Preparation of boron nitride-based coatings through thermal diffusion process

References

• Niedenzu K, Dawson JW. Boron-nitrogen compounds. New York (NY): Academic Press; 1965.
   Google Scholar
• Haubner R, Wilhelm M, Weissenbacher R, et al. Boron nitride – properties, synthesis and applications, In: Jansen M, editor. High performance non-oxide ceramics II. Berlin: Springer-Verlag, 2002. p. 1–45.
   Google Scholar
• Ooi N, Rairkar A, Lindsley L, et al. Electronic structure and bonding in hexagonal boron nitride. J Phys Condens Mater. 2006;18:97–115. doi: 10.1088/0953-8984/18/1/007
   Web of Science ®Google Scholar
• Huang JY, Zhu YT. Advances in the synthesis and characterization of boron nitride. Defect Diffusion Forum. 2000;186–187(1):1–32. doi: 10.4028/www.scientific.net/DDF.186-187.1
   Google Scholar
• Erdemir A. Boron-based solid nanolubricants and lubrication additives. In: Martin I, Ohmae N, editors. Nanolubricants. Chichester: John Wiley and Sons; 2008. p. 203–223.
   Google Scholar
• Shah FU, Glavatskin S, Antzutkin OA. Boron in tribology: from borates to ionic liquids. Tribol Lett 2013;51:281–301. doi: 10.1007/s11249-013-0181-3
   Web of Science ®Google Scholar
• Kumara Y, Wakabayashi T, Okada K, et al. Boron nitride as a lubricant additive. Wear. 1999;232:199–206. doi: 10.1016/S0043-1648(99)00146-5
   Web of Science ®Google Scholar
• Chong YM, Ye Q, Yang Y, et al. Tribological study of boron nitride films. Diam Relat Mater 2010;19:654–660. doi: 10.1016/j.diamond.2010.02.024
   Web of Science ®Google Scholar
• Erdemir A. Review of engineered tribological interfaces for improved boundary lubrication. Tribol Int. 2005;38(3):249–256. doi: 10.1016/j.triboint.2004.08.008
   Web of Science ®Google Scholar
• Greco A, Mistry K, Sista V, et al. Friction and wear behaviour of boron based surface treatment and nano-particle lubricant additives for wind turbine gearbox applications. Wear. 2011;271:1754–1760. doi: 10.1016/j.wear.2010.11.060
   Web of Science ®Google Scholar
• Murty KL, Charit I. An Introduction to nuclear materials. Fundamentals and applications. Berlin: Wiley-VCH; 2012.
   Google Scholar
• Nabakhtiani G, Chkhartishvili L, Gigineishvili A, et al. Attenuation of gamma-radiation concomitant neutron – absorption in boron-tungsten composite shields. Nano Stud. 2013;8:259–266.
   Google Scholar
• Paine RT, Narula CK. Synthetic routes to boron nitride. Chem Rev. 1990;90:73–91. doi: 10.1021/cr00099a004
   Web of Science ®Google Scholar
• Kalyoncu RS. BN powder synthesis at low temperatures. Ceram Eng Sci Proc. 1985;6(9-10):1356–1364. doi: 10.1002/9780470320297.ch18
   Google Scholar
• Pikalov SN. Mechanism of formation of graphite like boron nitride in the carbothermal process, powder. Metall Met Ceram. 1988;27:404–406.
   Web of Science ®Google Scholar
• Camurlu HE, Sevinc R, Topkaya Y. Effect of calcium carbonate addition on carbothermic formation of hexagonal boron nitride. J Eur Ceram Soc 2008;28:679–689. doi: 10.1016/j.jeurceramsoc.2007.07.002
   Web of Science ®Google Scholar
• Aydoglu A, Sevinc N. Carbothermic formation of boron nitride. J Eur Ceram Soc 2003;23:3153–3161. doi: 10.1016/S0955-2219(03)00092-X
   Web of Science ®Google Scholar
• Pierson HO. Boron nitride composites by chemical vapor deposition. J Compos Mater. 1975;9:228–240. doi: 10.1177/002199837500900302
   Web of Science ®Google Scholar
• Rosenberg A, Sinenko YA, Chukanov N. Regularities of pyrolytic boron nitride coating formation on a graphite matrix. J Mater Sci 1993;28:5528–5533. doi: 10.1007/BF00367825
   Web of Science ®Google Scholar
• Middleman S. The role of gas-phase reactions in boron nitride growth by chemical vapor deposition. Mater Sci Eng A. 1993;163:135–140. doi: 10.1016/0921-5093(93)90587-5
   Web of Science ®Google Scholar
• Zhi C, Bando Y, Tan C, et al. Effective precursor for high yield synthesis of pure BN nanotubes. Solid State Commun 2005;135:67–70. doi: 10.1016/j.ssc.2005.03.062
   Web of Science ®Google Scholar
• Nakamura K, Sasaki T. Boron nitride films prepared by MOCVD. J Solid State Chem. 2000;154:101–106. doi: 10.1006/jssc.2000.8818
   Web of Science ®Google Scholar
• Lee CH, Wang JS, Kayatsha VK, et al. Effective growth of boron nitride nanotubes by thermal chemical vapor deposition. Nanotechnol. 2008;19:455605. doi: 10.1088/0957-4484/19/45/455605
   PubMed Web of Science ®Google Scholar
• Shi Y, Hamsen C, Jia X, et al. Synthesis of few-layer hexagonal boron nitride thin film by chemical vapor deposition. Nano Lett. 2010;10:4134–4139. doi: 10.1021/nl1023707
   PubMed Web of Science ®Google Scholar
• Kim KK, Hsu A, Jia X, et al. Synthesis and characterization of hexagonal boron nitride film as a dielectric layer for graphene devices. ACS Nano. 2012;6:8583–8590. doi: 10.1021/nn301675f
   PubMed Web of Science ®Google Scholar
• Pakdel A, Zhi C, Bando Y, et al. Boron nitride nanosheet coatings with controllable water repellency. ACS Nano. 2011;5:6507–6515. doi: 10.1021/nn201838w
   PubMed Web of Science ®Google Scholar
• Song L, Ci L, Lu H, et al. Large scale growth and characterization of atomic hexagonal boron nitride layers. Nano Lett. 2010;10:3209–3215. doi: 10.1021/nl1022139
   PubMed Web of Science ®Google Scholar
• Liu Z, Gong Y, Zhou W, et al. Ultrathin high-temperature oxidation-resistant coatings of hexagonal boron nitride. Nat Commun. 2013;4:2541. doi: 10.1038/ncomms3541
   PubMed Web of Science ®Google Scholar
• Ahmad P, Khandaker MU, Amin YM, et al. Synthesis of highly crystalline multilayered boron nitride Microflakes. Sci Rep. 2016;6:21403. doi: 10.1038/srep21403
   PubMed Web of Science ®Google Scholar
• Li J-S, Zhang C-R, Li B, et al. Boron nitride coatings by chemical vapor deposition from borazine. Surf Coat Technol 2011;205:3736–3741. doi: 10.1016/j.surfcoat.2011.01.032
   Web of Science ®Google Scholar
• Huang J-L, Pan C-H, Lii D-F. Investigation of the BN films prepared by low pressure chemical vapor deposition. Surf Coat Technol. 1999;122:166–175. doi: 10.1016/S0257-8972(99)00306-0
   Web of Science ®Google Scholar
• Cheng Y, Yin X, Liu Y, et al. BN coatings prepared by low pressure chemical vapor deposition using boron trichloride-ammonia-argon mixture gases. Surf Coat Technol. 2010;204:2797–2802. doi: 10.1016/j.surfcoat.2010.02.046
   Web of Science ®Google Scholar
• Le Gallet S, Chollon G, Rebillat F, et al. Microstructural and microtextural investigations of boron nitride deposited from BCl3-NH3-H2 gas mixtures. J Eur Ceram Soc. 2004;24:33–44. doi: 10.1016/S0955-2219(03)00126-2
   Web of Science ®Google Scholar
• Lee WY, Lockey WJ, Agrawal PK. Kinetic analysis of chemical vapor deposition of boron nitride. J Am Ceram Soc. 1991;74(10):2642–2648. doi: 10.1111/j.1151-2916.1991.tb06813.x
   Web of Science ®Google Scholar
• Thomas J, Weston NE, O’Connor TE. Turbostratic boron nitride, thermal transformation to ordered-layer-lattice boron nitride. J Am Chem Soc. 1963;84:4649–4622.
   Web of Science ®Google Scholar
• Matsuda T, Uno N, Hacae H, et al. Synthesis and structure of chemically vapour-deposited boron nitride. J Mater Sci. 1986;21(2):649–658. doi: 10.1007/BF01145537
   Web of Science ®Google Scholar
• Arya SPS. Preparation, properties and applications of boron nitride thin films. Thin Solid Films. 1988;157(2):267–282. doi: 10.1016/0040-6090(88)90008-9
   Web of Science ®Google Scholar
• Schmolla W, Hartnagel HL. Amorphous BN films produced in a double-plasma reactor for semiconductor application. Solid-State Electron. 1983;26(10):931–939. doi: 10.1016/0038-1101(83)90069-2
   Web of Science ®Google Scholar
• Sugiama K, Itoh H. Chemical vapor deposition of turbostratic and hexagonal boron nitride. Mater Sci Forum. 1990;54-55:141. doi: 10.4028/www.scientific.net/MSF.54-55.141
   Google Scholar
• Mittemeijer EJ, Somers MAJ, editors. Thermochemical surface engineering of steels. Cambridge: Elsevier – Woodhead Publishing; 2014.
   Google Scholar
• Cox J. W. Wear and corrosion resistant coatings for non-cutting tool applications. In: Bunshah RF, editor. Handbook of hard coatings. Deposition technologies, properties and applications. Park Ridge (NJ): Noyes Publ; 2001. p. 411–465.
   Google Scholar
• Davis JR. Surface engineering for corrosion and wear resistance; ASM international and IOM communications. Materials Park (OH): Maney Publishing; 2001.
   Google Scholar
• Nicholls JR. Designing oxidation-resistant coatings. JOM. 2000;52:28–35. doi: 10.1007/s11837-000-0112-2
   Web of Science ®Google Scholar
• Choy KL. Chemical vapor deposition of coatings. Prog Mater Sci. 2003;48(2):57–170. doi: 10.1016/S0079-6425(01)00009-3
   Web of Science ®Google Scholar
• Dearnley PA, Bell T. Engineering the surface with boron based materials. Surf Eng. 1985;1 (3):203–217. doi: 10.1179/sur.1985.1.3.203
   Google Scholar
• Hunger H-J, Trute G. Boronizing to produce wear-resistant surface layers. Heat Treat Met. 1994;2:31–39.
   Google Scholar
• Taktak S. Tribological behaviour of borided bearing steels at elevated temperatures. Surf Coat Technol. 2006;201:2230–2239. doi: 10.1016/j.surfcoat.2006.03.032
   Web of Science ®Google Scholar
• Lubas J. Practical application of boron-modified sliding pairs in I.C. engine. Tribol Int. 2010;43(11):2046–2050. doi: 10.1016/j.triboint.2010.05.008
   Web of Science ®Google Scholar
• Petrova RS, Suwattananant N, Pallegar KK, et al. Boron coating to combat corrosion and oxidation. Corros Rev. 2007;25(5-6):82–569. doi: 10.1515/CORRREV.2007.25.5-6.555
   Web of Science ®Google Scholar
• Medvedovski E, Chinski FA, Stewart J. Wear- and corrosion-resistant boride-based coatings obtained through thermal diffusion CVD processing. Adv Eng Mater. 2014;16(6):713–728. doi: 10.1002/adem.201400090
   Web of Science ®Google Scholar
• Medvedovski E. Formation of corrosion-resistant thermal diffusion boride coatings. Adv Eng Mater. 2016;18(1):11–33. doi: 10.1002/adem.201500102
   Web of Science ®Google Scholar
• Medvedovski E, Jiang J, Robertson M. Tribological properties of boride based thermal diffusion coatings. Adv Appl Ceram. 2014;113(7):427–437. doi: 10.1179/1743676114Y.0000000175
   Web of Science ®Google Scholar
• Medvedovski E, Jiang J, Robertson M. Boride-based coatings for protection of cast irons against wear. Adv Appl Ceram. 2016;115(8):483–494. doi: 10.1080/17436753.2016.1195527
   Web of Science ®Google Scholar
• Huang PC, Wong MS. Nanostructures of mixed-phase boron nitride via biased microwaved plasma-assisted CVD. Vacuum. 2014;100:66–70. doi: 10.1016/j.vacuum.2013.07.042
   Web of Science ®Google Scholar
• Nakamura K. Preparation and properties of amorphous boron nitride films by molecular flow chemical vapor deposition. J Electrochem Soc Solid-State Sci Technol. 1985;132(7):1757–1762.
   Google Scholar
• API 5B. Specification for Threading, Gauging and Thread Inspection of Casing, Tubing and Line Pipe Threads; 2008.
   Google Scholar
• Erdemir A. Tribological properties of boric acid and boric-acid-forming surfaces. I. Crystal chemistry and mechanism of self-lubrication of boric acid. Lubr Eng. 1991;47:168–172.
   Google Scholar
• Erdemir A, Bindal C, Zuiker C, et al. Tribology of naturally-occurring boric acid films on boron carbide. Surf Coat Technol. 1996;86-87:507–510. doi: 10.1016/S0257-8972(96)02984-2
   Web of Science ®Google Scholar
• Hutchings IM. Tribology. Friction and wear of engineering materials. London: Butterworth-Heinemann; 1992.
   Google Scholar
• Budinski KG. Surface engineering for wear resistance. Englewood Cliffs (NJ): Prentice-Hall Inc; 1988.
   Google Scholar
• Takadoum J. Materials and surface engineering in tribology. London: ISTE – John Wiley & Sons; 2008.
   Google Scholar
• Holmberg K, Matthews A, Ronkainen H. Coating tribology – contact mechanisms and surface design. Tribol Int. 1998;31(1–3):107–120. doi: 10.1016/S0301-679X(98)00013-9
   Web of Science ®Google Scholar