297
Views
6
CrossRef citations to date
0
Altmetric
Research Papers

A revisit of different models for flow resistance in gravel-bed rivers and hydraulic flumes

, &
Pages 277-286 | Received 18 Nov 2016, Accepted 22 Jan 2017, Published online: 21 Feb 2017

References

  • Adenlof, K. A. and Wohl, E. E., 1994. Controls on bed load movement in a subalpine Stream of the Colorado Rocky Mountains, U.S.A. Journal of Arctic and Alpine Research, 26 (1), 77–85. doi: 10.2307/1551881
  • Afzalimehr, H., et al., 2011. Field investigation on friction factor in mountainous cobble-bed and boulder-bed rivers. International Journal of Sediment Research, 26 (2), 210–221. doi: 10.1016/S1001-6279(11)60087-5
  • Andrews, E.D., 1994. Marginal bed load transport in a gravel bed stream, Sagehen Creek, California. Journal of Water Resources Research, 30, 2241–2250. doi:10.1029/94WR00553
  • Barnes, H.H., 1967. Roughness characteristics of natural channels. Water Supply, Paper 1849. United States Geological Survey, 213–214.
  • Bathurst, J.C., 1978. Flow resistance of large-scale roughness. Journal of Hydraulic Division, ASCE, 104 (12), 1587–1603.
  • Bathurst, J.C., 1985. Flow resistance estimation in mountain rivers. Journal of Hydraulic Engineering, ASCE, 111 (4), 625–643. doi: 10.1061/(ASCE)0733-9429(1985)111:4(625)
  • Bathurst, J.C., 2002. At-a-site variation and minimum flow resistance for mountain rivers. Journal of Hydrology, 269 (1–2), 11–26. doi: 10.1016/S0022-1694(02)00191-9
  • Bray, D.I., 1979. Estimating average velocity in gravel-bed rivers. Journal of Hydraulic Division, ASCE, 105 (9), 1103–1122.
  • Charlton, F.G., Brown, P.M., and Benson, R.W., 1978. The hydraulic geometry of some gravel rivers in Britain. Report IT180. Wallingford: Hydraulics Research Station.
  • Church, M. and Rood, K., 1983. Catalogue of alluvial channel regime data. Department of Geography, University of British Columbia, 99–100. Available from: http://www.nced. umn.edu/ [Accessed September 2010].
  • Colin, R.T. and Zevenbergen, L.W, 1985. Estimating mean velocity in mountain rivers. Journal of Hydraulic Engineering, 111(4), 612–624. doi: 10.1061/(ASCE)0733-9429(1985)111:4(612)
  • Colosimo, C., Copertino, V., and Veltri, M., 1988. Friction factor evaluation in gravel-bed rivers. Journal of Hydraulic Engineering, ASCE, 114 (8), 861–876. doi: 10.1061/(ASCE)0733-9429(1988)114:8(861)
  • Constantinescu, G., Garcia, M., and Hanes, D., 2016. River Flow 2016. ISBN 9781138029132 – CAT# K27572.
  • Coon, W.F., 1998. Estimation of roughness coefficients for natural stream channels with vegetated banks. Water Supply, Paper 2441. United States Geological Survey, 133.
  • David, G.C.L., et al., 2010. Controls on at-a-station hydraulic geometry relationships in steep headwater streams. Earth Surface Processes and Landforms, 35, 1820–1837. doi:10.1002/esp.2023
  • Emmett, W.W. and Seitz, H.R., 1973. Suspended and bed load sediment transport in the snake and clearwater rivers in the vicinity of Lewiston, Idaho. Basic-Data Report, W05427. U.S. Geological Survey, 1–12. doi:10.1029/2006WR005422
  • Ferguson, R., 2007. Flow resistance equations for gravel and boulder bed streams. Journal of Water Resources Research, 43 (5). doi:10.1029/2006WR005422
  • Ferguson, R., 2010. Time to abandon the Manning equation? Earth Surface Processes Landforms, 35, 1873–1876. doi: 10.1002/esp.2091
  • French, R. 1985. Open-channel hydraulics. Stuttgart: McGraw-Hill.
  • Frye, C., 2016. Microsoft Excel 2016 step by step. Microsoft Press, 2015, ISBN 9780735698802.
  • Griffiths, G., 1981. Flow resistance in coarse gravel bed rivers. Journal of Hydraulic Division, ASCE, 107 (7), 899–918.
  • Habibi, M., Namaee, M.R., and Saneie, M., 2014. An experimental investigation to calculate flow resistance in a steep river. Journal of KSCE, 18 (4), 1176–1184. doi:10.1007/s12205-014-0006-4
  • Hey, R.D., 1979. Flow resistance in gravel-bed rivers. Journal of the Hydraulic Division, ASCE, 105 (4), 365–379.
  • Hey, R.D. and Thorne, C.R., 1986. Stable channels with mobile gravel beds. Journal of Hydraulic Engineering, 112 (8), 671–689. doi: 10.1061/(ASCE)0733-9429(1986)112:8(671)
  • Hicks, D.M. and Mason, P.D., 1991. Roughness characteristics of New Zealand rivers: a Handbook for assigning hydraulic roughness coefficients to river reaches by the “visual comparison” approach. Wellington, NZ: Water Resources Survey.
  • Hicks, D.M. and Mason, P.D., 1998. Roughness characteristics of New Zealand rivers: National Institute of Water and Atmospheric Research Ltd., Water Resources Publications, LLC, 329 p.
  • Higginson, N.N.J. and Johnston, H.T., 1988. Estimation of friction factor in natural streams. In: W.R. White, ed. Proceedings of the international conference on river regime. New York: John Wiley, 251–266.
  • Jarrett, R. D. 1984. Hydraulics of high-gradient streams. Journal of Hydraulic Engineering, 110 (11), 1519–1539. doi: 10.1061/(ASCE)0733-9429(1984)110:11(1519)
  • Jaquith, S. and Kline, M., 2006. Vermont regional hydraulic geometry curves. River Management Program. Vermont Department of Environmental Conservation.
  • Kellerhals, R., Neill, C.R., and Bray, D.I., 1972. Hydraulic and geomorphic characteristics of rivers in Alberta. River engineering and surface hydrology report, vol. 72, no. 1. Research Council of Alberta, 52 p.
  • Keulegan, G.H., 1938. Laws of turbulent flow in open channels. Journal of Research of the National Institute of Standards and Technology, 21 (6), 707–741. doi: 10.6028/jres.021.039
  • Knighton, D., 1998. Fluvial forms and processes: a new perspective. London: Arnold, 383 p.
  • Lane, E. W. and Carlson, E. J., 1953. Some factors affecting the stability of canals constructed in coarse granular materials. Proceedings of the Minnesota International Hydraulics Convention, Section: Basic Relationship of Sediment Transportation by Flowing Water, 37–48.
  • Lee, A.J. and Ferguson, R.I., 2002. Velocity and flow resistance in step pool streams. Journal of Geomorphology, 46 (1–2), 59–71. doi: 10.1016/S0169-555X(02)00054-5
  • Lenzi, M. A., D’Agostino, V., and Billi, P., 1999. Bedload transport in the instrumented catchment of the Rio Cordon Part I: analysis of bedload records, conditions and threshold of bedload entrainment. Catena, 36(3), 171–190. doi: 10.1016/S0341-8162(99)00016-8
  • Leopold, L.B. and Emmett, W.W., 1976. Bed load measurements, East Fork River, Wyoming. Proceedings of the National Academy of Sciences, 73 (4), 1000–1004. doi: 10.1073/pnas.73.4.1000
  • Leopold, L. B. and Emmett, W. W., 1977, Bedload measurements, East Fork River, Wyoming. Proceedings of the National Academy of Sciences, 74 (7), 2644–2648. doi: 10.1073/pnas.74.7.2644
  • Lepp, L.R., Koger, C.J., and Wheeler, J.A., 1993. Channel erosion in steep gradient, gravel-paved streams. Bulletin of the International Association of Engineering Geology, 4, 443–454.
  • Limerinos, J.T., 1970. Determination of the Manning coefficient from measured bed roughness in natural channels. Water Supply Paper 1898-B. United States Geological Survey, 47 p.
  • MacFarlane, W.A. and Wohl, E.E., 2003. Influence of step composition on step geometry and flow resistance in step-pool streams of the Washington Cascades. Journal of Water Resources Research, 39 (2), 1037. doi:10.1029/2001WR001238
  • Mashau, S.M., 2006. Flow resistance in open channels with intermediate scale roughness. Master’s thesis. Faculty of Engineering and the Built Environment, University of Witwatersrand.
  • Maynord, S.T., 1991. Flow resistance of riprap. Journal of Hydraulic Engineering, ASCE, 117 (6), 687–696. doi: 10.1061/(ASCE)0733-9429(1991)117:6(687)
  • Meyer-Peter, E. and Müller, R., 1948. Formulas for bed load transport. Proceedings of the 2nd meeting of the International Association of Hydraulic Structures Research, Stockholm, International Association for Hydraulic Structure Research, Delft, 39–64.
  • Orlandini, S., et al., 2006. Field determination of the spatial variation of resistance to flow along a steep Alpine stream, Hydrological Processes, 20 (18), 3897–3913. doi: 10.1002/hyp.6163
  • Parker, G., et al., 2003. Effect of floodwater extraction on mountain stream morphology. Journal of Hydraulic Engineering, 129 (11), 885–895. doi: 10.1061/(ASCE)0733-9429(2003)129:11(885)
  • Pitlick, J. and Cress, R., 2002. Downstream changes in the channel of a large gravel bed river. Journal of Water Resources Research, 38 (10), 1216. doi:10.1029/2001WR000898
  • Recking, A., et al., 2008. Feedback between bed load and flow resistance in gravel and cobble bed rivers. Journal of Water Resources Research, 44, W05412. doi:10.1029/2007WR006219
  • Reid, D.E. and Hickin, E.J., 2008. Flow resistance in steep mountain streams. Earth Surface Processes and Landforms, 33, 2211–2240. doi: 10.1002/esp.1682
  • Reid, I., Laronne, J.B., and Powell, D.M., 1995. The Nahal Yatir bed load database: sediment dynamics in a gravel-bed ephemeral stream. Earth Surface Processes and Landforms, 20, 845–857. doi: 10.1002/esp.3290200910
  • Rickenmann, D. and Recking, A., 2011. Evaluation of flow resistance in gravel-bed rivers through a large field data set. Journal of Water Resources Research, 47 (7), W07538. doi:10.1029/2010WR009793
  • Ryan, S.E., Porth, L.S., and Troendle, C.A., 2002. Defining phases of bed load transport using piecewise regression streams. Earth Surface Processes and Landforms, 27, 971–990. doi: 10.1002/esp.387
  • Samide, G.W., 1971. Sediment transport measurements. Thesis (PhD). University of Alberta.
  • Strickler A., 1923. Beiträge zur Frage der Geschwindigkeitsformel und der Rauhigkeitszahlen fur Ströme, Kanäle und Geschlossene Leitungen, Berna.
  • Thorne, C.R. and Zevenbergen, L.W., 1985. Estimating mean velocity in mountain rivers. Journal of Hydraulic Engineering, ASCE, 111, 612–624. doi: 10.1061/(ASCE)0733-9429(1985)111:4(612)
  • Ugarte, A.Y. and Mendez, R., 1994. Resistencia al flujo en ríos de montaña. Actas del XVI Congreso Latinoamericano de Hidráulica, Santiago, Chile, 503–514. 
  • Wargadalam, J., 1993. Hydraulic geometry equation of alluvial channels. PhD dissertation. Colorado State University.
  • Wilcox, A., Nelson, J.M., and Wohl, E.E., 2006. Flow resistance dynamics in step-pool channels: 2. Partitioning between grain, spill and woody debris resistance. Journal of Water Resources Research, 42, W05419. doi:10.1029/2005WR004278
  • Williams, G.P. and Rosgen, D.L., 1989. Measured total sediment loads (suspended loads and bedloads) for 93 United States streams. United States Geological Survey, Report 67–89. 
  • Yochum, S., 2010. Low resistance estimation in high gradient streams. The 4th federal interagency hydrologic modeling conference, 27 June–1 July 2010, Riviera Hotel, Las Vegas, NV.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.