Assessment of elastic–plastic material parameters comparatively by three procedures based on indentation test and inverse analysis

References

• Oliver, WC, and Pharr, GM, 1992. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res. 7 (1992), pp. 1564–1583.
   Web of Science ®Google Scholar
• Oliver, WC, and Pharr, GM, 2004. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements of methodology, J. Mater. Res. 19 (2004), pp. 3–20.
   Web of Science ®Google Scholar
• Suresh, S, and Giannakopoulos, AE, 1998. New method for estimating residual stresses by instrumented sharp indentation, Acta Mater. 46 (1998), pp. 5755–5767.
   Web of Science ®Google Scholar
• Giannakopoulos, AE, and Suresh, S, 1999. Determination of elastoplastic properties by instrumented sharp indentation, Scr. Mater. 40 (1999), pp. 1191–1198.
   Web of Science ®Google Scholar
• Huber, N, and Tsakmakis, Ch, 1999. Determination of constitutive properties from spherical indentation data using neural networks, J. Mech. Phys. Solids 47 (1999), pp. 1569–1607.
   Web of Science ®Google Scholar
• Dao, N, Chollacoop, N, van Vliet, KJ, Venkatesh, TA, and Suresh, S, 2001. Computational modeling of the forward and reverse problem in instrumented indentation, Acta Mater. 49 (2001), pp. 3899–3918.
   Web of Science ®Google Scholar
• Capehart, TW, and Cheng, Y-T, 2003. Determining constitutive models from conical indentation: Sensitivity analysis, J. Mater. Res. 18 (2003), pp. 827–832.
   Web of Science ®Google Scholar
• Kucharski, S, and Mroz, Z, 2001. Identification of plastic hardening parameters of metals from spherical indentation tests, Mater. Sci. Eng. A 318 (2001), pp. 65–76.
   Web of Science ®Google Scholar
• Kucharski, S, and Mroz, Z, 2004. Identification of material parameters by means of compliance moduli in spherical indentation test, Mater. Sci. Eng. A 379 (2004), pp. 448–456.
   Web of Science ®Google Scholar
• Kucharski, S, and Mroz, Z, 2007. Identification of yield stress and plastic hardening parameters from a spherical indentation test, Int. J. Mech. Sci. 49 (2007), pp. 1238–1250.
   Web of Science ®Google Scholar
• Venkatesh, TA, van Vliet, KJ, Giannakopoulos, AE, and Suresh, S, 2008. Determination of elasto-plastic properties by instrumented sharp indentation: Guidelines for property extraction, Scr. Mater. 42 (2008), pp. 833–839.
   Google Scholar
• Nakamura, T, and Gu, Y, 2007. Identification of elastic–plastic anisotropic parameters using instrumented indentation and inverse analysis, Mech. Mater. 39 (2007), pp. 340–356.
   Web of Science ®Google Scholar
• Zhao, F, Huang, Y, and Hwan, KC, 2006. Determination of uniaxial residual stress and mechanical properties by instrumented indentation, Acta Mater. 54 (2006), pp. 2823–2832.
   Web of Science ®Google Scholar
• Bolzon, G, Maier, G, and Panico, M, 2004. Material model calibration by indentation, imprint mapping and inverse analysis, Int. J. Solids Struct. 41 (2004), pp. 2957–2975.
   Web of Science ®Google Scholar
• Bocciarelli, M, Bolzon, G, and Maier, G, 2005. Parameter identification in anisotropic elastoplasticity by indentation and imprint mapping, Mech. Mater. 37 (2005), pp. 855–868.
   Web of Science ®Google Scholar
• Bocciarelli, M, and Maier, G, 2007. Indentation and imprint mapping method for identification of residual stresses, Comput. Mater. Sci. 39 (2007), pp. 381–392.
   Web of Science ®Google Scholar
• Bolzon, G, and Buljak, V, , An indentation based technique to detect in-depth residual stress profiles induced by surface treatment of metal components, Fatigue Fract. Eng. Mater. Struct. 34 (2011), pp. 97–107.
   Google Scholar
• Bolzon, G, Bocciarelli, M, and Chiarullo, EJ, 2008. "Mechanical characterisation of materials by microindentation and AFM scanning". In: Bhushan, B, Fuchs, H, and Yamada, H, eds. Applied Scanning Probe Methods. Vol. 11–13. Berlin, Heidelberg: Springer-Verlag; 2008. pp. 85–120.
   Google Scholar
• Mulford, R, Asaro, RJ, and Sebring, RJ, 2004. Spherical indentation of ductile power law materials, J. Mater. Res. 19 (2004), pp. 2641–2649.
   Web of Science ®Google Scholar
• Lee, Y-H, Takashima, K, Higo, Y, and Kwon, D, 2004. Prediction of stress directionality from pile-up morphology around remnant indentation, Scr. Mater. 51 (2004), pp. 887–891.
   Web of Science ®Google Scholar
• Chen, X, Ogasawara, N, Zhao, M, and Chiba, N, 2007. On the uniqueness of measuring elastoplastic properties from indentation: The indistinguishable mystical materials, J. Mech. Phys. Solids 55 (2007), pp. 1618–1660.
   Web of Science ®Google Scholar
• Jang, JI, Choi, Y, Lee, JS, Lee, YH, Kwon, D, Gao, M, and Kania, R, 2005. Application of instrumented indentation technique for enhanced fitness-for-service assessment of pipeline crack, Int. J. Fract. 131 (2005), pp. 15–24.
   Web of Science ®Google Scholar
• Haykin, S, 1998. Neural Networks: A Comprehensive Foundation, . Englewood Cliffs, NJ: Prentice Hall; 1998.
   Google Scholar
• Waszczyszyn, Z, 1999. Neural Networks in the Analysis and Design of Structure. Wien, New York: Springer-Verlag; 1999.
   Google Scholar
• Stavroulakis, G, Bolzon, G, Waszczyszyn, Z, and Ziemianski, L, 2003. "Inverse analysis". In: Karihaloo, B, Ritchie, RO, and Milne, I, eds. Comprehensive Structural Integrity 3. Oxford, UK: Elsevier Science Ltd; 2003. pp. 685–718.
   Google Scholar
• Chatterjee, A, 2000. An introduction to the proper orthogonal decomposition, Curr. Sci. 78 (2000), pp. 808–817.
   Web of Science ®Google Scholar
• Ly, HV, and Tran, HT, 2001. Modeling and control of physical processes using proper orthogonal decomposition, Math. Comput. Model. 33 (2001), pp. 223–236.
   Web of Science ®Google Scholar
• Liang, YC, Lee, HP, Lim, SP, Lin, WZ, Lee, KH, and Wu, CG, 2002. Proper orthogonal decomposition and its applications: Part I – Theory, J. Sound Vib. 252 (2002), pp. 527–544.
   Web of Science ®Google Scholar
• Ostrowski, Z, Białecki, RA, and Kassab, AJ, 2005. Estimation of constant thermal conductivity by use of proper orthogonal decomposition, Comput. Mech. 37 (2005), pp. 52–59.
   Web of Science ®Google Scholar
• Ostrowski, Z, Białecki, RA, and Kassab, AJ, 2008. Solving inverse heat conduction problems using trained POD-RBF network, Inverse Probl. Sci. Eng. 16 (2008), pp. 705–714.
   Web of Science ®Google Scholar
• Buhmann, MD, 2003. Radial Basis Functions. Cambridge: Cambridge University Press; 2003.
   Google Scholar
• Coleman, TF, and Li, Y, 1996. An interior trust region approach for nonlinear minimization subject to bounds, SIAM J. Optim. 6 (1996), pp. 418–445.
   Web of Science ®Google Scholar
• Mata, M, and Alcala, J, 2004. The role of friction on sharp indentation, J. Mech. Phys. Solids 52 (2004), pp. 145–165.
   Web of Science ®Google Scholar
• ISO 6508-3:2005(E) Metallic Materials – Rockwell Hardness Test – Part 2: Verification and Calibration of Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T), ISO, Geneva, 2005.
   Google Scholar
• E18-07, ASTM, , Standard Test Method for Rockwell Hardness of Metallic Materials, ASTM, Philadelphia, 2007.
   Google Scholar
• Song, J, Low, S, and Zheng, A, 2009. Geometric Measurement Comparisons for Rockwell Diamond Indenters, Fundamental and Applied Metrology, 6–11 September 2009. Lisbon, Portugal: Proceedings of the XIX IMEKO World Congress; 2009. pp. 972–975.
   Google Scholar
• Lubliner, J, 1990. Plasticity Theory. New York: McMillan; 1990.
   Google Scholar
• Klisinski, M, Mroz, Z, and Runesson, K, 1992. Structure of constitutive equations in plasticity for different choices of state and control variables, Int. J. Plast. 8 (1992), pp. 221–243.
   Web of Science ®Google Scholar
• Mróz, Z, and Rodzik, P, 1995. On the control of deformation process by plastic strain, Int. J. Plast. 11 (1995), pp. 827–842.
   Web of Science ®Google Scholar
• Ma, D, Ong, CW, and Zhang, T, 2009. An instrumented indentation method for Young's modulus measurement with accuracy estimation, Exp. Mech. 49 (2009), pp. 719–729.
   Web of Science ®Google Scholar
• ABAQUS/Standard, release 6.5-1, Theory and User's Manuals, HKS Inc, Pawtucket, RI, USA, 2005.
   Google Scholar
• Seok, C-S, and Koo, J-M-, 2006. Evaluation of material degradation of 1Cr-1Mo-0.25V steel by ball indentation and resistivity, J. Mater. Sci. 41 (2006), pp. 1081–1087.
   Web of Science ®Google Scholar
• Kleiber, M, Antunez, H, Hien, TD, and Kowalczyk, P, 1997. Parameter Sensitivity in Non-linear Mechanics. Chichester: John Wiley; 1997.
   Google Scholar
• Bui, HD, 1993. Inverse Problems in the Mechanics of Materials: An Introduction. Boca Raton, FL: CRC Press; 1993.
   Google Scholar
• Mroz, Z, and Stavroulakis, G, , (eds.), Parameter Identification of Materials and Structures, Springer-Verlag, Berlin, 2004.
   Google Scholar
• Matlab User's Guide and Optimization Toolbox, release 6.13, The Math Works Inc., Natick, MA, USA, 2004.
   Google Scholar
• Qian, X, Cao, Y, and Lu, J, 2007. Dependence of the representative strain on the hardening functions of metallic materials in indentation, Scr. Mater. 57 (2007), pp. 57–60.
   Web of Science ®Google Scholar
• Jang, JI, Choi, Y, Lee, YH, and Kwon, D, 2005. Instrumented microindentation studies on long-term aged materials: Work-hardening exponent and yield ratio as new degradation indicators, Mater. Sci. Eng. A 395 (2005), pp. 295–300.
   Web of Science ®Google Scholar