References
- Guo J, Guo H, Baker AL, et al. Cold sintering: A Paradigm Shift for processing and integration of ceramics. Angew Chemie – Int Ed. 2016;55:11457–11461. doi:10.1002/anie.201605443.
- Randall CA, Guo J, Baker A, et al. Cold sintering ceramics and composites, US20170088471A1, 2017.
- Maria J, Kang X, Floyd RD, et al. Cold sintering: current status and prospects. J Mater Res. 2017;32:3205–3218. doi:10.1557/jmr.2017.262.
- Guo J, Berbano SS, Guo H, et al. Cold sintering process of composites: bridging the processing temperature gap of ceramic and polymer materials. Adv Funct Mater. 2016;26:7115–7121. doi:10.1002/adfm.201602489.
- Funahashi S, Guo H, Guo J, et al. Cold sintering and co-firing of a multilayer device with thermoelectric materials. J Am Ceram Soc. 2017;100:3488–3496. doi:10.1111/jace.14852.
- Funahashi S, Guo J, Guo H, et al. Demonstration of the cold sintering process study for the densification and grain growth of ZnO ceramics. J Am Ceram Soc. 2017;100:546–553. doi:10.1111/jace.14617.
- Gonzalez-Julian J, Neuhaus K, Bernemann M, et al. Unveiling the mechanisms of cold sintering of ZnO at 250°C by varying applied stress and characterizing grain boundaries by Kelvin probe force microscopy. Acta Mater. 2018;144:116–128. doi:10.1016/j.actamat.2017.10.055.
- Liu JA, Li CH, Shan JJ, et al. Preparation of high-density InGaZnO4target by the assistance of cold sintering. Mater Sci Semicond Process. 2018;84:17–23. doi:10.1016/j.mssp.2018.04.030.
- Jing Y, Luo N, Wu S, et al. Remarkably improved electrical conductivity of ZnO ceramics by cold sintering and post-heat-treatment. Ceram Int. 2018;44:20570–20574. doi:10.1016/j.ceramint.2018.07.192.
- Medri V, Servadei F, Bendoni R, et al. Journal of the European ceramic society nano-to-macroporous TiO2 (anatase) by cold sintering process. J Eur Ceram Soc. 2019;39:2453–2462. doi:10.1016/j.jeurceramsoc.2019.02.047.
- Bouville F, Studart AR. Geologically-inspired strong bulk ceramics made with water at room temperature. Nat Commun. 2017;8; doi:10.1038/ncomms14655.
- Leng H, Huang J, Nie J, et al. Cold sintering and ionic conductivities of Na3.256Mg0.128Zr1.872Si2PO12solid electrolytes. J Power Sources. 2018;391:170–179. doi:10.1016/j.jpowsour.2018.04.067.
- Charoonsuk T, Sukkha U, Kolodiazhnyi T, et al. Enhancing the densification of ceria ceramic at low temperature via the cold sintering assisted two-step sintering process. Ceram Int. 2018;44:S54–S57. doi:10.1016/j.ceramint.2018.08.253.
- Guo H, Guo J, Baker A, et al. Hydrothermal-Assisted cold sintering process: a new guidance for low-temperature ceramic sintering. ACS Appl Mater Interfaces. 2016;8:20909–20915. doi:10.1021/acsami.6b07481.
- Wang D, Guo H, Morandi CS, et al. Cold sintering and electrical characterization of lead zirconate titanate piezoelectric ceramics. APL Mater. 2018;6:16101. doi:10.1063/1.5004420.
- Ma JP, Chen XM, Ouyang WQ, et al. Microstructure, dielectric, and energy storage properties of BaTiO3ceramics prepared via cold sintering. Ceram Int. 2018;44:4436–4441. doi:10.1016/j.ceramint.2017.12.044.
- Ndayishimiye A, Largeteau A, Prakasam M, et al. Low temperature hydrothermal sintering process for the quasi-complete densification of nanometric α -quartz. Scr Mater. 2018;145:118–121. doi:10.1016/j.scriptamat.2017.10.023.
- Guo H, Baker A, Guo J, et al. Cold sintering process: a novel technique for Low-temperature ceramic processing of ferroelectrics. J Am Ceram Soc. 2016;99:3489–3507. doi:10.1111/jace.14554.
- Seo JH, Guo J, Guo H, et al. Cold sintering of a Li-ion cathode: LiFePO4-composite with high volumetric capacity. Ceram Int. 2017;43:15370–15374. doi:10.1016/j.ceramint.2017.08.077.
- Berbano SS, Guo J, Guo H, et al. Cold sintering process of Li1.5Al0.5Ge1.5(PO4)3 solid electrolyte. J Am Ceram Soc. 2017;100:2123–2135. doi:10.1111/jace.14727.
- Liu Y, Sun Q, Wang D, et al. Development of the cold sintering process and its application in solid-state lithium batteries. J Power Sources. 2018;393:193–203. doi:10.1016/j.jpowsour.2018.05.015.
- Ndayishimiye A, Buf S, Dourges M, et al. Scripta materialia design of 0–3 type nanocomposites using hydrothermal sintering. Scr Mater. 2018;148:15–19. doi:10.1016/j.scriptamat.2018.01.013.
- Induja IJ, Sebastian MT. Microwave dielectric properties of mineral sillimanite obtained by conventional and cold sintering process. J Eur Ceram Soc. 2017;37:2143–2147. doi:10.1016/j.jeurceramsoc.2017.01.007.
- Induja IJ, Sebastian MT. Microwave dielectric properties of cold sintered Al2O3–NaCl composite. Mater Lett. 2018;211:55–57. doi:10.1016/j.matlet.2017.09.083.
- Bin Hong W, Li L, Cao M. Plastic deformation and effects of water in room-temperature cold sintering of NaCl microwave dielectric ceramics. J Am Ceramic Soc. 2018;101:4038–4043. doi:10.1111/jace.15572.
- Taveri G, Grasso S, Gucci F, et al. Bio-inspired Hydro-pressure consolidation of silica. Adv Funct Mater. 2018;1805794:1–8.
- Guo H, Guo J, Baker A, et al. Cold sintering process for ZrO2-based ceramics: significantly enhanced densification evolution in yttria-doped ZrO2. J Am Ceram Soc. 2017;100:491–495. doi:10.1111/jace.14593.
- Jiang A, Ke D, Xu L, et al. Cold hydrostatic sintering: from shaping to 3D printing. J Mater. 2019;5:496–501. IN PRESS.
- Rahaman MN. Ceramic processing and sintering. New York (NY): Marcel Dekker; 1996.
- Chiang Y-M, Birnie D, Kingery PWD. Physical ceramics: principles for ceramic science and engineering. New York, USA: Wiley; 1997.
- Millero J. The apparent and partial molal volume of aqueous sodium chloride solutions at various temperatures. J Phys Chem. 1970;74:356–362. doi: 10.1021/j100697a022
- Trevani LN, Balodis EC, Tremaine PR. Apparent and standard partial molar volumes of NaCl, NaOH, and HCl in water and heavy water at T = 523 and 573 K at p = 14 MPa. J Phys Chem B 2007;111:2015–2024. doi:10.1021/jp063824x.
- Willey JD. The effect of pressure on the solubility of minerals in Seawater at 0°C. Mar Chem 1974;2:239–250. doi: 10.1016/0304-4203(74)90018-8
- Sawamura S, Egoshi N, Setoguchi Y, et al. Solubility of sodium chloride in water under high pressure. Fluid Phase Equilib. 2007;254:158–162. doi:10.1016/j.fluid.2007.03.003.
- Cambon O, Haines J. Hydrothermal Crystal growth of piezoelectric α-quartz phase of AO2 (A = Ge, Si) and MXO4 (M = Al, Ga, Fe and P = P, As): A Historical Overview. Crystals (Basel). 2017;7:38 doi:10.3390/cryst7020038.
- Byrappa K, Yoshimura M. 1 Hydrothermal technology – principles and applications. Handb Hydrothermal Technol. 2001: 1–49.
- Byrappa K, Yoshimura M. Physical chemistry of hydrothermal growth of crystals. Handb Hydrothermal Technol. 2013: 139–175. doi:10.1016/B978-0-12-375090-7.00004-9.
- Byrappa K, Yoshimura M. History of hydrothermal technology. Handb Hydrothermal Technol. 2013: 51–73. doi:10.1016/C2009-0-20354-0 doi: 10.1016/B978-0-12-375090-7.00002-5
- Kwon O-H, Messing GL. A theoretical analysis of solution-precipitation controlled densification during liquid phase sintering. Acta Metall. 1991;39:2059–2068. doi: 10.1016/0956-7151(91)90176-2
- Kingery WD. Densification during sintering in the presence of a liquid phase. I. Theory. J Appl Phys. 1959;30:301–306. doi:10.1063/1.1735155.
- Kingery WD, Woulbroun JM, Charvat FR. Effects of applied pressure on densification during sintering in the presence of a liquid phase. J Am Ceram Soc. 1963;46:391–395. doi: 10.1111/j.1151-2916.1963.tb11758.x
- Colombani J. Measurement of the pure dissolution rate constant of a mineral in water. Geochim Cosmochim Acta. 2008;72:5634–5640. doi:10.1016/j.gca.2008.09.007.
- Frost P, Werner F, Delgado A. The viscosity of water at high pressures – especially at subzero degrees centigrade. Rheol Acta. 2000;39:566–573. doi:10.1007/s003970000114.
- Traskine V, Skvortsova Z, Muralev A. Intergranular pressure solution in internally wetted polycrystals : effect of additives. Mater Sci Eng A. 2008;495:132–137. doi:10.1016/j.msea.2007.09.088.
- Urai JL, Kukla Z, Schléder CJ, et al. Flow and transport properties of salt rocks, 2008. http://www.ged.rwth-aachen.de/files/publications/publication_660.pdf.
- Schenk O, Urai JL. Microstructural evolution and grain boundary structure during static recrystallization in synthetic polycrystals of sodium chloride containing saturated brine. Contrib Mineral Petrol. 2004;146:671–682. doi:10.1007/s00410-003-0522-6.
- Hosoi K, Kawai S, Yanagisawa K, et al. Densification process for spherical glass powders with the same particle size by hydrothermal hot pressing. J Mater Sci. 1991;26:6448–6452. doi:10.1007/BF02387828.
- Doremus RH. Glass Science, II, 1994.
- Li W, Olevsky EA, Mckittrick J, et al. Densification mechanisms of spark plasma sintering : multi-step pressure dilatometry. J Mater Sci. 2012;47:7036–7046. doi:10.1007/s10853-012-6515-y.
- Giuntini D, Olevsky EA. Sintering stress of nonlinear viscous materials. J Am Ceram Soc. 2016;99:3520–3524. doi:10.1111/jace.14550.