Process capability control chart for non-normal data – evidence of on-going capability assessment

References

• Bickel, P.J., & Freedman, D.A. (1981). Some asymptotic theory for the bootstrap. The Annals of Statistics, 9, 1196–1217. Retrieved from http://www.jstor.org/journal/annalsstatistics
   Web of Science ®Google Scholar
• Bai, D.S., & Choi, S.S. (1997). Process capability indices for skewed populations. MS Thesis, Department of Industrial Engineering, Advanced Institute of Science and Technology, Taejon, South Korea.
   Google Scholar
• Clements, J.A. (1989). Process capability calculations for non-normal distributions. Quality Progress, September, 95–100. Retrieved from http://asq.org/quality-press/journal/index.html?item=SUBSCR_QP
   Google Scholar
• Chang, P.L., & Lu, K.H. (1994). PCI calculations for any shape of distribution with percentile. Quality World, technical section (September), 110–114. Retrieved from http://www.thecqi.org/Knowledge-Hub/Qualityworld/
   Google Scholar
• Chang, Y.S., Choi, I.S., & Bai, D.S. (2002). Process capability indices for skewed populations. Quality and Reliability Engineering International, 18, 383–393. doi:10.1002/qre.489
   Web of Science ®Google Scholar
• Castagliola, P., & Castellanos, J.V.G. (2005). Capability indices dedicated to the two quality characteristics case. Quality Technology and Quantitative Management, 2, 201–220. Retrieved from http://web.it.nctu.edu.tw/∼qtqm/
   Google Scholar
• Chen, K.S., & Pearn, W.L. (1997). An application of non-normal process capability indices. Quality and Reliability Engineering International, 13, 355–360. doi:10.1002/(SICI)1099-1638(199711/12)13:6<355::AID-QRE125>3.0.CO;2-V
   Web of Science ®Google Scholar
• Chen, K.S., Huang, H.L., & Huang, C.T. (2007). Control charts for one-sided capability indices. Quality & Quantity, 41, 413–427. doi:10.1007/s11135-006-9013-y
   Web of Science ®Google Scholar
• Efron B. (1979). Boot strap methods: Another look at the jack knife. The Annals of Statistics, 7, 1–26. Retrieved from http://www.jstor.org/journal/annalsstatistics
   Web of Science ®Google Scholar
• Efron, B. (1982). The Jackknife, the bootstrap and other resampling plans. Philadelphia, PA: Society for Industrial and Applied Mathematics.
   Google Scholar
• Franklin, L.A., & Wasserman, G.S. (1991). Bootstrap confidence interval estimates of Cpk: An introduction. Communications in Statistics: Simulation and Computation, 20, 231–242. doi:10.1080/03610919108812950
   Web of Science ®Google Scholar
• Franklin, L.A., & Wasserman, G.S. (1992). Bootstrap lower confidence limits for capability indices. Journal of Quality Technology, 24, 196–210. Retrieved from http://asq.org/pub/jqt/
   Web of Science ®Google Scholar
• Han, C.P. (2006). Effect of testing normality on estimating process capability indices. Quality Engineering, 18, 391–395. doi:10.1080/08982110600719514
   Google Scholar
• Hsu, C., Chen, T., Lii, P., & Hsu, S. (2011). Applying 6 sigma in quality improvement of TFT-LCD panel. Journal of Computational Information Systems, 7, 1013–1020. Retrieved from http://www.jofcis.com/
   Google Scholar
• Kotz, S., & Lovelace, C. (1998). Process capability indices in theory and practice. London, UK: Arnold.
   Google Scholar
• Leger, C., Politis, D., & Romano, J. (1992). Bootstrap technology and applications. Technometrics, 34, 378–398. doi:10.1080/00401706.1992.10484950
   Web of Science ®Google Scholar
• Liao, M.Y., Pearn, W.L., & Liu, Y.L. (2015). Assessing the actual Gamma process quality – A curve-fitting approach for modifying the non-normal flexible index. International Journal of Production Research, 53, 4720–4734. doi:10.1080/00207543.2015.1041572
   Web of Science ®Google Scholar
• Maiti, S.S., Saha, M., & Nanda, A.K. (2010). On generalizing process capability indices. Quality Technology and Quantitative Management, 7, 279–300. Retrieved from http://web.it.nctu.edu.tw/∼qtqm/
   Web of Science ®Google Scholar
• Pearn, W.L., & Chen, K.S. (1997). Capability indices for non-normal distributions with an application in electrolytic capacitor manufacturing. Microelectronics and Reliability, 37, 1853–1858. doi:10.1016/S0026-2714(97)00023-1
   Web of Science ®Google Scholar
• Pearn, W.L., Wu, C.W., & Wang, K.H. (2005). Capability measure for asymmetric tolerance non-normal processes applied to speaker driver manufacturing. International Journal of Advanced Manufacturing Technology, 25, 506–515. doi:10.1007/s00170-003-1858-9
   Web of Science ®Google Scholar
• Pearn, W.L., & Kotz, S. (2006). Encyclopedia and handbook of process capability indices: A comprehensive exposition of quality control measures. Singapore: World Scientific Publishing Co. Pte. Ltd.
   Google Scholar
• Pearn, W.L., & Wu, C.H. (2013). Supplier selection for multiple-characteristics processes with one-sided specifications. Quality Technology and Quantitative Management, 10, 133–139. Retrieved from http://web.it.nctu.edu.tw/∼qtqm/
   Web of Science ®Google Scholar
• Pearn, W.L., Wu, C.W., & Lin, H.C. (2004). Procedure for supplier selection based on Cpm applied to super twisted nematic liquid crystal display processes. International Journal of Production Research, 42, 2719–2734. doi:10.1080/0020754042000203876
   Web of Science ®Google Scholar
• Polansky, A.M. (1998). A smooth nonparametric approach to process capability. Quality and Reliability Engineering International, 14, 43–48. doi:10.1002/(SICI)1099-1638(199801/02)14:1<43::AID-QRE146>3.0.CO;2-K
   Web of Science ®Google Scholar
• Rodriguer, R.N. (1992). Recent developments in process capability analysis. Journal of Quality Technology, 24, 176–187. Retrieved from http://asq.org/pub/jqt/
   Google Scholar
• Spiring, F.A. (1995). Process capability: A total quality management tool. Total Quality Management, 6, 21–33. doi:10.1080/09544129550035558
   Web of Science ®Google Scholar
• Seppala, T. (1995). Statistical process control via the subgroup bootstrap. Journal of Quality Technology, 27, 139–153. Retrieved from http://asq.org/pub/jqt/
   Web of Science ®Google Scholar
• Schneider, H., Pruett, J., & Lagrange, C. (1995). Uses of process capability indices in the supplier certification process. Quality Engineering, 8, 225–235. doi:10.1080/08982119508904621
   Google Scholar
• Sarkar, A., & Pal, S. (1997). Estimation of process capability index for concentricity. Quality Engineering, 9, 665–671. Retrieved from http://www.tandfonline.com/loi/lqen20#.Vv-nUk1Jk2w
   Google Scholar
• Somerville, S.E., & Montgomery, D.C. (1996–1997). Process capability indices and non-normal distributions. Quality Engineering, 9, 305–316. Retrieved from http://www.tandfonline.com/loi/lqen20#.Vv-nUk1Jk2w
   Google Scholar
• Shore, H. (1998). A new approach to analyzing non-normal quality data with application to process capability analysis. International Journal of Production Research, 36, 1917–1933. doi:10.1080/002075498193039
   Web of Science ®Google Scholar
• Spiring, F., Leung, B., Cheng, S., & Yeung, A. (2003). A bibliography of process capability papers. Quality & Reliability Engineering International, 19, 445–460. doi:10.1002/qre.538
   Web of Science ®Google Scholar
• Tang, L.C., & Than, S.E. (1999). Computing process capability indices for non-normal data: A review and comparative study. Quality and Reliability Engineering International, 15, 339–353. doi:10.1002/(SICI)1099-1638(199909/10)15:5<339::AID-QRE259>3.0.CO;2-A
   Web of Science ®Google Scholar
• Vännman, K. (2006). Safety regions in process capability plots. Quality Technology and Quantitative Management, 3, 227–246. Retrieved from http://web.it.nctu.edu.tw/∼qtqm/
   Google Scholar
• Wu, C.W., Liao, M.Y., & Yang, T.T. (2013). Efficient methods for comparing two process yields-strategies on supplier selection. International Journal of Production Research, 51, 1587–1602. doi:10.1080/00207543.2012.718450
   Web of Science ®Google Scholar
• Wu, C.W., Pearn, W.L., Chang, C.S., & Chen, H.C. (2007). Accuracy analysis of the percentile method for estimating non-normal manufacturing quality. Communications in Statistics—Simulation and Computation, 36, 657–697. doi:10.1080/03610910701212785
   Web of Science ®Google Scholar
• Wu, C.W., Pearn, W.L., & Kotz, S. (2009). An overview of theory and practice on process capability indices for quality assurance. International Journal of Production Economics, 117, 338–359. doi:10.1016/j.ijpe.2008.11.008
   Web of Science ®Google Scholar
• Wu, H.H., Swain, J.J., Farrington, P.A., & Messimer, S.L. (1999). Weighted variance capability index for general non-normal processes. Quality and Reliability Engineering International, 15, 397–402. doi:10.1002/(SICI)1099-1638(199909/10)15:5<397::AID-QRE274>3.0.CO;2-N
   Web of Science ®Google Scholar
• Zwick, D. (1995). A hybrid method for fitting distributions to data and its use in computing process capability indices. Quality Engineering, 7, 601–613. Retrieved from http://www.tandfonline.com/loi/lqen20#.Vv-nUk1Jk2w
   Google Scholar