Effect of the distribution of lip-shaped matrix cracks in continuous fibre reinforced ceramic matrix composites on failure progress under transverse tension

References

• Naslain R. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview. Compos Sci Technol. 2004;64:155–170.
   Web of Science ®Google Scholar
• Meyer P, Waas A. FEM predictions of damage in continous fiber ceramic matrix composites under transverse tension using the crack band method. Acta Mater. 2016;102:292–303.
   Web of Science ®Google Scholar
• Juhong L, Yanqing Y, Xian L. Effects of fiber volume fraction on transverse tensile properties of SiC/Ti-6Al-4V composites. Rare Met Eng. 2011;40(4):575–579.
   Web of Science ®Google Scholar
• Mahmoodia MJ, Aghdamb MM. Damage analysis of fiber reinforced Ti-alloy subjected to multi-axial loading a micromechanical approach. Mater Sci Eng A. 2011;528(27):7983–7990.
   PubMed Web of Science ®Google Scholar
• Correa E, Mantic V, París F. Effect of thermal residual stresses on matrix failure under transverse tension. Compos Sci Technol. 2011;71:622–629.
   Web of Science ®Google Scholar
• Trias D, Costa J, Mayugo J, et al. Random models versus periodic models for fibre reinforced composites. Comput Mater Sci. 2006;38(2):316–324.
   Web of Science ®Google Scholar
• Weng J, Wen W, Cui H, et al. Micromechanical analysis of composites with fibers distributed randomly over the transverse cross-section. Acta Astronaut. 2018;147:133–140.
   Web of Science ®Google Scholar
• Kim HG, Ji W, Cho NC, et al. Effects of nonuniform fiber geometries on the microstructural fracture behavior of ceramic matrix composites. Math Probl Eng. 2019;2019(2):1–15.
   Google Scholar
• Mayer CR, Molina-Aladareguia J, Chawla N. Three dimensional (3D) microstructure-based finite element modeling. Mater Charact. 2016;120:369–376.
   Web of Science ®Google Scholar
• Romanov V, Lomov SV, Swolfs Y, et al. Statistical analysis of real and simulated fibre arrangements in unidirectional composites. Compos Sci Technol. 2013;87:126–134.
   Web of Science ®Google Scholar
• Corso FD, Deseri L. Residual stresses in random elastic composites: nonlocal micromechanics-based models and first estimates of the representative volume element size. Meccanica. 2013;48(8):1901–1923.
   Web of Science ®Google Scholar
• Soni G, Singh R, Mitra M, et al. Modelling matrix damage and Fibre–matrix interfacial decohesion in composite laminates via a multi-fibre multi-layer representative volume element (m2rve). Int J Solids Struct. 2014;51(2):449–461.
   Web of Science ®Google Scholar
• Kanit T, Forest S, Galliet I, et al. Determination of the size of the representative volume element for random composites: statistical and numerical approach. Int J Solids Struct. 2003;40(13-14):3647–3679.
   Web of Science ®Google Scholar
• González C, Lorca J. Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression. Microscopic mechanisms and modeling. Compos Sci Technol. 2007;67(13):2795–2806.
   Web of Science ®Google Scholar
• Song L, Meng S, Xu C, et al. Finite element-based phase-field simulation of interfacial damage in. Modell Simul Mater Sci Eng. 2019;27(5):1–20.
   Web of Science ®Google Scholar
• Zhi J, Zhao L, Zhang J, et al. A numerical method for simulating the microscopic damage evolution in composites under uniaxial transverse tension. Appl Compos Mater. 2015;23; doi:10.1007/s10443-015-9459-y.
   Web of Science ®Google Scholar
• Bhuiyan FH, Sanei SHR, Iii RSF. Predicting variability in transverse effective elastic moduli and failure initiation strengths in UD composite microstructures due to randomness in fiber location and morphology. Compos Struct. 2020;237:111887.
   Web of Science ®Google Scholar
• Pai P, Meiying Z, Wang W. Transverse strength prediction of composite materials via micromechanics model. Mech Sci Technol Aerosp Eng. 2017;36(10):1611–1618. (in Chinese).
   Google Scholar
• Yang L, Yan Y, Liu Y, et al. Microscopic failure mechanisms of fiber-reinforced polymer composites under transverse tension and compression. Compos Sci Technol. 2012;72(15):1818–1825.
   Web of Science ®Google Scholar
• Palizvan M, Homayuon Sadr M, Tahaye Abadi M. Effect of interface properties on micromechanical damage behavior of fiber reinforced composites. Mater Today Commun. 2019; doi:10.1016/j.mtcomm.2019.100856.
   Web of Science ®Google Scholar
• Zhenyu X, Ruojing Z, Lu Y. Global elastic constants of fiber reinforced composites with random distribution cracks in matrix. Fiber ReinfPlast/Compos. 2002;5:7–9. 33. (in Chinese).
   Google Scholar
• Huang H, Talreja R. Effects of void geometry on elastic properties of unidirectional fiber reinforced composites. Compos Sci Technol. 2005;65(13):1964–1981.
   Web of Science ®Google Scholar
• Kim RY, Pagano NJ. Crack initiation in unidirectional brittle-matrix composites. J Ceram Soc Am. 1991;74:1082–1090.
   Web of Science ®Google Scholar
• Garret KW, Bailey JE. Multiple transverse fracture in 90° cross-ply laminates of a glass fiber-reinforced polyester. J Mater Sci. 1977;12:157–168.
   Web of Science ®Google Scholar
• Hyde A, He J, Cui X, et al. Effects of microvoids on strength of unidirectional fiber-reinforced composite materials. Compos B: Eng. 2020;187:107844.
   Web of Science ®Google Scholar
• Ashouri Vajari D, González C, Llorca J, et al. A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites. Compos Sci Technol. 2014;97:46–54.
   Web of Science ®Google Scholar
• Yongdong X, Laifei C, Litong Z, et al. Research on continuous fiber reinforced sil icon carbid e composites. J Chin Ceram Soc. 2002;30(2):184–188. (in Chinese).
   Google Scholar
• Zhilong Z, Qizhi W, Fei S. Numerical simulation of C/SiC Plain Weave composites with defects under unidirectional tension. J Aeronaut Mater. 2017;37(4):61–68.
   Google Scholar
• Zhen-Bang K. Stress analysis of polygonal defects with plane curvature of only sharp points. Chin J Theor Appl Mech. 1979;02:118–128. (in Chinese).
   Google Scholar
• Muskhelishvili NI. Some basic problems of the mathematical theory of elasticity, 4th edn. Noordhoff, Groningen. 1954; 526.
   Google Scholar
• Jialin L, Yumin W, Guoxing Z, et al. Research on single SiC fiber reinforced TC17 composites under transverse tension. Acta Metall Sinica. 2018;54(12):1809–1817. (in Chinese).
   Web of Science ®Google Scholar
• Sandino C, Correa E, París F. Numerical analysis of the influence of a nearby fibre on the interface crack growth in composites under transverse tensile load. Eng Fract Mech. 2016: S0013794416000503.
   Web of Science ®Google Scholar
• Hailong X. Crack propagation of weak interface of continuous ceramic matrix composites. Tianjin, Civil Aviation University of China. 2020;23–44. (in Chinese).
   Google Scholar
• Wang X, Zhang J, Wang Z, et al. Effects of interphase properties in unidirectional fiber reinforced composite materials. Mater Des. 2011;32(6):3486–3492.
   Web of Science ®Google Scholar