Post-buckling of network arch bridges subjected to vertical loads

References

• Aoki, Y. (2014). Analysis of the performance of cable-stayed bridges under extreme events (PhD dissertation). University of Technology of Sydney, Sydney, Australia.
   Google Scholar
• Bradford, M. A., Pi, Y., & Liu, A. (2018). Out-plane elastic-plastic buckling strength of high-strength steel arches. Journal of Structural Engineering, 144(6), 04018053–04018012. doi:10.1061/(ASCE)ST.1943-541X.0002051
   Web of Science ®Google Scholar
• Bruno, D., Greco, F., & Lonetti, P. (2005). Dynamic mode I and mode II crack propagation in fiber reinforced composite. Mechanics of Advanced Materials and Structures, 12(4), 285–304. doi:10.1080/15376490590953563
   Web of Science ®Google Scholar
• Bruno, D., Greco, F., & Lonetti, P. (2009). Computation of energy release rate and mode separation in delaminated composite plates by using plate and interface variable. Mechanics of Advanced Materials and Structures, 16(6), 442–455. doi:10.1080/15376490902781183
   Web of Science ®Google Scholar
• Bruno, D., Lonetti, P., & Pascuzzo, A. (2018). A numerical study on network arch bridges subjected to cable loss. International Journal of Bridge Engineering, 6(2), 41–59.
   Web of Science ®Google Scholar
• De Backer, H., Outtier, A., & Van Bogaert, P. (2014). Buckling design of steel tied-arch bridge. Journal of Constructional Steel Research, 103, 159–167. doi:10.1016/j.jcsr.2014.09.004
   Web of Science ®Google Scholar
• De Zotti, A., Pellegrino, C., & Modena, C. (2007). A parametric study of the hanger arrangement in arch bridges. Proceedings of the 5th International Conference on Arch Bridges, Madeira, Portugal.
   Google Scholar
• EN1993. (2005). Design of steel structures. Part 2: Steel bridges. Brussels, Belgium: European Committee for Standardization.
   Google Scholar
• EN1991. (2002). Actions on structures. Part 1.1: General actions – Densities, self-weight, imposed loads for buildings. Brussels, Belgium: European Committee for Standardization.
   Google Scholar
• Ferraioli, M., Lavino, A., Mandara, A., Donciglio, M., & Formisano, A. (2018). Seismic and robustness design of steel frame building. Key Engineering Materials, 763, 116–123. http://doi.org/10.4028/www.scientific.net/kem.763.116. doi:10.4028/www.scientific.net/KEM.763.116
   Google Scholar
• Formisano, A., Di Lorenzo, G., & Landolfo, R. (2018). Non-linear analyses and fragility curves of European existing single-story steel building. Proceedings of 16th International Conference of Numerical Analysis and Applied Mathematics, Rhodes, Greece.
   Google Scholar
• Formisano, A., Landolfo, R., & Mazzolani, F. M. (2015). Robustness assessment approaches for steel framed structures under catastrophic events. Computers & Structures, 147, 216–228. doi:10.1016/j.compstruc.2014.09.010
   Web of Science ®Google Scholar
• Greco, F., Lonetti, P., & Pascuzzo, A. (2013). Dynamic analysis of cable-stayed bridges affected by accidental failure mechanisms under moving loads. Mathematical Problems in Engineering, 2013, 0, 1–17. doi:10.1155/2013/302706
   Web of Science ®Google Scholar
• Greco, F., Lonetti, P., & Pascuzzo, A. (2018). A moving mesh FE methodology for vehicle–bridge interaction modeling. Mechanics of Advanced Materials and Structures, 1–13. doi:10.1080/15376494.2018.1506955
   Web of Science ®Google Scholar
• La Poutré, D. B., Spoorenberg, R. C., Snijder, H. H., & Hoenderkamp, J. C. D. (2013). Out-of-plane stability of roller bent steel arches—An experimental investigation. Journal of Constructional Steel Research, 81, 20–34. doi:10.1016/j.jcsr.2012.11.004
   Web of Science ®Google Scholar
• Laterza, M., D’Amato, M., & Gigliotti, R. (2017). Modeling of gravity-designed RC sub-assemblages subjected to lateral load. Engineering Structures, 130, 242–260. doi:10.1016/j.engstruct.2016.10.044
   Web of Science ®Google Scholar
• Liu, A. R., Huang, Y. H., Yu, Q. C., & Rao, R. (2014). An analytical solution for lateral buckling critical load calculation of leaning-type arch bridge. Mathematical Problems in Engineering, 2014, 1–14. doi:10.1155/2014/578473
   Web of Science ®Google Scholar
• Lonetti, P., & Pascuzzo, A. (2014). Vulnerability and failure analysis of hybrid cable-stayed suspension bridges subjected to damage mechanisms. Engineering Failure Analysis, 45, 470–495. doi:10.1016/j.engfailanal.2014.07.002
   Web of Science ®Google Scholar
• Lonetti, P., Pascuzzo, A., & Aiello, S. (2018). Instability design analysis in tied-arch bridges Instability design analysis in tied-arch bridges. Mechanics of Advanced Materials and Structures, 26(8), 716–711. doi:10.1080/15376494.2017.1410911
   Web of Science ®Google Scholar
• Lonetti, P., Pascuzzo, A., & Davanzo, A. (2016). Dynamic behavior of tied-arch bridges under the action of moving loads dynamic behavior of tied-arch bridges under the action of moving loads. Mathematical Problems in Engineering, 2016, 1–17. doi:10.1155/2016/2749720
   Web of Science ®Google Scholar
• Mozos, C. M., & Aparicio, A. C. (2010). Parametric study on the dynamic response of cable stayed bridges to the sudden failure of a stay, Part II: Bending moment acting on the pylons and stress on the stays. Engineering Structures, 32(10), 3301–3312. doi:10.1016/j.engstruct.2010.07.002
   Web of Science ®Google Scholar
• Ostrycharczyk, A. W., & Malo, K. A. (2017). Parametric study of radial hanger patterns for network arch timber bridges with a light deck on transverse crossbeams. Engineering Structures, 153, 491–502. doi:10.1016/j.engstruct.2017.10.021
   Web of Science ®Google Scholar
• Ostrycharczyk, A. W., & Malo, K. A. (2018). Parametric study on effects of load position on the stress distribution in network arch timber bridges with light timber decks on transverse crossbeams. Engineering Structures, 163, 112–121. doi:10.1016/j.engstruct.2018.02.046
   Web of Science ®Google Scholar
• Palkowski, S. (2012). Buckling of parabolic arches with hangers and tie. Engineering Structures, 44, 128–132. doi:10.1016/j.engstruct.2012.05.028
   Web of Science ®Google Scholar
• Pellegrino, C., Cupani, G., & Modena, C. (2010). The effect of fatigue on the arrangement of hangers in tied arch bridges. Engineering Structures, 32(4), 1140–1147. doi:10.1016/j.engstruct.2009.12.040
   Web of Science ®Google Scholar
• Pi, Y. L., & Trahair, N. S. (1994). Nonlinear inelastic analysis of steel beam-columns. I: Theory. Journal of Structural Engineering, 120(7), 2041–2061. doi:10.1061/(ASCE)0733-9445(1994)120:7(2041)
   Web of Science ®Google Scholar
• Qiu, W. L., Kao, C. S., Kou, C. H., Tsai, J. L., & Yang, G. (2010). Stability analysis of special-shape arch bridge. Tamkang Journal of Science and Engineering, 13(4), 365–373.
   Google Scholar
• Rademacher, D., Zanon, R., & Ochojski, W. (2019). Netzbogenbrücken mit hd-profilen – ein neuer trend (Report No. 2). Luxembourg: Revue Technique Luxembourgeoise.
   Google Scholar
• Romeijn, A., & Bouras, C. (2008). Investigation of the arch in-plane buckling behaviour in arch bridges. Journal of Constructional Steel Research, 64(12), 1349–1356. doi:10.1016/j.jcsr.2008.01.035
   Web of Science ®Google Scholar
• Sakimoto, T., Yamao, T., & Komatsu, S. (1979). Experimental study on the ultimate strength of steel arche. Proceedings of Japan Society of Civil Engineers, Tokyo, Japan.
   Google Scholar
• Schanack, F. (2009). In-plane arch buckling of network arc. World Steel Bridge Symposium, Valdivia, Chile.
   Google Scholar
• Spoorenberg, R. C., Snijder, H. H., Hoenderkamp, J. C. D., & Beg, D. (2012). Design rules for out-of-plane stability of roller bent steel arches with FEM. Journal of Constructional Steel Research, 79, 9–21. doi:10.1016/j.jcsr.2012.07.027
   Web of Science ®Google Scholar
• Starossek, U., & Wolff, M. (2005). Progressive collapse: Design strategies. International Association for Bridge and Structural Engineering Symposium, Lisbon, Portugal.
   Google Scholar
• Taucer, F. F., Spacone, E., & Filippou, F. C. (1991). A fiber beam-column element for seismic response analysis (Research report no. UCB/EERC-91/17). Berkeley: Earthquake Engineering Research Center College of Engineering, University of California.
   Google Scholar
• Teich, S. (2011). Contribution to optimizing Network arch bridges (PhD dissertation). Technische Universität Dresden, Dresden, Germany.
   Google Scholar
• Tveit, P. (2010). Optimal network arches for road and rail bridges. Proceedings of the 6th International Conference on Arch Bridges, Fuzhou, Fujian, China.
   Google Scholar
• Wolff, M., & Starossek, U. (2010). Cable-loss analyses and collapse behavior of cable-stayed bridges. Proceedings of the 5th International Conference on Bridge Maintenance, Safety and Management, Philadelphia, PA.
   Google Scholar