Uncertainty assessment of concrete electrical resistivity measurements on a coastal bridge

References

• Andrade, C., & Alonso, C. (2004). RILEM TC 154-EMC: Electrochemical techniques for measuring metallic corrosion - Recommendations - Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method. Materials and Structures, 37(9), 623–643.
   Google Scholar
• Azarsa, P., & Gupta, R. (2017). Electrical resistivity of concrete for durability evaluation: A review. Advances in Materials Science and Engineering, 2017, 1–30. doi: 10.1155/2017/8453095
   Web of Science ®Google Scholar
• Balayssac, J.-P., Laurens, S., Arliguie, G., Breysse, D., Garnier, V., Dérobert, X., & Piwakowski, B. (2012). Description of the general outlines of the French project SENSO – Quality assessment and limits of different NDT methods. Construction and Building Materials, 35, 131–138. doi: 10.1016/j.conbuildmat.2012.03.003
   Web of Science ®Google Scholar
• Bastidas-Arteaga, E., & Schoefs, F. (2015). Sustainable maintenance and repair of RC coastal structures. Proceedings of the Institution of Civil Engineers-Maritime Engineering, 168(4), 162–173. doi: 10.1680/jmaen.14.00018
   Web of Science ®Google Scholar
• Bentur, A., Diamond, S., & Berke, N. S. (1997). Steel corrosion in concrete - Fundamentals and civil engineering practice. London: E&FN SPON.
   Google Scholar
• Bertolini, L., Elsener, B., Pedeferri, P., & Polder, R. (2004). Corrosion of steel in concrete: Prevention, diagnosis, repair. Weinheim: Wiley Vch Verlagsgesellschaft Mbh.
   Google Scholar
• Boéro, J., Schoefs, F., Yañez-Godoy, H., & Capra, B. (2012). Time-function reliability of harbour infrastructures from stochastic modelling of corrosion. European Journal of Environmental and Civil Engineering, 16(10), 1187–1201. doi: 10.1080/19648189.2012.688611
   Web of Science ®Google Scholar
• Bourreau, L., Bouteiller, V., Schoefs, F., Gaillet, L., Thauvin, B., Schneider, J., & Naar, S. (2016). On-site corrosion monitoring - reliability. Materials, Systems and Structures in Civil Engineering Conference, Segment on Electrochemistry in Civil Engineering. Technical University of Denmark, Lyngby, Denmark.
   Google Scholar
• Bourreau, L., Gaillet, L., Bouteiller, V., Schoefs, F., Thauvin, B., Schneider, J., & Naar, S. (2018). Better understanding of tide’s influence on half-cell potential measurements for reinforced concrete in marine environment. Proceedings of 40th IABSE Symposium ‘Tomorrow’s Megastructures’, 6 p., September 19–21, 2018, Nantes, France.
   Google Scholar
• Breysse, D., & Abraham, O. (Eds). (2005). Méthodologie d'évaluation non destructive de l'état d'altération des ouvrages en béton (in French). Presses de l'Ecole Nationale des Ponts et Chaussées, Paris, France.
   Google Scholar
• Breysse, D., Yotte, S., Salta, M., Schoefs, F., Ricardo, J., & Chaplain, M. (2009). Accounting for variability and uncertainties in NDT condition assessment of corroded RC-structures. European Journal of Environmental and Civil Engineering, 13(5), 573–591. doi: 10.1080/19648189.2009.9693135
   Web of Science ®Google Scholar
• Broomfield, J. P. (1997). Corrosion of steel in concrete - Understanding, investigation and repair. London: E&FN SPN.
   Google Scholar
• Cigna, R., Andrade, C., Nürnberger, U., Polder, R., Weydert, R., & Seitz, E. (2003). COST 521 - Corrosion of steel in reinforced concrete structures (Final Report: EUR 20599). European Communities, Luxembourg.
   Google Scholar
• COST TU 1404. Towards the next generation of standards for service life of cement-based materials and structures. In D., Schlicke, M., Azenha, & S. Staquet (Eds.), eBook of 1404 action of European Cooperation in Science and Technology 2015–2018, Edited by Techn. Univ. Graz, Austria, 2015. DOI: 10.3217/978-3-85125-434-1.
   Google Scholar
• Cox, R.N., Cigna, R., Vennesland, O., & Valente, T., (Eds). (1997). COST 509 - Corrosion and protection of metals in contact with concrete (Final Report: EUR 17608 EN). European Commission, Directorate General Science, Research and Development, Brussels.
   Google Scholar
• Elsener, B., Andrade, C., Gulikers, J., Polder, R., & Raupach, M. (2003). RILEM TC 154-EMC: Electrochemical techniques for measuring metallic corrosion - Recommendations - Half-cell potential measurements - Potential mapping on reinforced concrete structures. Materials and Structures, 36(7), 461–471. doi: 10.1007/BF02481526
   Google Scholar
• Gowers, K. R., & Millard, S. G. (1999). Measurement of concrete resistivit for assessment of corrosion severity of steel using Wenner technique. ACI Materials Journal, 96(5), 536–541.
   Web of Science ®Google Scholar
• Hornbostel, K., Larsen, C. K., & Geiker, M. R. (2013). Relationship between concrete resistivity and corrosion rate – A literature review. Cement and Concrete Composites, 39, 60–72. doi: 10.1016/j.cemconcomp.2013.03.019
   Web of Science ®Google Scholar
• Montemor, M. F., Simões, A. M. P., & Ferreira, M. G. S. (2003). Chloride-induced corrosion on reinforcing steel: From the fundamentals to the monitoring techniques. Cement and Concrete Composites, 25(4-5), 491–502. doi: 10.1016/S0958-9465(02)00089-6
   Web of Science ®Google Scholar
• Nanukuttan, S. V., Basheer, P. A. M., McCarter, W. J., Tang, L., Holmes, N., Chrisp, T. M., Starrs, G., & Magee, B. (2015). The performance of concrete exposed to marine environments: Predictive modelling and use of laboratory/on site test methods. Construction and Building Materials, 93, 831–840. doi: 10.1016/j.conbuildmat.2015.05.083
   Web of Science ®Google Scholar
• Pasqualini, O., Schoefs, F., Chevreuil, M., & Cazuguel, M. (2013). Measurements and statistical analysis of fillet welded joints geometrical parameters for probabilistic modelling of the fatigue capacity. Marine Structures, 34, 226–248. doi: 10.1016/j.marstruc.2013.10.002
   Web of Science ®Google Scholar
• Polder, R. (2001). Test methods for on site measurement of resistivity of concrete -A RILEM TC-154 technical recommendation. Construction and Building Materials, 15(2-3), 125–131. doi: 10.1016/S0950-0618(00)00061-1
   Web of Science ®Google Scholar
• Polder, R., Andrade, C., Elsener, B., Vennesland, Ø., Gulikers, J., Weidert, R., & Raupach, M. (2000). RILEM TC 154-EMC: Electrochemical techniques for measuring metallic corrosion - Recommendations - Test methods for on-site measurements of resistivity of concrete. Materials and Structures, 33(10), 603–611. doi: 10.1007/BF02480599
   Google Scholar
• Poupard, O., L'Hostis, V., Bouteiller, V., Capra, B., Catinaud, S., Francois, D., Garciaz, J.-L., Laurens, S., Luping, T., Olivier, G., & Tache, G. (2007). Corrosion diagnosis of reinforced concrete beams after 40 years exposure in marine environment by non destructive tools. Revue Européenne de Génie Civil, 11(1-2), 35–54. doi: 10.1080/17747120.2007.9692921
   Google Scholar
• Poupard, O., L'Hostis, V., Catinaud, S., & Petre-Lazar, I. (2006). Corrosion damage diagnosis of a reinforced concrete beam after 40 years natural exposure in marine environment. Cement and Concrete Research, 36(3), 504–520. doi: 10.1016/j.cemconres.2005.11.004
   Web of Science ®Google Scholar
• Raupach, M., Reichling, K., Broomfield, J., Gulikers, J., Schneck, U., Serdar, M., & Pepenar, I. (2013). Inspection strategies for reinforcement corrosion surveys. Matérials and Corrosion, 64(2), 111–115. doi: 10.1002/maco.201206627
   Web of Science ®Google Scholar
• Reichling, K., Raupach, M., Broomfield, J., Gulikers, J., L'Hostis, V., Kessler, S., Osterminski, K., Pepenar, I., Schneck, U., Sergi, G., & Taché, G. (2013). Full surface inspection methods regarding reinforcement corrosion of concrete structures. Materials and Corrosion, 64(2), 116–127.
   Web of Science ®Google Scholar
• Sanchez, J., Andrade, C., Torres, J., Rebolledo, N., & Fullea, J. (2017). Determination of reinforced concrete durability with on‐site resistivity measurements. Materials and Structures, 50(41) p.1(9).
   Google Scholar
• Schoefs, F., Boero, J., Clément, A., & Capra, B. (2012). The alpha delta method for modelling expert judgement and combination of non-destructive testing tools in risk-based inspection context: application to marine structures. Structure and Infrastructure Engineering, 8(6), 531–543. doi: 10.1080/15732479.2010.505374
   Web of Science ®Google Scholar
• Schoefs, F., Clément, A., & Nouy, A. (2009). Assessment of ROC curves for inspection of random fields. Structural Safety, 31(5), 409–419. doi: 10.1016/j.strusafe.2009.01.004
   Web of Science ®Google Scholar
• Sheils, E., O'Connor, A., Schoefs, F., & Breysse, D. (2012). Investigation of the effect of the quality of inspection techniques on the optimal inspection interval for structures. Structure and Infrastructure Engineering, 8(6), 557–568. doi: 10.1080/15732479.2010.505377
   Web of Science ®Google Scholar
• Tilly, G. P., & Jacobs, J. (2007). CONREPNET - Concrete repairs - Performance in service and current practice. Watford: IHS BRE Press.
   Google Scholar
• Wenner, F. (1916). A method of measuring earth resistivity. Bulletin of the Bureau of Standards, 12(4), 469–478. doi: 10.6028/bulletin.282
   Google Scholar
• Weydert, R., & Gehlen, C. (1999). Electrolytic resistivity of cover concrete: Relevance, measurement and interpretation. In M. A. Lacasse, & D. J. Vanier (Ed.), Proceedings of the eight international conference ‘durability of building materials and components’ (pp. 409–419), Ottowa: NRC Research Press.
   Google Scholar
• Woodward, R., Cullington, D. W., Daly, A. F., Vassie, P. R. W., Haardt, P., & Kashner, R. (2001). Bridge management in Europe (BRIME)-Deliverable D14. Final Report. p. 228, ice publishing.
   Google Scholar