Seismic life-cycle cost analysis of ageing highway bridges under chloride exposure conditions: modelling and recommendations

References

• Akiyama, M., & Frangopol, D.M. (2012, October 3–6). Estimation of steel weight loss due to corrosion in RC members based on digital image processing of X-ray photogram. Life-Cycle and Sustainability of Civil Infrastructure Systems: Proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE’12)(p. 389). Vienna: CRC Press.
   Google Scholar
• Akiyama, M., Frangopol, D.M., & Matsuzaki, H. (2011). Life-cycle reliability of RC bridge piers under seismic and airborne chloride hazards. Earthquake Engineering and Structural Dynamics, 40(15), 1671–1687.10.1002/eqe.v40.15
   Web of Science ®Google Scholar
• Alipour, A., Shafei, B., & Shinozuka, M. (2011). Performance evaluation of deteriorating highway bridges located in high seismic areas. Journal of Bridge Engineering, 16(5), 597–611.10.1061/(ASCE)BE.1943-5592.0000197
   Web of Science ®Google Scholar
• Almusallam, A.A. (2001). Effect of degree of corrosion on the properties of reinforcing steel bars. Construction and Building Materials, 15(8), 361–368.10.1016/S0950-0618(01)00009-5
   Web of Science ®Google Scholar
• Andrade, C., Alonso, C., Garcia, D., and Rodriguez, J. (1991, September 23–26). Remaining lifetime of reinforced concrete structures: Effect of corrosion on the mechanical properties of the steel. In Proceedings of the International Conference on Life Prediction of Corrodible Structures, Cambridge, UK.
   Google Scholar
• Aquino, W., & Hawkins, N.M.N. (2007). Seismic retrofitting of corroded reinforced concrete columns using carbon composites. ACI Structural Journal, 104(3), 348–356.
   Web of Science ®Google Scholar
• Basoz, N., & Mander, J.B. (1999). Enhancement of the highway transportation module in HAZUS. National Institute of Building Sciences., 16(1), 31–40.
   Google Scholar
• Bastidas-Arteaga, E., Sánchez-Silva, M., Chateauneuf, A., & Silva, M. (2008). Coupled reliability model of biodeterioration, chloride ingress and cracking for reinforced concrete structures. Structural Safety, 30(2), 110–129.10.1016/j.strusafe.2006.09.001
   Web of Science ®Google Scholar
• Bertolini, L., & Redaelli, E. (2009). Depassivation of steel reinforcement in case of pitting corrosion: Detection techniques for laboratory studies. Materials and Corrosion, 60(8), 608–616.10.1002/maco.v60:8
   Web of Science ®Google Scholar
• Bertolini, L., Elsener, B., Pedeferri, P., & Polder, R.B. (2004). Corrosion of steel in concrete: Prevention, diagnosis, repair. John Wiley and Sons.
   Google Scholar
• Biondini, F., Bontempi, F., Frangopol, D.M., & Malerba, P.G. (2004). Cellular automata approach to durability analysis of concrete structures in aggressive environments. Journal of Structural Engineering, 130(11), 1724–1737.10.1061/(ASCE)0733-9445(2004)130:11(1724)
   Web of Science ®Google Scholar
• Biondini, F., Camnasio, E., & Palermo, A. (2014). Lifetime seismic performance of concrete bridges exposed to corrosion. Structure and Infrastructure Engineering, 10(7), 880–900.10.1080/15732479.2012.761248
   Web of Science ®Google Scholar
• Broomfield, J.P. (2006). Corrosion of steel in concrete: Understanding, investigation and repair (2nd ed.). Oxon: CRC Press.
   Google Scholar
• Burnham, K.P., & Anderson, D.R. (2003). Model selection and multimodel inference. New York, NY: Springer.
   Google Scholar
• Caltrans (1990). California department of transportation. Sacramento, CA: Author.
   Google Scholar
• Cho, H.N., Choi, H.H., Lee, K.M., & Park, K.H. (2007). Optimal seismic retrofit and maintenance strategy for steel bridges using Life-Cycle Cost analysis. In H.N. Cho, H.H. Choi, K.M. Lee, & K.H. Park (Eds.), Life-cycle cost and performance of civil infrastructure systems (pp. 121–130). London, UK: Taylor & Francis.
   Google Scholar
• Choe, D.E., Gardoni, P., Rosowsky, D., & Haukaas, T. (2008). Probabilistic capacity models and seismic fragility estimates for RC columns subject to corrosion. Reliability Engineering and System Safety, 93(3), 383–393.10.1016/j.ress.2006.12.015
   Web of Science ®Google Scholar
• Choe, D.E., Gardoni, P., Rosowsky, D., & Haukaas, T. (2009). Seismic fragility estimates for reinforced concrete bridges subject to corrosion. Structural Safety, 31(4), 275–283.10.1016/j.strusafe.2008.10.001
   Web of Science ®Google Scholar
• Choe, D.E., Gardoni, P., & Rosowsky, D. (2010). Fragility increment functions for deteriorating reinforced concrete bridge columns. Journal of Engineering Mechanics, 136(8), 969–978.10.1061/(ASCE)EM.1943-7889.0000147
   Web of Science ®Google Scholar
• Choi, E. (2002). Seismic analysis and retrofit of Mid-America bridges ( Ph.D. dissertation). Atlanta, GA: Georgia Institute of Technology.
   Google Scholar
• Chung, L., Paik, I.K., Cho, S.H., & Roh, Y.S. (2006). Infrared thermographic technique to measure corrosion in reinforcing bar. Key Engineering Materials, 321, 821–824.10.4028/www.scientific.net/KEM.321-323
   Google Scholar
• Coronelli, D., & Gambarova, P. (2004). Structural assessment of corroded reinforced concrete beams: Modeling guidelines. Journal of Structural Engineering, 130(8), 1214–1224.10.1061/(ASCE)0733-9445(2004)130:8(1214)
   Web of Science ®Google Scholar
• Costa, A., & Appleton, J. (2002). Case studies of concrete deterioration in a marine environment in Portugal. Cement and Concrete Composites, 24(1), 169–179.10.1016/S0958-9465(01)00037-3
   Web of Science ®Google Scholar
• Decò, A., & Frangopol, D.M. (2013). Life-cycle risk assessment of spatially distributed aging bridges under seismic and traffic hazards. Earthquake Spectra, 29(1), 127–153.10.1193/1.4000094
   Web of Science ®Google Scholar
• Dong, Y., Frangopol, D.M., & Saydam, D. (2013). Time-variant sustainability assessment of seismically vulnerable bridges subjected to multiple hazards. Earthquake Engineering and Structural Dynamics, 42(10), 1451–1467.10.1002/eqe.v42.10
   Web of Science ®Google Scholar
• Du, Y.G., Clark, L.A., & Chan, A.H.C. (2005a). Residual capacity of corroded reinforcing bars. Magazine of Concrete Research, 57(3), 135–147.10.1680/macr.2005.57.3.135
   Web of Science ®Google Scholar
• Du, Y.G., Clark, L.A., & Chan, A.H.C. (2005b). Effect of corrosion on ductility of reinforcing bars. Magazine of Concrete Research, 57(7), 407–419.10.1680/macr.2005.57.7.407
   Web of Science ®Google Scholar
• Duracrete. (2000). General guidelines for durability design and redesign. Report Number BE95-1347/R17 Prepared for DuraCrete: Probabilistic Performance-Based Durability Design of Concrete Structures, The European Union – Brite EuRam III.
   Google Scholar
• Ellingwood, B.R., & Wen, Y.K. (2005). Risk-benefit-based design decisions for low-probability/high consequence earthquake events in Mid-America. Progress in Structural Engineering and Materials, 7(2), 56–70.10.1002/(ISSN)1528-2716
   Google Scholar
• Enright, M.P., & Frangopol, D.M. (1998). Probabilistic analysis of resistance degradation of reinforced concrete bridge beams under corrosion. Engineering Structures, 20(11), 960–971.10.1016/S0141-0296(97)00190-9
   Web of Science ®Google Scholar
• Fang, C., Lundgren, K., Chen, L., & Zhu, C. (2004). Corrosion influence on bond in reinforced concrete. Cement and Concrete Research, 34(11), 2159–2167.10.1016/j.cemconres.2004.04.006
   Web of Science ®Google Scholar
• Faroz, S.A., Pujari, N.N., & Ghosh, S. (2016). Reliability of a corroded RC beam based on Bayesian updating of the corrosion model. Engineering Structures, 126, 457–468.10.1016/j.engstruct.2016.08.003
   Web of Science ®Google Scholar
• Faroz, S.A., Pujari, N.N., Ghosh, S., Ghosh, J., & Shekhar, S. (2017). Time-varying seismic fragility assessment of a corroding RC bridge pier considering non-uniform corrosion. 16th World Conference on Earthquake Engineering, Santiago, Chile.
   Google Scholar
• FEMA. (2003). HAZUS. Earthquake Model, Technical Manual. Washington, DC: Federal Emergency Management Agency.
   Google Scholar
• FHWA. (1995). Seismic retrofitting manual for highway structures: Part 1-Bridges. McLean, VA: Author.
   Google Scholar
• Frangopol, D.M., Lin, K.Y., & Estes, A.C. (1997). Reliability of reinforced concrete girders under corrosion attack. Journal of Structural Engineering, 123(3), 286–297.10.1061/(ASCE)0733-9445(1997)123:3(286)
   Web of Science ®Google Scholar
• Furuta, H., Dogaki, M., Koyama, K., Kataoka, H., & Sugimoto, H. (2004). Life-cycle cost for bridge structures considering earthquake effects. Journal of the Society of Materials Science, Japan, 53(3), 339–344.10.2472/jsms.53.339
   Google Scholar
• Furuta, H., Frangopol, D.M., & Nakatsu, K. (2010). Life-cycle cost of civil infrastructure with emphasis on balancing structural performance and seismic risk of road network. Structure and Infrastructure Engineering, 7(1–2), 65–74.
   Web of Science ®Google Scholar
• Ghisbain, P. (2014). Damage-based earthquake engineering. Southampton, Boston: WIT Press.
   Google Scholar
• Ghosh, J., & Padgett, J.E. (2010). Aging considerations in the development of time-dependent seismic fragility curves. Journal of Structural Engineering, 136(12), 1497–1511.10.1061/(ASCE)ST.1943-541X.0000260
   Web of Science ®Google Scholar
• Ghosh, J., & Padgett, J.E. (2011). Probabilistic seismic loss assessment of aging bridges using a component-level cost estimation approach. Earthquake Engineering and Structural Dynamics, 40(15), 1743–1761.10.1002/eqe.v40.15
   Web of Science ®Google Scholar
• Ghosh, J., & Padgett, J.E. (2012). Impact of multiple component deterioration and exposure conditions on seismic vulnerability of concrete bridges. Earthquakes and Structures, 3(5), 649–673.10.12989/eas.2012.3.5.649
   Web of Science ®Google Scholar
• Ghosh, J., & Sood, P. (2016). Consideration of time-evolving capacity distributions and improved degradation models for seismic fragility assessment of aging highway bridges. Reliability Engineering and System Safety, 154, 197–218.10.1016/j.ress.2016.06.001
   Web of Science ®Google Scholar
• Ghosh, J., Padgett, J.E., & Dueñas-Osorio, L. (2013). Surrogate modeling and failure surface visualization for efficient seismic vulnerability assessment of highway bridges. Probabilistic Engineering Mechanics, 34, 189–199.10.1016/j.probengmech.2013.09.003
   Web of Science ®Google Scholar
• Gonzalez, J., Andrade, C., Alonso, C., & Feliu, S. (1995). Comparison of rates of general corrosion and maximum pitting penetration on concrete embedded steel reinforcement. Cement and Concrete, 25(2), 257–264.10.1016/0008-8846(95)00006-2
   Google Scholar
• Hajializadeh, D., Stewart, M.G., Enright, B., & OBrien, E. (2016). Spatial time-dependent reliability analysis of reinforced concrete slab bridges subject to realistic traffic loading. Structure and Infrastructure Engineering, 12(9), 1137–1152.10.1080/15732479.2015.1086385
   Web of Science ®Google Scholar
• Hanjari, K.Z., Kettil, P., & Lundgren, K. (2011). Analysis of mechanical behavior of corroded reinforced concrete structures. ACI Structural Journal, 108(5), 532.
   Web of Science ®Google Scholar
• Hosmer, D.W. Jr., Lemeshow, S., & Sturdivant, R.X. (2013). Applied logistic regression. (Vol. 398). Hoboken, NJ: Wiley.10.1002/9781118548387
   Google Scholar
• Itoh, Y., & Gu, H. (2009). Prediction of aging characteristics in natural rubber bearings used in bridges. Journal of Bridge Engineering, 14(2), 122–128.10.1061/(ASCE)1084-0702(2009)14:2(122)
   Web of Science ®Google Scholar
• Kadry, S., & Hami, A.El. (2014). Numerical methods for reliability and safety assessment: Multiscale and multiphysics systems. New York, NY: Springer.
   Google Scholar
• Kashani, M.M., Crewe, A.J., & Alexander, N.A. (2013). Nonlinear stress–strain behaviour of corrosion-damaged reinforcing bars including inelastic buckling. Engineering Structures, 48, 417–429.10.1016/j.engstruct.2012.09.034
   Web of Science ®Google Scholar
• Kashani, M.M., Lowes, L.N., Crewe, A.J., & Alexander, N.A. (2015). Phenomenological hysteretic model for corroded reinforcing bars including inelastic buckling and low-cycle fatigue degradation. Computers and Structures, 156, 58–71.10.1016/j.compstruc.2015.04.005
   Google Scholar
• Kashani, M.M., Lowes, L.N., Crewe, A.J., & Alexander, N.A. (2016). Computational modelling strategies for nonlinear response prediction of corroded circular RC bridge piers. Advances in Materials Science and Engineering, Article ID 2738265.
   Google Scholar
• Kobayashi, K., & Banthia, N. (2011). Corrosion detection in reinforced concrete using induction heating and infrared thermography. Journal of Civil Structural Health Monitoring, 1(1–2), 25–35.10.1007/s13349-010-0002-4
   Google Scholar
• Koutsourelakis, P.S. (2010). Assessing structural vulnerability against earthquakes using multi-dimensional fragility surfaces: A Bayesian framework. Probabilistic Engineering Mechanics, 25(1), 49–60.10.1016/j.probengmech.2009.05.005
   Web of Science ®Google Scholar
• Kumar, R., & Gardoni, P. (2014). Renewal theory-based life-cycle analysis of deteriorating engineering systems. Structural Safety, 50, 94–102.10.1016/j.strusafe.2014.03.012
   Web of Science ®Google Scholar
• Kumar, R., Gardoni, P., & Sanchez-Silva, M. (2009). Effect of cumulative seismic damage and corrosion on the life-cycle cost of reinforced concrete bridges. Earthquake Engineering and Structural Dynamics, 38(7), 887–905.10.1002/eqe.v38:7
   Web of Science ®Google Scholar
• Lee, K.M., Cho, H.N., Lim, J.K., & Park, K.H. (2003). Life-cycle cost effective optimal seismic design for continuous PSC bridges. Life-Cycle Performance of Deteriorating Structures: Assessment, Design and Management (pp. 247–262).10.1061/9780784407073
   Google Scholar
• Lim, S., Akiyama, M., & Frangopol, D.M. (2016). Assessment of the structural performance of corrosion-affected RC members based on experimental study and probabilistic modeling. Engineering Structures, 127, 189–205.10.1016/j.engstruct.2016.08.040
   Web of Science ®Google Scholar
• Lim, S., Akiyama, M., Frangopol, D.M., & Jiang, H. (2017). Experimental investigation of the spatial variability of the steel weight loss and corrosion cracking of reinforced concrete members: Novel X-ray and digital image processing techniques. Structure and Infrastructure Engineering, 13(1), 118–134.10.1080/15732479.2016.1198397
   Web of Science ®Google Scholar
• Liu, C. (2005, December 5–8). Evolutionary multiobjective optimization in engineering management: An empirical study on bridge deck rehabilitation. 6th International Conference on Parallel and Distributed Computing, Applications and Technologies, PDCAT 2005 (pp. 773–777), Institute of Electrical and Electronics Engineers Computer Society, Dalian, China.
   Google Scholar
• Mahoney, W. (2009). BNi Public Works 2010 Costbook. BNi (Building News).
   Google Scholar
• Mander, J.B., Priestley, M.J., & Park, R. (1988). Theoretical stress‐strain model for confined concrete. Journal of Structural Engineering, 114(8), 1804–1826.10.1061/(ASCE)0733-9445(1988)114:8(1804)
   Web of Science ®Google Scholar
• Martin, J.L. (2013). Hydro-environmental analysis: Freshwater environments. Boca Raton, FL: CRC Press.10.1201/b16108
   Google Scholar
• McKenna, F., Fenves, G., & Scott, M. (2000). Open system for earthquake engineering simulation. Berkeley: University of California.
   Google Scholar
• Meda, A., Mostosi, S., Rinaldi, Z., & Riva, P. (2014). Experimental evaluation of the corrosion influence on the cyclic behaviour of RC columns. Engineering Structures, 76, 112–123.10.1016/j.engstruct.2014.06.043
   Web of Science ®Google Scholar
• Melchers, R.E. (2014). Microbiological and abiotic processes in modelling longer-term marine corrosion of steel. Bioelectrochemistry, 97, 89–96.10.1016/j.bioelechem.2013.07.002
   PubMed Web of Science ®Google Scholar
• Michel, A., Pease, B., Geiker, M., & Stang, H. (2011). Monitoring reinforcement corrosion and corrosion-induced cracking using non-destructive X-ray attenuation measurements. Cement and Concrete Research, 41(11), 1085–1094.10.1016/j.cemconres.2011.06.006
   Web of Science ®Google Scholar
• Molina, F., Alonso, C., & Andrade, C. (1993). Cover cracking as a function of rebar corrosion: Part 2-Numerical model. Materials and Structures, 26(9), 532–548.10.1007/BF02472864
   Google Scholar
• Moser, R.D., Hoeke, L., Lisa, J., Singh, P.M., Kahn, L.F., & Kurtis, K.E. (2009). Corrosion of steel girder bridge anchor bolts. Transportation Research Board 88th Annual Meeting, 250(404), 1–15.
   Google Scholar
• Muthukumar, S., & DesRoches, R. (2006). A Hertz contact model with non-linear damping for pounding simulation. Earthquake Engineering and Structural Dynamics, 35(7), 811–828.10.1002/(ISSN)1096-9845
   Web of Science ®Google Scholar
• Ni Choine, M. (2014). Seismic reliability assessment of aging integral bridges ( Ph.D. dissertation). Dublin: Trinity College.
   Google Scholar
• Ni Choine, M., O’Connor, A., & Padgett, J.E. (2013). A seismic reliability assessment of reinforced concrete integral bridges subject to corrosion. Key Engineering Materials, 569, 366–373.10.4028/www.scientific.net/KEM.569-570
   Google Scholar
• Nielson, B.G. (2005). Analytical fragility curves for highway bridges in moderate seismic zones ( Ph.D. dissertation). Atlanta, GA: Georgia Institute of Technology.
   Google Scholar
• Nielson, B.G., & DesRoches, R. (2007). Analytical seismic fragility curves for typical bridges in the central and southeastern United States. Earthquake Spectra, 23(3), 615–633.10.1193/1.2756815
   Web of Science ®Google Scholar
• Ou, Y.C., Tsai, L.L., & Chen, H.H. (2012). Cyclic performance of large-scale corroded reinforced concrete beams. Earthquake Engineering and Structural Dynamics, 41(4), 593–604.10.1002/eqe.v41.4
   Web of Science ®Google Scholar
• Padgett, J.E., & DesRoches, R. (2007). Bridge functionality relationships for improved seismic risk assessment of transportation networks. Earthquake Spectra, 23(1), 115–130.10.1193/1.2431209
   Web of Science ®Google Scholar
• Padgett, J.E., Dennemann, K., & Ghosh, J. (2010). Risk-based seismic life-cycle cost-benefit (LCC-B) analysis for bridge retrofit assessment. Structural Safety, 32(3), 165–173.10.1016/j.strusafe.2009.10.003
   Web of Science ®Google Scholar
• Papakonstantinou, K.G., & Shinozuka, M. (2013). Probabilistic model for steel corrosion in reinforced concrete structures of large dimensions considering crack effects. Engineering Structures, 57, 306–326.10.1016/j.engstruct.2013.06.038
   Web of Science ®Google Scholar
• Priestley, M.N., Seible, F., & Calvi, G.M. (1996). Seismic design and retrofit of bridges. New York, NY: Wiley.10.1002/9780470172858
   Google Scholar
• Ramanathan, K.N. (2012). Next generation seismic fragility curves for California bridges incorporating the evolution in seismic design philosophy ( Ph.D. dissertation). Atlanta, GA: Georgia Institute of Technology.
   Google Scholar
• Rao, A.S. (2014). Structural deterioration and time-dependent seismic risk analysis ( Ph.D. dissertation). Stanford, CA: Stanford University.
   Google Scholar
• Rao, A.S., Lepech, M.D., Kiremidjian, A.S., & Sun, X.-Y. (2017). Simplified structural deterioration model for reinforced concrete bridge piers under cyclic loading. Structure and Infrastructure Engineering, 13(1), 55–66.10.1080/15732479.2016.1198402
   Web of Science ®Google Scholar
• Ribeiro, R.B., Silva, J.W.J., Hein, L.R.O., Pereira, M.C., Codaro, E.N., & Matias, N.T. (2013). Morphology characterisation of pitting corrosion on sensitized austenitic stainless steel by digital image analysis. ISRN Corrosion, 2013, Article ID 905942, 7 pages.
   Google Scholar
• Rix, G., & Fernandez, J. (2004). Earthquake ground motion simulation [online]. Retrieved October 19, 2009, from www.ce.gatech.edu/research/mae_ground_motion/
   Google Scholar
• Roberge, P.R. (2008). Corrosion engineering: Principles and practice. New York, NY: McGraw-Hill.
   Google Scholar
• Samarakoon, S.S.M., & Sælensminde, J. (2015). Condition assessment of reinforced concrete structures subject to chloride ingress: A case study of updating the model prediction considering inspection data. Cement and Concrete Composites, 60, 92–98.10.1016/j.cemconcomp.2015.03.011
   Web of Science ®Google Scholar
• SCDOT. (2010). South Carolina department of transportation. Retrieved April 28, 2010, from http://www.dot.state.sc.us/
   Google Scholar
• Sebastiani, P.E. (2016). Performance-based seismic assessment for life-cycle cost analysis of existing bridges retrofitted with seismic isolation ( Ph.D. dissertation). Rome: Sapienza University of Rome.
   Google Scholar
• Shafei, B., & Alipour, A. (2015a). Application of large-scale non-Gaussian stochastic fields for the study of corrosion-induced structural deterioration. Engineering Structures, 88, 262–276.10.1016/j.engstruct.2014.12.024
   Web of Science ®Google Scholar
• Shafei, B., & Alipour, A. (2015b). Estimation of corrosion initiation time in reinforced concrete bridge columns: How to incorporate spatial and temporal uncertainties. Journal of Engineering Mechanics, 141(10), 04015037.10.1061/(ASCE)EM.1943-7889.0000861
   Web of Science ®Google Scholar
• Silano, L.G., & Brinckerhoff, P. (1993). Bridge inspection and rehabilitation. New York, NY: Wiley.
   Google Scholar
• Simon, J., Bracci, J.M., & Gardoni, P. (2010). Seismic response and fragility of deteriorated reinforced concrete bridges. Journal of Structural Engineering, 136(10), 1273–1281.10.1061/(ASCE)ST.1943-541X.0000220
   Web of Science ®Google Scholar
• Stewart, M.G. (2004). Spatial variability of pitting corrosion and its influence on structural fragility and reliability of RC beams in flexure. Structural Safety, 26(4), 453–470.10.1016/j.strusafe.2004.03.002
   Web of Science ®Google Scholar
• Stewart, M.G. (2010). Reliability safety assessment of corroding reinforced concrete structures based on visual inspection information. ACI Structural Journal, 107(6), 671.
   Web of Science ®Google Scholar
• Stewart, M.G., & Al-Harthy, A. (2008). Pitting corrosion and structural reliability of corroding RC structures: Experimental data and probabilistic analysis. Reliability Engineering and System Safety, 93(3), 373–382.10.1016/j.ress.2006.12.013
   Web of Science ®Google Scholar
• Stewart, M.G., & Rosowsky, D.V. (1998). Time-dependent reliability of deteriorating reinforced concrete bridge decks. Structural Safety, 20(1), 91–109.10.1016/S0167-4730(97)00021-0
   Web of Science ®Google Scholar
• Strauss, A., Wendner, R., Bergmeister, K., & Costa, C. (2012). Numerically and experimentally based reliability assessment of a concrete bridge subjected to chloride-induced deterioration. Journal of Infrastructure Systems, 19(2), 166–175.
   Web of Science ®Google Scholar
• Tapia, C., Ghosh, J., & Padgett, J.E. (2011). Life cycle performance metrics for aging and seismically vulnerable bridges. ASCE Structures Congress Conference Proceedings, 1937–1948.
   Google Scholar
• Thanapol, Y., Akiyama, M., & Frangopol, D.M. (2016). Updating the seismic reliability of existing rc structures in a marine environment by incorporating the spatial steel corrosion distribution: Application to bridge piers. Journal of Bridge Engineering, 21(7), 04016031.10.1061/(ASCE)BE.1943-5592.0000889
   Web of Science ®Google Scholar
• Thoft-Christensen, P. (2012). Infrastructures and life-cycle cost-benefit analysis. Structure and Infrastructure Engineering, 8(5), 507–516.10.1080/15732479.2010.539070
   Web of Science ®Google Scholar
• Titi, A., & Biondini, F. (2016). On the accuracy of diffusion models for life-cycle assessment of concrete structures. Structure and Infrastructure Engineering, 12(9), 1202–1215.10.1080/15732479.2015.1099110
   Web of Science ®Google Scholar
• TNDOT. (2010). Tennessee department of transportation. Retrieved April 28, 2010, from http://www.tdot.state.tn.us/construction/AverageUnitPrices/aup_2009.pdf
   Google Scholar
• Tuutti, K. (1982). Corrosion of steel in concrete. Stockholm: Swedish Cement and Concrete Research Institute.
   Google Scholar
• USGS. (2015). Hazards: Seismic hazard maps and data. Retrieved November 14, 2011, from http://earthquake.usgs.gov/hazards/
   Google Scholar
• Val, D.V., & Melchers, R.E. (1997). Reliability of deteriorating RC slab bridges. Journal of Structural Engineering, 123(12), 1638–1644.10.1061/(ASCE)0733-9445(1997)123:12(1638)
   Web of Science ®Google Scholar
• Val, D.V., Stewart, M.G., & Melchers, R.E. (2000). Life-cycle performance of RC bridges: Probabilistic approach. Computer-Aided Civil and Infrastructure Engineering, 15(1), 14–25.10.1111/mice.2000.15.issue-1
   Web of Science ®Google Scholar
• Vecchio, F.J., & Collins, M.P. (1986). The modified compression-field theory for reinforced concrete elements subjected to shear. ACI Journal Proceedings, 83(2), 219–231.
   Web of Science ®Google Scholar
• Vu, K.A.T., & Stewart, M.G. (2000). Structural reliability of concrete bridges including improved chloride-induced corrosion models. Structural Safety, 22(4), 313–333.10.1016/S0167-4730(00)00018-7
   Web of Science ®Google Scholar
• Wang, X., & Liu, X. (2004). Modeling bond strength of corroded reinforcement without stirrups. Cement and Concrete Research, 34(8), 1331–1339.10.1016/j.cemconres.2003.12.028
   Web of Science ®Google Scholar
• Wang, K., Nelsen, D.E., & Nixon, W.A. (2006). Damaging effects of deicing chemicals on concrete materials. Cement and Concrete Composites, 28(2), 173–188.10.1016/j.cemconcomp.2005.07.006
   Web of Science ®Google Scholar
• Wen, Y., & Wu, C. (2001). Uniform hazard ground motions for mid‐America cities. Earthquake Spectra, 17(2), 359–384.10.1193/1.1586179
   Google Scholar
• Weyers, R., Fitch, M., Larsen, E., & Al-Qadi, I. (1994). Concrete bridge protection and rehabilitation: Chemical and physical techniques. Service life estimates (p. 357). Washington, DC: National Research Council.
   Google Scholar
• Whiting, D., Stejskal, B., & Nagi, M. (1990). Condition of prestressed concrete bridge components: Technology review and field surveys. Washington, DC: Federal Highway Administration.
   Google Scholar
• Yokozaki, K., Motohashi, K., Okada, K., & Tsutsumi, K. (1997). A rational model to predict the service life of RC structures in marine environment, Forth CANMET. ACI International Conference on Durability of Concrete, 170, 777–799.
   Google Scholar
• Zhang, G., Cao, X., & Fu, Q. (2015). Literature review on experiment study on RC element with corroded rebar. In Proceedings of the 1st International Conference on Sustainable Buildings and Structures (Suzhou, PR China, 29 October-1 November 2015) (p. 57). CRC Press. 10.1201/b19239
   Google Scholar