References
- Fabris S, Paxton AT, Finnis MW. A stabilization mechanism of zirconia based on oxygen vacancies only. Acta Mater. 2002;50(20):5171–5178. doi: 10.1016/S1359-6454(02)00385-3
- Han J, Zhao J, Shen Z. Zirconia ceramics in metal-free implant dentistry. Adv Appl Ceram. 2017;116:138–150. doi: 10.1080/17436753.2016.1264537
- Hannink RH, Kelly PM, Muddle BC. Transformation toughening in zirconia-containing ceramics.pdf. J Am Ceram Soc. 2000;83:462–486.
- Heuer AH. Transformation toughening in ZrO2-containing ceramics. J Am Ceram Soc. 1987;70:689–698. doi: 10.1111/j.1151-2916.1987.tb04865.x
- Matsui K, Yoshida H, Ikuhara Y. Review: microstructure-development mechanism during sintering in polycrystalline zirconia. Int Mater Rev. 2018;63:375–406. doi: 10.1080/09506608.2017.1402424
- Mazaheri M, Simchi A, Golestani-Fard F. Densification and grain growth of nanocrystalline 3Y-TZP during two-step sintering. J Eur Ceram Soc. 2008;28:2933–2939. doi: 10.1016/j.jeurceramsoc.2008.04.030
- Anselmi-Tamburini U, Garay JE, Munir ZA, et al. Spark plasma sintering and characterization of bulk nanostructured fully stabilized zirconia: part I. Densification studies. J Mater Res. 2004;19:3255–3262. doi: 10.1557/JMR.2004.0423
- Chintapalli R, Mestra A, García Marro F, et al. Stability of nanocrystalline spark plasma sintered 3Y-TZP. Materials. 2010;3:800–814. doi: 10.3390/ma3020800
- Zhang F, Vanmeensel K, Inokoshi M, et al. 3Y-TZP ceramics with improved hydrothermal degradation resistance and fracture toughness. J Eur Ceram Soc. 2014;34:2453–2463. doi: 10.1016/j.jeurceramsoc.2014.02.026
- Zhang F, Vanmeensel K, Inokoshi M, et al. Critical influence of alumina content on the low temperature degradation of 2–3mol% yttria-stabilized TZP for dental restorations. J Eur Ceram Soc. 2015;35:741–750. doi: 10.1016/j.jeurceramsoc.2014.09.018
- Abdullah AO, Hui Y, Pollington S, et al. Comparative effectiveness of multiple laser scanning and conventional techniques on zirconia shear bond strength. Coatings. 2019;9:422. doi: 10.3390/coatings9070422
- Guo X. Property degradation of tetragonal zirconia induced by low-temperature defect reaction with water molecules. Chem Mater. 2004;16:3988–3994. doi: 10.1021/cm040167h
- Lughi V, Sergo V. Low temperature degradation -aging- of zirconia: a critical review of the relevant aspects in dentistry. Dent Mater. 2010;26:807–820. doi: 10.1016/j.dental.2010.04.006
- Zhang N, Asle Zaeem M. Effects of twin boundaries and pre-existing defects on mechanical properties and deformation mechanisms of yttria-stabilized tetragonal zirconia. J Eur Ceram Soc. 2020;40:108–114. doi: 10.1016/j.jeurceramsoc.2019.09.017
- Hu W, Liu S, Zhang Y, et al. Annealing-induced {011}-specific cyclic twins in tetragonal zirconia Nanoparticles. J Phys Chem C. 2012;116:21052–21058. doi: 10.1021/jp305881r
- Mercer C, Williams JR, Clarke DR, et al. On a ferroelastic mechanism governing the toughness of metastable tetragonal-prime (t′) yttria-stabilized zirconia. Proc R Soc A Math Phys Eng Sci. 2007;463:1393–1408.