Polyvinyl chloride: chemical modification and investigation of structural and thermal properties

References

• Wang MH, He Y, Sen B. Research and management of plastic pollution in coastal environments of China. Environ. Pollut. 2019;248:898–905.
   PubMed Web of Science ®Google Scholar
• Karlsson TM, Arneborg L, Broström G, et al. The unaccountability case of plastic pellet pollution. Mar. Pollut. Bull. 2018;129:52–60.
   PubMed Web of Science ®Google Scholar
• Corcoran PL, Norris T, Ceccanese T, et al. Hidden plastics of Lake Ontario, Canada and their potential preservation in the sediment record. Environ. Pollut. 2015;204:17–25.
   PubMed Web of Science ®Google Scholar
• Krueger MC, Harms H, Schlosser D. Prospects for microbiological solutions to environmental pollution with plastics. Appl. Microbiol. Biotechnol. 2015;99:8857–8874.
   PubMed Web of Science ®Google Scholar
• Lin Z, Wang L, Jia Y, et al. A study on environmental bisphenol a pollution in plastics industry areas. Water Air Soil Pollut. 2017;228:98.
   Web of Science ®Google Scholar
• Grause G, Buekens A, Sakata Y, et al. Feedstock recycling of waste polymeric material. J. Mater. Cycles Waste Manag. 2011;13:265–282.
   Web of Science ®Google Scholar
• Kaminsky W, Predel M, Sadiki A. Feedstock recycling of polymers by pyrolysis in a fluidised bed. Polym. Degrad. Stab. 2004;85:1045–1050.
   Web of Science ®Google Scholar
• Jung SH, Cho MH, Kang BS, et al. Pyrolysis of a fraction of waste polypropylene and polyethylene for the recovery of BTX aromatics using a fluidized bed reactor. Fuel Process Technol. 2010;91:277–284.
   Web of Science ®Google Scholar
• Kodera Y, Ishihara Y, Kuroki T. Novel process for recycling waste plastics to fuel gas using a moving-bed reactor. Energy Fuels. 2005;20:155–158.
   Web of Science ®Google Scholar
• Vasile C, Brebu MA, Karayildirim T, et al. Feedstock recycling from plastic and thermoset fractions of used computers (I): pyrolysis. J. Mater. Cycles Waste Manag. 2006;8:99–108.
   Google Scholar
• Lee KH, Shin DH, Seo YH. Liquid-phase catalytic degradation of mixtures of waste high-density polyethylene and polystyrene over spent FCC catalyst. effect of mixing proportions of reactants. Polym. Degrad. Stab. 2004;84:123–127.
   Web of Science ®Google Scholar
• Vasile C, Pakdel H, Mihai B, et al. Thermal and catalytic decomposition of mixed plastics. J Anal Appl Pyrolysis. 2001;57:287–303.
   Web of Science ®Google Scholar
• Poerschmann J, Weiner B, Woszidlo S, et al. Hydrothermal carbonization of poly(vinyl chloride). Chemosphere. 2015;119:682–689.
   PubMed Web of Science ®Google Scholar
• Ari GA, Aydin I. Size-Dependent HCl generation of PVC/SiO2 micro- and nanocomposites. J. Macromol. Sci. Part B Phys. 2011;50:922–930.
   Web of Science ®Google Scholar
• Contreras J, Martínez G, Millán JL. Effect of hydrogenation and chlorination reactions on the β relaxation of poly(vinyl chloride). J. Macromol. Sci. Part B Phys. 2020;59:672–685.
   Web of Science ®Google Scholar
• Kameda T, Wachi S, GrauseG MT, et al. Dehydrochlorination of poly(vinyl chloride) with Ca(OH)2 in ethylene glycol and the effect of ball milling. J. Polym. Res. 2011;18:1687–1691.
   Web of Science ®Google Scholar
• Osry MA. Modern developments and design criteria for unmodified, modified and oriented PVC pipes. Plast. Rubber Compos. 2005;34:9–14.
   Web of Science ®Google Scholar
• Liu P, Zhao P, Guo J. Thermal stabilities of poly(vinyl chloride)/calcium Carbonate (PVC/CaCO3) composites. J. Macromol. Sci. Part B Phys. 2006;45:1135–1145.
   Web of Science ®Google Scholar
• Kalkan-Sevinc Z, Ling MTK. Blending optimization of Non-dioctyl phthalate plasticized poly(vinyl chloride) formulations. J. Macromol. Sci. Part B Phys. 2018;57:44–55.
   Web of Science ®Google Scholar
• Bagherinia MA, Sheydaei M, Giahi M. Graphene oxide as a compatibilizer for polyvinyl chloride/rice straw composites. J. Polym. Eng. 2017;37:661–670.
   Web of Science ®Google Scholar
• Mehdipour MR, Talebi S, Razavi Aghjeh MK. Effect of unplasticized poly vinyl chloride (UPVC) molecular weight and graft-acrylonitrile-butadiene-styrene (g-ABS) content on compatibility and izod impact strength of UPVC/g-ABS blends. J. Macromol. Sci. Part B Phys. 2017;56:644–654.
   Web of Science ®Google Scholar
• Hamidi N. Characterization of recovered polyvinylchloride by size exclusion chromatography and triple detectors technique. J. Macromol. Sci. Part B Phys. 2020;59:137–156.
   Web of Science ®Google Scholar
• Shi J, Yu Z, Chen B, et al. Preparation and mechanical properties of composites based on rigid Polyvinyl chloride filled with organic modified illite powder. J. Macromol. Sci. Part B Phys. 2015;54:507–516.
   Web of Science ®Google Scholar
• Liu X, Wu W, Qu H, et al. Flame-Retarding and Mechanical Properties of flexible Polyvinyl chloride with surface-treated lamellar magnesium hydroxide. J. Macromol. Sci. Part B Phys. 2016;55:115–127.
   Web of Science ®Google Scholar
• Kameda T, Yoshihara M, Grause G, et al. Chemical modification of poly(vinyl chloride) using sodium trisulfide. J. Polym. Res. 2015;22:88:1–5.
   Web of Science ®Google Scholar
• Sauerwein R. New mineral additive for heat stabilisation of PVC. Plast. Rubber Compos. 2008;37:453–458.
   Web of Science ®Google Scholar
• Osada F, Yana J. Deplasticization and dechlorination of flexible polyvinyl chloride in NaOH solution by microwave heating. J. Mater. Cycles Waste Manag. 2010;12:245–253.
   Web of Science ®Google Scholar
• Liu F, Li L, Yu S, et al. Methanolysis of polycarbonate catalysed by ionic liquid. J. Hazard. Mater. 2011;189:249–254.
   PubMed Web of Science ®Google Scholar
• Liu F, Cui X, Yu S, et al. Hydrolysis reaction of poly(ethylene terephthalate) using ionic liquids as solvent and catalyst. J. Appl. Polym. Sci. 2009;114:3561–3565.
   Web of Science ®Google Scholar
• Yoshioka T, Kameda T, Imai S, et al. Dechlorination of poly(vinyl chloride) using NaOH in ethylene glycol under atmospheric pressure. Polym. Degrad. Stab. 2008;93:1138–1141.
   Web of Science ®Google Scholar
• Endo K, Emori N. Dechlorination of poly(vinyl chloride) without anomalous units under high pressure and at high temperature in water. Polym. Degrad. Stab. 2001;74:113–117.
   Web of Science ®Google Scholar
• Sheydaei M, Jabari H, Ali-Asgari Dehaghi H. Synthesis and characterization of ethylene-xylene-based polysulfide block-copolymers using the interfacial polymerization method. J. Sulfur Chem. 2016;37:646–655.
   Web of Science ®Google Scholar
• Allahbakhsh A, Haghighi AH, Sheydaei M. Poly(ethylene trisulfide)/graphene oxide nanocomposites. J. Therm. Anal. Calorim. 2017;128:427–442.
   Web of Science ®Google Scholar
• Sheydaei M, Talebi S, Salami-Kalajahi M. Synthesis of ethylene dichloride-based polysulfide polymers: investigation of polymerization yield and effect of sulfur content on solubility and flexibility. J Sulfur Chem. 2021;42:67–82.
   Web of Science ®Google Scholar
• Sheydaei M, Edraki M, Javanbakht S, et al. Poly(butylene disulfide) and poly(butylene tetrasulfide): synthesis, cure and investigation of polymerization yield and effect of sulfur content on mechanical and thermophysical properties. Phosphorus Sulfur Silicon Relat. Elem. 2021: 1–7. DOI: https://doi.org/10.1080/10426507.2021.1872076.
   Google Scholar
• Mistry BD. A handbook of spectroscopic data chemistry. Jaipur: Oxford Book Company; 2009.
   Google Scholar
• Pandey M, Joshi GM, Mukherjee A, et al. Electrical properties and thermal degradation of poly(vinyl chloride)/polyvinylidene fluoride/ZnO polymer nanocomposites. Polym. Int. 2016;65:1098–1106.
   Web of Science ®Google Scholar
• Khalaj M, Allahbakhsh A, Bahramian AR, et al. Structural, mechanical and thermal behaviors of novolac/graphene oxidenanocomposite aerogels. J Non-Cryst Solids. 2017;460:19–28.
   Web of Science ®Google Scholar
• Gulmine JV, Janissek PR, Heise HM, et al. Polyethylene characterization by FTIR. Polym. Test. 2002;21:557–563.
   Web of Science ®Google Scholar
• Anyszka R, Kozanecki M, Czaderna A, et al. Inverse vulcanization of sulfur with vinylic POSS. J. Sulfur Chem. 2019;40:587–597.
   Web of Science ®Google Scholar
• Krishnaveni K, Subadevi R, Sivakumar M, et al. Synthesis and characterization of graphene oxide capped sulfur/polyacrylonitrile composite cathode by simple heat treatment. J. Sulfur Chem. 2019;40:377–388.
   Web of Science ®Google Scholar
• Sheydaei M, Alinia-Ahandani E. Synthesis and characterization of methylene-xylene-based polysulfide block-copolymer/carbon nanotube nanocomposites via in situ polymerization method. J. Sulfur Chem. 2020;41:421–434.
   Web of Science ®Google Scholar
• Sheydaei M, Kalaee MR, Allahbakhsh A, et al. Characterization of synthesized poly(aryldisulfide) through interfacial polymerization using phase-transfer catalyst. J. Sulfur Chem. 2012;33:303–311.
   Web of Science ®Google Scholar
• Sheydaei M, Kalaee MR, Allahbakhsh A, et al. Synthesis and characterization of poly(p-xylylene tetrasulfide) via interfacial polycondensation in the presence of phase transfer catalysts. Des. Monomers Polym. 2013;16:191–196.
   Web of Science ®Google Scholar
• Sin MC, Tan IKP, Annuar MSM, et al. Viscoelastic, spectroscopic, and microscopic characterization of novel bio-based plasticized poly(vinyl chloride) compound. Int. J. Polym. Sci. 2014;846189:1–10.
   Google Scholar
• Jia P, Hu L, Feng G, et al. PVC materials without migration obtained by chemical modification of azide-functionalized PVC and triethyl citrate plasticizer. Mater. Chem. Phys. 2017;190:25–30.
   Web of Science ®Google Scholar
• Sheydaei M, Allahbakhsh A, Haghighi AH, et al. Synthesis and characterization of poly(methylene disulfide) and poly(ethylene disulfide) polymers in the presence of a phase transfer catalyst. J. Sulfur Chem. 2014;35:67–73.
   Web of Science ®Google Scholar
• Argyropoulos DS, Hou Y, Ganesaratnam R, et al. Quantitative 1H NMR analysis of alkaline polysulfide solutions. Holzforschung. 2005;59:124–131.
   Web of Science ®Google Scholar
• Turhan Y, Do g˘an M, Alkan M. Characterization and some properties of poly(vinyl chloride)/sepiolite nanocomposites. Adv. Polym. Technol. 2013;32:E65–E82.
   Web of Science ®Google Scholar
• Yu J, Sun L, Ma C, et al. Thermal degradation of PVC: A review. Waste Manage. 2016;48:300–314.
   PubMed Web of Science ®Google Scholar
• Juijn JA, Gisolf JH, Jong WAD. Crystallinity in atactic poly(vinyl chloride). Kolloid-Z.u.Z.Polymere. 1973;251:456–473.
   Google Scholar
• Allahbakhsh A. PVC/rice straw/SDBS-modified graphene oxide sustainable nanocomposites: melt mixing process and electrical insulation characteristics. Compos Part A-Appl S. 2020;134:1–13.
   Web of Science ®Google Scholar
• Ali H, Silva C, Royer B, et al. Chemically modified Polyvinyl chloride for removal of thionine Dye (lauth’s violet). Materials (Basel). 2017;10:1–9.
   Web of Science ®Google Scholar
• Marongiu A, Faravelli T, Bozzano G, et al. Thermal degradation of poly (vinyl chloride). J Anal Appl Pyrolysis. 2003;70:519–553.
   Web of Science ®Google Scholar
• Liu FY, Zhou YL, Quan G, et al. Preparation of zinc hydroxystannate coated dendritic-fibrillar barium Carbonate and its flame retardant effect on soft poly(vinyl chloride). J. Macromol. Sci. Part B Phys. 2020;59:659–671.
   Web of Science ®Google Scholar
• McNeill IC, Memetea L, Cole WJ. A study of the products of PVC thermal degradation. Polym. Degrad. Stab. 1995;49:181–191.
   Web of Science ®Google Scholar
• Wang C, Liu H, Zhang J, et al. Thermal degradation of flame-retarded high-voltage cable sheath and insulation via TG-FTIR. J Anal Appl Pyrolysis. 2018;134:167–175.
   Web of Science ®Google Scholar
• Wang Z, Xie T, Ning X, et al. Thermal degradation kinetics study of polyvinyl chloride (PVC) sheath for new and aged cables. Waste Manage. 2019;99:146–153.
   PubMed Web of Science ®Google Scholar
• Yu J, Sun L, Ma C, et al. Thermal degradation of PVC: A review. Waste Manage. 2016;48:300–314.
   PubMed Web of Science ®Google Scholar
• Kariminejad B, Salami-Kalajahi M, Roghani-Mamaqani H. Thermophysical behaviour of matrix-grafted graphene/poly(ethylene tetrasulphide) nanocomposites. RSC Adv. 2015;5:100369–100377.
   Web of Science ®Google Scholar
• Allahbakhsh A, Sheydaei M, Mazinani S, et al. Enhanced thermal properties of poly(ethylene tetrasulfide) via expanded graphite incorporation by in situ polymerization method. High Perform. Polym. 2013;25:576–583.
   Web of Science ®Google Scholar
• Ramakrishnan L, Sivaprakasam K. Synthesis, characterization, thermal degradation, and comparative chain dynamics studies of weak-link polysulfide polymers. J. Polym. Res. 2009;16:623–635.
   Web of Science ®Google Scholar
• Sheydaei M, Edraki M, Alinia-Ahandani E, et al. Poly(p-xylene disulfide) and poly(p-xylene tetrasulfide): synthesis, cure and investigation of mechanical and thermophysical properties. J. Macromol. Sci. Part A Pure Appl. Chem. 2021;58:52–58.
   Web of Science ®Google Scholar
• Sheydaei M, Talebi S, Salami-Kalajahi M. Synthesis, characterization, curing, thermophysical and mechanical properties of ethylene dichloride-based polysulfide polymers. J. Macromol. Sci. Part A Pure Appl. Chem. 2020: 1–9. DOI: https://doi.org/10.1080/10601325.2020.1857267.
   Web of Science ®Google Scholar