Seismic analysis incorporating detailed structure–abutment–foundation interaction for quasi-isolated highway bridges

References

• American Association of State Highway and Transportation Officials. (2011). AASHTO guide specifications for LRFD seismic bridge design (2nd ed.). Washington, DC: Author.
   Google Scholar
• Abdel-Mohti, A., & Pekcan, G. (2008). Seismic response of skewed RC box-girder bridges. Earthquake Engineering and Engineering Vibration, 7, 415–426.
   Web of Science ®Google Scholar
• Abo-Shadi, N., Saiidi, M., & Sanders, D. (2000). Seismic response of reinforced concrete bridge pier walls in the weak direction (Report MCEER-00-0006). Reno, NV: University of Nevada, Reno.
   Google Scholar
• American Concrete Institute (2008). Building code requirements for structural concrete (ACI 318–08) and commmentary. Farmington Hills, MI: Author.
   Google Scholar
• American Society of Civil Engineers (2013). Minimum design loads for buildings and other structures (ASCE/SEI 7–10). Reston, VA: Author.
   Google Scholar
• Bignell, J. L., LaFave, J. M., & Hawkins, N. M. (2005). Seismic vulnerability assessment of wall pier supported highway bridges using nonlinear pushover analyses. Engineering Structures, 27, 2044–2063.
   Web of Science ®Google Scholar
• Bignell, J. L., & LaFave, J. M. (2010). Analytical fragility analysis of southern Illinois wall pier supported highway bridges. Earthquake Engineering and Structural Dynamics, 39, 709–729.
   Web of Science ®Google Scholar
• Bozorgzadeh, A., Ashford, S. A., Restrepo, J. I., & Nimityongskul, N. (2008). Experimental and analytical investigation on stiffness and ultimate capacity of bridge abutments (Report SSRP-07/12). La Jolla, CA: University of California, San Diego.
   Google Scholar
• Buckle, I. G. (1994). The Northridge, California earthquake of January 17, 1994: performance of highway bridges. (Report NCEER-94-0008). Buffalo, NY: National Center for Earthquake Engineering, State University of New York at Buffalo.
   Google Scholar
• Buckle, I., Constantinou, M., Dicleli, M., & Ghasemi, H. (2006). Seismic isolation of highway bridges (Report MCEER-06-SP07). Buffalo, NY: State University of New York at Buffalo.
   Google Scholar
• California Department of Transportation (1992). Bridge memo to designers (5–1). Sacramento, CA: Author.
   Google Scholar
• California Department of Transportation(2014). Caltrans seismic design criteria, version 1.7. Sacramento, CA: Author.
   Google Scholar
• Computers and Structures, Inc., (1998). Integrated finite element analysis and design of structures -- SAP 2000 version 15 reference manual. Berkeley, CA: Author.
   Google Scholar
• Crouse, C. B., Hushmand, B., & Martin, G. R. (1987). Dynamic soil-structure interaction of a single-span bridge. Earthquake Engineering and Structural Dynamics, 15, 711–729.
   Web of Science ®Google Scholar
• Elnashai, A. S., Gencturk, B., Kwon, O., Al-Qadi, I. L., Hashash, Y., Roesler, J. R., Valdivia, A. (2010). The Maule (Chile) earthquake of February 27, 2010: consequence assessment and case studies (Report 10–04) Champaign. IL: MAE Center, University of Illinois at Urbana-Champaign.
   Google Scholar
• Ensoft, Inc. (2014). GROUP version 2014. Austin, TX: Ensoft Inc.
   Google Scholar
• Fan, X., & McCormick, J. P. (2015). Characterisation of the behaviour of steel bridge bearings under cyclic load reversal. Structure and Infrastructure Engineering, 11, 744–760.
   Web of Science ®Google Scholar
• Fernandez, J. A., & Rix, G. J. (2008). Seismic hazard analysis and probabilistic ground motions in the upper Mississippi embayment. Geotechnical Earthquake Engineering and Soil Dynamics IV, 1–10. doi:10.1061/40975(318)8
   Google Scholar
• Filipov, E. T., Fahnestock, L. A., Steelman, J. S., Hajjar, J. F., & LaFave, J. M. (2013). Evaluation of quasi-isolated seismic bridge behavior using nonlinear bearing models. Engineering Structures, 49, 168–181.
   Web of Science ®Google Scholar
• Filipov, E. T., Revell, J. R., Fahnestock, L. A., LaFave, J. M., Hajjar, J. F., Foutch, D. A., & Steelman, J. S. (2013). Seismic performance of highway bridges with fusing bearing components for quasi-isolation. Earthquake Engineering and Structural Dynamics, 42, 1375–1394.
   Web of Science ®Google Scholar
• Gomez, J. E., George, F. M., & Robert, E. M. (2000). Development of an improved numerical model for concrete-to-soil interfaces in soil-structure interaction analyses (Report ITL-99-1). Vicksburg, MS: Engineering Research and Development Center, U.S. Army Corps of Engineers.
   Google Scholar
• Illinois Department of Transportation (2012). Bridge Manual. Springfield, IL: Illinois Department of Transportation.
   Google Scholar
• Jennings, P. C. (2012). Engineering features of the San Fernando earthquake of February 9, 1971 (Report EERL-71-02). Pasadena, CA: California Institute of Technology.
   Google Scholar
• Kawashima, K., Unjoh, S., Hoshikuma, J., & Kosa, K. (2011). Damage of Bridges due to the 2010 Maule, Chile, earthquake. Journal of Earthquake Engineering, 15, 1036–1068.
   Web of Science ®Google Scholar
• Kaviani, P., Zareian, F., & Ertugrul, T. (2012). Seismic behavior of reinforced concrete bridges with skew-angled seat-type abutments. Engineering Structures, 45, 137–150.
   Web of Science ®Google Scholar
• Kwon, O., & Jeong, S. (2014). Seismic displacement demands on skewed bridge decks supported on elastomeric bearings. Journal of Earthquake Engineering, 17, 998–1022.
   Web of Science ®Google Scholar
• LaFave, J., Fahnestock, L., Foutch, D., Steelman, J., Revell, J., Filipov, E., & Hajjar, J. (2013). Experimental investigation of the seismic response of bridge bearings (Report FHWA-ICT-13-002). Springfield, IL: Illinois Center for Transportation.
   Google Scholar
• LaFave, J., Fahnestock, L., Foutch, D., Steelman, J., Revell, J., Filipov, E., & Hajjar, J. (2013). Seismic performance of quasi-isolated highway bridges in Illinois (Report FHWA-ICT-13-015). Springfield, IL: Illinois Center for Transportation.
   Google Scholar
• Lam, I. P., & Martin, G. R. (1986). Seismic design of highway bridge foundations. Vol. II. McLean, VA: Office of Engineering and Highway Operations, Federal Highway Administration. design procedures and guidelines (Report FHWA/RD-86/102)
   Google Scholar
• Lee, G. C., & Loh, C. (2000). The Chi-chi. Taiwan earthquake of September 21, 1999: reconnaissance report (Report MCEER-00-0003). Buffalo, NY: Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo.
   Google Scholar
• Maroney, B. H. (1995). Large-scale abutment tests to determine stiffness and ultimate strength under seismic loading (Doctoral dissertation). Davis: University of California, Davis.
   Google Scholar
• Martin, G. R., Yan, L., & Lam, I. P. (1997). Development and implementation of improved seismic design and retrofit procedures for bridge abutments. Los Angeles: University of Southern California.
   Google Scholar
• McCallen, D. B., & Romstad, K. M. (1994). Dynamic analysis of a skewed short-span, box-girder overpass. Earthquake Spectra, 10, 729–755.
   Google Scholar
• McKenna, F., Mazzoni, S., & Fenves, G. (2006). Open system for earthquake engineering simulation (OpenSees). Berkeley: Pacific Earthquake Engineering Research Center, University of California, Berkeley.
   Google Scholar
• Muthukumar, S. (2003). A contact element approach with hysteresis damping for the analysis and design of pounding in bridges (Doctoral dissertation). Atlanta: Georgia Institute of Technology.
   Google Scholar
• Mwafy, A., Kwon, O., & Elnashai, A. (2010). Seismic assessment of an existing non-seismically designed major bridge-abutment-foundation system. Engineering Structures, 123, 2192–2209.
   Web of Science ®Google Scholar
• Neuenhofer, A., & Filippou, F. C. (1997). Evaluation of nonlinear frame finite-element models. Journal of Structural Engineering (ASCE), 123(7), 958–966.
   Web of Science ®Google Scholar
• Reese, L. C., & Van Impe, W. F. (2010). Singe piles and pile groups under lateral loading (2nd ed.). Boca Ration, FL: CRC Press, Taylor & Francis Group.
   Google Scholar
• Rollins, K. M., Gerber, T. M., Cummings, C. R., & Pruett, J. M. (2010). Dynamic passive pressure on abutments and pile caps (Report UT-10.18). Provo, UT: Brigham Young University.
   Google Scholar
• Rollins, K. M., Gerber, T. M. & Nasr, M. (2010). Numerical analysis of dense narrow backfills for increasing lateral passive resistance (Report UT-10.19). Provo, UT: Brigham Young University.
   Google Scholar
• Sardo, A. G., Sardo, T. E., & Harik, I. E. (2006). Post earquake investigation field manual for the state of Kentucky (Report KTC-06-30/SPR234-01-1F). Lexington: Kentucky Transportation Center, University of Kentucky.
   Google Scholar
• Shamsabadi, A., Ashour, M., & Norris, G. (2005). Bridge abutment nonlinear force-displacement-capacity prediction for seismic design. Journal of Geotechnical and Geoenvironmental Engineering (ASCE), 131, 151–161.
   Web of Science ®Google Scholar
• Siddharthan, R. V. & Elgamal, M. (1998). Simplified approach for nonlinear stiffness characterization of abutment on piles. 6th U.S. National Conference on earthquake engineering, Seattle, WA 1998, May 31--June 4.
   Google Scholar
• Somerville, P., Smith, N., Punyamurthula, S., & Sun, J. (1997). Development of ground motion time histories for Phase 2 of the FEMA/SAC steel project (Report SAC/BD-97/04). La Jolla, CA: University of California, San Diego.
   Google Scholar
• Steelman, J., Fahnestock, L., Filipov, La Fave, Hajjar, J. Foutch, D. (2014). Shear and friction response of nonseismic laminated elastomeric bridge bearings subject to seismic demands. Journal of Bridge Engineering (ASCE), 18, 612–623.
   Web of Science ®Google Scholar
• Steelman, J., Filipov, E., Fahnestock, L., Revell, J., LaFave, J., Hajjar, J., & Foutch, D. (2014). Experimental behavior of steel fixed bearings and implications for seismic bridge response. Journal of Bridge Engineering (ASCE), 19, A4014007. Retrieved from http://ascelibrary.org/doi/abs/10.1061/(ASCE)BE.1943-5592.0000540
   Web of Science ®Google Scholar
• Stewart, J. P., Taciroglu, E., Wallace, J. W., Ahlberg, E. R., Lemnitzer, A., Tehrani, P. K., et al. (2007). Full scale cyclic testing of foundation support systems for highway bridges. Part II: abutment backwalls (Report 59A0247). Los Angeles: University of California, Los Angeles.
   Google Scholar
• Taflanidis, A. A. (2011). Optimal probabilistic design of seismic dampers for the protection of isolated bridges against near-fault seismic excitations. Engineering Structures, 33, 3496–3508.
   Web of Science ®Google Scholar
• Tobias, D., Anderson, R., Hodel, C., Kramer, W., Wahab, R., & Chaput, R. (2008). Overview of earthquake resisting system design and retrofit strategy for bridges in Illinois. Practice Periodical on Structural Design and Construction, 13, 147–158.
   Google Scholar
• Wieser, J., & Maragakis, M. Seismic performance of highway bridges with seat-type abutments subjected to near-fault ground motions. Structural Congress. (2013). Pittsburgh, PA: USA. Retrieved from http://ascelibrary.org/doi/abs/10.1061/9780784412848.073
   Google Scholar
• Wilson, P., & Elgamal, A. (2010). Full-scale bridge abutment passive earth pressure experiment and simulation. Journal of Geotechnical and Geoenvironmental Engineering (ASCE), 136, 1634–1643.
   Web of Science ®Google Scholar
• Vamvatsikos, D., & Cornell, C. A. (2002). Incremental dynamic analysis. Earthquake Engineering and Structural Dynamics, 31, 491–514.
   Web of Science ®Google Scholar
• Vintzeleou, E. N., & Tassios, T. P. (1986). Mathematical models for dowel action under monotonic and cyclic conditions. Magazine of Concrete Research, 38, 13–22.
   Web of Science ®Google Scholar
• Yashinsky, M., & Karshenas, M. J. (2003). Fundamentals of seismic protection for bridges. Oakland, CA: Earthquake Engineering Research Institute.
   Google Scholar