Electrothermal static contact: inverse analysis and experimental approach

References

• Holm, R, 1967. Electric Contacts. Theory and application. Berlin: Springer-Verlag; 1967.
   Google Scholar
• 1995. Fechant, L, ed. Le Contact Électrique: Phénomène Physique et Matériaux. Paris: Hermes, Collection SEE; 1995.
   Google Scholar
• Mazo, L, Cassagne, B, Badie-Levet, D, and Bardon, JP, 1978. Etude des conditions de liaison thermique dans le cas du frottement sec métal-plastique, Revue Générale de Thermique. 204 (1978), pp. 919–933.
   Google Scholar
• Mazo, L, 1977. Contribution à l’étude thermocinétique du frottement métal-plastique. Thèse de doctorat, Université de Nantes; 1977.
   Google Scholar
• Badie-Levet, D, 1984. Champs de température engendrés par le frottement de deux anneaux concentriques en rotation relative, dans le cas d’une condition de contact imparfait, Revue Générale de Thermique 275 (1984), pp. 671–679.
   Google Scholar
• Bardon, JP, 1994. Bases Physiques des conditions de contact thermique imparfait entre deux milieux en glissement relatif, Revue Générale de Thermique 386 (1994), pp. 85–91.
   Google Scholar
• Chantrenne, P, and Raynaud, M, 1997. A microscopic thermal model for dry sliding contact, Int. J. Heat Mass Transf. 40 (1997), pp. 1083–1094.
   Web of Science ®Google Scholar
• Laraqi, N, 1992. Température de contact et coefficient de partage du flux généré par frottement sec entre deux solides. Approche nouvelle de la génération de flux, Int. J. Heat Mass Transf. 35 (1992), pp. 3131–3139.
   Google Scholar
• Bauzin, J-G, and Laraqi, N, Experimental determination of the thermal contact resistance and the local heat partition coefficient at the interface of two solids in dry friction. Presented at Proceedings of 12th IHTC. Grenoble, 27–32, 2002.
   Google Scholar
• Bauzin, J-G, and Laraqi, N, Estimation of thermal contact parameters at the interface between two sliding solids. Presented at Proceedings of Eurotherm 68. Poitiers, 2001.
   Google Scholar
• Bauzin, JG, and Laraqi, N, 2004. Simultaneous estimation of frictional heat flux and two thermal contact parameters for sliding solids, Numer. Heat Transf. 45 (2004), pp. 313–328.
   Web of Science ®Google Scholar
• Alilat, N, Baïri, A, and Laraqi, N, 2004. Three-dimensional calculation of temperature in a rotating disk subjected to an eccentric circular heat source and surface cooling, Numer. Heat Transf. 46 (2004), pp. 167–180.
   Web of Science ®Google Scholar
• Laraqi, N, 2003. An exact explicit analytical solution for steady-state temperature of a half space subjected to a circular moving heat source, ASME J. Tribol. 125 (2003), pp. 859–862.
   Web of Science ®Google Scholar
• Meur, GLe, 2002. Etude de la condition de liaison thermique à une interface de contact solide–solide siège d’une dissipation par effet Joule: Application au soudage par résistance. Thèse de Doctorat, Université de Nantes; 2002.
   Google Scholar
• Thieblemont, E, 1992. Modélisation du soudage par résistance par point. Thèse de doctorat, Institut Polytechnique de Lorraine; 1992.
   Google Scholar
• Brady, GS, and Clauser, HR, 1979. Materials Handbook. New York: McGraw & Hill; 1979.
   Google Scholar
• Steiner, R, 1990. ASM Handbook: Properties and Selection: Irons, Steels, and High Performance Alloys. Vol. 1. Materials Park, Ohio, USA: ASM International; 1990.
   Google Scholar
• Özisik, MN, and Orlande, HRB, 2000. Inverse Heat Transfer.. New York: Taylor & Francis; 2000.
   Google Scholar
• Kenney, JF, and Keeping, ES, 1962. "Linear regression and correlation". In: Nostrand, Van, ed. in Mathematics of Statistics, Pt. 1. NJ: Princeton; 1962, Chapter 15.
   Google Scholar
• Tikhonov, AN, and Arsenin, VY, 1977. Solution of Ill-posed Problems. Washington DC: Winston & Sons; 1977.
   Google Scholar
• Tikhonov, AN, 1963. Solution of incorrectly posed problems and the regularization method, Soviet Math. Dokl. 4 (1963), pp. 1035–1038.
   Google Scholar
• Tikhonov, AN, 1963. Regularization of incorrectly posed problems, Soviet Math. Dokl. 4 (1963), pp. 1624–1627.
   Google Scholar
• Tikhonov, AN, 1975. Inverse problems in heat conduction, J. Eng. Phys. 29 (1975), pp. 816–820.
   Google Scholar
• Huang, CH, and Özisik, MN, 1991. Optimal regularization method to determine the strength of a plane surface heat source, Int. J. Heat Fluid Flow 12 (1991), pp. 173–178.
   Web of Science ®Google Scholar
• Levenberg, K, 1944. A method for the solution of certain non-linear problem in least squares, Quart. Appl. Math. 2 (1944), pp. 164–168.
   Google Scholar
• Marquardt, DW, 1963. An algorithm for least squares estimation of non-linear parameters, J. Soc. Ind. Appl. Math. 11 (1963), pp. 431–441.
   Google Scholar
• Bard, YB, 1974. Non-linear Parameter Estimation. New York: Academic Press; 1974.
   Google Scholar
• Beck, JV, and Arnold, KJ, 1977. Parameter Estimation in Engineering and Science. New York: Wiley; 1977.
   Google Scholar
• Dennis, J, and Schnabel, R, 1983. Numerical Methods for Unconstrained Optimization and Non-linear Equations. New Jersey: Prentice Hall; 1983.
   Google Scholar
• Özisik, MN, 1993. Heat Conduction. New York: Wiley; 1993.
   Google Scholar
• Bourouga, B, Goizet, V, and Bardon, JP, 2000. Les aspects théoriques régissant l'instrumentation d'un capteur thermique pariétal à faible inertie, Int. J. Therm. Sci. 39 (2000), pp. 96–109.
   Google Scholar
• Sorin, A, Bourouga, B, Gilles, J, and Dupont, A, 2002. Etude Numérique du caractère intrusif de l’instrumentation pariétale par thermocouple. Vittel: Congrès Annuel de la SFT; 2002.
   Google Scholar