References
- Behr M, Zeman F, Baitinger T, et al. The clinical performance of porcelain-fused-to-metal precious alloy single crowns: chipping, recurrent caries, periodontitis, and loss of retention. Int J Prosthodont. 2014;27(2):153–160. doi: 10.11607/ijp.3440
- Sailer I, Makarov NA, Thoma DS, et al. All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part I: single crowns (SCs). Dent Mater. 2015;31(6):603–623. doi: 10.1016/j.dental.2015.02.011
- Pjetursson BE, Sailer I, Makarov NA, et al. Corrigendum to “All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part II: Multiple-unit FDPs” [dental Materials 31 (6) (2015) 624–639]. Dent Mater. 2017.
- Rousson V, Heintze SD. Survival of zirconia- and metal-supported fixed dental prostheses: a systematic review. Int J Prosthodontics. 2010;23(6):493–502.
- Kimmich M, Stappert CFJ. Intraoral treatment of veneering porcelain chipping of fixed dental restorations: a review and clinical application. J Am Dental Assoc. 2013;144(1):31–44. doi: 10.14219/jada.archive.2013.0011
- Alsarani M, De Souza G, Rizkalla A, et al. Influence of crown design and material on chipping-resistance of all-ceramic molar crowns: an in vitro study. Dental Med Problems. 2018;55:35–42. doi: 10.17219/dmp/85000
- Anusavice KJ, Zhang NZ. Chemical durability of Dicor and fluorocanasite-based glass-ceramics. J Dent Res. 1998;77:1553–1559. doi: 10.1177/00220345980770071101
- Burke FJ, Grey NJ. Repair of fractured porcelain units: alternative approaches. Br Dent J. 1994;176:251–256. doi: 10.1038/sj.bdj.4808428
- Farah JW, Craig RG. Distribution of stresses in porcelain-fused-to-metal and porcelain jacket crowns. J Dent Res. 1975;54:255–261. doi: 10.1177/00220345750540010101
- Ban S, Anusavice KJ. Influence of test method on failure stress of brittle dental materials. J Dent Res. 1990;69:1791–1799. doi: 10.1177/00220345900690120201
- Liu Y, Wang Y, Wang D, et al. Self-glazed zirconia reducing the wear to tooth enamel. J Eur Ceram Soc. 2016;36(12):2889–2894. doi: 10.1016/j.jeurceramsoc.2015.11.029
- Ren W, Du F, Shen Z, et al. The workflows of a novel self-glazed zirconia for dental prostheses fabrication: case reports. Adv Appl Ceram. 2018;117(7):406–413. doi: 10.1080/17436753.2018.1462297
- Baroudi K, Ibraheem SN. Assessment of chair-side computer-aided design and computer-aided manufacturing restorations: a review of the literature. J Int Oral Health Jioh. 2015;7(4):96–104.
- Rueda AO, Anglada M, Jimenezpique E. Contact fatigue of veneer feldspathic porcelain on dental zirconia. Dent Mater. 2015;31(3):217–224. doi: 10.1016/j.dental.2014.12.006
- Örtorp A, Kihl ML, Carlsson GE. A 5-year retrospective study of survival of zirconia single crowns fitted in a private clinical setting. J Dent. 2012;40(6):527–530. doi: 10.1016/j.jdent.2012.02.011
- Daou EE. The zirconia ceramic: strengths and weaknesses. Open Dent J. 2014;8(8):33–42. doi: 10.2174/1874210601408010033
- Anusavice KJ. Standardizing failure, success, and survival decisions in clinical studies of ceramic and metal-ceramic fixed dental prostheses. Dent Mater. 2012;28(1):102–111. doi: 10.1016/j.dental.2011.09.012
- Manhart J, Frasheri I. Intraoral repair of a glass-ceramic restoration with nanohybrid ormocers: a case report. Compend Continuing Educ Dent (Jamesburg, NJ: 1995). 2016;37:700–709.
- Nuran Y. The repair methods for fractured metal-porcelain restorations: a review of the literature. Eur J Prosthodontics Restor Dent. 2004;12(4):161.
- Raposo LHA, Neiva NA, Silva GRD, et al. Ceramic restoration repair: report of two cases. J Appl Oral Sci. 2009;17:140–144. doi: 10.1590/S1678-77572009000200013
- Shi A, Wu Z, Huang J, et al. Wear performance of self-glazed zirconia crowns with different amount of occlusal adjustment after 6 months of clinical use. Adv Appl Ceram. 2018;117(8):445–451. DOI:10.1080/17436753.2018.1477567.
- Ji B, Alrayes AA, Zhao J, et al. Grinding and polishing efficiency of a novel self-glazed zirconia versus the conventional dry-pressed and sintered zirconia ceramics. Adv Appl Ceram. 2018;118(1–2):46–55. DOI:10.1080/17436753.2018.1472904.
- Özcan M, Niedermeier W. Clinical study on the reasons for and location of failures of metal-ceramic restorations and survival of repairs. Int J Prosthodont. 2002;15:299–302.
- Zhang Y, Han J, Zheng G, et al. Fatigue behaviours of the zirconia dental restorations prepared by two manufacturing methods. Adv Appl Ceram. 2017;116(7):368–375. doi: 10.1080/17436753.2017.1336365
- Shen Z, Liu L, Xu X, et al. Fractography of self-glazed zirconia with improved reliability. J Eur Ceram Soc. 2017;37(14):4339–4345. DOI:10.1016/j.jeurceramsoc.2017.03.008.
- Komine F, Tomic M, Gerds T, et al. Influence of different adhesive resin cements on the fracture strength of aluminum oxide ceramic posterior crowns. J Prosthet Dent. 2004;92(4):359–364. doi: 10.1016/j.prosdent.2004.07.018
- van Der Vyver PJ, Marais JT, de Wet FA. Repair of Cerec porcelain with seven different systems. J Dent Assoc S Afr. 1996;51(8):525–530.
- Han J, Zhao J, Shen Z. Zirconia ceramics in metal-free implant dentistry. Br Ceram Trans. 2017;116(3):138–150.