Inverse computation of cohesive fracture properties from displacement fields

References

• Barenblatt, GI, 1959. The formation of equilibrium cracks during brittle fracture: General ideas and hypotheses. Axially-symmetric cracks, J. Appl. Math. Mech. 23 (1959), pp. 622–636.
   Google Scholar
• Dugdale, DS, 1960. Yielding of steel sheets containing slits, J. Mech. Phys. Solids 8 (1960), pp. 100–104.
   Web of Science ®Google Scholar
• Hillerborg, A, Modéer, M, and Petersson, PE, 1976. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cem. Concr. Res. 6 (1976), pp. 773–781.
   Google Scholar
• Xu, XP, and Needleman, A, 1994. Numerical simulations of fast crack growth in brittle solids, J. Mech. Phys. Solids 42 (1994), pp. 1397–1434.
   Web of Science ®Google Scholar
• Zhang, Z, and Paulino, GH, 2005. Cohesive zone modeling of dynamic failure in homogeneous and functionally graded materials, Int. J. Plast. 21 (2005), pp. 1195–1254.
   Web of Science ®Google Scholar
• Camacho, GT, and Ortiz, M, 1996. Computational modeling of impact damage in brittle materials, Int. J. Solids Struct. 33 (1996), pp. 2899–2938.
   Web of Science ®Google Scholar
• Ortiz, M, and Pandolfi, A, 1999. Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis, Int. J. Numer. Methods Eng. 44 (1999), pp. 1267–1282.
   Web of Science ®Google Scholar
• Zhang, Z, and Paulino, GH, 2007. Wave propagation and dynamic analysis of smoothly graded heterogeneous continua using graded finite elements, Int. J. Solids Struct. 44 (2007), pp. 3601–3626.
   Web of Science ®Google Scholar
• Moes, N, and Belytschko, T, 2002. Extended finite element method for cohesive crack growth, Eng. Fract. Mech. 69 (2002), pp. 813–833.
   Web of Science ®Google Scholar
• Wells, GN, and Sluys, LJ, 2001. A new method for modeling cohesive cracks using finite elements, Int. J. Numer. Methods Eng. 50 (2001), pp. 2667–2682.
   Web of Science ®Google Scholar
• Rahulkumar, P, 2000. Cohesive element modeling of viscoelastic fracture: Application to peel testing of polymers, Int. J. Solids Struct. 37 (2000), pp. 1873–1897.
   Web of Science ®Google Scholar
• Zhang, Z, Paulino, GH, and Celes, W, 2007. Extrinsic cohesive modeling of dynamic fracture and microbranching instability in brittle materials, Int. J. Numer. Methods Eng. 72 (2007), pp. 893–923.
   Web of Science ®Google Scholar
• Roesler, J, Paulino, GH, Park, K, and Gaedicke, C, 2007. Concrete fracture prediction using bilinear softening, Cem. Concr. Compos. 29 (2007), pp. 300–312.
   Web of Science ®Google Scholar
• Shim, D-J, Paulino, GH, and Dodds, RH, 2006. J resistance behavior in functionally graded materials using cohesive zone and modified boundary layer models, Int. J. Fract. 139 (2006), pp. 91–117.
   Web of Science ®Google Scholar
• Song, SH, Paulino, GH, and Buttlar, WG, 2006. Simulation of crack propagation in asphalt concrete using an intrinsic cohesive zone model, ASCE J. Eng. Mech. 132 (2006), pp. 1215–1223.
   Web of Science ®Google Scholar
• Song, SH, Paulino, GH, and Buttlar, WG, 2008. "Influence of the cohesive zone model shape parameter on asphalt concrete fracture behavior". In: Paulino, GH, Pindera, M-J, Dodds, RH, Rochinha, FA, Dave, EV, and Chen, L, eds. Multiscale and Functionally Graded Materials, AIP Conference Proceedings 973. 2008. pp. 730–735.
   Google Scholar
• van Mier, JGM, and van Vliet, MRA, 2002. Uniaxial tension test for the determination of fracture parameters of concrete: State of the art, Fract. Concrete Rock 69 (2002), pp. 235–247.
   Google Scholar
• Yang, J, and Fischer, G, 2006. "Simulation of the tensile stress-strain behavior of strain hardening cementitious composites". In: Konsta-Gdoutos, MS, ed. Measuring, Monitoring and Modeling Concrete Properties. Springer: Dordrecht; 2006. pp. 25–31.
   Google Scholar
• Shah, SP, Ouyang, C, and Swartz, SE, 1995. Fracture Mechanics of Concrete: Applications of Fracture Mechanics to Concrete, Rock and other Quasi-brittle Materials. New York: Wiley; 1995.
   Google Scholar
• Volokh, KY, 2004. Comparison between cohesive zone models, Commun. Numer. Methods Eng. 20 (2004), pp. 845–856.
   Web of Science ®Google Scholar
• Bolzon, G, Fedele, R, and Maier, G, 2002. Parameter identification of a cohesive crack model by Kalman filter, Comput. Methods Appl. Mech. Eng. 191 (2002), pp. 2847–2871.
   Web of Science ®Google Scholar
• Maier, G, Bocciarelli, M, Bolzon, G, and Fedele, R, 2006. Inverse analyses in fracture mechanics, Int. J. Fract. 138 (2006), pp. 47–73.
   Web of Science ®Google Scholar
• Que, NS, and Tin-Loi, F, 2002. Numerical evaluation of cohesive fracture parameters from a wedge splitting test, Eng. Fract. Mech. 69 (2002), pp. 1269–1286.
   Web of Science ®Google Scholar
• Que, NS, and Tin-Loi, F, 2002. An optimization approach for indirect identification of cohesive crack properties, Comput. Struct. 80 (2002), pp. 1383–1392.
   Web of Science ®Google Scholar
• Tin-Loi, F, and Que, NS, 2002. Nonlinear programming approaches for an inverse problem in quasibrittle fracture, Int. J. Mech. Sci. 44 (2002), pp. 843–858.
   Web of Science ®Google Scholar
• van Mier, JGM, 1997. Fracture Processes of Concrete: Assessment of Material Parameters for Fracture Models. Boca Raton: CRC Press; 1997.
   Google Scholar
• Elices, M, 2002. The cohesive zone model: Advantages, limitations and challenges, Eng. Fract. Mech. 69 (2002), pp. 137–163.
   Web of Science ®Google Scholar
• Seong Hyeok, S, Paulino, GH, and Buttlar, WG, 2006. A bilinear cohesive zone model tailored for fracture of asphalt concrete considering viscoelastic bulk material, Eng. Fract. Mech. 73 (2006), pp. 2829–2848.
   Web of Science ®Google Scholar
• Song, SH, Paulino, GH, and Buttlar, WG, 2005. Cohesive zone simulation of mode I and mixed-mode crack propagation in asphalt concrete. Geo-Frontiers 2005. Reston, VA, Austin, TX, USA: ASCE; 2005. pp. 189–198.
   Google Scholar
• Dally, JW, and Riley, WF, 2005. Experimental Stress Analysis. Knoxville, Tenn: College House Enterprises; 2005.
   Google Scholar
• Bonnet, M, and Constantinescu, A, 2005. Inverse problems in elasticity, Inverse Prob. 21 (2005), pp. 1–50.
   Web of Science ®Google Scholar
• Avril, S, Bonnet, M, Bretelle, A-S, Grediac, M, Hild, F, Ienny, P, Latourte, F, Lemosse, D, Pagano, S, Pagnacco, E, and Pierron, F, 2008. Overview of identification methods of mechanical parameters based on full-field measurements, Exp. Mech. 48 (2008), pp. 381–402.
   Web of Science ®Google Scholar
• Abanto-Bueno, J, and Lambros, J, 2002. Investigation of crack growth in functionally graded materials using digital image correlation, Eng. Fract. Mech. 69 (2002), pp. 1695–1711.
   Web of Science ®Google Scholar
• Abanto-Bueno, J, and Lambros, J, 2005. Experimental determination of cohesive failure properties of a photodegradable copolymer, Exp. Mech. 45 (2005), pp. 144–152.
   Web of Science ®Google Scholar
• Tan, H, Liu, C, Huang, Y, and Geubelle, PH, 2005. The cohesive law for the particle/matrix interfaces in high explosives, J. Mech. Phys. Solids 53 (2005), pp. 1892–1917.
   Web of Science ®Google Scholar
• Geymonat, G, and Pagano, S, 2003. Identification of mechanical properties by displacement field measurement: A variational approach, Meccanica 38 (2003), pp. 535–545.
   Web of Science ®Google Scholar
• Roux, S, and Hild, F, 2008. Digital image mechanical identification (DIMI), Exp. Mech. 48 (2008), pp. 495–508.
   Web of Science ®Google Scholar
• Genovese, K, Lamberti, L, and Pappalettere, C, 2005. Improved global-local simulated annealing formulation for solving non-smooth engineering optimization problems, Int. J. Solids Struct. 42 (2005), pp. 203–237.
   Web of Science ®Google Scholar
• Molimard, J, Le Riche, R, Vautrin, A, and Lee, JR, 2005. Identification of the four orthotropic plate stiffnesses using a single open-hole tensile test, Exp. Mech. 45 (2005), pp. 404–411.
   Web of Science ®Google Scholar
• Grediac, M, Pierron, F, Avril, S, and Toussaint, E, 2006. The virtual fields method for extracting constitutive parameters from full-field measurements: A review, Strain 42 (2006), pp. 233–253.
   Web of Science ®Google Scholar
• Avril, S, and Pierron, F, 2007. General framework for the identification of constitutive parameters from full-field measurements in linear elasticity, Int. J. Solids Struct. 44 (2007), pp. 4978–5002.
   Web of Science ®Google Scholar
• Song, SH, Paulino, GH, and Buttlar, WG, 2006. Simulation of crack propagation in asphalt concrete using an intrinsic cohesive zone model, J. Eng. Mech. 132 (2006), pp. 1215–1223.
   Web of Science ®Google Scholar
• Dick-Nielsen, L, Stang, H, and Poulsen, PN, 2006. "Condition for strain-hardening in ECC uniaxial test specimen". In: Konsta-Gdoutos, MS, ed. Measuring, Monitoring and Modeling Concrete Properties. Springer: Dordrecht; 2006. pp. 41–47.
   Google Scholar
• De Boor, C, 2001. A Practical Guide to Splines. New York: Springer; 2001.
   Google Scholar
• Deuflhard, P, and Hohmann, A, 2003. Numerical Analysis in Modern Scientific Computing: An Introduction. New York: Springer; 2003.
   Google Scholar
• Fletcher, R, 1987. Practical Methods of Optimization. Chichester; New York: Wiley; 1987.
   Google Scholar
• Nelder, JA, and Mead, R, 1965. Simplex method for function minimization, Comput. J. 7 (1965), pp. 308–313.
   Web of Science ®Google Scholar
• Nocedal, J, and Wright, SJ, 2006. Numerical Optimization. New York: Springer; 2006.
   Google Scholar
• Bezerra, LM, and Saigal, S, 1993. A boundary element formulation for the inverse elastostatics problem (IESP) of flaw detection, Int. J. Numer. Methods Eng. 36 (1993), pp. 2189–2202.
   Web of Science ®Google Scholar
• Lu, H, and Cary, PD, 2000. Deformation measurements by digital image correlation: Implementation of a second-order displacement gradient, Exp. Mech. 40 (2000), pp. 393–400.
   Web of Science ®Google Scholar
• Cheng, P, Sutton, MA, Schreier, HW, and McNeill, SR, 2002. Full-field speckle pattern image correlation with B-spline deformation function, Exp. Mech. 42 (2002), pp. 344–352.
   Web of Science ®Google Scholar