thermal and mechanical properties of poly(lactic acid) at high processing temperatures: potential application in PLA/polyamide 6 blend. Polym Degrad Stab. 2014;108:232–240.
   Web of Science ®Google Scholar
• Arruda LC, Magaton M, Bretas RES, et al. Influence of chain extender on mechanical, thermal and morphological properties of blown films of PLA/PBAT blends. Polym Test. 2015;43:27–37.
   Web of Science ®Google Scholar
• Al-Itry R, Lamnawar K, Maazouz A. Reactive extrusion of PLA, PBAT with a multi-functional epoxide: physico-chemical and rheological properties. Eur Polym J. 2014;58:90–102.
   Web of Science ®Google Scholar