Inverse identification of elastic modulus of dental implant–bone interfacial tissue using neural network and FEA model

References

• Brunski, JB, 1999. In vivo bone response to biomechanical loading at the bone/dental-implant interface, Adv. Dent. Res. 13 (1999), pp. 99–119.
   PubMedGoogle Scholar
• Duyck, J, Rønold, HJ, Oosterwyck, HV, Naert, I, Sloten, VJ, and Ellingsen, JE, 2001. The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: An animal experimental study, Clin. Oral Implants Res. 12 (2001), pp. 207–218.
   PubMed Web of Science ®Google Scholar
• Cowin, SC, 1986. Wolff's law of trabecular architecture at remodeling equilibrium, J. Biomech. Eng. 108 (1986), pp. 83–88.
   PubMed Web of Science ®Google Scholar
• Turner, CH, and Burr, DB, 2001. Cowin, SC, ed. Bone Mechanics Handbook. Florida: CRC Press LLC; 2001. pp. 7.1–7.24.
   Google Scholar
• Weinstein, AM, Klawitter, JJ, Anand, SC, and Schuessler, R, 1976. Stress analysis of porous rooted dental implants, J. Dent. Res. 55 (1976), pp. 772–777.
   PubMed Web of Science ®Google Scholar
• Geng, JP, Tan, KBC, and Liu, GR, 2001. Application of finite element analysis in implant dentistry: A review of the literature, J. Prosthet. Dent. 85 (2001), pp. 585–598.
   PubMed Web of Science ®Google Scholar
• Geng, JP, Ma, QS, Tan, KBC, and Liu, GR, 2004. Finite element analysis of four thread-form configurations in a stepped screw implant, J. Oral Rehab. 31 (2004), pp. 233–239.
   PubMed Web of Science ®Google Scholar
• Geng, JP, Xu, DW, Tan, KBC, and Liu, GR, 2004. Finite element analysis of an osseointegrated stepped screw dental implant, J. Oral Implantol. 30 (2004), pp. 223–233.
   PubMedGoogle Scholar
• Hansson, S, and Werke, M, 2003. The implant thread as a retention element in cortical bone: The effect of thread size and thread profile: A finite element study, J. Biomech. 36 (2003), pp. 1247–1258.
   PubMed Web of Science ®Google Scholar
• O’Mahony, AM, Williams, JL, and Spencer, P, 2001. Anisotropic elasticity of cortical and cancellous bone in the posterior mandible increases peri-implant stress and strain under oblique loading, Clin. Oral Implants Res. 12 (2001), pp. 648–657.
   PubMed Web of Science ®Google Scholar
• Natali, AN, and Pavan, PG, 2003. Natali, AN, ed. Dental Biomechanics. London: Taylor & Francis; 2003. pp. 211–213.
   Google Scholar
• Deng, B, Tan, KBC, and Liu, GR, 2008. Influence of osseointegration degree and pattern on resonance frequency in the assessment of dental implant stability using finite element analysis, Int. J. Oral Maxillofac. Implants 23 (2008), pp. 1082–1088.
   PubMed Web of Science ®Google Scholar
• Deng, B, Tan, KBC, Liu, GR, Geng, JP, and Yan, WQ, 2008. A new numerical approach for evaluation of dental implant stability using electromagnetic impulse, Internal Chin. J. Dent. 8 (2008), pp. 1–9.
   Google Scholar
• Liu, GR, and Han, X, 2003. Computational Inverse Techniques in Nondestructive Evaluation. Florida: CRC Press LLC; 2003.
   Google Scholar
• Sribar, R, 1994. Solutions of inverse problems in elastic wave propagation with artificial neural networks.. Ph.D thesis. Ithaca, New York: Cornell University Press; 1994.
   Google Scholar
• Huber, N, and Tsakmakis, C, 1999. Determination of constitutive properties from spherical indentation data using neural networks. Part I: The case of pure kinematic hardening in plasticity laws, J. Mech. Phys. Solids 47 (1999), pp. 1569–1588.
   Web of Science ®Google Scholar
• Sumpter, BG, and Noid, DW, 1996. On the design, analysis, and characterization of materials using computational neural networks, Annu. Rev. Mater. Sci. 26 (1996), pp. 223–277.
   Web of Science ®Google Scholar
• Liu, GR, Han, X, and Lam, KY, 2001. Material characterization of FGM plates using elastic waves and an inverse procedure, J. Compos. Mater. 35 (2001), pp. 954–971.
   Web of Science ®Google Scholar
• Liu, GR, Xu, YG, and Wu, ZP, 2001. Total solution for structural mechanics problems, Comput. Methods Appl. Mech. Eng. 191 (2001), pp. 989–1012.
   Web of Science ®Google Scholar
• Liu, GR, Han, X, Xu, YG, and Lam, KY, 2001. Material characterization of functionally graded material by means of elastic waves and a progressive-learning neural network, Compos. Sci. Technol. 61 (2001), pp. 1401–1411.
   Web of Science ®Google Scholar
• Liu, GR, Han, X, and Ohyoshi, T, 2002. Computational inverse techniques for material characterization using dynamic response, Int. J. Soc. Mater. Eng. Res. 10 (2002), pp. 26–33.
   Google Scholar
• Han, X, Xu, DL, and Liu, GR, 2003. A computational inverse technique for material characterization of a functionally graded cylinder using a progressive neural network, Neurocomputing 51 (2003), pp. 341–360.
   Web of Science ®Google Scholar
• Albrektsson, T, Berglundh, T, and Lindhe, J, 2003. "Osseointegration: Historic background and current concepts". In: Lindhe, J, Karring, T, and Lang, NP, eds. Clinical Periodontology and Implant Dentistry. Oxford, Malden: Blackwell Science; 2003. pp. 809–820.
   Google Scholar
• Huja, SS, and Roberts, WE, 2004. Mechanism of Osseointegration: Characterization of supporting bone with indentation testing and backscattered imaging, Semin. Orthod. 10 (2004), pp. 162–173.
   Google Scholar
• Chang, MC, Ko, CC, Liu, CC, Douglas, WH, DeLong, R, Seong, WJ, Hodges, J, and An, KN, 2003. Elasticity of alveolar bone near dental implant–bone interfaces after one month's healing, J. Biomech. 36 (2003), pp. 1209–1214.
   PubMed Web of Science ®Google Scholar
• Merz, B, Hunenbart, S, and Belser, U, 2000. Mechanics of the implant-abutment connection: An 8-degree taper compared to a butt joint connection, Int. J. Oral Maxillofac. Implants 15 (2000), pp. 519–526.
   PubMed Web of Science ®Google Scholar
• Masri, SF, Chassiako, AG, and Ganghey, TK, 1993. Identification of nonlinear dynamic systems using neural network, J. Appl. Mech. 60 (1993), pp. 123–133.
   Web of Science ®Google Scholar
• Han, LF, Li, GY, Han, X, and Zhong, ZH, 2006. Identification of geometric parameters of drawbead in metal forming processes, Inverse Prob. Sci. Eng. 14 (2006), pp. 233–244.
   Web of Science ®Google Scholar
• Han, X, Jiang, C, Li, GY, Zhong, ZH, and Hu, DB, 2006. An inversion procedure for determination of variable binder force in U-shaped forming, Inverse Prob. Sci. Eng. 14 (2006), pp. 301–312.
   Web of Science ®Google Scholar
• Park, SH, 1996. Robust Design and Analysis for Quality Engineering. London: Chapman and Hall; 1996.
   Google Scholar
• Han, X, Liu, GR, and Lam, KY, 2000. A quadratic layer element for analyzing stress waves in FGMs and its application in material characterization, J. Sound Vibrat. 236 (2000), pp. 307–321.
   Web of Science ®Google Scholar
• Topping, BHV, and Bahreininejad, A, 1997. Neural Computing for Structural Mechanics. Edinburgh: Saxe-Coburg Publications; 1997.
   Google Scholar
• Brunski, JB, Puleo, DA, and Nanci, A, 2000. Biomaterials and biomechanics of oral and maxillofacial implants: Current status and future developments, Int. J. Oral Maxillofac. Implants 15 (2000), pp. 15–46.
   PubMed Web of Science ®Google Scholar