References
- Austin, S., Jerard, R., Drysdale, R., Comparison of discretization algorithms for NURBS surfaces with application to numerically controlled machining, Computer-Aided Design, Vol. 29, 1997, pp 71–83.
- Bassett, C. P., Jensen, C. G., Bosley, J. E., Luo, Y., Red, W. E., Evans, M. S., Direct Machining Architectures Using CAD-CAM Generative Methods, Proceedings of the IASTED International Conference on Control and Applications, 2000, pp 287–295.
- Bassett, C. P., Jensen, C. G., Red, W. E., Evans, M. S., Direct Machining: a New Paradigm for Machining Data Transfer, Proceedings of DETC2000/DFM-14298: ASME 5th Design for Manufacturing Conference, September 10–13, Baltimore, Maryland, 2000.
- Ding, S., Mannan, M., Poo, A., Yang, D., Han, Z., Adaptive iso-planar tool path generation for machining of free-form surfaces. Computer-Aided Design, Vol. 35, 2003, pp 141–153.
- Evans, M. S., Red, W. E., Jensen, C. G., McBride, C., Ghimire, G., Open Architecture for Servo Control using a Digital Control Interface, Proceedings of the IASTED International Conference on Control and Application, 2000, pp 339–344.
- Huang, H., Lin, G., Rapid and flexible prototyping through a dual-robot workcell, Robotics and Computer Integrated Manufacturing, Vol. 19, 2003, pp 263–272.
- Koren, Y., Pasek, Z. J., Ulsoy, A. G., Benchetrit, U., Real-Time Open Control Architectures and System Performance, Annals of the CIRP, Vol. 45, 1996, pp 377–380.
- Lartigue, C., Thiebaut, F., Maekawa, T., CNC tool path in terms of B-spline curves, Computer-Aided Design, Vol. 33, 2001, pp 307–319.
- Newman, S. T., Allen, R. D., Rosso, R. S. U. Jr., CAD/CAM solutions for STEP Compliant CNC Manufacture, Proceedings of the 1st CIRP(UK) Seminar on Digital Enterprise Technology, 2002, pp 123–128.
- Oldknow, K. D., Yellowley, I., Design, Implementation, and Validation of a System for the Dynamic Reconfiguration of Open Architecture Machine Tool Controls, International Journal of Machine Tools & Manufacture, Vol. 41, 2001, pp 795–808.
- Red, E., A dynamic optimal trajectory generator for Cartesian Path following. Robotica, Vol. 18, 2000 pp 451–458.
- Red, E., Evans, M., Jensen, G., Bosley, J., Luo, Y., Architecture for Motion Planning and Trajectory Control of a Direct Machining Application, Proceedings of the IASTED International Conference on Control and Applications, 2000, pp 484–489.
- Suh, S., Chung, D., Lee, B., Cho, J., Cheon, S., Hong, H., Lee, H., Developing an Integrated STEP-Compliant CNC Prototype, Journal of Manufacturing Systems, Vol. 21, 2002, pp 350–362.
- Wright, P., Schofield, S., Open Architecture Controllers for Machine Tools, Part 1: Design Principles, Journal of Manufacturing Science and Engineering, Vol. 120, 1998, pp 417–424.
- Wright, P., Wang, F. C., Open Architecture Controllers for Machine Tools, Part 2: A Real Time Quintic Spline Interpolator, Journal of Manufacturing Science and Engineering, Vol. 120, 1998, pp 425–432.
- Yang, Z., Red, E., On-line Cartesian trajectory control of mechanisms along complex curves, Robotica, Vol. 15, 1997, pp 263–274.
- Yoshimoto, F., Harada, T., Yoshimoto, Y., Data fitting with a spline using a real-coded genetic algorithm, Computer-Aided Design, Vol. 35, 2003, pp 751–760.