Evaluation and refinement of closely spaced buildings’ performance under near-fault ground motions

References

• Agarwal, V., Niedzwecki, J., & va de Lindt, J.W. (2007). Earthquake induced pounding in friction varying base isolated buildings. Engineering Structures, 29, 2825–2832.
   Web of Science ®Google Scholar
• American Association of State Highway and Transportation Officials LRFD. (2005). Bridge design specifications, SI units (3rd ed.). Washington, DC: Author.
   Google Scholar
• Anagnostopoulos, S. (1988). Pounding of buildings in series during earthquakes. Earthquake Engineering and Structural Dynamics, 16, 443–456.
   Web of Science ®Google Scholar
• Computers and Structures, Inc. (2012). SAP2000, Release 15.1.0 documentation. Berkeley, CA: Author.
   Google Scholar
• Der Kiureghian, A. (1980). Structural response to stationary excitation. ASCE Journal of the Engineering Mechanics Division, 106, 1195–1213.
   Web of Science ®Google Scholar
• Grigoriu, M. (1981). Mean-square structural response to stationary ground acceleration. ASCE Journal of the Engineering Mechanics Division, 107, 969–986.
   Web of Science ®Google Scholar
• Ismail, M. (2009). An innovative isolation device for aseismic design. (PhD thesis. Technical University of Catalonia, Barcelona, Spain). Retrieved November 10, 2009, from http://www.tdx.cat/handle/10803/6265.
   Google Scholar
• Ismail, M. (2014). Inner pounding control of the RNC isolator and its impact on seismic isolation efficiency under near-fault earthquakes. Journal of Engineering Structures, accepted for publication. 10.1016/j.engstruct.2014.12.041.
   Google Scholar
• Ismail, M., Casas, J., & Rodellar, J. (2013). Near-fault isolation of cable-stayed bridges using RNC isolator. Engineering Structures, 56, 327–342.
   Web of Science ®Google Scholar
• Ismail, M., Ikhouane, F., & Rodellar, J. (2009). The hysteresis Bouc–Wen model, a survey. Journal of Archives of Computational Methods in Engineering, 16, 161–188.
   Web of Science ®Google Scholar
• Ismail, M., & Rodellar, J. (2013). A mechanical extension for Stewart platform (Hexapod). Patent No. P201331348. Madrid, Spain: Spanish Office of Patents and Marks.
   Google Scholar
• Ismail, M., & Rodellar, J. (2014a). Experimental mechanical characterization of a rolling-based seismic isolation system. In The 6th world conference on structural control and monitoring (6WCSCM), July 15–17, Barcelona, Spain, pp. 1148–1157.
   Google Scholar
• Ismail, M., & Rodellar, J. (2014b). Experimental mechanical characterization of a rolling-based seismic isolation system. Engineering Structures, submitted for publication.
   Google Scholar
• Ismail, M., & Rodellar, J. (2014c). A multi-purpose testing platform using HEXAPOD. In The 6th world conference on structural control and monitoring (6WCSCM), July 15–17, Barcelona, Spain, pp. 1045–1056.
   Google Scholar
• Ismail, M., Rodellar, J., & Ikhouane, F. (2010). Method for the seismic isolation of a supported object. Spanish Patents No. WO2010000897A1, PCT/ES2009/000351. Madrid, Spain: Spanish Office of Patents and Marks.
   Google Scholar
• Ismail, M., Rodellar, J., & Ikhouane, F. (2009a). An innovative isolation bearing for motion-sensitive equipment. Journal of Sound and Vibration, 326, 503–521.
   Web of Science ®Google Scholar
• Ismail, M., Rodellar, J., & Ikhouane, F. (2009b). Performance of structure-equipment systems with a novel roll-n-cage isolation bearing. Computers and Structures, 87, 1631–1646.
   Web of Science ®Google Scholar
• Ismail, M., Rodellar, J., & Ikhouane, F. (2010). An innovative isolation device for aseismic design. Engineering Structures, 32, 1168–1183.
   Web of Science ®Google Scholar
• Ismail, M., Rodellar, J., & Ikhouane, F. (2012). Seismic protection of low- to moderate-mass buildings using RNC isolator. Structural Control and Health Monitoring, 19, 22–42.
   Web of Science ®Google Scholar
• Ismail, M., Rodellar, J., & Pozo, F. (2014). An isolation device for near-fault ground motions. Structural Control and Health Monitoring, 21, 249–268.
   Web of Science ®Google Scholar
• Jangid, R., & Kelly, J. (2001). Base isolation for near-fault motions. Earthquake Engineering and Structural Dynamics, 30, 691–707.
   Web of Science ®Google Scholar
• Jeng, V., Kasai, K., & Maison, B. (1992). A spectral difference method to estimate building separations to avoid pounding. Earthquake Spectra, 8, 201–223.
   Google Scholar
• Komodromos, P. (2008). Simulation of the earthquake-induced pounding of seismically isolated buildings. Computers and Structures, 86, 618–626.
   Web of Science ®Google Scholar
• Makris, N., & Black, C. (2004). Evaluation of peak ground velocity as a good intensity measure for near-source ground motions. ASCE Journal of Engineering Mechanics, 130, 1032–1044.
   Web of Science ®Google Scholar
• Makris, N., & Chang, S. (2000). Effect of viscous, viscoplastic and friction damping on the response of seismic isolated structures. Earthquake Engineering and Structural Dynamics, 29, 85–107.
   Web of Science ®Google Scholar
• Matsagar, V., & Jangid, R. (2003). Seismic response of base-isolated structures during impact with adjacent structures. Engineering Structures, 25, 1311–1323.
   Web of Science ®Google Scholar
• Murat, D., & Srikanth, B. (2007). Equivalent linear analysis of seismic-isolated bridges subjected to near-fault ground motions with forward rupture directivity effect. Engineering Structures, 29, 21–32.
   Web of Science ®Google Scholar
• Pant, D., & Wijeyewickrema, A. (2012). Structural performance of a base-isolated reinforced concrete building subjected to seismic pounding. Earthquake Engineering and Structural Dynamics, 41, 1709–1716.
   Web of Science ®Google Scholar
• Penzien, J. (1997). Evaluation of building separation distance required to prevent pounding during strong earthquakes. Earthquake Engineering and Structural Dynamics, 26, 849–858.
   Web of Science ®Google Scholar
• Polycarpou, P., & Komodromos, P. (2010). Earthquake-induced poundings of a seismically isolated building with adjacent structures. Engineering Structures, 32, 1937–1951.
   Web of Science ®Google Scholar
• Structural Engineers Association of California. (1999). Recommended lateral force requirements and commentary. In Seismology Committee. Sacramento, CA: Author.
   Google Scholar
• Uniform Building Code. (1997). International conference of building officials. Whittier, CA: Author.
   Google Scholar