Publication Cover
Advances in Applied Ceramics
Structural, Functional and Bioceramics
Volume 119, 2020 - Issue 7
346
Views
5
CrossRef citations to date
0
Altmetric
Research Articles

Preparation of highly porous SiC via ceramic precursor conversion and evaluation of its thermal insulation performance

, , , , &
Pages 398-406 | Received 07 Feb 2020, Accepted 12 Jun 2020, Published online: 06 Jul 2020

References

  • Yamada I, Kume S, Nakano H, et al. Macro- and micro-scale thermal conductivities of SiC single crystal and ceramic. Key Eng Mater. 2009;403:179–183. doi: 10.4028/www.scientific.net/KEM.403.179
  • Koebel M, Rigacci A, Achard P. Aerogel-based thermal superinsulation: an overview. J Sol-Gel Sci Technol. 2012;63:315–339. doi: 10.1007/s10971-012-2792-9
  • Cuce E, Cuce PM, Wood CJ, et al. Toward aerogel based thermal superinsulation in buildings: a comprehensive review. Renew Sust Energ Rev. 2014;34:273–299. doi: 10.1016/j.rser.2014.03.017
  • Jang BK, Sakka Y. Thermophysical properties of porous SiC ceramics fabricated by pressureless sintering. Sci Technol Adv Mat. 2007;8:655–659. doi: 10.1016/j.stam.2007.08.003
  • Eom JH, Kim YW, Song IH, et al. Processing and properties of polysiloxane-derived porous silicon carbide ceramics using hollow microspheres as templates. J Eur Ceram Soc. 2008;28:1029–1035. doi: 10.1016/j.jeurceramsoc.2007.09.009
  • Wan P, Wang JY. Highly porous nano-SiC with very low thermal conductivity and excellent high temperature behavior. J Eur Ceram Soc. 2018;38:463–467. doi: 10.1016/j.jeurceramsoc.2017.09.037
  • Kim YW, Lim KY, Seo WS. Microstructure and thermal conductivity of silicon carbide with yttria and Scandia. J Am Ceram Soc. 2014;97:923–928. doi: 10.1111/jace.12737
  • Gómez-Martín A, Orihuela MP, Ramírez-Rico J, et al. Thermal conductivity of porous biomorphic SiC derived from wood precursors. Ceram Int. 2016;42:16220–16229. doi: 10.1016/j.ceramint.2016.07.151
  • Cho TY, Kim YW. Effect of grain growth on the thermal conductivity of liquid-phase sintered silicon carbide ceramics. J Eur Ceram Soc. 2017;37:3475–3481. doi: 10.1016/j.jeurceramsoc.2017.04.050
  • Feng W, Zhang LT, Liu YS, et al. Increasing the thermal conductivity of 2D SiC/SiC composites by heat-treatment. Fusion Eng Des. 2015;90:110–118. doi: 10.1016/j.fusengdes.2014.12.005
  • Collins AK, Pickering MA, Taylor RL. Grain size dependence of the thermal conductivity of polycrystalline chemical vapor deposited -SiC at low temperatures. J Appl Phys. 1990;68:6510–6512. doi: 10.1063/1.346852
  • Lee SG, Fourcade J, Latta R, et al. Polymer impregnation and pyrolysis process development for improving thermal conductivity of SiCp/SiC–PIP matrix fabrication. Fusion Eng Des. 2008;83:713–719. doi: 10.1016/j.fusengdes.2008.04.008
  • Vakifahmetoglu C. Fabrication and properties of ceramic 1D nanostructures from preceramic polymers: a review. Adv Appl Ceram. 2011;110:188–204. doi: 10.1179/1743676111Y.0000000007
  • Colombo P, Mera G, Riedel R, et al. Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics. J Am Ceram Soc. 2010;93:1805–1837.
  • Miele P, Bernard S, Cornu D, et al. Recent developments in polymer-derived ceramic fibers (PDCFs): preparation, properties and applications – a review. Soft Mater. 2007;4:249–286. doi: 10.1080/15394450701310228
  • Bongio EV, Lewis SL, Welson DR, et al. Polymer derived ceramic matrix composites for friction applications. Adv Appl Ceram. 2009;108(8):483–487. doi: 10.1179/174367609X459522
  • Li S, Duan WY, Zhao T, et al. The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology. J Eur Ceram Soc. 2018;38:4597–4603. doi: 10.1016/j.jeurceramsoc.2018.06.046
  • Bill J, Kamphowe TW, Müller A, et al. Precursor-derived Si-(B-)C-N ceramics: thermolysis, amorphous state and crystallization. Appl Organometal Chem. 2001;15:777–793. doi: 10.1002/aoc.242
  • Zhong XQ, Pei XL, Miao YL, et al. Accelerating the crosslinking process of hyperbranched polycarbosilane by UV irradiation. J Eur Ceram Soc. 2017;37:3263–3270. doi: 10.1016/j.jeurceramsoc.2017.03.063
  • Ji P, Pei XL, Miao YL, et al. Effect of ultraviolet irradiation on the cross-linking process and ceramic yield of liquid hyperbranched polycarbosilane. Adv Appl Ceram. 2017;116:445–451. doi: 10.1080/17436753.2017.1352110
  • Eom JH, Kim YW, Raju S. Processing and properties of macroporous silicon carbide ceramics: a review. J Asian Ceram Soc. 2013;1:220–242. doi: 10.1016/j.jascer.2013.07.003
  • Wang F, Yin JW, Yao DX, et al. Fabrication of porous SiC ceramics through a modified gelcasting and solid state sintering. Mater Sci Eng A. 2015;654:292–297. doi: 10.1016/j.msea.2015.12.061
  • Eom JH, Kim YW, Song IH. Effects of the initial α-SiC content on the microstructure, mechanical properties, and permeability of macroporous silicon carbide ceramics. J Eur Ceram Soc. 2012;32:1283–1290. doi: 10.1016/j.jeurceramsoc.2011.11.040
  • Roy S, Schell KG, Bucharsky EC, et al. Processing and elastic property characterization of porous SiC preform for interpenetrating metal/ceramic composites. J Am Ceram Soc. 2012;95:3078–3083. doi: 10.1111/j.1551-2916.2012.05347.x
  • Song IH, Kwon IM, Kim HD, et al. Processing of microcellular silicon carbide ceramics with a duplex pore structure. J Eur Ceram Soc. 2010;30:2671–2676. doi: 10.1016/j.jeurceramsoc.2010.04.027
  • Eom JH, Jang DH, Kim YW, et al. Low temperature processing of porous silicon carbide ceramics by carbothermal reduction. J Korean Ceram Soc. 2006;43:552–557. doi: 10.4191/KCERS.2006.43.9.552
  • Jang DH, Kim YW, Song IH, et al. Processing of highly porous, open-cell, microcellular silicon carbide ceramics by expansion method using expandable microspheres. JCeram Soc Jpn. 2006;114:549–553. doi: 10.2109/jcersj.114.549
  • Eom JH, Kim YW, Song IH. Effect of SiC filler content on microstructure and flexural strength of highly porous SiC ceramics fabricated from carbon-filled polysiloxane. J Korean Ceram Soc. 2012;49:625–630. doi: 10.4191/kcers.2012.49.6.625
  • Li X, Pei XL, Zhong XQ, et al. Highly effective free-radical-catalyzed curing of hyperbranched polycarbosilane for near stoichiometric SiC ceramics. J Am Ceram Soc. 2019;102:1041–1048. doi: 10.1111/jace.15966
  • Job N, Panariello F, Crine M, et al. Rheological determination of the sol-gel transition during the aqueous synthesis of resorcinol-formaldehyde resins. Colloids Surf A. 2007;293:224–228. doi: 10.1016/j.colsurfa.2006.07.037
  • Zhang J, Cao YW, Feng JC, et al. Graphene-oxide-sheet-induced gelation of cellulose and promoted mechanical properties of composite aerogels. J Phys Chem C. 2012;116:8063–8068. doi: 10.1021/jp2109237
  • Li HB, Zhang LT, Cheng LF, et al. Effect of the polycarbosilane structure on its final ceramic yield. J. Eur Ceram Soc. 2008;28:887–891. doi: 10.1016/j.jeurceramsoc.2007.07.020
  • Liu Q, Wu HJ, Lewis R, et al. Investigation of the pyrolytic conversion of poly(silylenemethylene) to silicon carbide. J Chem Mater. 1999;11:2038–2048. doi: 10.1021/cm981067c
  • Su L, Wang HJ, Niu M, et al. Ultralight, recoverable, and high-temperature-resistant SiC nanowire aerogel. ACS Nano. 2018;12:3103–3111. doi: 10.1021/acsnano.7b08577
  • Li BB, Yuan XS, Gao Y, et al. A novel SiC nanowire aerogel consisted of ultra long SiC nanowires. Mater Res Express. 2019;6:045030. doi: 10.1088/2053-1591/aafaef
  • Pappacena KE, Faber KT, Wang H, et al. Thermal conductivity of porous silicon carbide derived from wood precursors. J Am Ceram Soc. 2007;90:2855–2862. doi: 10.1111/j.1551-2916.2007.01777.x
  • Liang CY, Wang ZF, Wu LN, et al. Light and strong hierarchical porous SiC foam for efficient electromagnetic interference shielding and thermal insulation at elevated temperatures. ACS Appl Mater Interfaces. 2017;9:29950–29957. doi: 10.1021/acsami.7b07735
  • Shimizu T, Matsuura K, Furue H, et al. Thermal conductivity of high porosity alumina refractory bricks made by a slurry gelation and foaming method. J Eur Ceram Soc. 2013;33:3429–3435. doi: 10.1016/j.jeurceramsoc.2013.07.001

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.