References
- Abruzzo, J., Matta, A., & Panariello, G. (2006). Study of mitigation strategies for progressive collapse of a reinforced concrete commercial building. Journal of Performance of Constructed Facilities, 20(4), 384–390. doi:https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(384)
- Alashker, Y., Li, H., & El-Tawil, S. (2011). Approximations in progressive collapse modeling. Journal of Structural Engineering, 137(9), 914–924. doi:https://doi.org/10.1061/(asce)st.1943-541x.0000452
- Ameri, M. R., Massumi, A., & Masoomi, H. (2019). Effect of structural redundancy on progressive collapse resistance enhancement in RC frame structures. Journal of Performance of Constructed Facilities, 33(1), 04018092. doi:https://doi.org/10.1061/(asce)cf.1943-5509.0001244
- ASCE 7-05 (2005). Minimum design loads for building and other structures. New York: American Society for Civil Engineers. doi:https://doi.org/10.1061/9780784408094
- Chopra, A. K. (2011). Dynamics of structures. London: Prentice Hall.
- Dat, P. X., & Tan, K. H. (2015). Experimental response of beam-slab substructures subject to penultimate-external column removal. Journal of Structural Engineering, 141(7), 04014170. doi:https://doi.org/10.1061/(asce)st.1943-541x.0001123
- Fallon, C. T., Quiel, S. E., & Naito, C. J. (2016). Uniform pushdown approach for quantifying building-frame robustness and the consequence of disproportionate collapse. Journal of Performance of Constructed Facilities, 30(6), 04016060. doi:https://doi.org/10.1061/(asce)cf.1943-5509.0000912
- Feng, P., Qiang, H., Ou, X., Qin, W., & Yang, J. (2019). Progressive collapse resistance of GFRP-strengthened RC beam–slab subassemblages in a corner column–removal scenario. Journal of Composites for Construction, 23(1), 04018076. doi:https://doi.org/10.1061/(asce)cc.1943-5614.0000917
- Gsa, U. (2003). Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects. Washington, DC: US General Service Administration.
- Hadjioannou, M., Donahue, S., Williamson, E. B., & Engelhardt, M. D. (2018). Large-scale experimental tests of composite steel floor systems subjected to column loss scenarios. Journal of Structural Engineering, 144(2), 04017184. doi:https://doi.org/10.1061/(asce)st.1943-541x.0001929
- Higashibata, Y. (1974). Elastic-postelastic analysis of the cyclic behavior of reinforced column taking account of the effect of bond. Symposium of IABSE, Design and Safety of Reinforced Concrete Compression Member.
- Hou, J., Song, L., & Liu, H. H. (2016a). Progressive collapse of RC frame structures after a centre column loss. Magazine of Concrete Research, 68(8), 423–432. doi:https://doi.org/10.1680/jmacr.15.00160
- Hou, J., Song, L., & Liu, H. H. (2016b). Testing and analysis on progressive collapse-resistance behavior of RC frame substructures under a side column removal scenario. Journal of Performance of Constructed Facilities, 30(5), 04016022. doi:https://doi.org/10.1061/(asce)cf.1943-5509.0000873
- Lim, N. S., Tan, K. H., & Lee, C. K. (2017a). Effects of rotational capacity and horizontal restraint on development of catenary action in 2-D RC frames. Engineering Structures, 153, 613–627. doi:https://doi.org/10.1016/j.engstruct.2017.09.059
- Lim, N. S., Tan, K. H., & Lee, C. K. (2017b). Experimental studies of 3D RC substructures under exterior and corner column removal scenarios. Engineering Structures, 150, 409–427. doi:https://doi.org/10.1016/j.engstruct.2017.07.041
- Lim, N. S., Tan, K. H., & Lee, C. K. (2018). A simplified model for alternate load path assessment in RC structures. Engineering Structures, 171, 696–711. doi:https://doi.org/10.1016/j.engstruct.2018.05.074
- Lin, K., Li, Y., Lu, X., & Guan, H. (2017). Effects of seismic and progressive collapse designs on the vulnerability of RC frame structures. Journal of Performance of Constructed Facilities, 31(1), 04016079. doi:https://doi.org/10.1061/(asce)cf.1943-5509.0000942
- MOHURD. (2006). Load code for the design of building structures GB50009-2012. Beijing: China Architecture and Building Press.
- MOHURD. (2010a). Code for design of concrete structures GB 50010-2010. Beijing: China Architecture and Building Press.
- MOHURD. (2010b). Code for seismic design of buildings GB 50011-2010. Beijing: China Architecture and Building Press.
- Park, R. (1989). Evaluation of ductility of structures and structural assemblages from laboratory testing. Bulletin of the New Zealand Society for Earthquake Engineering, 22(3), 155–166.
- Park, R., & Gamble, W. L. (2000). Reinforced concrete slabs (2nd ed.). New York: Wiley.
- Qian, K., & Li, B. (2013a). Performance of three-dimensional reinforced concrete beam-column substructures under loss of a corner column scenario. Journal of Structural Engineering, 139(4), 584–594. doi:https://doi.org/10.1061/(asce)st.1943-541x.0000630
- Qian, K., & Li, B. (2013b). Strengthening and retrofitting of RC flat slabs to mitigate progressive collapse by externally bonded CFRP laminates. Journal of Composites for Construction, 17(4), 554–565. doi:https://doi.org/10.1061/(asce)cc.1943-5614.0000352
- Qian, K., & Li, B. (2015a). Quantification of slab influences on the dynamic performance of RC frames against progressive collapse. Journal of Performance of Constructed Facilities, 29(1), 04014029. doi:https://doi.org/10.1061/(asce)cf.1943-5509.0000488
- Qian, K., & Li, B. (2015b). Strengthening of multibay reinforced concrete flat slabs to mitigate progressive collapse. Journal of Structural Engineering, 141(6), 04014154. doi:https://doi.org/10.1061/(asce)st.1943-541x.0001125
- Qian, K., & Li, B. (2017). Effects of masonry infill wall on the performance of RC frames to resist progressive collapse. Journal of Structural Engineering, 143(9), 04017118. doi:https://doi.org/10.1061/(asce)st.1943-541x.0001860
- Qian, K., & Li, B. (2019). Strengthening and retrofitting precast concrete buildings to mitigate progressive collapse using externally bonded GFRP strips. Journal of Composites for Construction, 23(3), 04019018. doi:https://doi.org/10.1061/(asce)cc.1943-5614.0000943
- Qian, K., Li, B., & Zhang, Z. (2016). Influence of multicolumn removal on the behaviour of RC floors. Journal of Structural Engineering, 142(5), 04016006. doi:https://doi.org/10.1061/(asce)st.1943-541x.0001461
- Qian, K., Weng, Y.-H., & Li, B. (2019). Improving behavior of reinforced concrete frames to resist progressive collapse through steel bracings. Journal of Structural Engineering, 145(2), 04018248. doi:https://doi.org/10.1061/(asce)st.1943-541x.0002263
- UFC. (2005). Design of building to resist progressive collapse. Washington, DC: Department of Defense.
- Yi, W., He, Q., & Xiao, Y. (2007). Collapse performance of RC frame structure. Journal of Building Structures, 28(5), 104–109.
- Yi, W., He, Q., Xiao, Y., & Kunnath, S. K. (2008). Experimental study on progressive collapse-resistant behavior of reinforced concrete frame structures. ACI Structural Journal, 105(4), 433–439.
- Yu, J., & Tan, K. H. (2013). Structural behavior of RC beam-column subassemblages under a middle column removal scenario. Journal of Structural Engineering, 139(2), 233–250. doi:https://doi.org/10.1061/(asce)st.1943-541x.0000658
- Yu, J., & Tan, K. H. (2014). Special detailing techniques to improve structural resistance against progressive collapse. Journal of Structural Engineering, 140(3), 04013077. doi:https://doi.org/10.1061/(asce)st.1943-541x.0000886
- Zhou, T. H., Li, W. C., Guan, Y., & Bai, L. (2014). Damage analysis of steel frames under cyclic load based on stress triaxiality. Engineering Mechanics, 31, 146–155.
- Zhou, G. W., Zhang, Z. Q., Li, A. Q., & Xu, J. J. (2012). Damping ratio of composite structures used in time-history analysis. Journal of Vibration and Shock, 31(16), 117–121.