References
- Hanson W, Ironside K, Fernie J. Active metal brazing of zirconia. Acta Mater. 2000;48(18):4673–4676.
- Tietz F, Nikolopoulos P. Metal/ceramic interface properties and their effects on SOFC development. Fuel Cells. 2009;9(6):867–872.
- Tanaka T, Matsumura K, Komorita H, et al. Bonded ceramic-metal composite substrate, circuit board constructed therewith and methods for production thereof. Microelectron Reliab. 1991;31(5):1058.
- Nagel R, Hahn H, Balogh AG. Diffusion processes in metal/ceramic interfaces under heavy ion irradiation. Nucl Instrum Meth Phys Res Sect B-Beam Interact Mater Atoms. 1999;148(1):930–935.
- Ray AK, Bose SC, De PK, et al. Lifetime evaluation of a thick thermal barrier coated superalloy used in turbine blade. Mater Sci Eng A-Struct Mater Prop Microstruct Proces. 2010;527(21):5474–5483.
- Zhang J, Zhang J, Li L, et al. Stress analysis of the brazing joints of tubular ceramic oxygen-permeable membranes and metal supports. Ceram Int. 2019;45(2):1545–1553.
- Zhang Y, Liu T, Zhang J, et al. Induction brazing BaCo0.7Fe0.2Nb0.1O3-delta membrane tubes to steel supports with Ag-based filler in air. J Memb Sci. 2017;533:19–27.
- Walker CA, Hodges VC. Comparing metal-ceramic brazing methods. Weld J. 2008;87(10):43–50.
- Yadav DP, Kaul R, Ganesh P, et al. Study on vacuum brazing of high purity alumina for application in proton synchrotron. Mater Des. 2014;64:415–422.
- Hosseinabadi N, Sarraf-Mamoory R, Mohammad Hadian A. Diffusion bonding of alumina using interlayer of mixed hydride nano powders. Ceram Int. 2014;40(2):3011–3021.
- Travessa D, Ferrante M, Ouden GD. Diffusion bonding of aluminium oxide to stainless steel using stress relief interlayers. Mater Sci Eng A (Struct Mater: Prop Microstruct Proces). 2002;337(1–2):287–296.
- Sayyedain SS, Salimijazi HR, Toroghinejad MR, et al. Microstructure and mechanical properties of transient liquid phase bonding of [formula omitted]/Al nanocomposite using copper interlayer. Mater Des. 2014;53:275–282.
- Xiong HP, Chen B, Pan Y, et al. A Cu-Pd-V system filler alloy for silicon nitride ceramic joining and the interfacial reactions. J Am Ceram Soc. 2014;97(8):2447–2454.
- Leon-Patiño CA, Aguilar-Reyes EA, Braulio-Sánchez M, et al. Microstructure and shear strength of sintered Cu–Al2O3 composite joined to Cu using Ag–Cu and Cu–Zn filler alloys. Mater Des. 2014;54:845–853.
- Wang Y, Yang ZW, Zhang LX, et al. Low-temperature diffusion brazing of actively metallized Al2O3 ceramic tube and 5A05 aluminum alloy. Mater Des. 2015;86:328–337.
- Halbig MC, Coddington BP, Asthana R, et al. Characterization of silicon carbide joints fabricated using SiC particulate-reinforced Ag–Cu–Ti alloys. Ceram Int. 2013;39(4):4151–4162.
- Wang N, Wang DP, Yang ZW, et al. Interfacial microstructure and mechanical properties of zirconia ceramic and niobium joints vacuum brazed with two Ag-based active filler metals. Ceram Int. 2016;42(11):12815–12824.
- Wang N, Wang DP, Yang ZW, et al. Zirconia ceramic and Nb joints brazed with Mo-particle-reinforced Ag-Cu-Ti composite fillers: interfacial microstructure and formation mechanism. Ceram Int. 2017;43(13):9636–9643.