References
- Cheng WL, Zhang WW, Chen H, et al. Spray cooling and flash evaporation cooling: the current development and application. Renew Sust Energ Rev. 2016;55:614–628. doi:10.1016/j.rser.2015.11.014.
- Somasundaram S, Tay AAO. Comparative study of intermittent spray cooling in single and two phase regimes. Int J Therm Sci. 2013;74(C):174–182. doi:10.1016/j.ijthermalsci.2013.06.008.
- Somasundaram S, Tay AAO. A study of intermittent liquid nitrogen sprays. Appl Therm Eng. 2014;69(1–2):199–207. doi:10.1016/j.applthermaleng.2013.11.066.
- Wang C, Song Y, Jiang P. Modelling of liquid nitrogen spray cooling in an electronic equipment cabin under low pressure. Appl Therm Eng. 2018;136:319–326. doi:10.1016/j.applthermaleng.2018.02.095.
- Liang G, Mudawar I. Review of spray cooling – Part 1: single-phase and nucleate boiling regimes, and critical heat flux. Int J Heat Mass Transf. 2017;115:1174–1205. doi:10.1016/j.ijheatmasstransfer.2017.06.029.
- Liang G, Mudawar I. Review of spray cooling – Part 2: high temperature boiling regimes and quenching applications. Int J Heat Mass Transf. 2017;115:1206–1222. doi:10.1016/j.ijheatmasstransfer.2017.06.022.
- Anderson M, Golliher E, Leimkuehler T, et al. Preliminary trade study of evaporative heat sinks. SAE Technical Paper 2006-01-2216, 2006. doi:10.4271/2006-01-2216.
- E.W. O’Connor, J.J. Zampiceni, N.F. Cerna and M.J. Fuller, “Orbiter Flash Evaporator: Flight Experience and Improvements”, SAE Technical Paper 972262, 1997. doi:10.4271/972262.
- Panão MRO, Correia AM, Moreira ALN. High-power electronics thermal management with intermittent multijet sprays. Appl Therm Eng. 2012;37(5):293–301. doi: 10.1016/j.applthermaleng.2011.11.031
- Panão MRO, Moreira ALN. Intermittent spray cooling: A new technology for controlling surface temperature. Int J Heat Fluid Flow. 2009;30(1):117–130. doi:10.1016/j.ijheatfluidflow.2008.10.005.
- Moreira ALN, Panão MRO. Heat transfer at multiple-intermittent impacts of a hollow cone spray. Int J Heat Mass Transf. 2006;49(21–22):4132–4151. doi:10.1016/j.ijheatmasstransfer.2006.04.004.
- Panão MRO, Moreira ALN. Thermo- and fluid dynamics characterization of spray cooling with pulsed sprays. Exp Therm Fluid Sci. 2005;30(2):79–96. doi:10.1016/j.expthermflusci.2005.03.020.
- Chen H-T, et al. Analytical solution of spray cooling characteristics on a hot surface using the Laplace transform. Inverse Probl Sci Eng. 2016;24(6):957–973. doi:10.1080/17415977.2015.1083990.
- Beck J, Woodbury K. Inverse engineering Handbook. Boca Raton (FL): CRC; 2002.
- Tunnell JW, Torres JH, Anvari B. Methodology for estimation of time-dependent surface heat flux due to Cryogen spray cooling. Ann Biomed Eng. 2002;30(1):19–33. doi: 10.1114/1.1432691
- Stolz JG. Numerical Solutions to an inverse problem of heat conduction for simple Shapes. J Heat Transfer. 1960;82(1):20–25. 10.1115/1.3679871.
- Somasundaram S, Tay AAO. A study of intermittent spray cooling process through application of a sequential function specification method. Inverse Probl Sci Eng. 2012;20(4):553–569. doi:10.1080/17415977.2011.639451.
- Zhou Z-F, Xu T-Y, Chen B. Algorithms for the estimation of transient surface heat flux during ultra-fast surface cooling. Int J Heat Mass Transf. 2016;100:1–10. doi:10.1016/j.ijheatmasstransfer.2016.04.058.
- Arpaci VS. Conduction heat transfer. Reading, MA: Addison-Wesley Publishing Co; 1966.
- Moffat RJ. Using uncertainty analysis in the Planning of an experiment. J Fluids Eng. 1985;107(2):173–178. doi:10.1115/1.3242452.
- Moffat RJ. Describing the uncertainties in experimental results. Exp Therm Fluid Sci. 1988;1(1):3–17. doi: 10.1016/0894-1777(88)90043-X
- Raynaud M, Beck JV. Methodology for comparison of inverse heat conduction methods. J Heat Transfer. 1988;110(1):30–37. doi:10.1115/1.3250468.