References
- AASHTO MBE-3. (2018). Manual for Bridge Evaluation (3rd ed.). Washington, DC: AASHTO.
- Agdas, D., Rice, J., Martinez, J., & Lasa, I. (2016). Comparison of visual inspection and structural-health monitoring as bridge condition assessment methods. Journal of Performance of Constructed Facilities, 30(3), 04015049. doi:https://doi.org/10.1061/(ASCE)CF.1943-5509.0000802
- Ang, A. H.-S., & Tang, W. H. (2006). Probability concepts in engineering planning: Emphasis on applications to civil and environmental engineering (2nd ed.). New York: John Wiley and Sons, Inc.
- AS 5100.7. (2017). Bridge design – Part 7: Bridge assessment. Sydney: Standards Australia Limited.
- ASCE 41-13. (2014). Seismic evaluation and retrofit of existing buildings. Reston, VA: American Society of Civil Engineers.
- Bae, H., & Oliva, M. (2012). Moment and shear load distribution factors for multigirder bridges subjected to overloads. Journal of Bridge Engineering, 17(3), 519–527. doi:https://doi.org/10.1061/(ASCE)BE.1943-5592.0000271
- Bagge, N., Plos, M., & Popescu, C. (2019). A multi-level strategy for successively improved structural analysis of existing concrete bridges: Examination using a prestressed concrete bridge tested to failure. Structure and Infrastructure Engineering, 15(1), 27–53. doi:https://doi.org/10.1080/15732479.2018.1476562
- Bentz, E. (2010). MC2010: Shear strength of beams and implications of the new approaches. Fib Bulletin, 57, 15–30.
- Biezma, M., & Schanack, F. (2007). Collapse of steel bridges. Journal of Performance of Constructed Facilities, 21(5), 398–405. doi:https://doi.org/10.1061/(ASCE)0887-3828(2007)21:5(398)
- Biondini, F., & Frangopol, D. (2016). Life-cycle performance of deteriorating structural systems under uncertainty. Review. Journal of Structural Engineering (United States), 142(9), F4016001.
- Björnsson, I., Larsson Ivanov, O., Honfi, D., & Leander, J. (2019). Decision support framework for bridge condition assessments. Structural Safety, 81, 101874. doi:https://doi.org/10.1016/j.strusafe.2019.101874
- Cappello, C., Zonta, D., & Glisic, B. (2016). Expected utility theory for monitoring-based decision-making. Proceedings of the IEEE, 104(8), 1647–1661. doi:https://doi.org/10.1109/JPROC.2015.2511540
- Chou, K. C., Deatherage, J. H., Leatherwood, T. D., & Khayat, A. J. (1999). Innovative method for evaluating overweight vehicle permits. Journal of Bridge Engineering, 4(3), 221–227. doi:https://doi.org/10.1061/(ASCE)1084-0702(1999)4:3(221)
- Collins, M., Bentz, E., Sherwood, E., & Xie, L. (2008). An adequate theory for the shear strength of reinforced concrete structures. Magazine of Concrete Research, 60(9), 635–650. doi:https://doi.org/10.1680/macr.2008.60.9.635
- Correia, J., & Branco, F. (2006). New methodology: Permit checking of vehicular overloads. Journal of Bridge Engineering, 11(3), 274–281. doi:https://doi.org/10.1061/(ASCE)1084-0702(2006)11:3(274)
- CS 454. (2020). Assessment of highway bridges and structures. London: Highways England.
- Cunha, A., Caetano, E., Magalhães, F., & Moutinho, C. (2013). Recent perspectives in dynamic testing and monitoring of bridges. Structural Control and Health Monitoring, 20(6), 853–877. doi:https://doi.org/10.1002/stc.1516
- Diamantidis, D., Sykora, M., & Sousa, H. (2019). Quantifying the value of structural health information for decision support: Guide for practicing engineers. Retrieved December 2, 2020, from www.cost-tu1402.eu/Action/Deliverables/Guidelines
- Ditlevsen, O., & Friis-Hansen, P. (2009). Cost and benefit including value of life, health and environmental damage measured in time units. Structural Safety, 31(2), 136–142. doi:https://doi.org/10.1016/j.strusafe.2008.06.010
- Foster, S., Stewart, M., Loo, M., Ahammed, M., & Sirivivatnanon, V. (2016). Calibration of Australian Standard AS3600 concrete structures: Part I statistical analysis of material properties and model error. Australian Journal of Structural Engineering, 17(4), 242–253. doi:https://doi.org/10.1080/13287982.2016.1246793
- Frangopol, D. M. (2011). Life-cycle performance, management, and optimisation of structural systems under uncertainty: Accomplishments and challenges. Structure and Infrastructure Engineering, 7(6), 389–413. doi:https://doi.org/10.1080/15732471003594427
- Frangopol, D. M., Kallen, M.-J., & Noortwijk, J. M. v. (2004). Probabilistic models for life-cycle performance of deteriorating structures: Review and future directions. Progress in Structural Engineering and Materials, 6(4), 197–212. doi:https://doi.org/10.1002/pse.180
- Frangopol, D. M., & Liu, M. (2007). Maintenance and management of civil infrastructure based on condition, safety, optimization, and life-cycle cost. Structure and Infrastructure Engineering, 3(1), 29–41. doi:https://doi.org/10.1080/15732470500253164
- Frangopol, D. M., & Soliman, M. (2016). Life-cycle of structural systems: Recent achievements and future directions. Structure and Infrastructure Engineering, 12(1), 1–20. doi:https://doi.org/10.1080/15732479.2014.999794
- Fu, G., & Hag-Elsafi, O. (2000). Vehicular overloads: Load model, bridge safety, and permit checking. Journal of Bridge Engineering, 5(1), 49–57. doi:https://doi.org/10.1061/(ASCE)1084-0702(2000)5:1(49)
- Galambos, C. (1979). Highway bridge loadings. Engineering Structures, 1(5), 230–235. doi:https://doi.org/10.1016/0141-0296(79)90003-8
- Giordano, P., Prendergast, L., & Limongelli, M. (2020). A framework for assessing the value of information for health monitoring of scoured bridges. Journal of Civil Structural Health Monitoring, 10(3), 485–496. doi:https://doi.org/10.1007/s13349-020-00398-0
- Hille, F., Rohrmann, R., & Rücker, W. (2015). Guideline for the assessment of existing structures. In Bridge Management 5: Inspection, maintenance, assessment and repair (pp. 227–234). London: Thomas Telford Publishing.
- Jacob, B., & La Beaumelle, V. F. (2010). Improving truck safety: Potential of weigh-in-motion technology. IATSS Research, 34(1), 9–15. doi:https://doi.org/10.1016/j.iatssr.2010.06.003
- JCSS. (2001). Probabilistic model code. Joint Committee on Structural Safety (JCSS-OSTL/DIA/VROU -10-11-2000)
- Keogh, D., & O’Brien, E. (1996). Recommendations on the use of a 3-D grillage model for bridge deck analysis. Structural Engineering Review, 8(4), 357–366.
- Khan, M. S., Ghosh, S., Caprani, C., & Ghosh, J. (2018a, October). Metamodeling strategies for value of information computation. The Sixth International Symposium on Life-Cycle Civil Engineering (IALCCE), pp. 2169–2174. Ghent, Belgium.
- Khan, M. S., Ghosh, S., Caprani, C., & Ghosh, J. (2018b, July). Sensitivity analysis of value of information framework. The Ninth International Conference on Bridge Maintenance, Safety and Management (IABMAS), pp. 2082–2088. Melbourne, Australia.
- Khan, M. S., Ghosh, S., Caprani, C., & Ghosh, J. (2020). Sensitivity of value of information to model and measurement errors. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 6(4), 04020038. doi:https://doi.org/10.1061/AJRUA6.0001086
- Konakli, K., Sudret, B., & Faber, M. H. (2016). Numerical investigations into the value of information in lifecycle analysis of structural systems. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 2(3), B4015007.
- Lenner, R., & Sýkora, M. (2016). Partial factors for loads due to special vehicles on road bridges. Engineering Structures, 106, 137–146. doi:https://doi.org/10.1016/j.engstruct.2015.10.024
- Malings, C., & Pozzi, M. (2018). Value-of-information in spatio-temporal systems: Sensor placement and scheduling. Reliability Engineering & System Safety, 172, 45–57. doi:https://doi.org/10.1016/j.ress.2017.11.019
- Marelli, S., & Sudret, B. (2014). UQLab: A framework for uncertainty quantification in Matlab. In Vulnerability, uncertainty, and risk (pp. 2554–2563). Liverpool: American Society of Civil Engineers. doi:https://doi.org/10.1061/9780784413609.257
- Mohammadi, J., & Shah, N. (1992). Statistical evaluation of truck overloads. Journal of Transportation Engineering, 118(5), 651–665. doi:https://doi.org/10.1061/(ASCE)0733-947X(1992)118:5(651)
- Neves, A., Leander, J., González, I., & Karoumi, R. (2019). An approach to decision-making analysis for implementation of structural health monitoring in bridges. Structural Control and Health Monitoring, 26(6), e2352. doi:https://doi.org/10.1002/stc.2352
- Nicholson, B. (1997). Simple bridge design using prestressed beam. Leicester, UK: Prestressed Concrete Association.
- Nowak, A., & Collins, K. (2000). Reliability of structures. Boston, USA: McGraw-Hill.
- Olaszek, P., & Casas, J. R. (2019). Practical considerations regarding results from static and dynamic load testing of bridges. Frontiers in Built Environment, 5, 11. doi:https://doi.org/10.3389/fbuil.2019.00011
- Pozzi, M., & Der Kiureghian, A. (2011). Assessing the value of information for long-term structural health monitoring. Proceedings of SPIE - the international society for optical engineering, Vol. 7984. doi:https://doi.org/10.1117/12.881918
- Quirk, L., Matos, J., Murphy, J., & Pakrashi, V. (2018). Visual inspection and bridge management. Structure and Infrastructure Engineering, 14(3), 320–332. doi:https://doi.org/10.1080/15732479.2017.1352000
- Raiffa, H., & Schlaifer, R. (1968). Applied statistical decision theory. New York, NY: MIT Press.
- Saltelli, A., Ratto, M., Andres, T., Campolongo, F., Cariboni, J., & Gatelli, D. (2008). Global sensitivity analysis. The primer.
- Seo, J., Hu, J., & Lee, J. (2016). Summary review of structural health monitoring applications for highway bridges. Journal of Performance of Constructed Facilities, 30(4), 04015072. doi:https://doi.org/10.1061/(ASCE)CF.1943-5509.0000824
- Sousa, H., Costa, B. J. A., Henriques, A. A., Bento, J., & Figueiras, J. A. (2015). Assessment of traffic load events and structural effects on road bridges based on strain measurements. Journal of Civil Engineering and Management, 22(4), 457–469. doi:https://doi.org/10.3846/13923730.2014.897991
- Sousa, H., Wenzel, H., & Thöns, S. (2019). Quantifying the value of structural health information for decision support: Guide for operators. Retrieved December 2, 2020, from www.cost-tu1402.eu/Action/Deliverables/Guidelines
- Straub, D. (2014). Value of information analysis with structural reliability methods. Structural Safety, 49, 75–85. doi:https://doi.org/10.1016/j.strusafe.2013.08.006
- Thöns, S. (2018). On the value of monitoring information for the structural integrity and risk management. Computer-Aided Civil and Infrastructure Engineering, 33(1), 79–94. doi:https://doi.org/10.1111/mice.12332
- Thöns, S. (2019). Quantifying the value of structural health information for decision support: Guide for scientists. Retrieved December 2, 2020, from www.cost-tu1402.eu/Action/Deliverables/Guidelines
- Thöns, S., Döhler, M., & Long, L. (2018). On damage detection system information for structural systems. Structural Engineering International, 28(3), 255–268. doi:https://doi.org/10.1080/10168664.2018.1459222
- Thöns, S., & Stewart, M. (2020). On the cost-efficiency, significance and effectiveness of terrorism risk reduction strategies for buildings. Structural Safety, 85, 101957. doi:https://doi.org/10.1016/j.strusafe.2020.101957
- Yoshida, I., Tasaki, Y., Otake, Y., & Wu, S. (2018). Optimal sampling placement in a Gaussian random field based on value of information. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 4(3), 04018018. doi:https://doi.org/10.1061/AJRUA6.0000970
- Yu, Y., Zhao, X., Shi, Y., & Ou, J. (2013). Design of a real-time overload monitoring system for bridges and roads based on structural response. Measurement, 46(1), 345–352. doi:https://doi.org/10.1016/j.measurement.2012.07.006
- Zhang, J., Peng, H., & Cai, C. (2011). Field study of overload behavior of an existing reinforced concrete bridge under simulated vehicle loads. Journal of Bridge Engineering, 16(2), 226–237. doi:https://doi.org/10.1061/(ASCE)BE.1943-5592.0000140