Advanced search
Publication Cover
Advances in Applied Ceramics
Structural, Functional and Bioceramics
Volume 116, 2017 - Issue 4: Cement and Concrete Science
Journal homepage
2,305
Views
15
CrossRef citations to date
0
Altmetric
Original Articles

Comparison of calorimetric methods for the assessment of slag cement hydration

Rebecca A. SandersonImmobilisation Science Laboratory, Department of Materials Science and Engineering, The University of Sheffield, Sheffield, UKView further author information
,
Gavin M. CannNational Nuclear Laboratory, Workington Laboratory, Workington, Cumbria, UKView further author information
&
John L. ProvisImmobilisation Science Laboratory, Department of Materials Science and Engineering, The University of Sheffield, Sheffield, UKCorrespondence[email protected]
View further author information
Pages 186-192 | Received 16 Feb 2016, Accepted 15 Jan 2017, Published online: 15 Feb 2017

References

  • Nuclear Decommissioning Authority and Department of Energy & Climate Change. 2013 UK radioactive waste inventory: waste quantities from all sources. Prepared by Amec and Pöyry Energy. 2013.
  • Sharp JH, Hill J, Milestone NB, et al. Cementitious systems for encapsulation of intermediate level waste. The 9th International Conference on Radioactive Waste Management and Environmental Remediation; 21–25 September 2003; Oxford, England.
  • Cann GM, Carruthers K, McLuckie BH, et al. Scunthorpe GGBS/calumite blend assessment for use in ILW encapsulation processes. NNL. 2011;11306(11):9–10.
  • Nuclear Decommissioning Authority and Department of Energy & Climate Change. Radioactive wastes in the UK: a summary of the 2013 inventory. Prepared by Amec and Pöyry Energy. 2013.
  • The British Standards Institution. BS EN 196-8:2010, Method of testing cement, part 8: heat of hydration - solution method. London: BSI Standards Limited; 2010.
  • The British Standards Institution. BS EN 196-9:2010, Methods of testing cement, part 9: heat of hydration - semi-adiabatic method. London: BSI Standards Limited; 2010.
  • Poole TS. Revision of test methods and specifications for controlling heat of hydration in hydraulic cement. PCA R&D Serial No.3007. Illinois: Portland Cement Association; 2007.
  • The British Standards Institution. BS EN 197-1:2011, Cement, part 1: composition, specifications and conformity criteria for common cements. London: BSI Standards Limited; 2011.
  • European Committee for Standardization. PD CEN/TR 16632:2014, Isothermal conduction calorimetry (ICC) for the determination of heat of hydration of cement: state of art report and recommendations. London: BSI Standards Publication; 2014.
  • Wadsö L, Arndt M. An international round robin test on isothermal (conduction) calorimetry for measurement of three-day heat of hydration of cement. Cement Concrete Res. 2016;79:316–322. doi: 10.1016/j.cemconres.2015.10.004
  • Farris S, Miller E, Wright E, et al. Alternative BFS suppliers. RAT. 2004;4134:14–16.
  • The British Standards Institution. BS EN 14216:2015, Cement-Composition, specifications and conformity criteria for very low heat special cements. London: BSI Standards Publication; 2015.
  • Bullard JW, Jennings HM, Livingston RA, et al. Mechanisms of cement hydration. Cement Concrete Res. 2011;41(12):1208–1223. doi: 10.1016/j.cemconres.2010.09.011
  • Scrivener KL, Juilland P, Monteiro PJM. Advances in understanding hydration of Portland cement. Cement Concrete Res. 2015;78:38–56. doi: 10.1016/j.cemconres.2015.05.025
  • Jowsey J. Blast furnace slag for Sellafield encapsulation plants: technical specification. 2012.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.