References
- Tidehag P, Shen Z. Digital dentistry calls the change of ceramics and ceramic processes. Adv Appl Ceram. 2019;118(1–2):83–90. doi: 10.1080/17436753.2018.1511337
- Han J, Zhao J, Shen Z. Zirconia ceramics in metal-free implant dentistry. Adv Appl Ceram. 2017;116(3):138–150. doi: 10.1080/17436753.2016.1264537
- Zhang Y, Han J-M, Zheng G, et al. Fatigue behaviours of the zirconia dental restorations prepared by two manufacturing methods. Adv Appl Ceram. 2017;116(7):368–375. doi: 10.1080/17436753.2017.1336365
- El-Wardany T, Barth R, Holowczak J, et al. Optimum process parameters to produce green ceramic complex parts. CIRP Ann-Manuf Techn. 2009;58(1):109–112. doi: 10.1016/j.cirp.2009.03.105
- Janssen R, Scheppokat S, Claussen N. Tailor-made ceramic-based components – advantages by reactive processing and advanced shaping techniques. J Eur Ceram Soc. 2008;28(7):1369–1379. doi: 10.1016/j.jeurceramsoc.2007.12.022
- Belli R, Wendler M, de Ligny D, et al. Chairside CAD/CAM materials. part 1: measurement of elastic constants and microstructural characterization. Dent Mater. 2017;33(1):84–98. doi: 10.1016/j.dental.2016.10.009
- Conrad HJ, Seong W-J, Pesun IJ. Current ceramic materials and systems with clinical recommendations: a systematic review. J Prosthet Dent. 2007;98(5):389–404. doi: 10.1016/S0022-3913(07)60124-3
- Ha SJ, Shin BC, Cho MW, et al. High speed end-milling characteristics of pre-sintered Al2O 3/Y-TZP ceramic composites for dental applications. J Ceram Soc Jpn. 2010;118(1383):1053–1056. doi: 10.2109/jcersj2.118.1053
- Margarido A, Purquerio BM, Foschini CR, et al. Influence of the green-machining parameters on the mechanical properties of alumina rods. Int J Adv Manuf Tech. 2017;88(9):3475–3484. doi: 10.1007/s00170-016-9081-7
- Demarbaix A, Rivière-Lorphèvre E, Ducobu F, et al. Behaviour of pre-sintered Y-TZP during machining operations: determination of recommended cutting parameters. J Manuf Process. 2018;32:85–92. doi: 10.1016/j.jmapro.2018.01.020
- Bukvic G, Sanchez LEDA, Fortulan CA, et al. Green machining oriented to diminish density gradient for minimization of distortion in advanced ceramics. Mach Sci Technol. 2012;16(2):228–246. doi: 10.1080/10910344.2012.673968
- Holthaus MG, Twardy S, Stolle J, et al. Micromachining of ceramic surfaces: hydroxyapatite and zirconia. J Mater Process Technol. 2012;212(3):614–624. doi: 10.1016/j.jmatprotec.2011.06.007
- Kunii J, Hotta Y, Tamaki Y, et al. Effect of sintering on the marginal and internal fit of CAD/CAM-fabricated zirconia frameworks. Dent Mater J. 2007;26(6):820–826. doi: 10.4012/dmj.26.820
- Beuer F, Schweiger J, Edelhoff D. Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. Br Dent J. 2008;204(9):505–511. doi: 10.1038/sj.bdj.2008.350
- Case ED, Ren F, Kwon P, et al. Machining and ceramic/ceramic Joining to form internal mesoscale channels. Int J Appl Ceram Technol. 2004;1(1):95–103. doi: 10.1111/j.1744-7402.2004.tb00159.x
- Shin HW, Case ED, Kwon P, et al. Machining and joining to form internal MESO-scale channels in ceramic oxides. 27th Annual Cocoa Beach Conference on Advanced Ceramics and Composites: B: Ceramic Engineering and Science Proceedings. 2003: 573–582.
- Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater. 2008;24(3):299–307. doi: 10.1016/j.dental.2007.05.007
- Dadhich P, Srivas PK, Mohanty S, et al. Microfabrication of green ceramics: contact vs. non-contact machining. J Eur Ceram Soc. 2015;35(14):3909–3916. doi: 10.1016/j.jeurceramsoc.2015.06.025
- Nunn SD, Kirby GH. Green machining of gelcast ceramic materials, April 1, 1996; Tennessee. (digital.library.unt.edu/ark:/67531/metadc666726/: accessed May 10, 2017), University of North Texas Libraries, Digital Library, digital.library.unt.edu; crediting UNT Libraries Government Documents Department. (1996).
- Desfontaines M, Jorand Y, Gonon M, et al. Characterisation of the green machinability of AlN powder compacts. J Eur Ceram Soc. 2005;25(6):781–791. doi: 10.1016/j.jeurceramsoc.2004.03.006
- He R, Zhang R, Zhu X, et al. Improved green strength and green machinability of ZrB2–SiC through gelcasting based on a double gel network. J Am Ceram Soc. 2014;97(8):2401–2404. doi: 10.1111/jace.13076
- Bukvic G, Fiocchi A, Sanchez L, et al. Influence of ceramic binders on mechanical properties and finishing of green machined alumina, 22nd International Congress of Mechanical Engineering (COBEM 2013), 2013.
- Ng SH, Hull JB, Henshall JL. Machining of novel alumina/cyanoacrylate green ceramic compacts. J Mater Process Technol. 2006;175(1–3):299–305. doi: 10.1016/j.jmatprotec.2005.04.055
- Kamboj RK, Dhara S, Bhargava P. Machining behaviour of green gelcast ceramics. J Eur Ceram Soc. 2003;23(7):1005–1011. doi: 10.1016/S0955-2219(02)00265-0
- Su B, Dhara S, Wang L. Green ceramic machining: a top-down approach for the rapid fabrication of complex-shaped ceramics. J Eur Ceram Soc. 2008;28(11):2109–2115. doi: 10.1016/j.jeurceramsoc.2008.02.023
- Mohanty S, Rameshbabu AP, Mandal S, et al. Critical issues in near net shape forming via green machining of ceramics: a case study of alumina dental crown. J Asian Ceram Soc. 2013;1(3):274–281. doi: 10.1016/j.jascer.2013.06.005
- Dhara S, Su B. Green machining to net shape alumina ceramics prepared using different processing routes. Int J Appl Ceram Technol. 2005;2(3):262–270. doi: 10.1111/j.1744-7402.2005.02021.x
- Birkby I, Dransfield GP, McColgan P, et al. Factors affecting the machinability of fine ceramic powder compacts. Br Ceram Trans. 1994;93(5):183–186.
- Song JH, Evans JRG. On the machinability of ceramic compacts. J Eur Ceram Soc. 1997;17(14):1665–1673. doi: 10.1016/S0955-2219(97)00041-1
- Bera O, Trunec M. Optimization of fine alumina gelcasting using in situ dynamic rheology. J Am Ceram Soc. 2012;95(9):2849–2856. doi: 10.1111/j.1551-2916.2012.05293.x
- ISO EN 4287:1997. Geometrical product specifications (GPS) – surface texture: profile method – terms, definitions and surface texture parameters. Geneva: International Organisation for Standardization; 1998.
- ISO EN.4288: 1998. Geometric product specifications (GPS) – surface texture: profile method – rules and procedures for the assessment of surface texture. Geneva: International Organisation for Standardization; 1998.
- Gwyddion software (GNU GPL license), version 2.49, http://gwyddion.net/.
- ISO 6507-1:2005. Metallic materials – Vickers hardness test – part 1: test method. Geneva: International Organisation for Standardization; 2005.
- Dlouhy I, Holzmann M, Man J, et al. The use of chevron notched specimen for fracture toughness determination, 1994.
- Börger A, Supancic P, Danzer R. The ball on three balls test for strength testing of brittle discs: stress distribution in the disc. J Eur Ceram Soc. 2002;22(9):1425–1436. doi: 10.1016/S0955-2219(01)00458-7
- ENV 843-5:1995. Advanced technical ceramics – monolithic ceramics – mechanical tests at room temperature – part 5: statistical analysis. Brussels: CEN; 1996.
- Lan T-H, Wang C-H, Chen K-K, et al. Milling properties of low temperature sintered zirconia blocks for dental use. Mat Sci Eng C. 2017;73:692–699. doi: 10.1016/j.msec.2016.12.089
- Alao A-R, Stoll R, Song X-F, et al. Surface quality of yttria-stabilized tetragonal zirconia polycrystal in CAD/CAM milling, sintering, polishing and sandblasting processes. J Mech Behav Biomed Mater. 2017;65:102–116. doi: 10.1016/j.jmbbm.2016.08.021
- Zhang Y, Lawn BR, Rekow ED, et al. Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B. 2004;71B(2):381–386. doi: 10.1002/jbm.b.30097
- Zhang Y, Lawn BR. Fatigue sensitivity of Y-TZP to microscale sharp-contact flaws. J Biomed Mater Res B. 2005;72B(2):388–392. doi: 10.1002/jbm.b.30174
- Hjerppe J, Närhi TO, Vallittu PK, et al. Surface roughness and the flexural and bend strength of zirconia after different surface treatments. J Prosthet Dent. 2016;116(4):577–583. doi: 10.1016/j.prosdent.2016.02.018