Load rating of bridge-size reinforced concrete arch culverts

References

• Aagard, A. D. (2007). Rectification of 2-D to 3-D finite element analysis in buried concrete arches under discrete loading (master’s thesis). Department of Civil and environmental engineering, Brigham Young University, Provo, UT.
   Google Scholar
• Abdel-Karim, A. M., Tadros, M. K., & Benak, J. V. (1990). Live load distribution on concrete box culverts. Transportation Research Record (TRR): Journal of the Transportation Research Board, 1288, 136–151.
   Google Scholar
• Acharya, R. (2012). Improved load distribution for load rating of low-fill box structures (master’s thesis). Lawrence, Kansas: University of Kansas. Retrieved from https://kuscholarworks.ku.edu/handle/1808/10630
   Google Scholar
• ACI 318-14. (2014). Building code requirements for reinforced concrete (ISO# 193382007E). Farmington Hills, Michigan: American Concrete Institute.
   Google Scholar
• American Association of State Highway and Transportation Officials. (2002). AASHTO standard specifications for highway Bridges (17th ed.). Washington, D.C.: AASHTO.
   Google Scholar
• American Association of State Highway and Transportation Officials. (2015). Manual for bridge evaluation (2nd Edition) with 2015 Interim Revisions. Washington, DC: AASHTO.
   Google Scholar
• American Association of State Highway and Transportation Officials. (2017). AASHTO LRFD bridge design specifications (7th ed.). Washington, DC: AASHTO.
   Google Scholar
• Andersson, A. (2011). Capacity assessment of arch bridges with backfill, Case of the old Årsta railway bridge (PhD thesis), Bulletin 107. KTH Royal Institute of Technology, Sweden.
   Google Scholar
• Bjurstrom, H., & Lasell, J. (2009). Capacity assessment of a single span arch bridge with backfill - A case study of the Glomman Bridge (master’s thesis). KTH Royal Institute of Technology, Sweden.
   Google Scholar
• Boothby, T. E., Domalik, D. E., & Elgin, C. S. (1997). Load rating of masonry arch bridges and culverts (Res. Rep. No. FHWA/OH-96/016, Nat. Tech. Infor. Service No. PB-97-1485555). Columbus, OH: Ohio Department of Transportation.
   Google Scholar
• Boothby, T. E., & Fanning, P. J. (2002). Assessment methods for masonry arch bridges. Proceedings of Structural Faults and Repair Conference (6 p.).
   Google Scholar
• Boothby, T. E., & Fanning, P. J. (2004). Load-rating of masonry arch bridges: Refinements. Journal of Bridge Engineering, ASCE, 9(3), 304–307. doi:https://doi.org/10.1061/(ASCE)1084-0702(2004)9:3(304)
   Web of Science ®Google Scholar
• Boothby, T. E., Fanning, P. J., & Roberts, B. J. (2000). Modeling, assessment, and load-rating of masonry arch bridges. Transportation Research Board 79th Annual Meeting (Paper No. 000394.6).
   Google Scholar
• Brencich, A., & Francesco, U. D. (2004). Assessment of multispan masonry arch bridges. I: Simplified approach. Journal of Bridge Engineering, 9(6), 582–590. doi:https://doi.org/10.1061/(ASCE)1084-0702(2004)9:6(582)
   Google Scholar
• Chajes, M. (2002). Load rating of arch bridges (Technical Report). Newark, DE: Delaware Center for Transportation, University of Delaware.
   Google Scholar
• Citto, C., & Woodham, D. (2014). Evaluation and rating of masonry arch bridges. Proceedings of the 2014 Structures Congress: April 3-5, 2014, Boston, MA.
   Google Scholar
• Department of Transport, UK. (1993). The assessment of highway bridges and structures (A 16/93). London, UK: Her Majesty’s Stationary Office.
   Google Scholar
• Fanning, P. J., & Boothby, T. E. (2002). Three-dimensional modeling and full-scale testing of stone arch bridges. Computers & Structures, 79, 2645–2662.
   Web of Science ®Google Scholar
• Fanning, P. J., Boothby, T. E., & Roberts, B. J. (2001). Longitudinal and transverse effects in masonry arch assessment. Construction and Building Materials, 15(1), 51–60. doi:https://doi.org/10.1016/S0950-0618(00)00069-6
   Web of Science ®Google Scholar
• Federal Highway Administration. (2012). Bridge inspector’s reference manual (FHWA Report NHI 12-049, 2,004 pp.). Washington, DC.
   Google Scholar
• Gilbert, M., Melbourne, C., & Smith, C. (2006). Discussion of “assessment of multispan masonry arch bridges. I: Simplified approach” by Brencich and Francesco. Journal of Bridge Engineering, ASCE, 11(2), 257–261. doi:https://doi.org/10.1061/(ASCE)1084-0702(2006)11:2(257)
   Web of Science ®Google Scholar
• Halden, D. (1995). Performance criteria in arch bridge assessment. Arch Bridges: Proceedings of the First International Conference on Arch Bridges (pp. 439–448), Bolton, UK Thomas Telford, London.
   Google Scholar
• Hopkins, T. C., Beckham, T. L., Sun, C., & Ni, B. (2001). Resilient modulus of Kentucky soils (Technical report No. KTC-01-07/SPR-163-95-1F). Lexington, KY: Kentucky Transportation Center, University of Kentucky.
   Google Scholar
• Katona, M. G., Meinhert, D. F., Orillac, R., & Lee, C. H. (1979). Structural evaluation of new concepts for long-span culverts and culvert installations (Report No. FHWA-RD-79-115). Washington, DC: Federal Highway Administration.
   Google Scholar
• Kim, J. S., Garro, R., & Doty, D. (2009). A simplified load rating method for masonry and reinforced concrete arch bridges. Proceedings of AREMA Annual Conference 2009 (37 p.).
   Google Scholar
• Krajcinovic, D. (1996). Damage mechanics. New York: Elsevier.
   Google Scholar
• Lawson, W., Seo, H., Surles, J., & Morse, S. (2018). Impact of specialized hauling vehicles on load-rating older, bridge-class, reinforced concrete box culverts. Transportation Research Record: Journal of the Transportation Research Board, 2672(41), 87–14. doi:https://doi.org/10.1177/0361198118781148
   Web of Science ®Google Scholar
• Lawson, W. D., Seo, H., Surles, J. G., & Morse, S. M. (2017). Culvert rating guide (2nd ed.). Austin, TX: Texas Department of Transportation.
   Google Scholar
• Lekhnitskii, S. G. (1963). Theory of elasticity of an anisotropic elastic body. P. Fern (Trans.). San Francisco: Holden Day.
   Google Scholar
• Massachusetts Department of Transportation. (2013). LRFD bridge manual-2013 edition. Boston, MA.
   Google Scholar
• McGrath, T. J., & Mastroianni, E. P. (2002). Finite-element modeling of reinforced concrete arch under live load. Transportation Research Record: Journal of the Transportation Research Board, 1814(1), 203–210. doi:https://doi.org/10.3141/1814-24
   Google Scholar
• Mousavi, S. M., Jayawickrama, P. W., Wood, T. A., & Lawson, W. D. (2017, March 12–15). Selection of soil stiffnesses for the load rating of in-service culverts. Geotechnical Frontiers 2017 Transportation Facilities, Structure, and Site Investigation GSP 277, Orlando, FL. doi:https://doi.org/10.1061/9780784480441.024
   Google Scholar
• Seo, H., Wood, T. A., Javid, A. H., & Lawson, W. D. (2017). Simplified, system-level pavement stiffness model for box culvert load rating applications. Journal of Bridge Engineering, 22(10), 04017066. doi:https://doi.org/10.1061/(ASCE)BE.1943-5592.0001098
   Web of Science ®Google Scholar
• Sivakumar, B., Moses, F., & Ghosn, M. (2007). Legal truck loads and AASHTO legal loads for posting (Report 575, Project 12–63). Washington, DC: The National Cooperative Highway Research Council, Transportation Research Board.
   Google Scholar
• STAAD Pro V8i. (2012). Technical reference manual. Exton, PA: Bentley Structures, Inc.
   Google Scholar
• Wood, T. A., Lawson, W. D., Jayawickrama, P. W., & Newhouse, C. D. (2015). Evaluation of production models for load rating reinforced concrete box culverts. Journal of Bridge Engineering, 20(1), 04014057. doi:https://doi.org/10.1061/(ASCE)BE.1943-5592.0000638
   Web of Science ®Google Scholar
• Wood, T. A., Lawson, W. D., Surles, J. G., Jayawickrama, P. W., & Seo, H. (2016). Improved load rating of reinforced concrete box culverts using depth-calibrated live load attenuation. Journal of Bridge Engineering, 21(12), 04016095. doi:https://doi.org/10.1061/(ASCE)BE.1943-5592.0000967
   Web of Science ®Google Scholar
• Wood, T., Surles, J., Mousavi, M. S., Jayawickrama, P., Javid, A. H., Seo, H. Y., & Lawson, W. (2017, March 12–15). Modeling factors influencing culvert load rating: a parametric analysis. Paper #170030, Geotechnical Special Publication No. 277: Transportation Facilities, Structures, and Site Investigation (pp. 243–252), ASCE Geotechnical Frontiers, Orlando, FL.
   Google Scholar
• Wu, X. (2010). Load rating of existing masonry arch bridges in USA. 6th International Conference on Arch Bridges, Fuzhou, China.
   Google Scholar