A life-cycle framework for integrating green building and hazard-resistant design: examining the seismic impacts of buildings with green roofs

References

• Almufti, I., & Willford, M. (2013). REDi rating system: Resilience-based earthquake design initiative for the next generation of buildings. London: Arup.
   Google Scholar
• American Society of Civil Engineers. (2010). Minimum design loads for buildings and other structures: ASCE/SEI 7-10. Reston, VA: Author.
   Google Scholar
• Applied Technology Council. (2012a, September). Seismic performance of assessment of buildings. Applied Technology Council and Federal Emergency Management Agency (FEMA P-58) 1&2. Redwood City, CA: Author.
   Google Scholar
• Applied Technology Council. (2012b, December). Seismic performance of assessment of buildings. Applied Technology Council and Federal Emergency Management Agency (FEMA P-58) 4. Redwood City, CA: Author.
   Google Scholar
• ASHRAE. (2014). Advanced energy design guide for small to medium office buildings. Atlanta, GA: Author.
   Google Scholar
• Baker, J. W. (2011). Conditional mean spectrum: Tool for ground-motion selection. Journal of Structural Engineering, 137, 322–331.10.1061/(ASCE)ST.1943-541X.0000215
   Web of Science ®Google Scholar
• Baker, J. W. (2015). Efficient analytical fragility function fitting using dynamic structural analysis. Earthquake Spectra, 31, 579–599.10.1193/021113EQS025M
   Web of Science ®Google Scholar
• Beck, J. L., Porter, K. A., Shaikhutdinov, R., Au, S. K., Moroi, T., Tsukada, Y., & Masuda, M. (2002). Impact of Seismic risk on lifetime property values, Final Report. Richmond, CA: Consortium of Universities for Research in Earthquake Engineering.
   Google Scholar
• Berke, P. R. (1995). Natural-hazard reduction and sustainable development: A global assessment. Journal of Planning Literature, 9, 370–382.10.1177/088541229500900404
   Google Scholar
• Bilec, M. M., Ries, R. J., & Matthews, H. S. (2010). Life-cycle assessment modeling of construction processes for buildings. Journal of Infrastructure Systems, 16, 199–205.10.1061/(ASCE)IS.1943-555X.0000022
   Web of Science ®Google Scholar
• Bokalders, V., & Block, M. (2010). The whole building handbook. London: Earthscan.
   Google Scholar
• BREEAM. (2015). What is BREEAM? Retrieved from www.breeam.org
   Google Scholar
• Bruneau, M., Chang, S. E., Eguchi, R. T., Lee, G. C., O’Rourke, T. D., Reinhorn, A. M., … von Winterfeldt, D. (2003). A framework to quantitatively assess and enhance the seismic resilience of communities. Earthquake Spectra, 19, 733–752.10.1193/1.1623497
   Web of Science ®Google Scholar
• California Energy Commission. (2006). California commercial end-use survey (CEUS). San Diego, CA: Itron.
   Google Scholar
• Carbon Leadership Forum. (2012). North American product category rules for ISO 14025 type III environmental product declarations and/or GHG protocol conformant product “carbon footprint” of concrete. Seattle, WA: University of Washington.
   Google Scholar
• Carmody, M. O., Jasarevic, M., Omenzetter, P., Clifton, G. C., & Fassman, E. A. (2009). Seismic response of green roofs. 2009 New Zealand Society for Earthquake Engineering Conference, Christchurch, NZ.
   Google Scholar
• Ciroth, A., & Srocka, M. (2008). How to obtain a precise and representative estimate for parameters in LCA. A case study for the functional unit. International Journal of LCA, 13, 265–277. doi:10.1065/lca2007.06.345
   Web of Science ®Google Scholar
• Comber, M., Poland, C., & Sinclair, M. (2013). Environmental impact seismic assessment: Application of performance-based earthquake engineering methodologies to optimize environmental performance. Proceedings of Structures Congress, 2012, 910–921. doi:10.1061/9780784412367.081
   Google Scholar
• Ching, F. (2014). Building construction illustrated. Hoboken, NJ: Wiley.
   Google Scholar
• Cook, S. M. (2014). Sustainable wastewater management: Modeling and decision strategies for unused medications and wastewater solids ( PhD thesis). University of Michigan, Ann Arbor, MI, USA.
   Google Scholar
• Court, A., Simonen, K., Webster, M., Trusty, W., & Morris, P. (2012). Linking next-generation performance-based seismic design criteria to environmental performance (ATC-86 and ATC-58). Structures Congress, 2012, 922–928. doi:10.1061/9780784412367.082
   Google Scholar
• Department of Energy. (2012a). 2011 Buildings energy data book. Silver Spring, MD: D&R International.
   Google Scholar
• Environmental Protection Agency. (2008). Life cycle assessment: Principles and practice. Cincinnati, OH: Scientific Applications International Corporation.
   Google Scholar
• Feese, C., Li, Y., & Bulleit, W. M. (2014). Assessment of seismic damage of buildings and related environmental impacts. Journal of Performance of Constructed Facilities, 29, 04014106 1–10 (2015). doi:10.1061/(ASCE)CF.1943-5509.0000584
   Google Scholar
• General Services Administration. (2011). A report of the United States general services administration the benefits and challenges of green roofs on public and commercial buildings. Washington, DC: Author.
   Google Scholar
• Goedkoop, M., Oele, M., Leijting, J., Ponsioen, T., & Meijer, E. (2013). Introduction to LCA with SimaPro. PréSustainability. Retrieved from http://www.pre-sustainability.com/
   Google Scholar
• Goulet, C., Haselton, C. B., Mitrani-Reiser, J., Beck J. L., Deierlein, G., Porter, K. A., & Stewart, J. P. (2007). Evaluation of the seismic performance of a code- conforming reinforced-concrete frame building – From seismic hazard to collapse safety and economic losses. Earthquake Engineering & Structural Dynamics, 36, 1973–1997.
   Web of Science ®Google Scholar
• Gromala, D. S., Kapur, O., Kochkin, V., Line, P., Passman, S., Reeder, A., & Trusty, W. (2010). Natural hazards and sustainability for residential buildings. FEMA P-798. Washington, DC: FEMA.
   Google Scholar
• Haselton, C. B., & Deierlein, G. G. (2007). Assessing seismic collapse safety of modern reinforced concrete moment frame buildings ( TR No. 156). Palo Alto, CA: John A. Blume Earthquake Engineering Center, Stanford University.
   Google Scholar
• Haselton, C. B., Liel, A. B., Deierlein, G. G., Dean, B. S., & Chou, J. H. (2011). Seismic collapse safety of reinforced concrete buildings. I: Assessment of ductile moment frames. Journal of Structural Engineering, 137, 481–491.10.1061/(ASCE)ST.1943-541X.0000318
   Web of Science ®Google Scholar
• Haselton, C. B., Mitrani-Reiser, J., Goulet, C., Deierlein, G. G., Beck, J., Porter, K. A., … Taciroglu, E. (2008). An assessment to benchmark the seismic performance of a code-conforming reinforced concrete moment-frame building (Report 2007/12). Berkeley: Pacific Engineering Research Center, University of California.
   Google Scholar
• Hendrickson, C., Horvath, A., Joshi, S., & Lave, L. (1998). Economic input–output models for environmental life-cycle assessment. Environmental Science & Technology, 32, 184–191. doi:10.1021/es983471i
   PubMed Web of Science ®Google Scholar
• Hossain, K. A., & Gencturk, B. (2014). Life-cycle environmental impact assessment of reinforced concrete buildings subjected to natural hazards. Journal of Architectural Engineering. doi:10.1061/(ASCE)AE.1943-5568.0000153, A4014001.
   Google Scholar
• Ibarra, L. F., Medina, R. A., & Krawinkler, H. (2005). Hysteretic models that incorporate strength and stiffness deterioration. Earthquake Engineering Structural Dynamics, 34, 1489–1511.10.1002/(ISSN)1096-9845
   Web of Science ®Google Scholar
• International Code Council. (2009). 2009 International building code. Country Club Hills, IL: Author.
   Google Scholar
• ISO, IEC. (2006). 14044:2006: Environmental management – life cycle assessment – requirements and guidelines. International Organization for Standardization, Geneva, Switzerland.
   Google Scholar
• Jalayer, F., & Cornell, C. A. (2009). Alternative non-linear demand estimation methods for probability-based seismic assessments. Earthquake Engineering & Structural Dynamics, 38, 951–972.
   Web of Science ®Google Scholar
• Junnila, S., & Horvath, A. (2003). Life-cycle environmental effects of an office building. Journal of Infrastructure Systems, 9, 157–166.10.1061/(ASCE)1076-0342(2003)9:4(157)
   Google Scholar
• Lawson, A. M., Bersani, K. S., Fahim-nader, M., & Guo, J. (2002, December). Benchmark input–output accounts of the United States 1997. Survey of Current Business, 19–109.
   Google Scholar
• Lin, T., Harmsen, S. C., Baker, J. W., & Luco, N. (2013). Conditional spectrum computation incorporating multiple causal earthquake and ground-motion prediction models. Bulletin of the Seismological Society of America, 103, 1103–1116.
   Web of Science ®Google Scholar
• Menna, C., Asprone, D., Jalayer, F., Protoa, A., & Manfredi, G. (2012). Assessment of ecological sustainability of a building subjected to potential seismic events during its lifetime. International Journal of Life Cycle Assessment, 18, 504–515. doi:10.1007/s11367-012-0477-9
   Web of Science ®Google Scholar
• Mitrani-Reiser, J., Haselton, C., Goulet, C., Porter, K., Beck, J., & Deierlein, G. (2006). Evaluation of the seismic performance of a code-conforming reinforced-concrete frame building – part II: Loss estimation. Earthquake Engineering & Structural Dynamics, 36, 1973–1997. doi:10.1002/eqe.694
   Web of Science ®Google Scholar
• Moehle,J., & Deierlein, G. G. (2004). A framework methodology for performance-based earthquake engineering. Proceedings of 13th World Conference on Earthquake Engineering, Paper No. 679, Vancouver, BC, Canada.
   Google Scholar
• National Roofing Contractors Association. (2007). The NRCA green roof systems manual. Rosemont, IL: Author.
   Google Scholar
• Padgett, J. E., & Tapia, C. (2013, December). Sustainability of natural hazard risk mitigation: Life cycle analysis of environmental indicators for bridge infrastructure. Journal of Infrastructure Systems, 19, 395–408.10.1061/(ASCE)IS.1943-555X.0000138
   Web of Science ®Google Scholar
• Peck, S., & Kuhn, M. (2003). Design guidelines for green roofs. Ottawa: Ontario Association of Architects.
   Google Scholar
• PEER. (2014). The open system for earthquake engineering simulation. Pacific Earthquake Engineering Research Center, CA. Retrieved from www.opensees.berkeley.org
   Google Scholar
• Porter, K., Kennedy, R., & Bachman, R. (2007). Creating fragility functions for performance-based earthquake engineering. Earthquake Spectra, 23, 471–489.10.1193/1.2720892
   Web of Science ®Google Scholar
• Porter, K., Kiremidjian, A. S., & LeGrue, J. S. (2001). Assembly‐based vulnerability of buildings and its use in performance evaluation. Earthquake Spectra, 17, 291–312.10.1193/1.1586176
   Google Scholar
• Ramirez, C. M., Liel, A. B., Mitrani-Reiser, J., Haselton, C. B., Spear, A. D., Striner, J., … Miranda, E. (2012). Expected earthquake damage and repair costs in reinforced concrete frame buildings. Earthquake Engineering & Structural Dynamics, 41, 1455–1475.
   Web of Science ®Google Scholar
• Sailor, D. J. (2008). A green roof model for building energy simulation programs. Energy and Buildings, 40, 1466–1478.10.1016/j.enbuild.2008.02.001
   Web of Science ®Google Scholar
• Saiz, S., Kennedy, C., Bass, B., & Pressnail, K. (2006). Comparative life cycle assessment of standard and green roofs. Environmental Science & Technology, 40, 4312–4316.
   PubMed Web of Science ®Google Scholar
• Schwab, A. K., & Brower, D. J. (1999). Sustainable development and natural hazards mitigation. Raleigh: North Carolina Division of Emergency Management, USA.
   Google Scholar
• Sharrard, A. L., Matthews, H. S., & Ries, R. J. (2008). Estimating construction project environmental effects using an input–output-based hybrid life-cycle assessment model. Journal of Infrastructure Systems, 14, 327–336.10.1061/(ASCE)1076-0342(2008)14:4(327)
   Web of Science ®Google Scholar
• Shook, D. Personal correspondence, 2013.
   Google Scholar
• Thormark, C. (2007). Energy and resources, material choice and recycling potential in low energy buildings. Paper presented at the International CIB Conference SB07 Sustainable Construction, Materials and Practices. Lisbon, Portugal.
   Google Scholar
• United States Green Building Council. (2009). Green building and LEED core concepts. Washington, DC: Author.
   Google Scholar
• United States Green Building Council. (2015). LEED credit library. LEED BD+C: v4 – LEEDv4. Washington, DC: Author. Retrieved from www.usgbc.org/credits
   Google Scholar
• U.S. Energy Information Administration. (2012). Annual energy outlook 2012. Washington, DC: Department of Energy.
   Google Scholar
• Vieira, P. S., & Horvath, A. (2008). Assessing the end-of-life impacts of buildings. Environmental Science and Technology, 42, 4663–4669.10.1021/es071345l
   PubMed Web of Science ®Google Scholar
• Weidema, B. P., Bauer, C., Hischier, R., Mutel, C., Nemecek, T., Reinhard, J., … Wernet, G. (2013). Overview and methodology: Data quality guideline for the ecoinvent database version 3. Ecoinvent Report 1(3). St. Gallen: The Ecoinvent Centre.
   Google Scholar
• Weiler, S. K., & Scholz-Barth, K. (2009). Green roof systems. Hoboken, NJ: Wiley.
   Google Scholar
• Welsh-Huggins, S. J., & Liel, A. B. (2014a). Integrating green and resilient building design for enhanced disaster recovery. Proceedings of the 3rd International Conference on Urban Disaster Reduction, Earthquake Engineering Research Institute, Boulder, CO, USA.
   Google Scholar
• Welsh-Huggins, S. J., & Liel, A. B. (2014b). Integrating hazard-induced damage and environmental impacts in building life-cycle assessments. Proceedings of the 2014 International Symposium of Life-Cycle Civil Engineering, Tokyo, Japan.
   Google Scholar
• Werner, W., & Burns, J. (2012). Quantification and optimization of structural embodied energy and carbon. Structures Congress, 2012, 929–940. doi:10.1061/9780784412367.083
   Google Scholar